YA GEO CORPORATION ALUMINUM ELECTR OLYTIC CAPACITORS
Miniature Size Aluminum
Electrolytic Capacitors SC
105°C Single-Ended Lead Aluminum Electrolytic Capacitors For High Frequency Applications
DESCRIPTION
Used in switching regulator applications in
computer s. Especially for high frequency.
Low impedance and E.S.R., high permissible
ripple current at high frequency and higher
operating temperature (-40ºC to +105ºC).
High Temperature Load Life at 105ºC for
3000 Hours
For Detail Specifications, Please Refer to
Engineering Bulletin No. 2063
ELECTRICAL CHARA CTERISTICS
Working Voltage : 6.3 ~ 100V
Operating Temperature : -40º ~ +105ºC
Rate Capacitance Range : 4.7 ~ 15000µF
Capacitance Tolerance : -20 ~ +20%
DC Leakage Current (µA) : I = 0.01 CV(µA) or 3µA Whichever is greater.
( Measurements shall be Made After a 2 Minute Charge at Rated Working Voltage )
Dissipation Factor : at 120 Hz, 25ºC
WV (V): 6.3 10 16 25 35 50 63 80 100
D.F (%) : 15 14 12 10 10 8 8 7 7
For capacitor whose capacitance exceeds 1000µF. The value of D.F(%) is increased by 2% for ever y
addition of 1000µF.
WV (V) : 6.3 10 16 25 35 50 63 100
Impedance : Z - 40°C / Z + 20°C108544444
Load Life : 3000 Hours at 105ºC Assured with Full Rated Maximum Ripple Current Applied
5 x 11 ~ 10 x 12 : Life = 2000 Hours
10 x 15 or Higher : Life = 3000 Hours
(a) Capacitance Change : Within 20% of Initial Value
(b) Dissipation Factor : Not Exceed 200% of Initial Requirement
(c) Leakage Cur rent : Not Exceed the Initial Requirement
Shelf Life : 1000 Hours, No Voltage Applied, at 105ºC
(a) Capacitance Change : Within 20% of Initial Value
(b) Dissipation Factor : Not Exceed 200 % of Initial Requirement
(c) Leakage Current : Not Exceed 200% of Initial Requirement
[ For Low Impedance and Low E.S.R
Suitable for Output of Mother Board ]
DIA GRAM OF DIMENSIONS
Dø F dø
4.0 1.5 0.45
5.0 2.0 0.5
6.0 2.5
8.0 3.5
10.0 5.0 0.6
12.0
13.0
16.0 7.5 0.8
18.0
22.0 10.0 0.8
Dimensions : mm
Rubber End Seal
Vinyl Sleeve
(P.V.C)
L 15Min. D±0.5
F±0.5
5Min.
L15Min.
0.4Max.
D±0.5
F±0.5
Rubber End Seal
Vinyl Sleeve
(P.V.C)
5Min.
Rubber Stand-off
L≤12 L + 1.5Max.
13≤L≤15 L
L≥16 L + 2.0Max.
+1.0
-0.5