Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ KA
– EEE-119 –
φD±0.5
φd±0.05
F±0.5
Sleeve
14 min.
3 min.
L±1.0
+
–
■Features
● Endurance : 85° C 1000 h
● 7 mm height
● RoHS directive compliant
■Di men sions in mm (not to scale)
■Specifi cations
Category Temp. Range –40 °C to +85 °C
Rated W.V. Range 4 V.DC to 50 V.DC
Nominal Cap. Range 0.1 µ F to 470 µF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater)
tan δPlease see the attached standard products list
Endurance
After applying rated working voltage for 1000 hours at +85 °C±2 °C when the capacitors are
restored to 20 °C, capacitors shall meet the following limits.
Capacitance change ± 20% of initial measured value
tan δ< 200 % of initial specifi ed value
DC leakage current < initial specifi ed value
Shelf Life After storage for 1000 hours at +85 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance (With voltage treatment)
Radial Lead Type
Series: KA Type: A
M
KA
7 mm height
앖
Low Profi le
Body Dia. φD4 5 6.3 8
Lead Dia. φd0.45 0.45 0.45 0.45
Lead space F 1.5 2.0 2.5 3.5
Frequency (Hz)
50, 60 120 1 k 10 k to
Correction factor 0.70 1.00 1.30 1.70
■Frequency correction factor for ripple current
(Unit : mm)
00 Nov. 2012
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ KA
– EEE-120 –
■Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(120 Hz)
(+85 °C
)
tan δ
(120 Hz)
(+20 °C)
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
Taping
✽i
(V) (µF) (mm) (mm)
(mA r.m.s.)
(mm) (mm) (mm) (mm) (pcs) (pcs)
4
47 4 7 34 0.35 0.45 1.55.02.5
ECEA0GKA470( ) 200 2000
100 5 7 61 0.35 0.45 2.0 5.0 2.5 ECEA0GKA101( ) 200 2000
220 6.3 7 82 0.35 0.45 2.5 5.0 2.5 ECEA0GKA221( ) 200 2000
330 871100.350.453.5 2.5
ECEA0GKA331( ) 200 1000
871100.350.45 5.0 ECEA0GKA331Q 1000
470 871400.350.453.5 2.5
ECEA0GKA471( ) 200 1000
871400.350.45 5.0 ECEA0GKA471Q 1000
6.3
47 4 7 46 0.24 0.45 1.55.02.5
ECEA0JKA470( ) 200 2000
100 5 7 71 0.24 0.45 2.0 5.0 2.5 ECEA0JKA101( ) 200 2000
220 6.3 7 103 0.24 0.45 2.5 5.0 2.5 ECEA0JKA221( ) 200 2000
330 871300.240.453.5 2.5
ECEA0JKA331( ) 200 1000
871300.240.45 5.0 ECEA0JKA331Q 1000
10
33 4 7 43 0.20 0.45 1.55.02.5
ECEA1AKA330( ) 200 2000
100 6.3 7 80 0.20 0.45 2.5 5.0 2.5 ECEA1AKA101( ) 200 2000
220 871200.200.453.5 2.5
ECEA1AKA221( ) 200 1000
871200.200.45 5.0 ECEA1AKA221Q 1000
16
10 4 7 28 0.16 0.45 1.55.02.5
ECEA1CKA100( ) 200 2000
22 4 7 39 0.16 0.45 1.55.02.5
ECEA1CKA220( ) 200 2000
33 5 7 60 0.16 0.45 2.05.02.5
ECEA1CKA330( ) 200 2000
47 5 7 70 0.16 0.45 2.05.02.5
ECEA1CKA470( ) 200 2000
100 6.3 7 91 0.16 0.45 2.5 5.0 2.5 ECEA1CKA101( ) 200 2000
25
10 4 7 28 0.14 0.45 1.5 5.0 2.5 ECEA1EKA100( ) 200 2000
22 5 7 55 0.14 0.45 2.05.02.5
ECEA1EKA220( ) 200 2000
33 6.3 7 65 0.14 0.45 2.55.02.5
ECEA1EKA330( ) 200 2000
47 6.3 7 70 0.14 0.45 2.55.02.5
ECEA1EKA470( ) 200 2000
35
10 5 7 30 0.12 0.45 2.05.02.5
ECEA1VKA100( ) 200 2000
22 6.3 7 60 0.12 0.45 2.55.02.5
ECEA1VKA220( ) 200 2000
33 6.3 7 65 0.12 0.45 2.55.02.5
ECEA1VKA330( ) 200 2000
47 87850.12 0.45 3.5 2.5 ECEA1VKA470( ) 200 1000
87850.120.45 5.0 ECEA1VKA470Q 1000
50
0.1 4 7 1 0.10 0.45 1.5 5.0 2.5 ECEA1HKA0R1( ) 200 2000
0.22 4 7 2 0.10 0.45 1.5 5.0 2.5 ECEA1HKAR22( ) 200 2000
0.33 4 7 3 0.10 0.45 1.5 5.0 2.5 ECEA1HKAR33( ) 200 2000
0.47 4 7 5 0.10 0.45 1.5 5.0 2.5 ECEA1HKAR47( ) 200 2000
14 7 100.100.451.5 5.02.5
ECEA1HKA010( ) 200 2000
2.2 4 7 16 0.10 0.45 1.5 5.0 2.5 ECEA1HKA2R2( ) 200 2000
3.3 4 7 18 0.10 0.45 1.5 5.0 2.5 ECEA1HKA3R3( ) 200 2000
4.7 4 7 23 0.10 0.45 1.5 5.0 2.5 ECEA1HKA4R7( ) 200 2000
10 5 7 35 0.10 0.45 2.05.02.5
ECEA1HKA100( ) 200 2000
22 6.3 7 60 0.10 0.45 2.55.02.5
ECEA1HKA220( ) 200 2000
33 87750.10 0.45 3.5 2.5 ECEA1HKA330( ) 200 1000
87750.100.45 5.0 ECEA1HKA330Q 1000
· When requesting taped product, please put the letter "B" or "i" be tween the "( )". Lead wire pitch B=5 mm, i=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
Endurance : 85 °C 1000 h
00 Nov. 2012
