V23818-C10-V10 Small Form Factor Multimode 850 nm LED Ethernet/10BASE-FL/4M-16M Token Ring 1x5 Transceiver with VF-45 Connector Dimensions in (mm) inches (29.84) 1.175 (3.1) .122 (9.51) .374 (6.84) .27 (11.68) .46 (3.8) .15 (7.39) .29 MADE IN USA SANTA CLARA CA V23818-C10-V10 Lot 00001 00001 Rev 02 (9.5) .374 (12.7) .499 (3) .12 Circuit board layout Recommended PCB thickness: max (2.54) 0.1 Bottom view (11.68) .46 (7.39) .29 (3.8) .15 .4 (10.16) (5-1)x0.1=0.4 (10.16) PIN 1 (6x) .043 (1.1) FEATURES * Small Form Factor transceiver unit for RJ-45 style VF-45 connector system * Designed for use in volition cabling systems * 10BASE-FL / 4M-16M Token Ring * System optimized for 62.5 m graded index fiber * Small footprint for high channel density * UL-94 V-0 certified * ESD Class 2 per MIL-STD 883 Method 3015 * Compliant with FCC (Class B) and EN 55022 * For distances of up to 2 km (5x) .032 (0.81) Absolute Maximum Ratings Exceeding any one of these values may destroy the device immediately. Supply Voltage (VCC-VEE) ....................................... -0.5 V to 6 V Data Input Levels (PECL) (VIN)..................................... VEE-VCC Operating Ambient Temperature (TAMB) ... ... ... ... 0C to 70C Storage Ambient Temperature TSTG .................... -40C to 85C Humidity/Temperature Test Condition (RH) ................ 85%/85C Soldering Conditions, Temp/Time (TSOLD/tSOLD) (MIL-STD 883C, Method 2003) .............................. 260C/10 s ESD Resistance (all pins to VEE, human body) .................. 1.5 kV APPLICATIONS * Fiber-to-the-desktop * Ethernet 10BASE-FL / 4M-16M Token Ring * Ethernet switches/bridges/routers * Local area networks * Computer links * Switching systems VolitionTM and VF-45TM are trademarks of 3M Fiber Optics APRIL 1999 DESCRIPTION Receiver Electro-Optical Characteristics The Siemens Ethernet transceiver is part of Siemens Small Form Factor transceiver family. It is fully compliant with the 10BASE-FL / 4M-16M Token Ring standards. This transceiver supports the innovative Volition connectorization concept, which competes with UTP/CAT 5 solutions. It is compatible with RJ-45 style backpanels for fiber-to-the-desktop applications while providing the advantages of fiber optic technology. The receptacle accepts the new VF-45 connector. Ethernet 10BASE-FL is based on the proven effectiveness of millions of installed Ethernet systems. This transceiver is completely interoperable with existing SW solutions for Ethernet and Token Ring. TECHNICAL DATA The electro-optical characteristics described in the following tables are valid only for use under the recommended operating conditions. Parameter Symbol Min. Ambient Temperature TAMB 0 70 C Typ. Max. Units Power Supply Voltage VCC-VEE 5.0 5.5 V Transmitter Forward Voltage If = 60 mA VF 1.48 1.70 2.09 Reversed Input Voltage IR = 10 A VBR 1.8 3.8 Input Data Rise/Fall Time, 20%-80% tR, tF 0.4 V 1.3 ns 15 mA 25 mA Receiver ICC Output Current lO 9 Transmitter Electro-Optical Characteristics Transmitter Symbol Min. Data Rate DR Launched Power (Average) into 62.5 m Fiber(1, 2) PO Center Wavelength(3) C Typ. Max. Units 50 MBaud -17.5 -14.0 -12.5 810 Output Rise/Fall Time (4) tR, tF Symbol Min. Typ. Max. 50 MBaud 7.0 9.6 mV/W -10.6 87.5 dBm W ns Data Rate DR 2 Responsitivity @ 25C(1, 2) R 5.3 Input Power (Average) @ 25C(1, 3) PIN -34 0.4 Output Data Rise/Fall Time, 20%-80%(1, 4) tR, tF 3.6 4.5 Pulse Width Distortion(1, 4) PWD 0.2 1.5 Notes 1. f = 10 MHz, 50% duty cycle, = 850 nm 2. 62.5 m core fiber, PIN = 100 W peak 3. PWD = 2.5 ns 4. PIN = 63 W avg. dBm 850 885 nm 4.0 4.5 ns Feature Standard Comments Electromagnetic Interference (EMI) FCC Class B EN 55022 Class B CISPR 22 Noise frequency range:30 MHz to 1 GHz Immunity: Electrostatic Discharge EN 61000-4-2 IEC 1000-4-2 Discharges of 15kV with an air discharge probe on the receptacle cause no damage. Immunity: Radio Frequency Electromagnetic Field EN 61000-4-3 IEC 1000-4-3 With a field strength of 10 V/m rms, noise frequency ranges from 10 MHz to 1 GHz Eye Safety IEC 825-1 Class 1 Pin Description Pin Name Pin# Description RD 1 Rx Output Data GND GROUND 2 RxVCC Rx 5 V 3 Receiver output data Positive power supply, 5 V Cat. LED Cathode 4 LED Cathode An LED Anode 5 LED Anode Suggested Application Note Notes 1. IF = 32 mA Peak, 50% duty cycle. Maximum degradation at end of life = 2dB. LED Driver 2. Input data pattern is a 12.5 MHz square wave signal. 3. IF = 60 mA dc. 4. 10%-90%, IF = 60 mA Peak, No Prebias Units Regulatory Compliance Recommended Operating Conditions Power Supply Current RLOAD = 0 Receiver GND PIN Preamp Module Amplifier Filtered VCC Infineon Technologies AG i.Gr. * Fiber Optics * Wernerwerkdamm 16 * Berlin D-13623, Germany Infineon Technologies, Corp. * Fiber Optics * 19000 Homestead Road * Cupertino, CA 95014 USA Siemens K.K. * Fiber Optics * Takanawa Park Tower * 20-14, Higashi-Gotanda, 3-chome, Shinagawa-ku * Tokyo 141, Japan www.infineon.com/fiberoptics