FLZ CONNECTOR 0.5mm Emboss Tape Connectors for FFC and FPC (.020") pitch Features------------------------ * Zero insertion force mechanism A ZIF mechanism increases wear resistance and extends the connector's mating life. * Heat resistant design suitable for surface mounting This housing is made of heat resistant plastic to allow reflow soldering. * In-line surface mount tails Has an in-line surface mount tails for easy inspection. * Two types of connections The connector is available in either the normal or reverse configurations. The FFC/FPC is positioned with its mating surfaces facing upward for the normal configured connector, while the reverse configuration requires that the FFC/FPC be positioned with its mating surfaces facing down. The engineer This extremely small 0.5mm (.020") pitch connector with a height of only 2.0mm (.079") above the PCB surface allows interconnection in extremely small spaces and is an example of JST's leading edge technology. has greater freedom in designing his circuitry. * Embossed tape for automatic mounting The FLZ connector can be packaged in embossed tape for automatic mounting. Specifications ------------------- * Current rating: 0.5A AC, DC * Voltage rating: 50V AC, DC * Temperature range: -25C to +85C (including temperature rise in applying electrical current) * Contact resistance: Initial value/40m max. After environmental testing/60m max. * Insulation resistance: 800M min. * Withstanding voltage: 200V AC/minute * Applicable FFC and FPC: Lead pitch/0.5mm(.020") Lead width/0.35mm(.014") Mating part thickness/ 0.300.03mm(.012" .001") <Note>FFC and FPC to be actually used should be checked for applicability. HJ ST * Contact JST if Lead-Free product is required. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. Standards ---------------------- 0 Recognized E60389 1 Certified LR20812 492 FLZ CONNECTOR Connector --------------------------------------------------------------- Reverse type 2.0 (.079) 3.2(.126) 4.6(.181) [0.7 (.028)] 0.2(.008) 0.2(.008) 1.9 (.075) 4.6(.181) HJST B A 0.5(.020) [0.7 (.028)] 2.0 (.079) 3.2(.126) HJST B A 0.5(.020) 1.9 (.075) Normal type Model No. Dimensions mm(in.) Circuits Normal type Reverse type A B Q'ty / reel 6 06FLZ-SM1-TB 06FLZ-RSM1-TB 2.5(.098) 8.9(.350) 2,000 7 07FLZ-SM1-TB 07FLZ-RSM1-TB 3.0(.118) 9.4(.370) 2,000 8 08FLZ-SM1-TB 08FLZ-RSM1-TB 3.5(.138) 9.9(.390) 2,000 9 09FLZ-SM1-TB 09FLZ-RSM1-TB 4.0(.157) 10.4(.409) 2,000 10 10FLZ-SM1-TB 10FLZ-RSM1-TB 4.5(.177) 10.9(.429) 2,000 11 11FLZ-SM1-TB 11FLZ-RSM1-TB 5.0(.197) 11.4(.449) 2,000 12 12FLZ-SM1-TB 12FLZ-RSM1-TB 5.5(.217) 11.9(.469) 2,000 13 13FLZ-SM1-TB 13FLZ-RSM1-TB 6.0(.236) 12.4(.488) 2,000 14 14FLZ-SM1-TB 14FLZ-RSM1-TB 6.5(.256) 12.9(.508) 2,000 15 15FLZ-SM1-TB 15FLZ-RSM1-TB 7.0(.276) 13.4(.528) 2,000 16 16FLZ-SM1-TB 16FLZ-RSM1-TB 7.5(.295) 13.9(.547) 2,000 17 17FLZ-SM1-TB 17FLZ-RSM1-TB 8.0(.315) 14.4(.567) 2,000 18 18FLZ-SM1-TB 18FLZ-RSM1-TB 8.5(.335) 14.9(.587) 2,000 19 19FLZ-SM1-TB 19FLZ-RSM1-TB 9.0(.354) 15.4(.606) 2,000 20 20FLZ-SM1-TB 20FLZ-RSM1-TB 9.5(.374) 15.9(.626) 2,000 21 21FLZ-SM1-TB 21FLZ-RSM1-TB 10.0(.394) 16.4(.646) 2,000 22 22FLZ-SM1-TB 22FLZ-RSM1-TB 10.5(.413) 16.9(.665) 2,000 23 23FLZ-SM1-TB 23FLZ-RSM1-TB 11.0(.433) 17.4(.685) 2,000 24 24FLZ-SM1-TB 24FLZ-RSM1-TB 11.5(.453) 17.9(.705) 2,000 25 25FLZ-SM1-TB 25FLZ-RSM1-TB 12.0(.472) 18.4(.724) 2,000 26 26FLZ-SM1-TB 26FLZ-RSM1-TB 12.5(.492) 18.9(.744) 2,000 27 27FLZ-SM1-TB 27FLZ-RSM1-TB 13.0(.512) 19.4(.764) 2,000 28 28FLZ-SM1-TB 28FLZ-RSM1-TB 13.5(.531) 19.9(.783) 2,000 30 30FLZ-SM1-TB 30FLZ-RSM1-TB 14.5(.571) 20.9(.823) 2,000 33 33FLZ-SM1-TB - 16.0(.630) 22.4(.882) 2,000 Material and Finish Contact: Phosphor bronze, tin/lead-plated Slider housing: Nylon 46, UL94V-0 (black) Receptacle housing: Nylon 46, UL94V-0 ( )FLZ-SM1-TB, gray ( )FLZ-RSM1-TB, natural Solder tab: Phosphor bronze, tin/lead-plated Note: The products listed above are supplied on embossed tape. 493 FLZ CONNECTOR Connector <Inner-lock type> ------------------------------------------------ Reverse type 3.6(.142) 1.9 (.075) 5.1(.201) 3.6(.142) 5.1(.201) HJST 0.2 (.008) HJST B A 0.5(.020) 0.7 (.028) Circuits 0.7 (.028) 0.2 (.008) B A 0.5(.020) 1.9 (.075) Normal type Model No. Dimensions mm(in.) A B Q'ty / reel 13FLZ-RSM1-R-TB 6.0(.236) 13.1( .516) 2,000 - 14.5(.571) 21.6( .850) 2,000 32FLZ-SM1-R-TB 32FLZ-RSM1-R-TB 15.5(.610) 22.6( .890) 2,000 34 34FLZ-SM1-R-TB 34FLZ-RSM1-R-TB 16.5(.650) 23.6( .929) 2,000 36 36FLZ-SM1-R-TB 36FLZ-RSM1-R-TB 17.5(.689) 24.6( .969) 2,000 40 40FLZ-SM1-R-TB 40FLZ-RSM1-R-TB 19.5(.768) 26.6(1.047) 2,000 42 42FLZ-SM1-R-TB - 20.5(.807) 27.6(1.087) 2,000 45 45FLZ-SM1-R-TB - 22.0(.866) 29.1(1.146) 2,000 50 50FLZ-SM1-R-TB - 24.5(.965) 31.6(1.244) 2,000 Normal type Reverse type 13 - 30 30FLZ-SM1-R-TB 32 Material and Finish Contact: Phosphor bronze, tin/lead-plated Slider housing: Nylon 46, UL94V-0 (black) Receptacle housing: Nylon 46, UL94V-0 ( )FLZ-SM1-R-TB, gray ( )FLZ-RSM1-R-TB, natural Solder tab: Phosphor bronze, tin/lead-plated Note: 1. The products listed above are supplied on embossed tape. 2. 45FLZ-SM1-R-TB and 50FLZ-SM1-R-TB are not CSA approved. 494 FLZ CONNECTOR Taping specifications ------------------------------------------------------ Feeding direction 3302.0(12.992.079)dia. Feeding direction [13(.512)dia.] + .098 W1 +- 2.5 1.0 (- .039 ) Leader part 100(3.937)min. The end part Connector 160(6.299)min. mounting part 400(15.748)min. Cover tape 12.0 0.1 (.472.004) W 0.3(.012) F 0.1 (.004) S 0.1(.004) 12.0 0.1 (.472.004) Reel dimensions mm(in.) Taping dimensions mm(in.) Cover tape Carrier tape Carrier tape [6.75 (.266)] F 0.1 (.004) 4.0 0.1 2.0 0.1 (.157 .004) (.079.004) Feeding direction W 0.3(.012) 4.0 0.1 2.0 0.1 (.157.004) (.079.004) 1.75 0.1 (.069.004) 1.55 0.05(.061 .002)dia. 1.75 0.1 (.069 .004) (25 to 50 circuits) 1.55 0.05 (.061 .002)dia. Circuits Cover tape leader 2.0 0.5 (.079 .020) (6 to 24 circuits) Feeding direction Carrier tape W W1 Note: 1. Specifications conform to JIS C 0806. The tape width, connector recess dimensions, etc. are determined by the number of circuits and external shape of the connector to be loaded. 2. Specifications are subject to change without prior notice. Q'ty / reel F S 6 to 8 7.5(.295) - 16.0( .630) 17.5( .689) 2,000 9 to 24 11.5(.453) - 24.0( .945) 25.5(1.004) 2,000 25 to 30 14.2(.559) 28.4(1.118) 32.0(1.260) 33.5(1.319) 2,000 32 to 50 20.2(.795) 40.4(1.591) 44.0(1.732) 45.5(1.791) 2,000 Lead section dimensions of FFC and FPC ------------------------------------- [0.5(.020)x(Number of circuits +1)] 0.05(.002) 0.35 0.04 (.014 .002) 0.5 0.1 (.020 .004) 0.30.03 (.012 .001) [5.5(.217)] 0.5 0.03 (.020 .001) [0.5(.020)x(Number of circuits -1)] 0.03(.001) 3.0(.118)min. 0.5 0.1 (.020 .004) Conductor Cover layer Reinforcing layer Base layer 495 FLZ CONNECTOR PC board layout (viewed from component side) and Assembly layout ------------------ 3.3 0.1 (.130 .004) 0.35 0.05 (.014.002) 1.20.1 (.047.004) 4.6(.181) [0.7(.028)] 2.0(.079) 0.5 0.03 (.020 .001) 2.5 (.098)min. (6 to 33 circuits) 2.1 0.1 (.083 .004) 0.35 0.1(.014 .004) FPC (13 to 50 circuits) <Inner-lock type> 0.6(.024) 1.65 (.065) 1.55(.061) Note: 1. Tolerances are non-cumulative: 0.03mm(.001" ) for all centers. 2. The dimensions above should serve as a guideline. Contact JST for details. 496 5.1(.201) FPC 0.7(.028) 2.0(.079) [2.95 (.116)] 1.5 0.4 (.059) (.016) 3.75(.148) 0.50.03(.020.001) 2.85 0.30.05(.012.002) 2.05(.081) (.112)