7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 2007 RELEASED FOR PUBLICATION 6 5 4 3 2 2007 LOC GP ALL RIGHTS RESERVED. BY - 1 D 3 MAX TYP DETAIL S SCALE 20:1 12 MATERIALS: CAGE ASSEMBLY: NICKEL SILVER, 0.25 THICK EMI SPRINGS: COPPER ALLOY FRONT FLANGE: ZINC ALLOY HEAT SINK: ALUMINUM HEAT SINK CLIP: STAINLESS STEEL 2 PITCH BETWEEN PORTS OF ONE 1X3 CAGE ASSEMBLY. 3 SPACING BETWEEN CAGES ON THE SAME PC BOARD, TO BE SPECIFIED BY CUSTOMER, MUST COMPLY WITH MINIMUM DIMENSIONS SHOWN. 4 REFERENCE APPLICATION SPEC 114-13218 FOR RECOMMENDED DRILL HOLE DIAMETER AND PLATING THICKNESS. 5 DATUMS AND BASIC DIMENSIONS ESTABLISHED BY CUSTOMER. 6 DIMENSION C IS THE NOMINAL THICKNESS OF CUSTOMER SUPPLIED PC BOARD. MINIMUM SINGLE SIDED PC BOARD THICKNESS: 1.45mm MINIMUM DOUBLE SIDED PC BOARD THICKNESS: 2.2mm PER QSFP 7 HEAT SINKS AND CLIPS SHIPPED ASSEMBLED TO CAGE ASSEMBLY. CAGE ASSEMBLY MAY BE PRESSED INTO THE PCB AS SHIPPED. 8 DATUM 9 DIMENSION APPLIES WITH MODULE INSERTED IN CAGE. 10 -A- 9 REVISIONS DIST 00 P LTR DESCRIPTION DATE DWN APVD C REVISED PER ECO-10-018054 02NOV2010 CJV EJB D REVISED PER ECO-12-005533 23MAR2012 JY AC E REVISED PER ECO-14-012115 6AUG2014 RG MC F REVISED PER ECO-14-017735 3DEC2014 RG MC 13 BASELINE FOR THESE DIMENSIONS IS THE CENTER OF COMPLIANT PIN HOLE. 14 2D BARCODE AND DATE CODE (YYWWD) MARKED ON SIDE OF CAGE. 15 REFERENCE APP SPEC 114-13218 FOR GASKET THICKNESS CALCULATION. 16 FINISH: EMI SPRINGS: 2m MINIMUM TIN FRONT FLANGE: 3m MINIMUM TIN OVER 1.27m MINIMUM NICKEL OVER 5.08m MINIMUM COPPER HEAT SINK: ANODIZED BLACK. D IS TOP SURFACE OF PC BOARD. UNPLATED THRU HOLE. 11. MATES WITH QSFP MSA COMPATIBLE TRANSCEIVER. 12 SURFACE TRACES PERMITTED WITHIN THIS AREA EXCEPT WHERE CAGE STANDOFFS, SHOWN IN DETAIL S, CONTACT PC BOARD. ( 60 ) ( 53.95 ) C 1 C B MAX 2D BARCODE AND DATE CODE 2.2 MAX SEE DETAIL 14 2X ( 19 ) S 2 B B CAGE ASSEMBLY DESIGN APPROVED TO FIRST PIECE APPROVAL CONTACT PRODUCT ENGINEERING BEFORE USING THIS PRINT SAN THIS DRAWING IS A CONTROLLED DOCUMENT. DIMENSIONS: mm FRONT FLANGE - 1 TOLERANCES UNLESS OTHERWISE SPECIFIED: 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH 0.1 0.1 - -16 DWN 07NOV2007 CHK 07NOV2007 APVD 07NOV2007 C. VALENTINE E. BRIGHT E. BRIGHT PRODUCT SPEC 108-2286 APPLICATION SPEC - 114-13218 WEIGHT - CUSTOMER DRAWING 2007456-4 NETWORKING 2007456-3 PCI 2007456-1 2007456-2 HEAT SINK PROFILE B MATERIAL 4805 (3/11) 16.0 13.7 THIS PRINT IS PRELIMINARY CUSTOMERIZED 23.0 EMI SPRINGS A 16.8 PART NUMBER A TE Connectivity NAME 1X3 CAGE ASSEMBLY, BEHIND BEZEL, W/ HEAT SINKS, QSFP - SIZE CAGE CODE A1 00779 DRAWING NO 2007456 SCALE 4:1 SHEET 1 RESTRICTED TO OF - 5 REV F 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 2007 RELEASED FOR PUBLICATION 6 5 4 3 2 2007 LOC GP ALL RIGHTS RESERVED. BY - 1 REVISIONS DIST 00 P LTR - DESCRIPTION DATE SEE SHEET 1 DWN APVD - - - D D 7 HEAT SINK CLIP QUANTITY: 3 C C 72 PIN HEAT SINK QUANTITY: 3 7 1X3 BEHIND BEZEL QSFP CAGE ASSEMBLY QUANTITY: 1 B B A A DESIGN APPROVED THIS PRINT IS THIS DRAWING IS A CONTROLLED DOCUMENT. PRELIMINARY TO FIRST PIECE APPROVAL CONTACT PRODUCT ENGINEERING BEFORE USING THIS PRINT 4805 (3/11) DIMENSIONS: mm MATERIAL - TOLERANCES UNLESS OTHERWISE SPECIFIED: 0.1 0.1 - 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - DWN 07NOV2007 CHK 07NOV2007 APVD 07NOV2007 C. VALENTINE E. BRIGHT E. BRIGHT PRODUCT SPEC 108-2286 APPLICATION SPEC - 114-13218 WEIGHT - CUSTOMER DRAWING TE Connectivity NAME 1X3 CAGE ASSEMBLY, BEHIND BEZEL, W/ HEAT SINKS, QSFP - SIZE CAGE CODE A1 00779 DRAWING NO 2007456 SCALE 4:1 SHEET 2 RESTRICTED TO OF - 5 REV F 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 2007 RELEASED FOR PUBLICATION BY - 6 5 4 3 2 2007 LOC GP ALL RIGHTS RESERVED. 1 REVISIONS DIST 00 P LTR - 3 60.5 D 0.1 MIN DESCRIPTION DATE SEE SHEET 1 DWN APVD - - - D 48 .25 MAX R 0.3 MAX TYP 5.2 MAX 9.7 TYP 0.2 0.3 0.2 (0.4 # 0.1 FOR PCI APPLICATIONS) 57.5 0.1 TYP GUIDE POSTS PER SPEC 37 MAX BEZEL GAP FOR EMI GASKET PROVIDED BY CUSTOMER 15 C C ONE SIDED CONFIGURATION SCALE 2:1 B 0.3 B 0.2 (C+0.4) # 0.1 C 6 (THICKNESS OF PC BOARD) BELLY TO BELLY CONFIGURATION SIMILAR TO ONE SIDED EXCEPT WHERE NOTED SCALE 2:1 A A DESIGN APPROVED THIS PRINT IS THIS DRAWING IS A CONTROLLED DOCUMENT. PRELIMINARY TO FIRST PIECE APPROVAL CONTACT PRODUCT ENGINEERING BEFORE USING THIS PRINT 4805 (3/11) DIMENSIONS: mm MATERIAL - TOLERANCES UNLESS OTHERWISE SPECIFIED: 0.1 0.1 - 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - DWN 07NOV2007 CHK 07NOV2007 APVD 07NOV2007 C. VALENTINE E. BRIGHT E. BRIGHT PRODUCT SPEC 108-2286 APPLICATION SPEC - 114-13218 WEIGHT - CUSTOMER DRAWING TE Connectivity NAME 1X3 CAGE ASSEMBLY, BEHIND BEZEL, W/ HEAT SINKS, QSFP - SIZE CAGE CODE A1 00779 DRAWING NO 2007456 SCALE 4:1 SHEET 3 RESTRICTED TO OF - 5 REV F 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 2007 RELEASED FOR PUBLICATION 6 5 4 3 2 2007 LOC GP ALL RIGHTS RESERVED. BY - 1 REVISIONS DIST 00 P LTR - DESCRIPTION DATE SEE SHEET 1 DWN APVD - - - 12 M SEE DETAIL 57.2 MAX 13 D (1.05) 4 18.5 19 17.38 DETAIL SCALE J SEE DETAIL -U- M 10:1 D AREA DENOTES COMPONENT KEEP-OUT (TRACES PERMITTED) 0.1 MAX 6X 10 n 1.55 0.05 38X 0.4 TYP 2X 10.3 MAX 4.5 11.3 MIN 0.03 38X 0.8 TYP 1.8 0.03 1 C 3X 0.35 C 2.5 40.68 2X 0.8 MIN 2X 8 37.7 5.18 6X 30.1 3.05 MAX 1.69 3X B MAX 0.89 9 3X MIN 15.02 5 BSC -X- 1 MIN 3X 4 3X 5 -Y- 3.4 MIN 1.1 BSC (1.05) -T- 3X 21X (1.05) 4 17.9 THIS PRINT IS PRELIMINARY TO FIRST PIECE APPROVAL CONTACT PRODUCT ENGINEERING BEFORE USING THIS PRINT 4805 (3/11) 3 TO q OF FIRST ROW OF HOLES FOR NEXT ADJACENT CAGE CROSS-HATCHED AREA DENOTES COMPONENT AND TRACE KEEP-OUT (EXCEPT CHASSIS GROUND) 19 5 A DESIGN APPROVED B DETAIL J 3 PLACES SCALE 8:1 9 4.5 5 MAX 59 MIN A THIS DRAWING IS A CONTROLLED DOCUMENT. DIMENSIONS: RECOMMENDED PC BOARD LAYOUT SINGLE SIDE MOUNT CONFIGURATION SCALE 5:1 mm MATERIAL - TOLERANCES UNLESS OTHERWISE SPECIFIED: 0.1 0.1 - 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - DWN 07NOV2007 CHK 07NOV2007 APVD 07NOV2007 C. VALENTINE E. BRIGHT E. BRIGHT PRODUCT SPEC 108-2286 APPLICATION SPEC - 114-13218 WEIGHT - CUSTOMER DRAWING TE Connectivity NAME 1X3 CAGE ASSEMBLY, BEHIND BEZEL, W/ HEAT SINKS, QSFP - SIZE CAGE CODE A1 00779 DRAWING NO 2007456 SCALE 4:1 SHEET 4 RESTRICTED TO OF - 5 REV F 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 2007 RELEASED FOR PUBLICATION 6 5 4 3 2 2007 LOC GP ALL RIGHTS RESERVED. BY - 1 REVISIONS DIST 00 P LTR DESCRIPTION SEE SHEET 1 - 15.25 2.13 4 6X APVD - - - D 15.75 15.25 SEE DETAIL K (1.05) -U- 10 DWN 3.25 3.25 D DATE n 1.55 0.4 TYP 0.05 38X 0.35 0.03 0.8 TYP 38X 1 1.8 0.03 2.5 4.5 C C 5.18 6X 40.68 37.7 DETAIL K 3 PLACES SCALE 8:1 6X 30.1 B B 7X 8 BSC 5 5 4.5 -X- 3X 4 (1.05) 3X 5 3X 5 PRELIMINARY TO FIRST PIECE APPROVAL CONTACT PRODUCT ENGINEERING BEFORE USING THIS PRINT 4805 (3/11) (1.05) 17.9 4 3 TO q OF FIRST ROW OF HOLES FOR NEXT ADJACENT CAGE BSC A THIS PRINT IS 3.4 MIN 44X -T- DESIGN APPROVED 1.1 -Y- 19 A RECOMMENDED PC BOARD LAYOUT BELLY TO BELLY CONFIGURATION SEE SHEET 4 FOR COMPONENT AND TRACE KEEP-OUTS SCALE 5:1 THIS DRAWING IS A CONTROLLED DOCUMENT. DIMENSIONS: mm MATERIAL - TOLERANCES UNLESS OTHERWISE SPECIFIED: 0.1 0.1 - 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - DWN 07NOV2007 CHK 07NOV2007 APVD 07NOV2007 C. VALENTINE E. BRIGHT E. BRIGHT PRODUCT SPEC 108-2286 APPLICATION SPEC - 114-13218 WEIGHT - CUSTOMER DRAWING TE Connectivity NAME 1X3 CAGE ASSEMBLY, BEHIND BEZEL, W/ HEAT SINKS, QSFP - SIZE CAGE CODE A1 00779 DRAWING NO 2007456 SCALE 4:1 SHEET 5 RESTRICTED TO OF - 5 REV F Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TE Connectivity: 2007456-2