PXI/DAQ/DAQe-2000 Series 4-CH 14/16-Bit Up to 2 MS/s Simultaneous-Sampling Multi-Function DAQ Cards Introduction ADLINK's PXI/DAQ/DAQe-2000 series of products are simultaneous-sampling multi-function DAQ cards to meet a wide range of application requirements. The devices can simultaneously sample 4 AI channels with differential input configurations in order to achieve maximum noise elimination. They also provide 2-CH 12-bit analog outputs with waveform generation capability, which can be performed together with analog input functions. If more analog input or output channels are required, multiple cards can be synchronized through the SSI (System Synchronization Interface) bus. This makes the PXI/DAQ/DAQe-2000 series ideal for stimulus/response testing. DAQ-2010 DAQe-2010 The PXI/DAQ/DAQe-2000 series also features analog and digital triggering, 24-CH programmable digital I/O lines, and 2-CH 16-bit general-purpose timer/counter. The auto-calibration functions adjust the gain and offset to within specified accuracies such that you do not have to adjust trimpots to calibrate the cards. PXI-2010 Features Supports a 32-bit 3.3 V or 5 V PCI bus (DAQ-2000 series) x1 lane PCI Express(R) Interface (DAQe-2000 series) PXI specification Rev. 2.2 compliant (PXI-2000 series) 4-CH differential analog inputs Bipolar or unipolar analog input ranges Programmable gains of x1, x2, x4, x8 Scatter-gather DMA for both analog inputs and outputs 2-CH 12-bit multiplying analog outputs with waveform generation 24-CH TTL digital input/output 2-CH 16-bit general-purpose timer/counter Analog and digital triggering Fully auto calibration Multiple cards synchronization through SSI (System Synchronization Interface) bus or PXI trigger bus Terminal Boards & Cables DIN-68S-01 Terminal Board with One 68-pin SCSI-II Connector and DIN-Rail Mounting (Cables are not included.) ACL-10568-1 68-pin SCSI-VHDCI cable (mating with AMP-787082-7), 1 M * For more information on mating cables, please refer to P2-61/62. Operating Systems * Windows 7/Vista/XP/2000/2003 Server * Linux Recommended Software * AD-Logger * VB.NET/VC.NET/VB/VC++/BCB/Delphi * DAQBench Driver Support * DAQPilot for LabVIEWTM * DAQ-MTLB for MATLAB(R) Terminal board DIN-68S-01 & 68-Pin SCSI-VHDCI cable ACL-10568-1 SSI Bus Cables (for multiple cards synchronization) ACL-SSI-2/3/4 SSI Bus cable for two, three, and four devices * D2K-DASK for Windows * D2K-DASK/X for Linux SSI bus cable for multiple card synchronization (for DAQ/DAQe-2000 series) Pin Assignment Connector Pin Assignment CH0+ 1 35 CH0- CH1+ 2 36 CH1- CH2+ 3 37 CH2- CH3+ 4 38 CH3- EXTATRIG 5 39 AIGND DA1OUT 6 40 AOGND DA0OUT 7 41 AOGND AOEXTREF 8 42 AOGND SDI3_1 / NC* 9 43 SDI3_0 / NC* SDI2_1 / NC* 10 44 SDI2_0 / NC* SDI1_1 / NC* 11 45 SDI1_0 / NC* SDI0_1 / NC* 12 46 SDI0_0 / NC* AO_TRIG_OUT 13 47 EXTWFTRG AI_TRIG_OUT 14 48 EXTDTRIG GPTC1_SRC 15 49 DGND GPTC0_SRC 16 50 DGND GPTC0_GATE 17 51 GPTC1_GATE GPTC0_OUT 18 52 GPTC1_OUT GPTC0_UPDOWN 19 53 GPTC1_UPDOWN EXTTIMEBASE 20 54 DGND AFI1 21 55 AFI0 PB7 22 56 PB6 PB5 23 57 PB4 PB3 24 58 PB2 PB1 25 59 PB0 PC7 26 60 PC6 PC5 27 61 PC4 DGND 28 62 DGND PC3 29 63 PC2 PC1 30 64 PC0 PA7 31 65 PA6 PA5 32 66 PA4 PA3 33 67 PA2 PA1 34 68 PA0 *Pin 9-12 and pin 43-46 are SDI<0..3>_n for 2010; NC for 2005, and 2006 2-13 www.adlinktech.com High-Performance DAQ 1 Software & Utilities Ordering Information / Quick Selection Guide Model Name 2 Analog Input No. of channels Resolution Analog Output DIO Timer/Counter Sampling rate Input range No. of channels Resolution Update rate No. of channels No. of channels PXI/DAQ/DAQe-2010 4-CH DI 14 bits 2 MS/s 1.25 V to 10 V 2 12 bits 1 MS/s 24-CH 8255 PIO 2-CH, 16-bit PXI/DAQ/DAQe-2005 4-CH DI 16 bits 500 kS/s 1.25 V to 10 V 2 12 bits 1 MS/s 24-CH 8255 PIO 2-CH, 16-bit PXI/DAQ/DAQe-2006 4-CH DI 16 bits 250 kS/s 1.25 V to 10 V 2 12 bits 1 MS/s 24-CH 8255 PIO 2-CH, 16-bit PXI/DAQ/DAQe-2010 PXI/DAQ/DAQe-2005 PXI/DAQ/DAQe-2006 16 bits, no missing codes 16 bits, no missing codes Analog Input 14 bits Resolution Number of channels 4 simultaneous-sampling channels with differential input 2 MS/s Maximum sampling rate 500 kS/s Programmable gain Bipolar input ranges 10 V, 5 V, 2.5 V, 1.25 V Unipolar input ranges 0-10 V, 0-5 V, 0-2.5 V, 0-1.25 V 250 kS/s 1, 2, 4, 8 3 mV 2 mV 1 mV Gain error 0.1% of FSR 0.04% of FSR 0.03% of FSR 1 MHz -3 dB small signal bandwidth (gain = 1) Data transfers Analog Output 1 MHz 600 kHz Pre-trigger, post-trigger, middle-trigger, delay-trigger, and repeated trigger Trigger modes 8 k samples 512 samples 512 samples Polling, scatter-gather DMA Number of channels 2 voltage outputs Resolution 12 bits Output ranges 0-10 V, 10 V, 0-AOEXTREF, AOEXTREF Offset error 3mV 1mV 1mV Gain error 0.05% of max. output 0.04% of max. output 0.04% of max. output Driving capacity Stabililty Any passive load, up to 1500 pF Trigger sources Software, external digital/analog trigger, SSI bus Trigger modes Post-trigger, delay-trigger, and repeated trigger FIFO buffer size Data transfers Programmed I/O, scatter-gather DMA Number of channels Compatibility Data transfers Timer/Counter Auto Calibration Onboard reference General Specifications Communications 11 2 Vision +5 V 2 ppm/C 6 ppm/1000 Hrs Dimensions Connector 68-pin VHDCI-type female Storage temperature 0 to 55C -20 to 70C Humidity +5 V 1.82 A typical (PXI/DAQ-2010) +3.3 V 1.246 A, +12 V 0.448 A typical (DAQe-2010) 5 to 95%, non-condensing +5 V 2.04 A typical (PXI/DAQ-2005) +3.3 V 1.03 A, +12 V 0.75 A typical (DAQe-2005) 12 Fanless Embedded Computers 160 mm x 100 mm (not including connectors) (PXI-2000 series) 175 mm x 107 mm (not including connectors) (DAQ-2000 series) 168 mm x 107 mm (not including connectors) (DAQe-2000 series) Operating temperature Power requirements 10 16 bits 5 V/TTL 40 MHz , external clock up to 10 MHz Temperature drift Stabililty 9 Remote I/O 8255 24-bit programmable input/output 5 V/TTL Programmed I/O Resolution Base clock available 5 mA 2 k samples Number of channels Compatibility Real-time Distributed I/O 3 s to 0.5 LSB accuracy Settling time Digital I/O 7 PAC 20 V/s Slew rate 6 8 1 s Maximum update rate 5 85 dB Software, external digital/analog trigger, SSI bus Trigger sources Modular Instruments Motion Control 1 G/100 pF Input Impedance FIFO buffer size DC Power on: Continuous 35 V, Power off: Continuous 15 V Overvoltage protection CMRR (gain = 1) PXI/PXIe GPIB & Bus Expansion Offset error Input Coupling 3 4 Specifications Model Name DAQ 13 +5 V 1.82 A typical (DAQ-2006) +3.3 V 1.02 A, +12 V 0.67 A typical (DAQe-2006) cPCI & Industrial Computers www.adlinktech.com 2-14 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: ADLINK Technology: PXI-2006 PXI-2005