HMC276QS24ETR - ANALOG DEVICES

For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order On-line at www.hittite.com

SWITCHES - MATRIX - SMT

12 - 52

General Description

Features

Functional Diagram

The HMC276QS24 & HMC276QS24E are low-cost

4x2 switch matrix in a 24-lead QSOP package for use

in RF multiplexing applications from 700 to 3000 MHz.

A positive voltage controlled 4 bit decoder is inte-

grated on the switch. The switch may be used in either

75 ohm or 50 ohm systems.

Both switch outputs (OP1 & OP2) can independently

select any of the four inputs (HH, HL, VH, VL) or simul-

taneously select the same inputs. Note that the switch

is bi-directional and input/output functionality may be

interchanged. The recommended loading impedance

is 62.5 ohms on each input (HH, HL, VH, VL) and

75 ohms on each output (OP1 & OP2). All data pre-

sented was measured in a 50 ohm (input/output)

system.

Available as Lead Free

4x2 Switch Matrix Using One IC

4x4 Switch Matrix Using Two ICs

Integrated 4 Bit Decoder

Single Positive Supply: Vdd = +5V

Electrical Speci cations, TA = +25° C, Vdd= +5V, 50 Ohm System

Typical Applications

4x2 Switch Matrix for 0.7 - 3.0 GHz Applications:

• Cable Modem

• CATV

• Cellular Systems

• DBS

Parameter Frequency Min. Typ. Max. Units

Insertion Loss 700 - 3000 MHz 6.0 7.0 dB

Isolation

700 - 950 MHz

950 - 1450 MHz

1450 - 2150 MHz

2150 - 3000 MHz

Return Loss (Input; VL, HL, VH, HH) 700 - 3000 MHz 12 16 dB

Return Loss (Output; OP1, OP2) 700 - 3000 MHz 11 15 dB

Output IP3 700 - 3000 MHz 31 37 dBm

Input Power for 1 dB Compression 700 - 3000 MHz 22 26 dBm

Switching Speed

tRISE / tFALL (10/90% RF)

tON / tOFF (50% CTL to 10/90% RF)

700 - 3000 MHz 140

350

See OP1/2 Isolation Tables

GaAs MMIC 4x2 SWITCH

MATRIX, 0.7 - 3.0 GHz

v06.0409

HMC276QS24 / 276QS24E

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order On-line at www.hittite.com

SWITCHES - MATRIX - SMT

12 - 53

Return Loss Typical Insertion Loss vs. Temperature

Insertion Loss on OP1 Insertion Loss on OP2

OP1 Isolation 950 - 1450 MHz OP2 Isolation 950 - 1450 MHz

Input to

Output State

Interfering

Signal State Min.

(dB)

Ty p.

(dB)

HL to OP1 VL to OP1

All Other States

>43

VL to OP1 All Other States All States 40 >43

VH to OP1 All Other States All States 40 >43

HH to OP1

VL to OP1

HL to OP1

All Other States

>43

Input to

Output State

Interfering

Signal State Min.

(dB)

Ty p.

(dB)

HL to OP2 All States All States 40 >43

VH to OP2

HL to OP2

VL to OP2

All Other States

>43

VL to OP2 HL to OP2

All Other States

>43

HH to OP2 All States All States 40 >43

-10

-8

-6

-4

-2

0.5 1 1.5 2 2.5 3 3.5 4

VL to OP1 (state 1)

VL to OP1 (state 2)

VH to OP1 (state 5)

VH to OP1 (state 6)

HL to OP1 (state 11)

HL to OP1 (state 12)

HH to OP1 (state 15)

HH to OP1 (state 16)

INSERTION LOSS (dB)

FREQUENCY (GHz)

-10

-8

-6

-4

-2

0.5 1 1.5 2 2.5 3 3.5 4

VL to OP2 (state 1)

VL to OP2 (state 5)

VH to OP2 (state 2)

VH to OP2 (state 6)

HL to OP2 (state 11)

HL to OP2 (state 15)

HH to OP2 (state 12)

HH to OP2 (state 16)

INSERTION LOSS (dB)

FREQUENCY (GHz)

-25

-20

-15

-10

-5

0.5 1 1.5 2 2.5 3 3.5 4

Input RL, Input Selected

Input RL, Input Deselected

Output RL

RETURN LOSS (dB)

FREQUENCY (GHz)

-10

-8

-6

-4

-2

0.5 1 1.5 2 2.5 3 3.5 4

+25 C

+85 C

-40 C

INSERTION LOSS (dB)

FREQUENCY (GHz)

HMC276QS24 / 276QS24E

v06.0409

GaAs MMIC 4x2 SWITCH

MATRIX, 0.7 - 3.0 GHz

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order On-line at www.hittite.com

SWITCHES - MATRIX - SMT

12 - 54

* Isolation is recorded above insertion loss & measured at output of switch.

Isolation When VL is Connected to OP1* Isolation When HH is Connected to OP1*

Isolation When HL is Connected to OP1* Isolation When VH is Connected to OP1*

Isolation When HL is Connected to OP2* Isolation When VL is Connected to OP2*

-60

-50

-40

-30

-20

-10

0.5 1 1.5 2 2.5 3 3.5 4

VL to OP1 (state 16)

VH to OP1 (state 16)

VL to OP1 (state 13)

VH to OP1 (state 14)

HL to OP1 (state 16)

HL to OP1 (state 15)

ISOLATION (dB)

FREQUENCY (GHz)

-60

-50

-40

-30

-20

-10

0.5 1 1.5 2 2.5 3 3.5 4

HL to OP1 (state 3)

VH to OP1 (state 2)

HH to OP1 (state 1)

HH to OP1 (state 4)

VH to OP1 (state 1)

HL to OP1 (state 1)

ISOLATION (dB)

FREQUENCY (GHz)

-60

-50

-40

-30

-20

-10

0.5 1 1.5 2 2.5 3 3.5 4

VH to OP2 (state 1)

VH to OP2 (state 5)

HH to OP2 (state 1)

HH to OP2 (state 13)

HL to OP2 (state 1)

HL to OP2 (state 9)

ISOLATION (dB)

FREQUENCY (GHz)

-60

-50

-40

-30

-20

-10

0.5 1 1.5 2 2.5 3 3.5 4

HH to OP2 (state 11)

HH to OP2 (state 15)

VH to OP2 (state 7)

VH to OP2 (state 11)

VL to OP2 (state 11)

VL to OP2 (state 3)

ISOLATION (dB)

FREQUENCY (GHz)

-60

-50

-40

-30

-20

-10

0.5 1 1.5 2 2.5 3 3.5 4

HH to OP1 (state 8)

HL to OP1 (state 6)

HL to OP1 (state 7)

VL to OP1 (state 6)

VL to OP1 (state 5)

HH to OP1 (state 6)

ISOLATION (dB)

FREQUENCY (GHz)

-60

-50

-40

-30

-20

-10

0.5 1 1.5 2 2.5 3 3.5 4

HH to OP1 (state 11)

HH to OP1 (state 12)

VH to OP1 (state 10)

VL to OP1 (state 11)

VL to OP1 (state 9)

VH to OP1 (state 11)

ISOLATION (dB)

FREQUENCY (GHz)

HMC276QS24 / 276QS24E

v06.0409

GaAs MMIC 4x2 SWITCH

MATRIX, 0.7 - 3.0 GHz

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order On-line at www.hittite.com

SWITCHES - MATRIX - SMT

12 - 55

Isolation When VH is Connected to OP2* Isolation When HH is Connected to OP2*

Output Third Order Intercept Point

* Isolation is recorded above insertion loss & measured at output of switch.

Path State F1

Pout (dBm)

Pout

Intermod (dBm)

IMR

(dBc)

Output

IP3 (dBm)

VL to OP1 1 -12 -106 94 35

VL to OP2 1 -12 -114 102 39

HL to OP1 11 -12 -108 96 36

HL to OP2 11 -12 -110 98 37

VH to OP1 6 -12 -115 103 39.5

VH to OP2 6 -12 -115 103 39.5

HH to OP1 16 -12 -116 104 40

HH to OP2 16 -12 -114 102 39

Test Conditions

Temperature = +25° C

F1 = 2150 (MHz): -12 dBm at the Output

F2 = 2151 (MHz): -12 dBm at the Output

Vdd = +5V

VCTL Low = 0V, High = +5V

-60

-50

-40

-30

-20

-10

0.5 1 1.5 2 2.5 3 3.5 4

HL to OP2 (state 12)

HL to OP2 (state 16)

VH to OP2 (state 8)

VH to OP2 (state 16)

VL to OP2 (state 16)

VL to OP2 (state 4)

ISOLATION (dB)

FREQUENCY (GHz)

-60

-50

-40

-30

-20

-10

0.5 1 1.5 2 2.5 3 3.5 4

HH to OP2 (state 14)

HL to OP2 (state 6)

VL to OP2 (state 2)

VL to OP2 (state 6)

HH to OP2 (state 6)

HL to OP2 (state 10)

ISOLATION (dB)

FREQUENCY (GHz)

HMC276QS24 / 276QS24E

v06.0409

GaAs MMIC 4x2 SWITCH

MATRIX, 0.7 - 3.0 GHz

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order On-line at www.hittite.com

SWITCHES - MATRIX - SMT

12 - 56

DC Blocking And Decoupling Capacitors

The HMC276QS24(E) requires DC blocks on all 6 RF ports (OP1, OP2, VL, HL, VH, HH). Characterization on the

HMC276QS24(E) was done using 0603 size 330pF capacitors on all RF ports. A 0.01μF DC decoupling capacitor

(0603 size) is recommended for the Vdd pin.

Truth Table

Control Input Output

to Input State RF Path State

State HV 1 Tone 1 HV 2 Tone 2 OP1 OP2 VL to

OP1

HL to

OP1

VH to

OP1

HH to

OP1

VL to

OP2

HL to

OP2

VH to

OP2

HH to

OP2

1 0 0 0 0 VL VL LOSS ISOL ISOL ISOL LOSS ISOL ISOL ISOL

2 0 0 0 1 VL VH LOSS ISOL ISOL ISOL ISOL ISOL LOSS ISOL

3 0 0 1 0 VL HL LOSS ISOL ISOL ISOL ISOL LOSS ISOL ISOL

4 0 0 1 1 VL HH LOSS ISOL ISOL ISOL ISOL ISOL ISOL LOSS

5 0 1 0 0 VH VL ISOL ISOL LOSS ISOL LOSS ISOL ISOL ISOL

6 0 1 0 1 VH VH ISOL ISOL LOSS ISOL ISOL ISOL LOSS ISOL

7 0 1 1 0 VH HL ISOL ISOL LOSS ISOL ISOL LOSS ISOL ISOL

8 0 1 1 1 VH HH ISOL ISOL LOSS ISOL ISOL ISOL ISOL LOSS

9 1 0 0 0 HL VL ISOL LOSS ISOL ISOL LOSS ISOL ISOL ISOL

10 1 0 0 1 HL VH ISOL LOSS ISOL ISOL ISOL ISOL LOSS ISOL

11 1 0 1 0 HL HL ISOL LOSS ISOL ISOL ISOL LOSS ISOL ISOL

12 1 0 1 1 HL HH ISOL LOSS ISOL ISOL ISOL ISOL ISOL LOSS

13 1 1 0 0 HH VL ISOL ISOL ISOL LOSS LOSS ISOL ISOL ISOL

14 1 1 0 1 HH VH ISOL ISOL ISOL LOSS ISOL ISOL LOSS ISOL

15 1 1 1 0 HH HL ISOL ISOL ISOL LOSS ISOL LOSS ISOL ISOL

16 1 1 1 1 HH HH ISOL ISOL ISOL LOSS ISOL ISOL ISOL LOSS

Control Voltages

HV1, Tone1, HV2, Tone2 Bias Voltage

Vdd Range = +5.0 Vdc ± 10 %

Vdd

(Vdc)

Idd (Typ.)

(mA)

Idd (Max.)

(mA)

+5.0 1 1.5

State Bias Condition

Low (0) 0 to 0.8 Vdc @ 5 μA Typical

High (1) +2.0 to +5.0 Vdc @ 25 μA Typical

HMC276QS24 / 276QS24E

v06.0409

GaAs MMIC 4x2 SWITCH

MATRIX, 0.7 - 3.0 GHz

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order On-line at www.hittite.com

SWITCHES - MATRIX - SMT

12 - 57

Absolute Maximum Ratings

Bias Voltage Range (Vdd) +8.0 Vdc

Control Voltage Range

(All Logic Lines) Vdd +0.5 to -0.2V Vdc

Channel Temperature 150 °C

Thermal Resistance 325 °C/W

Storage Temperature -65 to +150 °C

Operating Temperature -40 to +85 °C

Maximum Input Power +23 dBm (700 - 2150 MHz)

Outline Drawing

NOTES:

1. LEADFRAME MATERIAL: COPPER ALLOY

2. DIMENSIONS ARE IN INCHES [MILLIMETERS].

3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.

4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.

5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.

Part Number Package Body Material Leadframe Plating MSL Rating Package Marking [3]

HMC276QS24 Low Stress Injection Molded Plastic Silica

and Silicon Impregnated Sn/Pb Solder MSL1 [1] HMC276

XXXX

HMC276QS24E RoHS-compliant Low Stress Injection Molded

Plastic Silica and Silicon Impregnated 100% Matte Tin MSL1 [2] HMC276

XXXX

[1] Max peak re ow temperature of 235 °C

[2] Max peak re ow temperature of 260 °C

[3] 4-Digit lot number XXXX

Package Information

HMC276QS24 / 276QS24E

v06.0409

GaAs MMIC 4x2 SWITCH

MATRIX, 0.7 - 3.0 GHz

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order On-line at www.hittite.com

SWITCHES - MATRIX - SMT

12 - 58

The HMC276QS24E switch can operate as a 4x4 switch by

connecting the 4 inputs of two switches directly together.

The VL, VH, HL, and HH inputs of the  rst switch should be

connected to the second switch, as illustrated.

Mirror image switch performance can be realized by

inverting the HV1 & HV2 logic control signals of one of the

HMC276QS24E switches.

The input loading impedance of two switches in parallel should

be 31.25 ohms. The output loading impedance on each output

should be 75 ohms. The interconnect RF line between the

switch’s inputs should be an RF trace with a characteristic

impedance of 62.5 ohms. This will allow the switch to remain

matched in all possible switch states.

The HMC276QS24E does not provide output to output

(OP1 to OP2) isolation. For this reason, It is recommended

that external ampli ers should be used at each output. The ampli er’s reverse isolation will provide output to output

isolation, if this is necessary.

Each HMC276QS24E requires DC blocking capacitors on ALL RF input and output ports.

Switch Application Circuit for 4x4 Switch Matrix

HMC276QS24 / 276QS24E

v06.0409

GaAs MMIC 4x2 SWITCH

MATRIX, 0.7 - 3.0 GHz

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order On-line at www.hittite.com

SWITCHES - MATRIX - SMT

12 - 59

Evaluation PCB

The circuit board used in the  nal application should be generated with proper RF circuit design techniques.

Signal lines at the RF port should have 50 ohm impedance and the package ground leads should be connected

directly to the ground plane similar to that shown above. A generous number of ground vias should be used

to interconnect top/bottom ground planes. The evaluation circuit board shown above is available from Hittite

Microwave Corporation upon request.

Multi Pin DC Interface (J1)

Item Description

J2 - J7 PC Mount SMA RF Connector

J1 DC Pin

C1 - C6 100 pF Capacitor, 0402 Pkg.

U1 HMC276QS24 / HMC276QS24E

4x2 Switch Matrix

PCB [2] 102945 Eval Board

[1] Reference this number when ordering complete evaluation PCB

[2] Circuit Board Material: Rogers 4350

Pin Line

1Vdd

2HV1

3GND

4HV2

5GND

6Tone1

7N/C

8N/C

9Tone2

List of Materials for Evaluation PCB 102924 [1]

HMC276QS24 / 276QS24E

v06.0409

GaAs MMIC 4x2 SWITCH

MATRIX, 0.7 - 3.0 GHz

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D