Specification Tyco Electronics Control Drawing Raychem a) Part as supplied. 22251 ***S Screened Moulded Parts iN b) Part after unrestricted recovery. HW R H DIA Heat Recoverable Screen SCRAP SECTION A-A i ilLimet DIMENSIONS fin inches, For reference) H J P R 5 T U V JO X HW JW Part No. Min Max Min Max Ref +10% Ref Ref Min 420% Ref Ref +5% +30% +30% a b a b b b a b b b a b b aT aT 2325121 20 10.4 11 5.0 30 25 1g 3.0 5.0 10 1.0 15 45 1.5 1.0 {0.79} {0.41} {0.43} {0.20} {1.18} (0.98) {0.75} {0.12} {0.20} {0.39} {0.04} {0.59} {1.77} {0.06} {0.04} 2225132 24 14.2 15 6.0 38 28 20 3.0 5.0 10 1.0 17 54 1.5 1.0 {0.94} {0.56) {0.59} {0.24} {1.50} {1.10} {0.79} {0.12} {0.20} {0.39} {0.04} {0.67} {2.13} {0.06} {0.04} 29235142 31 18.0 18 7.2 42 31 21 3.0 6.0 10 1.0 18 63 2.0 1.0 (1.22) {0.71} {0.71} {0.28} (1.65) (1.22) {0.83} {0.12} {0.24} (0.39) {0.04} {0.71} {2.48} {0.08} {0.04} 2225152 36 22.4 22 8.5 51 38 26 3.0 7.0 12 1.0 20 70 2.0 1.0 (1.42) {0.88} {0.87) {0.33} (2.01) (1.50) {1.02} {0.12} {0.28} {0.47} {0.04} {0.79} {2.76} {0.08} {0.04} 2225163 43 28.2 26 10.0 67 45 30 3.0 12 20 1.7 28 90 2.2 1.5 (1.69) {1.11} {1.02} {0.39} (2.64) (1.77) {1.18} {0.12} {0.47} (0.79) {0.07} {1.10} {3.54} {0.09} {0.06} 2325174 47 35.1 36 15.8 80 54 36 3.0 12 20 1.7 3] 112 3.0 1S 1.85) (1.38) {1.42) (0.62) (3.15) (2.13) (1.42) {0.12) {0.47} (0.79) {0.07} {1.22} {4.41} {0.12} {0.06} Copyright C!) The copyright in this drawing is the property of Tyco Electronics UK Ltd. The drawing is issued on the condition that it is not copied, reproduced or disclosed to a third party, either in whole or in part without the prior written consent of Tyco Electronics UK Ltd. Drawn A.LILLEY. Checked Issue 6 Date November 2007 Conforms to ISO Recommendations 3rd Angle Projection Approval Not to Scale mo Design MKTG. Tech. Page 1 of 2 22251 XxX Part Number Specification Raychem 222S1**-*S Issue 6 Control Drawing Iss. Date Eee. Details of Change oO. 6 |November 2007 | CRO6B-HM-012 Imperial dimensions added (Ordering Information) 2225 1*K-*S/ KX Adhesive Slash Number Cif required see compatibility chart) Material Dash Number (see compatibility chart) Base Part Number (COMPATIBILITY CHART) Material Dash Number| Material Description SPEC Number Coating Slash Number -255 ELASTOMER/COPPER COMPOSITE RW-2077 786 NOTES @ As supplied dimensions are for uncoated parts, when coating is added entry diameters will reduce by 1.5mm Max. @) For method of measuring recovered diameter. see appropriate RW specification (SPEC Number), section 2.2, Tyco Electronics UK Ltd. Tyco Electronics Corporation Faraday Road, 300, Constitution Drive, Swindon, Wiltshire, SN3 SHH Menlo Park, CA 94025 England USA Telephone: (01793) 528171 Fax: 572516 Telephone (650) 361-3860 Fax: (650) 361-5579 Cage Code K1010 Cage Code 060390 Page 2 of 2