© Semiconductor Components Industries, LLC, 2001
April, 2019 − Rev. 2
1Publication Order Number:
GBU6M/D
GBU6A - GBU6M
Bridge Rectifiers
Features
•Glass−Passivated Junction
•Surge Overload Rating: 175 A Peak
•Reliable Low−Cost Construction Utilizing Molded Plastic Technique
•Ideal for Printed Circuit Board
•UL Certified: UL #E258596
PACKAGE MARKING AND ORDERING INFORMATION
Part Number Marking Package
Packing
Method
GBU6A GBU6A GBU 4L Rail
GBU6B GBU6B
GBU6D GBU6D
GBU6G GBU6G
GBU6J GBU6J
GBU6K GBU6K
GBU6M GBU6M
SIP4
CASE 127EL
www.onsemi.com
MARKING DIAGRAM
RU = UL Marking
$Y = ON Semiconductor Logo
&Z = Assembly Plant Code
&3 = Numeric Date Code
GBU6A = Specific Device Code
~~ +−
RU$Y&Z&3
GBU 6A
GBU6A − GBU6M
www.onsemi.com
2
ABSOLUTE MAXIMUM RATINGS (TA = 25°C unless otherwise noted) (Note 1)
Symbol Parameter
Value
Units
6A 6B 6D 6G 6J 6K 6M
VRRM Maximum Repetitive Reverse Voltage 50 100 200 400 600 800 1000 V
VRMS Maximum RMS Bridge Input Voltage 35 70 140 280 420 560 700 V
VRDC Reverse Voltage (Rated VR) 50 100 200 400 600 800 1000 V
IF(AV) Average Rectified Forward
Current
TA = 100°C 6.0 A
IFSM Non−Repetitive Peak Forward Surge Current
8.3 ms Single Half−Sine−Wave
175 A
TSTG Storage Temperature Range −55 to +150 °C
TJOperating Junction Temperature −55 to +150 °C
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
THERMAL CHARECTERISTICS (TA = 25°C unless otherwise noted)
Symbol Parameter Value Units
PDPower Dissipation 12 W
RqJA Thermal Resistance per Leg, Junction to Ambient (Note 2) 18.6 °C/W
RqJL Thermal Resistance per Leg, Junction to Lead (Note 3) 3.1 °C/W
2. Device mounted on PCB with 0.5 × 0.5 inch (12 × 12 mm)
3. Device mounted on Al plate with 2.6 × 1.4 × 0.06 inch (6.5 × 3.5 × 0.15 cm)
ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise noted)
Symbol Parameter Value Units
VFForward Voltage, per Element 6.0 A 1.0 V
IRReverse Current, per Element at Rated VRTA = 25°C 5.0 mA
TA = 125°C 500 mA
I2t I2t Rating for Fusing t < 8.35 ms 127 A2s
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
GBU6A − GBU6M
www.onsemi.com
3
TYPICAL PERFORMANCE CHARACTERISTICS
100
Ambient Temperature (5C)
IF
, Average Rectified Forward
Current (A)
0
150
Figure 1. Forward Current Derating Curve Figure 2. Forward Voltage Characteristics
Figure 3. Reverse Current vs. Reverse Voltage Figure 4. Non−Repetitive Surge Current
Figure 5. Total Capacitance
050
1
2
3
4
5
VF
, Forward Voltage (V)
IF
, Forward Current (A)
IR, Reverse Current (mA)
Percent of Rated Peak Reverse Voltage (%) Number of Cycles at 60 Hz
IFSM, Peak Forward Surge
Current (A)
VR, Reverse Voltage (V)
CT
, Total Capacitance (pF)
1
100
0.1
10
0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4
0.1
10
0.01
1
0 20 40 60 80 100 120 140
175
110
140
105
70
35
0
2 5 20 50 100
50
400
10
100
1105 50 100
HEAT−SINK
MOUNTING, TC
4x4x0.15”
COPPER PLATE
MOUNTED ON PC BOARD,
TA 0.5” (12.7 mm) LEAD LENGTH
60 Hz RESISTIVE OR INDUCTIVE LOAD
TA = 25°C
Pulse Width = 300 ms
1% Duty Cycle
TC = 100°C
TC = 25°C
TJ = 105°C
TA = 25°C
f = 1.0 MHz
Visg = 50m Vp−p
SIP4 22.05x18.55
CASE 127EL
ISSUE O
DATE 31 DEC 2016
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
98AON13717G
DOCUMENT NUMBER:
DESCRIPTION:
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
PAGE 1 OF 1
SIP4 22.05x18.55
© Semiconductor Components Industries, LLC, 2019 www.onsemi.com
www.onsemi.com
1
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
TECHNICAL SUPPORT
North American Technical Support:
Voice Mail: 1 800−282−9855 Toll Free USA/Canada
Phone: 011 421 33 790 2910
LITERATURE FULFILLMENT:
Email Requests to: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Europe, Middle East and Africa Technical Support:
Phone: 00421 33 790 2910
For additional information, please contact your local Sales Representative
◊
