Product Folder Sample & Buy Support & Community Tools & Software Technical Documents LM7121 SNOS750A - AUGUST 1999 - REVISED OCTOBER 2014 LM7121 235-MHz Tiny Low Power Voltage Feedback Amplifier 1 Features 3 Description * * * * The LM7121 is a high performance operational amplifier which addresses the increasing AC performance needs of video and imaging applications, and the size and power constraints of portable applications. 1 * * * * * * (Typical Unless Otherwise Noted). VS = 15 V Easy to use Voltage Feedback Topology Stable with Unlimited Capacitive Loads Tiny SOT23-5 Package -- Typical Circuit Layout Takes Half the Space Of SO-8 Designs Unity Gain Frequency: 175 MHz Bandwidth (-3 dB, AV = +1, RL = 100): 235 MHz Slew Rate: 1300V/s Supply Voltages: - SO-8: 5 V to 15 V - SOT23-5: 5 V to 5 V Characterized for: +5 V, 5 V, 15 V Low Supply Current: 5.3 mA 2 Applications * * * * * * Scanners, Color Fax, Digital Copiers PC Video Cards Cable Drivers Digital Cameras ADC/DAC Buffers Set-top Boxes The LM7121 can operate over a wide dynamic range of supply voltages, from 5 V (single supply) up to 15V (see Application and Implementation for more details). It offers an excellent speed-power product delivering 1300 V/s and 235 MHz Bandwidth (-3 dB, AV = +1). Another key feature of this operational amplifier is stability while driving unlimited capacitive loads. Due to its tiny SOT23-5 package, the LM7121 is ideal for designs where space and weight are the critical parameters. The benefits of the tiny package are evident in small portable electronic devices, such as cameras, and PC video cards. Tiny amplifiers are so small that they can be placed anywhere on a board close to the signal source or near the input to an A/D converter. Device Information(1) PART NUMBER LM7121 PACKAGE BODY SIZE (NOM) SOT-23 (5) 2.921 mm x 1.651 mm SOIC (8) 4.902 mm x 3.912 mm (1) For all available packages, see the orderable addendum at the end of the datasheet. Typical Circuit for AV = +1 Operation (VS= 6 V) Unity Gain Frequency vs. Supply Voltage 1 An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications, intellectual property matters and other important disclaimers. PRODUCTION DATA. LM7121 SNOS750A - AUGUST 1999 - REVISED OCTOBER 2014 www.ti.com Table of Contents 1 2 3 4 5 6 Features .................................................................. Applications ........................................................... Description ............................................................. Revision History..................................................... Pin Configuration and Functions ......................... Specifications......................................................... 1 1 1 2 3 4 6.1 6.2 6.3 6.4 6.5 6.6 6.7 4 4 4 4 5 6 6 Absolute Maximum Ratings ...................................... Handling Ratings....................................................... Recommended Operating Conditions....................... Thermal Information .................................................. 15V DC Electrical Characteristics ........................... 15V AC Electrical Characteristics ........................... 5V DC Electrical Characteristics ............................. 6.8 6.9 6.10 6.11 7 5V AC Electrical Characteristics ............................. +5V DC Electrical Characteristics ............................. +5V AC Electrical Characteristics ........................... Typical Characteristics ............................................ 7 8 8 9 Application and Implementation ........................ 21 7.1 Application Information............................................ 21 7.2 Typical Applications ................................................ 22 8 Device and Documentation Support.................. 26 8.1 Trademarks ............................................................. 26 8.2 Electrostatic Discharge Caution .............................. 26 8.3 Glossary .................................................................. 26 9 Mechanical, Packaging, and Orderable Information ........................................................... 26 4 Revision History NOTE: Page numbers for previous revisions may differ from page numbers in the current version. Changes from Original (August 1999) to Revision A Page * Added, updated, or renamed the following sections: Device Information Table, Pin Configuration and Functions, Application and Implementation; Power Supply Recommendations ; Layout; Device and Documentation Support; Mechanical, Packaging, and Ordering Information................................................................................................................. 1 * Deleted TJ = 25C from Electrical Characteristics tables ....................................................................................................... 5 2 Submit Documentation Feedback Copyright (c) 1999-2014, Texas Instruments Incorporated Product Folder Links: LM7121 LM7121 www.ti.com SNOS750A - AUGUST 1999 - REVISED OCTOBER 2014 5 Pin Configuration and Functions Package DBV 5-Pin Top View Package D0008A 8-Pin Top View Pin Functions PIN NAME NUMBER I/O DESCRIPTION DBV D0008A -IN 4 2 I Inverting input +IN 3 3 I Non-inverting input N/C -- 5, 8 -- No connection OUTPUT 1 6 O Output V- 2 4 I Negative supply V+ 5 7 I Positive supply Submit Documentation Feedback Copyright (c) 1999-2014, Texas Instruments Incorporated Product Folder Links: LM7121 3 LM7121 SNOS750A - AUGUST 1999 - REVISED OCTOBER 2014 www.ti.com 6 Specifications 6.1 Absolute Maximum Ratings (1) over operating free-air temperature range (unless otherwise noted) (1) MIN Differential Input Voltage MAX UNIT 2 V (V+)-1.4, (V-)+1.4 V 36 V (2) Voltage at Input/Output Pins Supply Voltage (V+-V-) Output Short Circuit to Ground (3) Continuous Lead Temperature (soldering, 10 sec) 260 C Junction Temperature (4) 150 C (1) (2) (3) (4) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. Applies to both single-supply and split-supply operation. Continuous short circuit operation at elevated ambient temperature can result in exceeding the maximum allowed junction temperature of 150C. The maximum power dissipation is a function of TJ(max), RJA, and TA. The maximum allowable power dissipation at any ambient temperature is PD = (TJ(max)-TA)/RJA. All numbers apply for packages soldered directly into a PC board. Typical Values represent the most likely parametric norm. 6.2 Handling Ratings Tstg Storage temperature range V(ESD) Electrostatic discharge (1) MIN MAX UNIT -65 +150 C Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins (1) 2000 V JEDEC document JEP155 states that 2000-V HBM allows safe manufacturing with a standard ESD control process. Human body model, 1.5 k in series with 100 pF. 6.3 Recommended Operating Conditions over operating free-air temperature range (unless otherwise noted) MIN Operating Temperature Range NOM MAX -40 85 UNIT C 6.4 Thermal Information THERMAL METRIC (1) RJA (1) 4 Junction-to-ambient thermal resistance D0008A (8) DBV (5) UNIT 165 325 C/W For more information about traditional and new thermal metrics, see the IC Package Thermal Metrics application report, SPRA953. Submit Documentation Feedback Copyright (c) 1999-2014, Texas Instruments Incorporated Product Folder Links: LM7121 LM7121 www.ti.com SNOS750A - AUGUST 1999 - REVISED OCTOBER 2014 6.5 15V DC Electrical Characteristics Unless otherwise specified, all limits ensured for V+ = +15V, V- = -15V, VCM = VO = 0 V and RL > 1 M. Boldface limits apply at the temperature extremes. PARAMETER TEST CONDITIONS TYP (1) LM7121I LIMIT (2) UNIT VOS Input Offset Voltage 0.9 8 15 mV max IB Input Bias Current 5.2 9.5 12 A max IOS Input Offset Current 0.04 4.3 7 A max RIN Input Resistance CIN Input Capacitance Common Mode 10 M Differential Mode 3.4 M Common Mode 2.3 pF CMRR Common Mode Rejection Ratio -10V VCM 10V 93 73 70 +PSRR Positive Power Supply Rejection Ratio 10V V+ 15 V 86 70 68 dB min -PSRR Negative Power Supply Rejection Ratio -15V V- -10V 81 68 65 dB min VCM Input Common-Mode Voltage Range CMRR 70 dB AV Large Signal Voltage Gain RL = 2 k , VO = 20 VPP 13 11 V min -13 -11 V max 72 65 57 dB min 13.4 11.1 10.8 V min -13.4 -11.2 -11.0 V max 10.2 7.75 7.0 V min -7.0 -5.0 -4.8 V max Sourcing 71 54 44 mA min Sinking 52 39 34 mA min 5.3 6.6 7.5 mA max RL = 2 k VO Output Swing RL = 150 ISC IS (1) (2) dB min Output Short Circuit Current Supply Current Typical Values represent the most likely parametric norm. All limits are ensured by testing or statistical analysis. Submit Documentation Feedback Copyright (c) 1999-2014, Texas Instruments Incorporated Product Folder Links: LM7121 5 LM7121 SNOS750A - AUGUST 1999 - REVISED OCTOBER 2014 www.ti.com 6.6 15V AC Electrical Characteristics Unless otherwise specified, all limits ensured for V+ = 15V, V- = -15V, VCM = VO = 0 V and RL > 1 M. Boldface limits apply at the temperature extremes. PARAMETER TEST CONDITIONS TYP (1) LM7121I LIMIT (2) UNIT SR Slew Rate (3) AV = +2, RL = 1 k, VO = 20 VPP 1300 V/s GBW Unity Gain-Bandwidth RL = 1 k 175 MHz Om Phase Margin 63 Deg RL = 100 , AV = +1 235 RL = 100 , AV = +2 50 f (-3 dB) Bandwidth (4) (5) ts Settling Time 10 VPP Step, to 0.1%, RL = 500 74 ns tr, tf Rise and Fall Time (5) AV = +2, RL = 100 , VO = 0.4 VPP 5.3 ns AD Differential Gain AV = +2, RL = 150 0.3% OD Differential Phase AV = +2, RL = 150 0.65 en Input-Referred Voltage Noise f = 10 kHz in Input-Referred Current Noise f = 10 kHz T.H.D. (1) (2) (3) (4) (5) Total Harmonic Distortion MHz Deg 17 nV / HZ 1.9 pA / HZ 2 VPP Output, RL = 150 , AV = +2, f = 1 MHz 0.065% 2 VPP Output, RL = 150 , AV = +2, f = 5 MHz 0.52% Typical Values represent the most likely parametric norm. All limits are ensured by testing or statistical analysis. Slew rate is the average of the rising and falling slew rates. Unity gain operation for 5 V and 15 V supplies is with a feedback network of 510 and 3 pF in parallel (see Application and Implementation). For +5V single supply operation, feedback is a direct short from the output to the inverting input. AV = +2 operation with 2 k resistors and 2 pF capacitor from summing node to ground. 6.7 5V DC Electrical Characteristics Unless otherwise specified, all limits ensured for V+ = 5V, V- = -5V, VCM = VO = 0 V and RL > 1 M. Boldface limits apply at the temperature extremes. PARAMETER TEST CONDITIONS TYP (1) LM7121I LIMIT (2) UNIT VOS Input Offset Voltage 1.6 8 15 mV max IB Input Bias Current 5.5 9.5 12 A max IOS Input Offset Current 0.07 4.3 7.0 A max RIN Input Resistance CIN Common Mode 6.8 M Differential Mode 3.4 M Input Capacitance Common Mode 2.3 pF CMRR Common Mode Rejection Ratio -2V VCM 2V 75 65 60 dB min +PSRR Positive Power Supply Rejection Ratio 3V V+ 5V 89 65 60 dB min -PSRR Negative Power Supply Rejection Ratio -5V V- -3V 78 65 60 dB min (1) (2) 6 Typical Values represent the most likely parametric norm. All limits are ensured by testing or statistical analysis. Submit Documentation Feedback Copyright (c) 1999-2014, Texas Instruments Incorporated Product Folder Links: LM7121 LM7121 www.ti.com SNOS750A - AUGUST 1999 - REVISED OCTOBER 2014 5V DC Electrical Characteristics (continued) Unless otherwise specified, all limits ensured for V+ = 5V, V- = -5V, VCM = VO = 0 V and RL > 1 M. Boldface limits apply at the temperature extremes. TYP (1) LM7121I LIMIT (2) 3 2.5 V min -3 -2.5 V max 66 60 58 dB min 3.62 3.0 2.75 V min -3.62 -3.0 -2.70 V max 3.1 2.5 2.3 V min -2.8 -2.15 -2.00 V max Sourcing 53 38 33 mA min Sinking 29 21 19 mA min 5.1 6.4 7.2 mA max PARAMETER VCM TEST CONDITIONS CMRR 60 dB Input Common Mode Voltage Range AV Large Signal Voltage Gain RL = 2 k, VO = 3 VPP RL = 2 k VO Output Swing RL = 150 ISC Output Short Circuit Current IS UNIT Supply Current 6.8 5V AC Electrical Characteristics Unless otherwise specified, all limits ensured for V+ = 5V, V- = -5V, VCM = VO = 0 V and RL > 1 M. Boldface limits apply at the temperature extremes. PARAMETER TEST CONDITIONS TYP (1) LM7121I LIMIT (2) UNIT SR Slew Rate (3) AV = +2, RL = 1 k, VO = 6 VPP 520 V/s GBW Unity Gain-Bandwidth RL = 1 k 105 MHz Om Phase Margin RL = 1 k 74 Deg f (-3 dB) Bandwidth (4) (5) RL = 100 , AV = +1 160 MHz RL = 100 , AV = +2 50 MHz ts Settling Time 5 VPP Step, to 0.1%, RL = 500 65 ns tr, tf Rise and Fall Time (5) AV = +2, RL = 100 , VO = 0.4 VPP 5.8 ns AD Differential Gain AV = +2, RL = 150 0.3% OD Differential Phase AV = +2, RL = 150 0.65 en Input-Referred Voltage Noise f = 10 kHz 17 nV / Hz in Input-Referred Current Noise f = 10 kHz 2 pA / Hz T.H.D. (1) (2) (3) (4) (5) Total Harmonic Distortion 2 VPP Output, RL = 150 , AV = +2, f = 1 MHz 0.1% 2 VPP Output, RL = 150 , AV = +2, f = 5 MHz 0.6 Deg Typical Values represent the most likely parametric norm. All limits are ensured by testing or statistical analysis. Slew rate is the average of the rising and falling slew rates. Unity gain operation for 5 V and 15 V supplies is with a feedback network of 510 and 3 pF in parallel (see Application and Implementation). For +5V single supply operation, feedback is a direct short from the output to the inverting input. AV = +2 operation with 2 k resistors and 2 pF capacitor from summing node to ground. Submit Documentation Feedback Copyright (c) 1999-2014, Texas Instruments Incorporated Product Folder Links: LM7121 7 LM7121 SNOS750A - AUGUST 1999 - REVISED OCTOBER 2014 www.ti.com 6.9 +5V DC Electrical Characteristics Unless otherwise specified, all limits ensured for V+ = +5V, V- = 0 V, VCM = VO = V+/2 and RL > 1 M. Boldface limits apply at the temperature extremes. PARAMETER VOS Input Offset Voltage IB Input Bias Current IOS Input Offset Current RIN Input Resistance TYP (1) TEST CONDITIONS LM7121I LIMIT (2) UNIT 2.4 mV 4 A 0.04 A Common Mode 2.6 M Differential Mode 3.4 M CIN Input Capacitance Common Mode 2.3 pF CMRR Common Mode Rejection Ratio 2V VCM 3V 65 dB dB + +PSRR Positive Power Supply Rejection Ratio 4.6V V 5V 85 -PSRR Negative Power Supply Rejection Ratio 0V V- 0.4V 61 dB 3.5 V min VCM Input Common-Mode Voltage Range CMRR 45 dB 1.5 V max AV Large Signal Voltage Gain RL = 2 k to V+/2 64 dB RL = 2 k to V+/2, High 3.7 RL = 2 k to V+/2, Low 1.3 VO Output Swing ISC Output Short Circuit Current IS Supply Current + RL = 150 to V /2, High 3.48 RL = 150 to V+/2, Low 1.59 Sourcing Sinking (1) (2) V 33 mA 20 mA 4.8 mA Typical Values represent the most likely parametric norm. All limits are ensured by testing or statistical analysis. 6.10 +5V AC Electrical Characteristics Unless otherwise specified, all limits ensured for V+ = +5V, V- = 0 V, VCM = VO = V+/2 and RL > 1 M. Boldface limits apply at the temperature extremes. PARAMETER Slew Rate (3) AV = +2, RL = 1 k to V /2, VO = 1.8 VPP GBW Unity Gain-Bandwidth Om Phase Margin Bandwidth (4) (5) tr, tf Rise and Fall Time (5) T.H.D. (1) (2) (3) (4) (5) 8 Total Harmonic Distortion LM7121I LIMIT (2) UNIT + SR f (-3 dB) TYP (1) TEST CONDITIONS 145 V/s RL = 1k to V+/2 80 MHz RL = 1k to V+/2 70 Deg RL = 100 to V+/2, AV = +1 200 RL = 100 to V+/2, AV = +2 45 AV = +2, RL = 100 , VO = 0.2 VPP 8 0.6 VPP Output, RL = 150 , AV = +2, f = 1 MHz 0.067% 0.6 VPP Output, RL = 150 , AV = +2, f = 5 MHz 0.33% MHz ns Typical Values represent the most likely parametric norm. All limits are ensured by testing or statistical analysis. Slew rate is the average of the rising and falling slew rates. Unity gain operation for 5 V and 15 V supplies is with a feedback network of 510 and 3 pF in parallel (see Application and Implementation). For +5V single supply operation, feedback is a direct short from the output to the inverting input. AV = +2 operation with 2 k resistors and 2 pF capacitor from summing node to ground. Submit Documentation Feedback Copyright (c) 1999-2014, Texas Instruments Incorporated Product Folder Links: LM7121 LM7121 www.ti.com SNOS750A - AUGUST 1999 - REVISED OCTOBER 2014 6.11 Typical Characteristics Figure 1. Supply Current vs. Supply Voltage Figure 2. Supply Current vs. Temperature Figure 3. Input Offset Voltage vs. Temperature Figure 4. Input Bias Current vs Temperature Figure 5. Input Offset Voltage vs. Common Mode Voltage at VS = 15 V Figure 6. Input Offset Voltage vs. Common Mode Voltage at VS = 5 V Submit Documentation Feedback Copyright (c) 1999-2014, Texas Instruments Incorporated Product Folder Links: LM7121 9 LM7121 SNOS750A - AUGUST 1999 - REVISED OCTOBER 2014 www.ti.com Typical Characteristics (continued) 10 Figure 7. Short Circuit Current vs. Temperature (Sourcing) Figure 8. Short Circuit Current vs Temperature (Sinking) Figure 9. Output Voltage vs Output Current (ISINK, VS = 15 V) Figure 10. Output Voltage vs Output Current (ISOURCE, VS = 15 V) Figure 11. Output Voltage vs Output Current (ISOURCE, VS = 5 V) Figure 12. Output Voltage vs Output Current (ISINK, VS = 5 V) Submit Documentation Feedback Copyright (c) 1999-2014, Texas Instruments Incorporated Product Folder Links: LM7121 LM7121 www.ti.com SNOS750A - AUGUST 1999 - REVISED OCTOBER 2014 Typical Characteristics (continued) Figure 13. Output Voltage vs. Output Current (ISOURCE, VS = +5 V) Figure 14. Output Voltage vs Output Current (ISINK, VS = +5 V) Figure 15. CMRR vs. Frequency Figure 16. PSRR vs. Frequency Figure 17. PSRR vs. Frequency Figure 18. Open Loop Frequency Response Submit Documentation Feedback Copyright (c) 1999-2014, Texas Instruments Incorporated Product Folder Links: LM7121 11 LM7121 SNOS750A - AUGUST 1999 - REVISED OCTOBER 2014 www.ti.com Typical Characteristics (continued) 12 Figure 19. Open Loop Frequency Response Figure 20. Open Loop Frequency Response Figure 21. Unity Gain Frequency vs. Supply Voltage Figure 22. GBWP at 10 MHz vs. Supply Voltage Figure 23. Large Signal Voltage Gain vs. Load, VS = 15 V Figure 24. Large Signal Voltage Gain vs. Load, VS = 5 V Submit Documentation Feedback Copyright (c) 1999-2014, Texas Instruments Incorporated Product Folder Links: LM7121 LM7121 www.ti.com SNOS750A - AUGUST 1999 - REVISED OCTOBER 2014 Typical Characteristics (continued) Figure 25. Input Voltage Noise vs. Frequency Figure 26. Input Current Noise vs. Frequency Figure 27. Input Voltage Noise vs. Frequency Figure 28. Input Current Noise vs. Frequency Figure 29. Slew Rate vs. Supply Voltage Figure 30. Slew Rate vs. Input Voltage Submit Documentation Feedback Copyright (c) 1999-2014, Texas Instruments Incorporated Product Folder Links: LM7121 13 LM7121 SNOS750A - AUGUST 1999 - REVISED OCTOBER 2014 www.ti.com Typical Characteristics (continued) 14 Figure 31. Slew Rate vs. Input Voltage Figure 32. Slew Rate vs. Load Capacitance Figure 33. Large Signal Pulse Response, AV = -1 VS = 15 V Figure 34. Large Signal Pulse Response, AV = -1, VS = 5V Figure 35. Large Signal Pulse Response, AV = -1, VS = +5 V Figure 36. Large Signal Pulse Response, AV = +1, VS = 15 V Submit Documentation Feedback Copyright (c) 1999-2014, Texas Instruments Incorporated Product Folder Links: LM7121 LM7121 www.ti.com SNOS750A - AUGUST 1999 - REVISED OCTOBER 2014 Typical Characteristics (continued) Figure 37. Large Signal Pulse Response, AV = +1, VS = 5 V Figure 39. Large Signal Pulse Response, AV = +2, VS = 15 V Figure 41. Large Signal Pulse Response, AV = +2, VS = +5 V Figure 38. Large Signal Pulse Response, AV = +1, VS = +5 V Figure 40. Large Signal Pulse Response, AV= +2, VS = 5 V Figure 42. Small Signal Pulse Response, AV = -1, VS = 15 V, RL = 100 Submit Documentation Feedback Copyright (c) 1999-2014, Texas Instruments Incorporated Product Folder Links: LM7121 15 LM7121 SNOS750A - AUGUST 1999 - REVISED OCTOBER 2014 www.ti.com Typical Characteristics (continued) 16 Figure 43. Small Signal Pulse Response, AV = - 1, VS = 5 V, RL= 100 Figure 44. Small Signal Pulse Response, AV = -1, VS = +5 V, RL = 100 Figure 45. Small Signal Pulse Response, A V = +1, VS = 15 V, RL = 100 Figure 46. Small Signal Pulse Response, A V = +1, V S = 5 V, RL = 100 Figure 47. Small Signal Pulse Response, AV = +1, VS = +5 V, RL = 100 Figure 48. Small Signal Pulse Response, AV = +2, VS = 15 V, RL = 100 Submit Documentation Feedback Copyright (c) 1999-2014, Texas Instruments Incorporated Product Folder Links: LM7121 LM7121 www.ti.com SNOS750A - AUGUST 1999 - REVISED OCTOBER 2014 Typical Characteristics (continued) Figure 49. Small Signal Pulse Response, AV = +2, VS = 5 V, RL = 100 Figure 50. Small Signal Pulse Response, AV = +2, VS = +5 V, RL = 100 Figure 51. Closed Loop Frequency Response vs. Temperature, VS = 15 V, AV = +1, RL = 100 Figure 52. Closed Loop Frequency Response vs. Temperature VS = 5 V, AV = +1, RL = 100 Figure 53. Closed Loop Frequency Response vs. Temperature, VS = +5 V, AV = +1, RL= 100 Figure 54. Closed Loop Frequency Response vs. Temperature, VS = 15 V, AV = +2, RL= 100 Submit Documentation Feedback Copyright (c) 1999-2014, Texas Instruments Incorporated Product Folder Links: LM7121 17 LM7121 SNOS750A - AUGUST 1999 - REVISED OCTOBER 2014 www.ti.com Typical Characteristics (continued) 18 Figure 55. Closed Loop Frequncy Response vs. Temperature, VS = 5 V, AV = +2 , RL = 100 Figure 56. Closed Loop Frequency Response vs. Temperature, VS = +5 V, AV = +2, RL = 100 Figure 57. Closed Loop Frequency Response vs. Capacitance Load (AV = +1, VS = 15 V) Figure 58. Closed Loop Frequency Response vs. Capacitive Load (AV = +1, VS = 5 V) Figure 59. Closed Loop Frequency Response vs. Capacitive Load (AV = +2, VS = 15 V) Figure 60. Closed Loop Frequency Response vs. Capacitive Load (AV = +2, VS = 5 V) Submit Documentation Feedback Copyright (c) 1999-2014, Texas Instruments Incorporated Product Folder Links: LM7121 LM7121 www.ti.com SNOS750A - AUGUST 1999 - REVISED OCTOBER 2014 Typical Characteristics (continued) Figure 61. Total Harmonic Distortion vs. Frequency Figure 62. Total Harmonic Distortion vs. Frequency Figure 63. Total Harmonic Distortion vs. Frequency Figure 64. Total Harmonic Distortion vs. Frequency Figure 65. Undistorted Output Swing vs. Frequency Figure 66. Undistorted Output Swing vs. Frequency Submit Documentation Feedback Copyright (c) 1999-2014, Texas Instruments Incorporated Product Folder Links: LM7121 19 LM7121 SNOS750A - AUGUST 1999 - REVISED OCTOBER 2014 www.ti.com Typical Characteristics (continued) Figure 67. Undistorted Output Swing vs. Frequency 20 Figure 68. Total Power Dissipation vs. Ambient Temperature Submit Documentation Feedback Copyright (c) 1999-2014, Texas Instruments Incorporated Product Folder Links: LM7121 LM7121 www.ti.com SNOS750A - AUGUST 1999 - REVISED OCTOBER 2014 7 Application and Implementation NOTE Information in the following applications sections is not part of the TI component specification, and TI does not warrant its accuracy or completeness. TI's customers are responsible for determining suitability of components for their purposes. Customers should validate and test their design implementation to confirm system functionality. 7.1 Application Information Table 1 depicts the maximum operating supply voltage for each package type Table 1. Maximum Supply Voltage Values SOT-23 SO-8 Single Supply 10 V 30 V Dual Supplies 5 V 15 V Stable unity gain operation is possible with supply voltage of 5 V for all capacitive loads. This allows the possibility of using the device in portable applications with low supply voltages with minimum components around it. Above a supply voltage of 6 V (3 V Dual supplies), an additional resistor and capacitor (shown in Figure 69) should be placed in the feedback path to achieve stability at unity gain over the full temperature range. The package power dissipation should be taken into account when operating at high ambient temperatures and/or high power dissipative conditions. Refer to the power derating curves in the data sheet for each type of package. In determining maximum operable temperature of the device, make sure the total power dissipation of the device is considered; this includes the power dissipated in the device with a load connected to the output as well as the nominal dissipation of the op amp. The device is capable of tolerating momentary short circuits from its output to ground but prolonged operation in this mode will damage the device, if the maximum allowed junction temperation is exceeded. Submit Documentation Feedback Copyright (c) 1999-2014, Texas Instruments Incorporated Product Folder Links: LM7121 21 LM7121 SNOS750A - AUGUST 1999 - REVISED OCTOBER 2014 www.ti.com 7.2 Typical Applications Figure 69. Typical Circuit for AV = +1 Operation (VS = 6 V) Figure 70. Simple Circuit to Improve Linearity and Output Drive Current Figure 71. AV = -1 CC = 2 pF for RL = 100 CC = Open for RL = Open Figure 72. AV = +2 22 Submit Documentation Feedback Copyright (c) 1999-2014, Texas Instruments Incorporated Product Folder Links: LM7121 LM7121 www.ti.com SNOS750A - AUGUST 1999 - REVISED OCTOBER 2014 Typical Applications (continued) Figure 73. AV = +2, Capacitive Load RF = 0 , CC = Open for VS < 6 V RF = 510 , CC = 3 pF for VS 6 V Figure 74. AV = +1 RF = 0 , CC = Open for VS < 6 V RF = 510 , CC = 3 pF for VS 6 V Figure 75. AV = +1. VS = +5 V, Single Supply Operation 7.2.1 Design Requirements 7.2.1.1 Current Boost Circuit The circuit in Figure 70 can be used to achieve good linearity along with high output current capability. By proper choice of R3, the LM7121 output can be set to supply a minimal amount of current, thereby improving its output linearity. R3 can be adjusted to allow for different loads: R3 = 0.1 RL (1) Figure 70 has been set for a load of 100 . Reasonable speeds (< 30 ns rise and fall times) can be expected up to 120 mApp of load current (see Figure 77 for step response across the load). Submit Documentation Feedback Copyright (c) 1999-2014, Texas Instruments Incorporated Product Folder Links: LM7121 23 LM7121 SNOS750A - AUGUST 1999 - REVISED OCTOBER 2014 www.ti.com Typical Applications (continued) 7.2.2 Detailed Design Procedure It is very important to keep the lead lengths to a minimum and to provide a low impedance current path by using a ground-plane on the board. CAUTION If RL is removed, the current balance at the output of LM7121 would be disturbed and it would have to supply the full amount of load current. This might damage the part if power dissipation limit is exceeded. 7.2.2.1 Color Video on Twisted Pairs Using Single Supply The circuit shown in Figure 76 can be used to drive in excess of 25 meters length of twisted pair cable with no loss of resolution or picture definition when driving a NTSC monitor at the load end. Pin numbers shown are for SO-8 package. * Input termination of NTSC monitor. Figure 76. Single Supply Differential Twister Pair Cable Transmitter/Receiver, 8.5 V VCC 30 V 24 Submit Documentation Feedback Copyright (c) 1999-2014, Texas Instruments Incorporated Product Folder Links: LM7121 LM7121 www.ti.com SNOS750A - AUGUST 1999 - REVISED OCTOBER 2014 Typical Applications (continued) Differential Gain and Differential Phase errors measured at the load are less than 1% and 1 respectively RG and CC can be adjusted for various cable lengths to compensate for the line losses and for proper response at the output. Values shown correspond to a twisted pair cable length of 25 meters with about 3 turns/inch (see Figure 78 for step response). The supply voltage can vary from 8.5 V up to 30 V with the output rise and fall times under 12 ns. With the component values shown, the overall gain from the input to the output is about 1. Even though the transmission line is not terminated in its nominal characteristic impedance of about 600 , the resulting reflection at the load is only about 5% of the total signal and in most cases can be neglected. Using 75 termination instead, has the advantage of operating at a low impedance and results in a higher realizable bandwidth and signal fidelity. 7.2.3 Application Performance Plots Figure 77. Waveform across a 100- Load Figure 78. Step Response to a 1 VPP Input Signal Measured across the 75- Load Submit Documentation Feedback Copyright (c) 1999-2014, Texas Instruments Incorporated Product Folder Links: LM7121 25 LM7121 SNOS750A - AUGUST 1999 - REVISED OCTOBER 2014 www.ti.com 8 Device and Documentation Support 8.1 Trademarks All trademarks are the property of their respective owners. 8.2 Electrostatic Discharge Caution These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. 8.3 Glossary SLYZ022 -- TI Glossary. This glossary lists and explains terms, acronyms, and definitions. 9 Mechanical, Packaging, and Orderable Information The following pages include mechanical, packaging, and orderable information. This information is the most current data available for the designated devices. This data is subject to change without notice and revision of this document. For browser-based versions of this data sheet, refer to the left-hand navigation. 26 Submit Documentation Feedback Copyright (c) 1999-2014, Texas Instruments Incorporated Product Folder Links: LM7121 PACKAGE OPTION ADDENDUM www.ti.com 10-Dec-2020 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (C) Device Marking (3) (4/5) (6) LM7121IM NRND SOIC D 8 95 Non-RoHS & Non-Green Call TI Call TI -40 to 85 LM71 21IM LM7121IM/NOPB ACTIVE SOIC D 8 95 RoHS & Green SN Level-1-260C-UNLIM -40 to 85 LM71 21IM LM7121IM5 NRND SOT-23 DBV 5 1000 Non-RoHS & Non-Green Call TI Call TI -40 to 85 A03A LM7121IM5/NOPB ACTIVE SOT-23 DBV 5 1000 RoHS & Green SN Level-1-260C-UNLIM -40 to 85 A03A LM7121IM5X/NOPB ACTIVE SOT-23 DBV 5 3000 RoHS & Green SN Level-1-260C-UNLIM -40 to 85 A03A LM7121IMX/NOPB ACTIVE SOIC D 8 2500 RoHS & Green SN Level-1-260C-UNLIM -40 to 85 LM71 21IM (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of <=1000ppm threshold. Antimony trioxide based flame retardants must also meet the <=1000ppm threshold requirement. (3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. Addendum-Page 1 Samples PACKAGE OPTION ADDENDUM www.ti.com 10-Dec-2020 (6) Lead finish/Ball material - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead finish/Ball material values may wrap to two lines if the finish value exceeds the maximum column width. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2 IMPORTANT NOTICE AND DISCLAIMER TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES "AS IS" AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS. These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable standards, and any other safety, security, or other requirements. These resources are subject to change without notice. TI grants you permission to use these resources only for development of an application that uses the TI products described in the resource. Other reproduction and display of these resources is prohibited. No license is granted to any other TI intellectual property right or to any third party intellectual property right. TI disclaims responsibility for, and you will fully indemnify TI and its representatives against, any claims, damages, costs, losses, and liabilities arising out of your use of these resources. TI's products are provided subject to TI's Terms of Sale (www.ti.com/legal/termsofsale.html) or other applicable terms available either on ti.com or provided in conjunction with such TI products. TI's provision of these resources does not expand or otherwise alter TI's applicable warranties or warranty disclaimers for TI products. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2020, Texas Instruments Incorporated