SPEC NO: DSAF1100 REV NO: V.5 DATE: APR/19/2011 PAGE: 1 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1203002069
1.6X1.25mm BI-COLOR SMD CHIP LED LAMP
Part Number: APTB1612SYKCGKC-F01
Super Bright Yellow
Green
Features
z1.6mmx1.25mm SMT LED, 0.65mm thickness.
zBi-color,low power consumption.
zWide viewing angle.
zIdeal for backlight and indicator.
zVarious colors and lens types available.
zPackage : 2000pcs / reel.
zMoisture sensitivity level : level 3.
zRoHS compliant.
Description
The Super Bright Yellow device is made with AlGaInP (on
GaAs substrate) light emitting diode chip.
The Green source color devices are made with AlGaInP on
GaAs substrate Light Emitting Diode.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2(0.008") unless otherwise noted.
3.The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4.The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAF1100 REV NO: V.5 DATE: APR/19/2011 PAGE: 2 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1203002069
Selection Guide
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Dice Lens Type
Iv (mcd) [2]
@ 20mA
V
iewing
Angle [1]
Min. Typ. 2θ1/2
APTB1612SYKCGKC-F01
Super Bright Yellow (AlGaInP)
Water Clear
80 120
Green (AlGaInP) 20 55
120°
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Super Bright Yellow
Green
590
574 nm IF=20mA
λD [1] Dominant Wavelength Super Bright Yellow
Green
590
570 nm IF=20mA
Δλ1/2 Spectral Line Half-width Super Bright Yellow
Green
20
20 nm IF=20mA
C Capacitance Super Bright Yellow
Green
20
15 pF VF=0V;f=1MHz
VF [2] Forward Voltage Super Bright Yellow
Green
2
2.1
2.5
2.5 V IF=20mA
IR Reverse Current Super Bright Yellow
Green 10
10 uA VR = 5V
Parameter Super Bright Yellow Green Units
Power dissipation 75 75 mW
DC Forward Current 30 30 mA
Peak Forward Current [1] 175 150 mA
Reverse Voltage 5 V
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +85°C
SPEC NO: DSAF1100 REV NO: V.5 DATE: APR/19/2011 PAGE: 3 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1203002069
APTB1612SYKCGKC-F01
Super Bright Yellow
SPEC NO: DSAF1100 REV NO: V.5 DATE: APR/19/2011 PAGE: 4 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1203002069
Green
SPEC NO: DSAF1100 REV NO: V.5 DATE: APR/19/2011 PAGE: 5 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1203002069
APTB1612SYKCGKC-F01
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Reel Dimension
Tape Dimensions
(Units : mm)
SPEC NO: DSAF1100 REV NO: V.5 DATE: APR/19/2011 PAGE: 6 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1203002069
PACKING & LABEL SPECIFICATIONS APTB1612SYKCGKC-F01