February 2015
DocID027467 Rev 1
1/4
www.st.com
STEVAL-MKI158V1
AIS3624DQ adapter board for a standard DIL24 socket
Features
Complete AIS3624DQ pin-out for a standard
DIL24 socket
Fully compatible with STEVAL-MKI109V2
motherboard
RoHS compliant
Description
The STEVAL-MKI158V1 is an adapter board
designed to facilitate the evaluation of MEMS
inertial devices in the AIS3624DQ product family.
The board offers an effective solution for fast
system prototyping and device evaluation directly
within the user’s own application.
The STEVAL-MKI158V1 can be plugged into a
standard DIL24 socket. The adapter provides the
complete AIS3624DQ pinout and comes ready-
to-use with the required decoupling capacitors on
the VDD power supply line.
This adapter is supported by STEVAL-MKI109V2
motherboard which includes a high performance
32-bit microcontroller functioning as a bridge
between the sensor and a PC, on which it is
possible to use the downloadable graphical user
interface (Unico GUI), or dedicated software
routines for customized applications.
Schematic diagram
STEVAL-MKI158V1
2/4
DocID027467 Rev 1
1 Schematic diagram
Figure 1: STEVAL-MKI158V1 circuit schematic
1
2
3
4
5
6
7
8
9
10
11
12
JP1
Header 12
24
23
22
21
20
19
18
17
16
15
14
13
JP2
Header 12
+C2
10µF
C1
100nF
VDD
NC
2
NC
1
INT_2
3
Reserved
4
VDD
5
GND
6
INT_1
7
GND
8
GND
9
GND
10
SPC/SCL
11
CS
12
NC 24
NC 23
NC 22
NC 21
NC 20
NC 19
Reserved 13
VDD_IO 14
SDO/SA0 15
SDI/SDO/SDA 16
NC 17
NC 18
U1
AIS3624DQ
INT_2
GND
INT_2
GND
INT_1
INT_1
GND
SPC/SCL
SPC/SCL
CS
CS
VDD_IO
VDD_IO
SDO/SA0
SDO/SA0
SDI/SDO/SDA
VDD
VDD
VDD
GND
SDI/SDO/SDA
GSPG0902151030SG
STEVAL-MKI158V1
Revision history
DocID027467 Rev 1
3/4
2 Revision history
Table 1: Document revision history
Date
Rev
Changes
26-Feb-2015
1
First release.
STEVAL-MKI158V1
4/4
DocID027467 Rev 1
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and
improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST
products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order
acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the
design of Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2015 STMicroelectronics – All rights reserved
