PHOENIX CONTACT Deutschland GmbH Page 1 / 5
http://www.phoenixcontact.de Feb 4, 2011
Extract from the online
catalog
FL SWITCH SMCS 8GT
Order No.: 2891123
http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2891123
Smart managed compact switch with eight RJ45 Gigabit ports
Commercial data
GTIN (EAN)
4 046356 149679
Note Made-to-order
sales group K000
Pack 1 pcs.
Customs tariff 85176200
Catalog page information Page 184 (AX-2009)
Product notes
WEEE/RoHS-compliant since:
04/17/2007
http://
www.download.phoenixcontact.com
Please note that the data given
here has been taken from the
online catalog. For comprehensive
information and data, please refer
to the user documentation. The
General Terms and Conditions of
Use apply to Internet downloads.
Product description
Installation notes
The device is designed for installation in zone 2.
Installation, operation, and servicing may only be carried out by qualified personnel.
Follow the installation instructions described in the operating instructions.
When installing and operating the device, the applicable safety directives (including national safety directives), accident
prevention regulations, as well as general technical regulations, must be observed. The safety-relevant data can be
found in the package slip.
FL SWITCH SMCS 8GT Order No.: 2891123
http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2891123
PHOENIX CONTACT Deutschland GmbH Page 2 / 5
http://www.phoenixcontact.de Feb 4, 2011
Access to the circuits within the device is not permitted. Do not repair the device yourself, but replace it with an
equivalent device. Repairs may be carried out only by the manufacturer.
The IP20 protection (IEC 60529/EN60529) of the device is intended for use in a clean and dry environment. The device
must not be subject to mechanical strain and/or thermal loads, which exceed the limits described. The device is not
designed for use in environments with danger of dust explosions.
The DIN rail must be connected to protective earth ground.
Installation in zone 2
Observe the specified conditions for use in potentially explosive areas! At the time of installation, use an approved
housing (minimum protection IP54), which meets the requirements of EN 60079-15. Observe the requirements of the EN
60079-14.
The snapping of the switches and the connection and disconnecting lines are permissible only if they are not live.
The unintentional disconnection from the RJ45 plug is prevented by appropriate measures, for example with a FL
PATCH GUARD or the FL PATCH SAFE CLIP.
In zone 2, only connect devices to the supply and signal circuits that are suitable for operation in potentially explosive
areas of zone 2 and the conditions at the installation location.
The device should be switched off and immediately removed from the Ex area if it is damaged, or has been overloaded,
inappropriately stored or has malfunctions.
Technical data
Interfaces
Interface Ethernet
No. of ports 8
Type of connection RJ45
Transmission physics Copper
Transmission speed 10/100/1000 MBit/s
Transmission length 100 m (per segment)
Signal LEDs Supply voltage, data transmission, error, link, activity
Interface Serial (V.24 (RS-232))
Type of connection V.24 (RS-232-C), 6-pos. MINI-DIN female connector (PS/2)
No. of ports 8
Function
Basic functions Store-and-forward switch complies with IEEE 802.3 2 priority
classes as per IEEE 802.1 P TCP/IP protocol, BootP-capable,
port-mirroring, integrated web server function, multicast
filtering, IGMP snooping, VLAN, Rapid Spanning Tree (RSTP),
PROFINET IO Device, media redundancy protocol (MRP).
Management Web based management, SNMP or over V.24 (RS-232)
Supported browsers Internet Explorer 5.5 or higher
FL SWITCH SMCS 8GT Order No.: 2891123
http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2891123
PHOENIX CONTACT Deutschland GmbH Page 3 / 5
http://www.phoenixcontact.de Feb 4, 2011
Redundancy Spanning Tree 802.1d, Rapid Spanning Tree 802.1w, Fast Ring
Detection, Media Redundancy Protocol (MRP) as per IEC62439
Status and diagnostic indicators Per Ethernet 2 status LEDs: LINK and status activity with switch-
over, 100, full duplex, supply voltage Us1 and Us2 (redundant
supply voltage) and FAIL
Network expansion parameters
Cascading depth Network, linear, and star structure: any
Maximum conductor length ((twisted pair) 100 m
Supply voltage
Supply voltage 24 V DC
Residual ripple 3.6 VPP (within the permitted voltage range)
Supply voltage range 18 V DC ... 32 V DC
Typical current consumption 600 mA (at US = 24 V DC)
General data
Weight 650 g
Width 128 mm
Height 100 mm
Depth 69 mm
Degree of protection IP20
Ambient temperature (operation) 0 °C ... 55 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C
Permissible humidity (operation) 5 % ... 95 % (no condensation)
Permissible humidity (storage/transport) 5 % ... 95 % (no condensation)
Air pressure (operation) 86 kPa ... 108 kPa (1500 m above sea level)
Air pressure (storage/transport) 66 kPa ... 108 kPa (3500 m above sea level)
Noise emission EN 61000-6-3:2001+A11
Noise immunity EN 61000-6-2:2005
Certificates / Approvals
Certification ABS, BV, CUL, DNV, GL, GOST, LR, UL
FL SWITCH SMCS 8GT Order No.: 2891123
http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2891123
PHOENIX CONTACT Deutschland GmbH Page 4 / 5
http://www.phoenixcontact.de Feb 4, 2011
Accessories
Item Designation Description
Cable/conductor
2891181 FL CAT6 PATCH 0,3 Patch cable, CAT6, pre-assembled, 0.3 m
2891288 FL CAT6 PATCH 0,5 Patch cable, CAT6, pre-assembled, 0.5 m
2891385 FL CAT6 PATCH 1,0 Patch cable, CAT6, pre-assembled, 1.0 m
2891482 FL CAT6 PATCH 1,5 Patch cable, CAT6, pre-assembled, 1.5 m
2891877 FL CAT6 PATCH 10 Patch cable, CAT6, pre-assembled, 10 m
2891369 FL CAT6 PATCH 12,5 Patch cable, CAT6, pre-assembled, 12.5 m
2891372 FL CAT6 PATCH 15,0 Patch cable, CAT6, pre-assembled, 15.0 m
2891589 FL CAT6 PATCH 2,0 Patch cable, CAT6, pre-assembled, 2.0 m
2891576 FL CAT6 PATCH 20,0 Patch cable, CAT6, pre-assembled, 20.0 m
2891686 FL CAT6 PATCH 3,0 Patch cable, CAT6, pre-assembled, 3.0 m
2891783 FL CAT6 PATCH 5,0 Patch cable, CAT6, pre-assembled, 5.0 m
2891880 FL CAT6 PATCH 7,5 Patch cable, CAT6, pre-assembled, 7.5 m
General
2891259 FL MEM PLUG Exchangeable configuration memory of the device settings for
simple device exchange and set-up
2891275 FL MEM PLUG/MRM Exchangeable configuration memory of the device settings
for simple device exchange and set-up In addition, the Media
Redundancy Manager (MRM) license for use is stored within the
Media Redundancy protocol (MRP).
2891068 FL PF 2TX CAT 6 Patch field with two RJ45 CAT6 network connections
2891071 FL PF 8TX CAT 6 Patch field with eight RJ45 CAT6 network connections
Plug/Adapter
2730611 PRG CAB MINI DIN Connection cable, to connect Remote Field Controllers to a PC
(RS-232) for PC WORX, 3 m in length
FL SWITCH SMCS 8GT Order No.: 2891123
http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2891123
PHOENIX CONTACT Deutschland GmbH Page 5 / 5
http://www.phoenixcontact.de Feb 4, 2011
Address
PHOENIX CONTACT Deutschland GmbH
Flachsmarktstr. 8
32825 Blomberg,Germany
Phone +49 5235 3 12000
Fax +49 5235 3 41200
http://www.phoenixcontact.de
© 2011 Phoenix Contact
Technical modifications reserved;