2.1x0.7mm RIGHT ANGLE SMD CHIP LED LAMP Part Number: APJA2107SURCK Hyper Red Features Description z 2.1x0.7mm right angle SMT LED, 1.3mm thickness. The Hyper Red source color devices are made with z Low power consumption. AlGaInP on GaAs substrate Light Emitting Diode. z Wide viewing angle. z Ideal for backlight and indicator. z Various colors and lens types available. z Package : 2000pcs / reel. z Moisture sensitivity level : level 3. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.15(0.006") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAD1026 REV NO: V.9 DATE: SEP/23/2009 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.Zhong ERP: 1203001552 Selection Guide Part No. Dice APJA2107SURCK Lens Type Hyper Red (AlGaInP) WATER CLEAR Viewing Angle [1] Iv (mcd) [2] @ 20mA Min. Typ. 21/2 110 250 120 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Hyper Red D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 650 nm IF=20mA Hyper Red 630 nm IF=20mA Spectral Line Half-width Hyper Red 28 nm IF=20mA C Capacitance Hyper Red 35 pF VF=0V;f=1MHz VF [2] Forward Voltage Hyper Red 1.95 2.5 V IF=20mA IR Reverse Current Hyper Red 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter Hyper Red Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 185 mA 5 V Reverse Voltage Operating Temperature -40C To +85C Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAD1026 REV NO: V.9 DATE: SEP/23/2009 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.Zhong ERP: 1203001552 Hyper Red APJA2107SURCK SPEC NO: DSAD1026 REV NO: V.9 DATE: SEP/23/2009 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.Zhong ERP: 1203001552 APJA2107SURCK Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Tape Dimensions (Units : mm) SPEC NO: DSAD1026 REV NO: V.9 DATE: SEP/23/2009 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.Zhong ERP: 1203001552 PACKING & LABEL SPECIFICATIONS APJA2107SURCK SPEC NO: DSAD1026 REV NO: V.9 DATE: SEP/23/2009 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.Zhong ERP: 1203001552