196 DLC
www.vishay.com Vishay BCcomponents
Revision: 13-Mar-18 1Document Number: 28362
For technical questions, contact: energystorage@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Energy Storage Double Layer Capacitors
FEATURES
• Polarized capacitor with high charge density,
alternative product to rechargeable backup
batteries
• Dielectric: electric double layer
• Radial leads, cylindrical case, insulated with a
blue sleeve
• Available in both vertical and low-profile versions
• Unlimited charge and discharge cycle numbers
• No charge-discharge control circuitry and no series
resistor necessary
• Maintenance-free, no periodic replacement or service
necessary
• Ecologically beneficial (no Cd, no Li)
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Energy storage, for backup of semiconductor memories
(CMOS) in all fields of electronics
• Telecommunication, audio-video, EDP
• General industrial, clock and timer systems
MARKING
The capacitors are marked with the following information:
• Rated capacitance (in F)
• Rated voltage (in V)
• Date code, in accordance with IEC 60062
• Name of manufacturer
• Negative terminal identification
• Upper category temperature (at 85 °C types only)
QUICK REFERENCE DATA
DESCRIPTION
VALUE
STANDARD
FORM A
HIGH VOLTAGE
FORM A
HIGH
TEMPERATURE
FORM A
VERTICAL,
MINIATURIZED
FORM B
Nominal case sizes (Ø D x L in mm) 13 x 7 and 21 x 7.5 13 x 9 and 21 x 9 13 x 9 and 21 x 9 11.5 x 13 (vertical)
Rated capacitance range, CR0.047 F to1.0F 0.047 Fto0.68F 0.047 Fto0.68F 0.047F to0.33F
Tolerance on CR at 20 °C -20% to+80 %
Rated voltage, UR5.5V 6.3V 5.5V 5.5V
Maximum surge voltage, US6.3V 7.0V 6.3V 6.3V
Category temperature range -25 °Cto+70 °C -25 °Cto+70°C -25 °Cto+85°C -25 °Cto+70°C
Useful life at UR:
at 85 °C - - 1000h -
at 70 °C 1000h 1000h 2800h 1000h
at 40 °C 8000h 8000h 23 000h 8000h
at 25 °C 23 000h 23 000h 64 000h 23 000h
Shelf life at 0 V 1000h at upper category temperature
Climatic category IEC60068 25 / 070 / 21 25 / 070 / 21 25 / 085 / 21 25 / 070 / 21
196 DLC
www.vishay.com Vishay BCcomponents
Revision: 13-Mar-18 2Document Number: 28362
For technical questions, contact: energystorage@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DIMENSIONS in millimeters AND AVAILABLE FORMS
Fig. 1 - Form A: Low profile
Fig. 2 - Form B: Vertical
Note
• Packaging: bulk in box
SELECTION CHART FOR CR, UR, AND FORM AT UPPER CATEGORY TEMPERATURE (UCT)
CR
(F) FORM UR = 5.5 V UR = 6.3 V
UCT = 85 °C UCT = 70 °C UCT = 70 °C
0.047 A 13 x 9 13 x 7 13 x 9
B - 11.5 x 13 -
0.1 A 13 x 9 x 9 13 x 7 13 x 9
B - 11.5 x 13 -
0.22 A - 13 x 7 -
B - 11.5 x 13 -
0.33 A - 13 x 7 -
B - 11.5 x 13 -
0.47 A 21 x 9 21 x 7.5 21 x 9
B- - -
0.68 A 21 x 9 - 21 x 9
B- - -
1.0 A - 21 x 7.5 -
DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES
NOMINAL CASE SIZE
Ø D x L (mm)
CASE
CODE FORM Ø Dmax. Lmax. MASS
(g)
PACKAGING
QUANTITIES
11.5 x 13 1 B 11.8 13.5 1.5 2000
13x 7 2 A 13.5 7.5 2.8 1000
13 x 9 3 A 13.5 9.5 3.4 1000
21x 7.5 4 A 21.5 8.0 7.1 500
21 x 9 5 A 21.5 9.5 8.8 500
L
Sleeve
Ø D 6 ± 1
6 ± 1
5 ± 0.3
0.5 ± 0.1 0.8 ± 0.1
1.2 ± 0.1
(0.8)
L
Laser weld
Sleeve
Solder plating
(4.5)
Ø D
5.0 ± 0.5
5.0 ± 0.3
4.0 ± 0.3
-+
196 DLC
www.vishay.com Vishay BCcomponents
Revision: 13-Mar-18 3Document Number: 28362
For technical questions, contact: energystorage@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
• Unless otherwise specified, all electrical values in Table 1 apply
at Tamb = 20 °C, P = 86 kPa to 106 kPa and RH = 45 % to 75 %
ORDERING EXAMPLE
Double layer capacitor 196 series
1.0 F / 5.5 V
Nominal case size: Ø 21 mm x 7.5 mm; Form A
Ordering code: MAL2 19612105E3
Former 12 NC: 2222 19612105
Table 1
ELECTRICAL DATA
SYMBOL DESCRIPTION
CRRated capacitance, tolerance -20 % / +80 %,
measured by constant current discharge method
UCT Upper category temperature
ILMax. leakage current after 30 min at UR
RIMax. internal resistance at 1 kHz
ELECTRICAL DATA AND ORDERING INFORMATION
UR
(V)
CR
(F)
NOMINAL
CASE SIZE
Ø D x L
(mm)
CASE
CODE FORM UCT
(°C)
IL
30 min
(μA)
RI
1 kHz
()
ORDERING CODE
STANDARD SERIES
5.5
0.047 13 x 7 2 A 70 69 120 MAL219612473E3
0.10 13 x 7 2 A 70 100 75 MAL219612104E3
0.22 13 x 7 2 A 70 135 75 MAL219612224E3
0.33 13 x 7 2 A 70 182 75 MAL219612334E3
0.47 21 x 7.5 4 A 70 216 30 MAL219612474E3
1.0 21 x 7.5 4 A 70 315 30 MAL219612105E3
HIGH TEMPERATURE SERIES
5.5
0.047 13 x 9 3 A 85 69 300 MAL219622473E3
0.10 13 x 9 3 A 85 100 200 MAL219622104E3
0.47 21 x 9 5 A 85 216 50 MAL219622474E3
0.68 21 x 9 5 A 85 260 50 MAL219622684E3
VERTICAL, MINIATURIZED SERIES
5.5
0.047 11.5 x 13 1 B 70 69 120 MAL219632473E3
0.10 11.5 x 13 1 B 70 100 75 MAL219632104E3
0.22 11.5 x 13 1 B 70 135 75 MAL219632224E3
0.33 11.5 x 13 1 B 70 182 75 MAL219632334E3
HIGH VOLTAGE SERIES
6.3
0.047 13x 9 3 A 70 69 300 MAL219613473E3
0.10 13 x 9 3 A 70 100 200 MAL219613104E3
0.47 21 x 9 5 A 70 216 50 MAL219613474E3
0.68 21 x 9 5 A 70 260 50 MAL219613684E3
196 DLC
www.vishay.com Vishay BCcomponents
Revision: 13-Mar-18 4Document Number: 28362
For technical questions, contact: energystorage@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MEASURING OF CHARACTERISTICS
CAPACITANCE (C)
Capacitance shall be measured by constant current
discharge method.
Fig. 3 - Voltage diagram for capacitance measurement
Capacitance value CR is given by discharge current ID, time
T and rated voltage UR, according to the following equation:
Fig. 4 - Test circuit for capacitance measurement
INTERNAL RESISTANCE (RI) AT 1 kHz
Fig. 5 - Test circuit for RI measurement
LEAKAGE CURRENT (IL)
Leakage current shall be measured after 30 min application
of rated voltage UR:
Fig. 6 - Test circuit for leakage current
Fig. 7 - Typical leakage current as a function of time
DISCHARGE CURRENT AS A FUNCTION OF
RATED CAPACITANCE
PARAMETER VALUE UNIT
Rated
capacitance, C
R
0.047 0.1 0.22 0.33 0.47 0.68 1.0 F
Discharge
current, I
D
0.1 1.0 mA
30 min T (s)
Time
0
2.0
UR
U
(V)
CF IDmA x 10-3 x T s
URV - 2
---------------------------------------------------------
=
A
VC
Constant
current
discharger
+
RI VCV
10-3
----------------
=
V
A
1 mA
C
1 kHz
+
ILA VV
10-4
------------
=
V
RS 100 Ω
C
++
1
102
10
Time (h)
2
4
5
1
1 10 20 30 40 50
IL
(µA)
Curve 1: 1.0 F, 5.5 V
Curve 2: 0.47 F, 5.5 V
Curve 3: 0.22 F, 5.5 V
Curve 4: 0.1 F, 5.5 V
Curve 5: 0.047 F, 5.5 V
RS = 100 Ω
3
196 DLC
www.vishay.com Vishay BCcomponents
Revision: 13-Mar-18 5Document Number: 28362
For technical questions, contact: energystorage@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DISCHARGE CHARACTERISTICS
Backup time of 196 DLC series capacitors depends on
minimum memory holding voltage and discharge current
(corresponding with the current consumption of the load).
For minimum backup times of standard and vertical
miniaturized series see Figures 8 and 9 (charging time
24 h).
Fig. 8 - Typical backup time as a function of discharge current
Fig. 9 - Typical backup time as a function of discharge current
Figure 10 shows the backup time when a 196 DLC capacitor
is discharged by a constant resistance
(charging time 24 h).
The horizontal axis shows the initial value of discharge
current if 5 V is connected to the capacitor via a fixed series
resistor.
Example: 1 μA corresponds to 5 M and 0.1 μA
corresponds to 50 M
The vertical axis shows that period of time during which the
voltage drops from 5 V to 2 V.
Fig. 10 - Typical backup time as a function
of initial discharge current
10
MGA695
1
105
104
103
102
10
Backup
time
(s)
Discharge current (mA)
10-3 10-2 10-1
5
4
3
2
1
Curve 1: 1.0 F, 5.5 V
Curve 2: 0.47 F, 5.5 V
Curve 3: 0.22 F, 5.5 V
Curve 4: 0.1 F, 5.5 V
Curve 5: 0.047 F, 5.5 V
Voltage drop from 5.0 V to 3.5 V
101
106
105
104
103
104
Backup
time
(s)
Discharge current (mA)
10-3 10-2 10-1
MGA696
5
4
3
2
1
Curve 1: 1.0 F, 5.5 V
Curve 2: 0.47 F, 5.5 V
Curve 3: 0.22 F, 5.5 V
Curve 4: 0.1 F, 5.5 V
Curve 5: 0.047 F, 5.5 V
Voltage drop:
from 5.0 V to 2.0 V
103
10 102
103
102
10
1
Backup
time
(s)
Initial value discharge current (μA)
10-2 10-1 1
MLB203
1
2
3
4
5
Curve 1: 1.0 F, 5.5 V
Curve 2: 0.47 F, 5.5 V
Curve 3: 0.22 F, 5.5 V
Curve 4: 0.1 F, 5.5 V
Curve 5: 0.047 F, 5.5 V
Voltage drop from 5.0 V to 2.0 V
by means of a xed resistor
196 DLC
www.vishay.com Vishay BCcomponents
Revision: 13-Mar-18 6Document Number: 28362
For technical questions, contact: energystorage@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Table 2
Statements about product lifetime are based on calculations and internal testing. They should only be interpreted as estimations. Also due to external factors, the
lifetime in the field application may deviate from the calculated lifetime. In general, nothing stated herein shall be construed as a guarantee of durability.
TEST PROCEDURES AND REQUIREMENTS for standard and vertical miniaturized series (5.5 V; 70 °C)
NAME OF TEST
IEC 60384-4 /
EN130300
SUBCLAUSE
PROCEDURE
(quick reference) REQUIREMENTS
Robustness of
terminations 4.4
Tensile strength; application of loading force for 10 s:
No breaks20 N (standard series)
5 N (vertical miniaturized series)
Resistance to
soldering heat 4.5 Solder bath; 260 °C; 5 s C/C: ± 10 %
RI and IL spec. limit
Solderability 4.6 Solder bath; 235 °C; 2 s 75 % tinning
Vibration 4.8 10 Hz to 55 Hz; 1.5 mm; 3 directions;
2 h per direction
C/C: ± 10 %
RI and IL spec. limit
Damp heat,
steady state 4.12 500 h at 55 °C; RH 90 % to 95 %;
no voltage applied
C/C: ± 30 %
RI 4 x spec. limit
IL 2 x spec. limit
Endurance 4.13 Tamb = 70 °C; 5.5 V applied;
1000 h
C/C: ± 30 %
RI 4 x spec. limit
IL 2 x spec. limit
Useful life - Tamb = 70 °C; 5.5 V applied;
1000 h
C/C: ± 30 %
RI 4 x spec. limit
IL 2 x spec. limit
Storage at upper
category temperature 4.17
Tamb = 70 °C;
no voltage applied;
1000 h
C/C: ± 30 %
RI 4 x spec. limit
IL 2 x spec. limit
Self discharge - 24 h storage at room temperature after application
of 5 V for 1 h Remaining voltage: 4 V
Characteristics at high
and low temperature 4.19
Step 1: reference measurement
at +20 °C of C, RI and IL
Step 2: measurement at -25 °C
Step 3: measurement at +20 °C
Step 4: measurement at +70 °C
Step 5: measurement at +20 °C
C/C: ± 30 % of +20 °C value
RI 5 x the +20 °C value
IL 4 x the +20 °C value
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 08-Feb-17 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Vishay:
MAL219612224E3 MAL219612105E3 MAL219612104E3 MAL219612473E3 MAL219622104E3 MAL219613474E3
MAL219632104E3 MAL219622474E3 MAL219632224E3 MAL219622473E3 MAL219632473E3 MAL219613473E3
MAL219613684E3 MAL219622684E3 MAL219612474E3 MAL219632334E3 MAL219613104E3 MAL219612334E3