C0G (NP0) Dielectric General Specifications C0G (NP0) is the most popular formulation of the "temperature-compensating," EIA Class I ceramic materials. Modern C0G (NP0) formulations contain neodymium, samarium and other rare earth oxides. C0G (NP0) ceramics offer one of the most stable capacitor dielectrics available. Capacitance change with temperature is 0 30ppm/C which is less than 0.3% C from -55C to +125C. Capacitance drift or hysteresis for C0G (NP0) ceramics is negligible at less than 0.05% versus up to 2% for films. Typical capacitance change with life is less than 0.1% for C0G (NP0), one-fifth that shown by most other dielectrics. C0G (NP0) formulations show no aging characteristics. PART NUMBER (see page 2 for complete part number explanation) 0805 5 A 101 J Size (L" x W") Voltage 6.3V = 6 10V = Z 16V = Y 25V = 3 50V = 5 100V = 1 200V = 2 500V = 7 Dielectric C0G (NP0) = A Capacitance Code (In pF) 2 Sig. Digits + Number of Zeros B C D F G J K = = = = = = = Capacitance Tolerance .10 pF (<10pF) .25 pF (<10pF) .50 pF (<10pF) 1% ( 10 pF) 2% ( 10 pF) 5% 10% A T 2 Failure Rate A = Not Applicable Terminations T = Plated Ni and Sn Contact Factory For 1 = Pd/Ag Term 7 = Gold Plated NOT RoHS COMPLIANT A Packaging 2 = 7" Reel 4 = 13" Reel U = 4mm TR (01005) Special Code A = Std. Product Contact Factory For Multiples Capacitance vs. Frequency +2 Typical Capacitance Change Envelope: 0 30 ppm/C % Capacitance +0.5 0 -0.5 +1 0 -1 -2 1KHz -55 -35 -15 +5 +25 +45 +65 +85 +105 +125 10 KHz 100 KHz Variation of Impedance with Cap Value Impedance vs. Frequency 0805 - C0G (NP0) 10 pF vs. 100 pF vs. 1000 pF Variation of Impedance with Chip Size Impedance vs. Frequency 1000 pF - C0G (NP0) 100 10 pF 10.0 1.0 100 pF 1000 pF 0.1 1 10 100 Frequency, MHz 1000 Impedance, 1,000 1206 0805 1812 1210 100 Frequency, MHz 100 0 0 20 40 60 80 100 Variation of Impedance with Ceramic Formulation Impedance vs. Frequency 1000 pF - C0G (NP0) vs X7R 0805 10.00 X7R NPO 1.0 0.1 10 1,000 Temperature C 10 10,000 Impedance, 10 MHz Frequency 100,000 4 1 MHz Temperature C Insulation Resistance vs Temperature 10,000 Impedance, % Capacitance Temperature Coefficient Insulation Resistance (Ohm-Farads) NOTE: Contact factory for availability of Termination and Tolerance Options for Specific Part Numbers. Contact factory for non-specified capacitance values. 1000 1.00 0.10 0.01 10 100 Frequency, MHz 1000 C0G (NP0) Dielectric Specifications and Test Methods Parameter/Test Operating Temperature Range Capacitance Insulation Resistance NP0 Specification Limits -55C to +125C Within specified tolerance <30 pF: Q 400+20 x Cap Value 30 pF: Q 1000 100,000M or 1000M - F, whichever is less Dielectric Strength No breakdown or visual defects Q Resistance to Flexure Stresses Appearance Capacitance Variation 5% or .5 pF, whichever is greater Q Meets Initial Values (As Above) Insulation Resistance Solderability Appearance Capacitance Variation Resistance to Solder Heat Thermal Shock Load Life Q Insulation Resistance Dielectric Strength Appearance Capacitance Variation Q Insulation Resistance Dielectric Strength Appearance Capacitance Variation Q (C=Nominal Cap) Insulation Resistance Dielectric Strength Appearance Capacitance Variation Load Humidity Q Insulation Resistance Dielectric Strength No defects Measuring Conditions Temperature Cycle Chamber Freq.: 1.0 MHz 10% for cap 1000 pF 1.0 kHz 10% for cap > 1000 pF Voltage: 1.0Vrms .2V Charge device with rated voltage for 60 5 secs @ room temp/humidity Charge device with 300% of rated voltage for 1-5 seconds, w/charge and discharge current limited to 50 mA (max) Note: Charge device with 150% of rated voltage for 500V devices. Deflection: 2mm Test Time: 30 seconds 1mm/sec Initial Value x 0.3 95% of each terminal should be covered with fresh solder No defects, <25% leaching of either end terminal 90 mm Dip device in eutectic solder at 230 5C for 5.0 0.5 seconds 2.5% or .25 pF, whichever is greater Meets Initial Values (As Above) Dip device in eutectic solder at 260C for 60 seconds. Store at room temperature for 24 2 hours before measuring electrical properties. Meets Initial Values (As Above) Meets Initial Values (As Above) No visual defects Step 1: -55C 2 30 3 minutes 2.5% or .25 pF, whichever is greater Step 2: Room Temp 3 minutes Meets Initial Values (As Above) Step 3: +125C 2 30 3 minutes Meets Initial Values (As Above) Step 4: Room Temp 3 minutes Meets Initial Values (As Above) Repeat for 5 cycles and measure after 24 hours at room temperature No visual defects 3.0% or .3 pF, whichever is greater 30 pF: 10 pF, <30 pF: <10 pF: Q 350 Q 275 +5C/2 Q 200 +10C Initial Value x 0.3 (See Above) Meets Initial Values (As Above) Charge device with twice rated voltage in test chamber set at 125C 2C for 1000 hours (+48, -0). Remove from test chamber and stabilize at room temperature for 24 hours before measuring. No visual defects 5.0% or .5 pF, whichever is greater 30 pF: 10 pF, <30 pF: <10 pF: Q 350 Q 275 +5C/2 Q 200 +10C Initial Value x 0.3 (See Above) Meets Initial Values (As Above) Store in a test chamber set at 85C 2C/ 85% 5% relative humidity for 1000 hours (+48, -0) with rated voltage applied. Remove from chamber and stabilize at room temperature for 24 2 hours before measuring. 5 C0G (NP0) Dielectric Capacitance Range PREFERRED SIZES ARE SHADED SIZE 0101* 0201 0402 0603 0805 1206 Soldering Packaging Reflow Only All Paper Reflow Only All Paper Reflow/Wave All Paper Reflow/Wave All Paper Reflow/Wave Paper/Embossed Reflow/Wave Paper/Embossed 1.60 0.15 (0.063 0.006) 0.81 0.15 (0.032 0.006) 0.35 0.15 (0.014 0.006) 50 100 G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G 16 J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J N N P P P P P P P 2.01 0.20 (0.079 0.008) 1.25 0.20 (0.049 0.008) 0.50 0.25 (0.020 0.010) 25 50 100 J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J N N N N N N N P P N P P N P P N P P P P P P P P 3.20 0.20 (0.126 0.008) 1.60 0.20 (0.063 0.008) 0.50 0.25 (0.020 0.010) 50 100 J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J M M M M P M P M P M P M P M P M P M P N P 16 25 6 16 G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G 25 G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G 16 25 200 G G G G G G G G G G G G G W *EIA 01005 Letter Max. Thickness 1.00 0.10 (0.040 0.004) 0.50 0.10 (0.020 0.004) 0.25 0.15 (0.010 0.006) 16 25 50 C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C L 200 J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J 16 J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J M M N 25 J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J M M N 200 16 25 200 J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J M Q Q Q Q Q Q Q 500 J J J J J J J J J J J J J J J J J J J J J J J J J J J J J M M M M M M P 200 500 T SIZE 0.40 0.02 0.60 0.03 (0.016 0.0008) (0.024 0.001) 0.20 0.02 0.30 0.03 (0.008 0.0008) (0.011 0.001) 0.10 0.04 0.15 0.05 (0.004 0.016) (0.006 0.002) 16 25 50 A B A B A B A A B A A B A A B A A B A A B A A B A A B A A B A A B A A B A A B A A B A A B A A B A A B A A B A A B A A B A A B A A B A A B A A B A A mm (in.) mm (W) Width (in.) (t) Terminal mm (in.) WVDC Cap 0.5 (pF) 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 Cap 0.010 (F) 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.068 0.082 0.1 WVDC (L) Length 16 25 0101* A 0.33 (0.013) B 0.22 (0.009) 50 0201 C 0.56 (0.022) PAPER t 16 25 50 0402 E 0.71 (0.028) 50 100 200 0603 G 0.90 (0.035) J 0.94 (0.037) K 1.02 (0.040) 50 100 50 0805 M 1.27 (0.050) N 1.40 (0.055) P Q 1.52 1.78 (0.060) (0.070) EMBOSSED 100 1206 X 2.29 (0.090) Y 2.54 (0.100) Z 2.79 (0.110) C0G (NP0) Dielectric Capacitance Range PREFERRED SIZES ARE SHADED 1210 1812 1825 2220 2225 Reflow Only Paper/Embossed Reflow Only All Embossed Reflow Only All Embossed Reflow Only All Embossed Reflow Only All Embossed 3.20 0.20 (0.126 0.008) 2.50 0.20 (0.098 0.008) 0.50 0.25 (0.020 0.010) 50 100 200 4.50 0.30 (0.177 0.012) 3.20 0.20 (0.126 0.008) 0.61 0.36 (0.024 0.014) 50 100 200 4.50 0.30 (0.177 0.012) 6.40 0.40 (0.252 0.016) 0.61 0.36 (0.024 0.014) 50 100 200 5.70 0.40 (0.225 0.016) 5.00 0.40 (0.197 0.016) 0.64 0.39 (0.025 0.015) 50 100 200 5.72 0.25 (0.225 0.010) 6.35 0.25 (0.250 0.010) 0.64 0.39 (0.025 0.015) 50 100 200 Cap (pF) 500 L A 0.33 (0.013) 25 W J J J J P P P P P P P P P P P P P J J J J P P P P P P P P P P P N N 25 50 SIZE Letter Max. Thickness 500 Cap (F) 25 (t) Terminal T (W) Width mm (in.) mm (in.) mm (in.) WVDC 0.5 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.068 0.082 0.1 WVDC (L) Length SIZE Soldering Packaging J J J P P P P P P P P P P P J K K P P P P P P 100 200 J J J J J J J J J J J J J J J J J J J M M M P P P P P 500 K K K K K K K K K K K K K K P P P P P X X Z Z Z 25 K K K K K K K K K K K M M M P P P P P X X Z Z Z 50 1210 C 0.56 (0.022) E 0.71 (0.028) PAPER N N N N N N N N N P X N N N N N P P P P P X M M M M P Q Q Q Q X M M M M X X X X X X X X X X X X X X X X X 100 200 500 50 1812 G 0.90 (0.035) J 0.94 (0.037) K 1.02 (0.040) M 1.27 (0.050) M M M M X X X X X X X X X X X X X X X M M M M M M X X X X X X X X X X X Y 100 200 X X X X X X X X X X X Y Y Z Z Z 50 1825 N 1.40 (0.055) P Q 1.52 1.78 (0.060) (0.070) EMBOSSED X X X X X X X X X X X 100 X X X X X X X X X X 200 2220 X 2.29 (0.090) Y 2.54 (0.100) t M M M M M M M M M M M M M M M M M P X X X X X Z 50 M M M M M M M M M M M M M M M M Y Y Y Y Z Z Z Z 100 P P P P P P P P P P P P P P Y Y Y Y Y Y 200 2225 Z 2.79 (0.110) 7