Document 159-1 Chip Inductors - 0805HS Series (2012) Ceramic body and wire wound construction provide highest SRFs available in 0805 size. These ultra-compact inductors provide exceptional Q values, even at high frequencies. These parts can be ordered with terminations that make them compliant with RoHS standards. Free evaluation samples are available by contacting Coilcraft or ordering them on-line at www.coilcraft.com. Part number1 Inductance2 (nH) Percent tolerance3 Q min4 SRF min5 (MHz) DCR max6 (Ohms) Irms7 (mA) Color code 0805HS-030T_B_ 0805HS-060T_B_ 0805HS-080T_B_ 0805HS-120T_B_ 0805HS-150T_B_ 0805HS-180T_B_ 0805HS-220T_B_ 0805HS-270T_B_ 0805HS-330T_B_ 0805HS-390T_B_ 0805HS-470T_B_ 0805HS-560T_B_ 0805HS-680T_B_ 0805HS-820T_B_ 0805HS-101T_B_ 0805HS-121T_B_ 0805HS-151T_B_ 0805HS-181T_B_ 0805HS-221T_B_ 3.3 @ 250 MHz 6.8 @ 250 MHz 8.2 @ 250 MHz 12 @ 250 MHz 15 @ 250 MHz 18 @ 250 MHz 22 @ 250 MHz 27 @ 250 MHz 33 @ 250 MHz 39 @ 250 MHz 47 @ 200 MHz 56 @ 200 MHz 68 @ 200 MHz 82 @ 150 MHz 100 @ 150 MHz 120 @ 150 MHz 150 @ 100 MHz 180 @ 100 MHz 220 @ 100 MHz 20,10,5 20,10,5 20,10,5 20,10,5 20,10,5 20,10,5 20,10,5,2 20,10,5,2 20,10,5,2 20,10,5,2 20,10,5,2 10,5,2,1 10,5,2,1 10,5,2,1 10,5,2,1 10,5,2,1 10,5,2,1 10,5,2,1 10,5,2 50 @ 1500 MHz 50 @ 1000 MHz 50 @ 1000 MHz 50 @ 500 MHz 50 @ 500 MHz 50 @ 500 MHz 55 @ 500 MHz 55 @ 500 MHz 60 @ 500 MHz 60 @ 500 MHz 60 @ 500 MHz 60 @ 500 MHz 60 @ 500 MHz 65 @ 500 MHz 65 @ 500 MHz 50 @ 250 MHz 50 @ 250 MHz 50 @ 250 MHz 50 @ 250 MHz 7900 5500 4700 4000 3400 3300 2600 2500 2050 2000 1650 1550 1450 1300 1200 1100 920 870 850 0.08 0.11 0.12 0.15 0.17 0.20 0.22 0.25 0.27 0.29 0.31 0.34 0.38 0.42 0.46 0.51 0.56 0.64 0.70 600 600 600 600 600 600 500 500 500 500 500 500 500 400 400 400 400 400 400 Black Brown Red Orange Yellow Green Blue Violet Gray White Black Brown Red Orange Yellow Green Blue Violet Gray 1. When ordering, specify tolerance, termination, and packaging codes: 0805HS-221TJBC F = 1% G = 2% J = 5% K = 10% M = 20% (Table shows stock tolerances in bold.) Termination: B = Standard Ag/Pd/Pt L = RoHS compliant Ag/Pd/Pt Packaging: C = 7 machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13 machine-ready reel. EIA-481 embossed plastic tape (7500 parts per full reel). Tolerance: 2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/HP 4286A impedance analyzer with Coilcraft-provided correlation pieces. 3. Tolerances in bold are stocked for immediate shipment. 4. Q measured using an Agilent/HP 4291A with an Agilent/HP 16193 test fixture. 5. SRF measured using an Agilent/HP 8720D network analyzer and a Coilcraft SMD-D test fixture. 6. DCR measured on a Cambridge Technology micro-ohmmeter and a Coilcraft CCF858 test fixture. 7. Average current for a 15C rise above 25C ambient. 8. Operating temperature range -40C to +125C. 9. Electrical specifications at 25C. See Qualification Standards section for environmental and test data. Specifications subject to change without notice. Please check our website for latest information. Document 159-1 Revised 10/30/03 Document 159-2 0805HS Series (2012) Typical Q vs Frequency Typical L vs Frequency 100 1000 12 nH 90 3.3 nH 22 nH 39 nH 220 nH 80 6.8 nH 68 nH 100 nH 120 nH Inductance (nH) Q Factor 70 60 50 40 100 39 nH 15 nH 10 30 3.3 nH 20 10 1 0 10 1000 100 10000 10 B overall A 100 1000 Frequency (MHz) Frequency (MHz) H C F I G J F I E terminal Recommended Land Pattern Terminal wraparound: approx 0.015/0,38 both ends A max B max C max E F G H I J 0.085 0.060 0.057 0.050 0.020 0.040 0.070 0.040 0.030 2,16 1,52 1,45 1,27 0,51 1,02 1,78 1,02 0,76 Weight: 9.8 - 10.9 mg Terminations: Platinum/palladium/silver Tape and reel: 2000/7 reel; 7500/13 reel 8 mm tape width For packaging data see Tape and Reel Specifications section. Specifications subject to change without notice. Please check our website for latest information. Document 159-2 Revised 12/28/04