Specifications subject to change without notice.
Please check our website for latest information.
Chip Inductors
–
0805HS Series (2012)
Document 159-1
Document 159-1 Revised 10/30/03
Inductance2Percent SRF min5DCR max6Irms7Color
Part number1(nH) tolerance3Q min4(MHz) (Ohms) (mA) code
0805HS-030T_B_ 3.3 @ 250 MHz 20,10,550 @ 1500 MHz 7900 0.08 600 Black
0805HS-060T_B_ 6.8 @ 250 MHz 20,10,550 @ 1000 MHz 5500 0.11 600 Brown
0805HS-080T_B_ 8.2 @ 250 MHz 20,10,550 @ 1000 MHz 4700 0.12 600 Red
0805HS-120T_B_ 12 @ 250 MHz 20,10,550 @ 500 MHz 4000 0.15 600 Orange
0805HS-150T_B_ 15 @ 250 MHz 20,10,550 @ 500 MHz 3400 0.17 600 Yellow
0805HS-180T_B_ 18 @ 250 MHz 20,10,550 @ 500 MHz 3300 0.20 600 Green
0805HS-220T_B_ 22 @ 250 MHz 20,10,5,2 55 @ 500 MHz 2600 0.22 500 Blue
0805HS-270T_B_ 27 @ 250 MHz 20,10,5,2 55 @ 500 MHz 2500 0.25 500 Violet
0805HS-330T_B_ 33 @ 250 MHz 20,10,5,2 60 @ 500 MHz 2050 0.27 500 Gray
0805HS-390T_B_ 39 @ 250 MHz 20,10,5,2 60 @ 500 MHz 2000 0.29 500 White
0805HS-470T_B_ 47 @ 200 MHz 20,10,5,2 60 @ 500 MHz 1650 0.31 500 Black
0805HS-560T_B_ 56 @ 200 MHz 10,5,2,1 60 @ 500 MHz 1550 0.34 500 Brown
0805HS-680T_B_ 68 @ 200 MHz 10,5,2,1 60 @ 500 MHz 1450 0.38 500 Red
0805HS-820T_B_ 82 @ 150 MHz 10,5,2,1 65 @ 500 MHz 1300 0.42 400 Orange
0805HS-101T_B_ 100 @ 150 MHz 10,5,2,1 65 @ 500 MHz 1200 0.46 400 Yellow
0805HS-121T_B_ 120 @ 150 MHz 10,5,2,1 50 @ 250 MHz 1100 0.51 400 Green
0805HS-151T_B_ 150 @ 100 MHz 10,5,2,1 50 @ 250 MHz 920 0.56 400 Blue
0805HS-181T_B_ 180 @ 100 MHz 10,5,2,1 50 @ 250 MHz 870 0.64 400 Violet
0805HS-221T_B_ 220 @ 100 MHz 10,5,2 50 @ 250 MHz 850 0.70 400 Gray
1. When ordering, specify tolerance, termination, and packaging codes:
0805HS-221TJBC
Tolerance: F =1% G = 2% J = 5% K = 10% M = 20%
(Table shows stock tolerances in bold.)
Termination: B = Standard Ag/Pd/Pt L = RoHS compliant Ag/Pd/Pt
Packaging: C =7″ machine-ready reel. EIA-481 embossed plastic
tape (2000 parts per full reel).
B= Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
D=13″ machine-ready reel. EIA-481 embossed plastic
tape (7500 parts per full reel).
Ceramic body and wire wound construction provide high-
est SRFs available in 0805 size. These ultra-compact
inductors provide exceptional Q values, even at high
frequencies.
2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/HP
4286A impedance analyzer with Coilcraft-provided correlation pieces.
3. Tolerances in bold are stocked for immediate shipment.
4. Q measured using an Agilent/HP 4291A with an Agilent/HP 16193 test
fixture.
5. SRF measured using an Agilent/HP 8720D network analyzer and a
Coilcraft SMD-D test fixture.
6. DCR measured on a Cambridge Technology micro-ohmmeter and a
Coilcraft CCF858 test fixture.
7. Average current for a 15°C rise above 25°C ambient.
8. Operating temperature range −40°C to +125°C.
9. Electrical specifications at 25°C.
See Qualification Standards section for environmental and test data.
These parts can be ordered with terminations that make
them compliant with RoHS standards.
Free evaluation samples are available by contacting
Coilcraft or ordering them on-line at www.coilcraft.com.
0805HS Series (2012)
Specifications subject to change without notice.
Please check our website for latest information.
Document 159-2
Document 159-2 Revised 12/28/04
Typical Q vs Frequency Typical L vs Frequency
A max B max C max E F G H I J
0.085 0.060 0.057 0.050 0.020 0.040 0.070 0.040 0.030
2,16 1,52 1,45 1,27 0,51 1,02 1,78 1,02 0,76
1000
100
10
10 100
Frequency (MHz)
Inductance (nH)
1000
1
220 nH
100 nH
39 nH
15 nH
3.3 nH
12 nH
6.8 nH
3.3 nH
22 nH
39 nH
68 nH
120 nH
100
90
80
70
60
50
40
30
20
10
0
10 100
Frequency (MHz)
Q Factor
1000 10000
I
I
J
H
A
B
overall
F
G
E
terminal
F
C
Terminal wraparound:
approx 0.015/0,38 both ends Recommended
Land Pattern
Weight: 9.8 – 10.9 mg
Terminations: Platinum/palladium/silver
Tape and reel: 2000/7″ reel; 7500/13″ reel 8 mm tape width
For packaging data see Tape and Reel Specifications section.
