3.2 x 5 mm TCVCXO TV105A Series
www.bliley.com 2545 West Grandview Blvd Erie, PA. 16506 Tel (814) 838-3571
Page 1 of 2 Rev 2.0
Description:
The TV105A
Temperature
Compensated Voltage
Controllable Crystal
Oscillator (TCVCXO)
Series products provide a
wide range of options in
temperature stability,
operating frequency
range, and electronic
frequency adjustment in
a miniature 3.2 x 5 mm
ceramic SMD package.
Features:
•
Available in frequencies from
10 to 52 MHz with 13 MHz,
14.4 MHz, 20 MHz, and
other frequencies as standards
•
+/-5 to +/- 20 ppm pull range
•
Clipped Sine or CMOS
output
•
Standard 3.2 x 5 mm ceramic
SMD package
•
Analog Frequency vs.
Temperature compensation
technique
•
Excellent for GPS
Applications
•
RoHS-6 Lead-free compliant
Frequency Range, Operating Temperature, and Frequency Stability:
Frequency
Range
Operating
Temperature
Product
Code
Frequency
Stability
Product
Code
10 to 52 MHz
-20 to +70° C
C
+/- 0.5 ppm
A
-40 to +85° C
D
+/- 1.0 ppm
B
0 to +55° C
E
+/- 1.5 ppm
C
-10 to +60° C
F
+/- 2.0 ppm
D
-30 to +85° C
+/- 2.5 ppm
E
** Not all combinations of frequency stability over temperature available. Consult the factory for your specific requirements.
Aging:
(typical at 10 MHz after 30 days continuous operation)
Frequency Timeframe
Aging Product Code
10 MHz 1st Year +/- 1.0 ppm N/A
Phase Noise:
Frequency Offset
Phase Noise (Typ.) Product Code
10.0 MHz
1 Hz
- 60 dBc/Hz
N/A
10 Hz
- 85 dBc/Hz
100 Hz
-115 dBc/Hz
1 KHz
-135 dBc/Hz
10 KHz
-148 dBc/Hz
100 KHz
-150 dBc/Hz
3.2 x 5 mm TCVCXO TV105A Series
www.bliley.com 2545 West Grandview Blvd Erie, PA. 16506 Tel (814) 838-3571
Page 2 of 2 Rev 2.0
Supply Voltage (Vs):
Power Supply (Vs)
+3.3 Vdc
+/-10%
+5.0 Vdc
+/-10%
Product Code C D
Current Consumption:
Clipped Sine Wave
Supply Current 2.5 mA
Environmental:
Storage Temperature -55 to +125° C
Output Waveform:
Clipped Sine
Wave
HCMOS
Output
Product Code N/A
H
Output Level 0.8 V p-p min.
10% / 90% Vs
Load 10K // 10 pF
15pF
Pulling Range:
Tuning
Range
None(TCXO) +/-5 ppm
+/-8 ppm
+/-10 ppm
+/-12 ppm
+/-15 ppm
+/-20 ppm
Product
Code
T
(Pin 1 – Ground)
A B C D E F
**Note: Maximum pull available dependent upon required temperature stability
Ordering Options:
Operating
Temperature
Frequency
Stability
Supply
Voltage
Pulling
Range
Output Operating Frequency
C A C T N/A xx.xxxx MHz
D B D A H xx.xxxx
MHz
E C B xx.xxxx
MHz
F D C xx.xxxx
MHz
G E D xx.xxxx
MHz
E xx.xxxx
MHz
F
Leave Blank for
Clipped Sine
xx.xxxx
MHz
TV105A C A C A 10.0000 MHz
Product Selection Code (refer to the above example):
This part is RoHs compliant, -20 to +70C, +/- 0.50pm, 3.3 volt clipped sine wave
with +/- 5 ppm pull, 10MHz operating frequency.
** Not all combinations available in this product