VS-180RKI...PbF, VS-181RKI...PbF Series www.vishay.com Vishay Semiconductors Phase Control Thyristors (Stud Version), 180 A FEATURES * Hermetic glass-metal seal * International standard case TO-93 (TO-209AB) * Designed and qualified for industrial level * Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 TO-93 (TO-209AB) TYPICAL APPLICATIONS * DC motor controls PRIMARY CHARACTERISTICS * Controlled DC power supplies IT(AV) 180 A VDRM/VRRM 400 V, 800 V, 1000 V VTM 1.35 V IGT 65 mA TJ -40 C to +125 C Package TO-93 (TO-209AB) Circuit configuration Single SCR * AC controllers MAJOR RATINGS AND CHARACTERISTICS PARAMETER TEST CONDITIONS IT(AV) TC IT(RMS) VALUES UNITS 180 A 80 C 285 ITSM I2t 50 Hz 3800 60 Hz 4000 50 Hz 72 60 Hz 66 VDRM/VRRM tq Typical TJ A kA2s 400 to 1000 V 100 s -40 to +125 C ELECTRICAL SPECIFICATIONS VOLTAGE RATINGS PART NUMBER VS-180RKI VS-181RKI VOLTAGE CODE VDRM/VRRM, MAXIMUM REPETITIVE PEAK AND OFF-STATE VOLTAGE V VRSM, MAXIMUM NON-REPETITIVE PEAK VOLTAGE V 40 400 500 80 800 900 100 1000 1100 IDRM/IRRM MAXIMUM AT TJ = TJ MAXIMUM mA 30 Revision: 26-Sep-17 Document Number: 94382 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-180RKI...PbF, VS-181RKI...PbF Series www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL TEST CONDITIONS VALUES Maximum average on-state current at case temperature IT(AV) 180 conduction, half sine wave Maximum RMS on-state current IRMS DC at 79 C case temperature 285 t = 10 ms No voltage reapplied 3800 100 % VRRM reapplied 3500 Maximum peak, one-cycle non-repetitive surge current ITSM t = 8.3 ms t = 10 ms t = 8.3 ms t = 10 ms Maximum I2t for fusing I2t t = 8.3 ms t = 10 ms t = 8.3 ms Maximum I2t for fusing I2t No voltage reapplied A 80 C 4000 Sinusoidal half wave, intial TJ = TJ maximum 100 % VRRM reapplied t = 0.1 ms to 10 ms, no voltage reapplied 72 66 61 720 VT(TO)1 (16.7 % x x IT(AV) < I < x IT(AV)), TJ = TJ maximum 0.83 VT(TO)2 (I > x IT(AV)), TJ = TJ maximum 0.89 Low level value of on-state slope resistance rt1 (16.7 % x x IT(AV) < I < x IT(AV)), TJ = TJ maximum 0.92 High level value of on-state slope resistance rt2 (I > x IT(AV)), TJ = TJ maximum 0.81 Ipk = 570 A, TJ = TJ maximum, tp = 10 ms sine pulse 1.35 VTM IH Typical latching current IL TJ = 25 C, anode supply 12 V resistive load kA2s 56 Low level value of threshold voltage Maximum holding current A 3660 High level value of threshold voltage Maximum on-state voltage UNITS 180 600 1000 kA2s V m V mA SWITCHING PARAMETER Maximum non-repetitive rate of rise of turned-on current SYMBOL dI/dt VALUES UNITS Gate drive 20 V, 20 , tr 1 s TJ = TJ maximum, anode voltage 80 % VDRM TEST CONDITIONS 300 A/s Typical delay time td Gate current 1 A, dIg/dt = 1 A/s Vd = 0.67 % VDRM, TJ = 25 C 1.0 Typical turn-off time tq ITM = 50 A, TJ = TJ maximum, dI/dt = 10 A/s, VR = 100 V, dV/dt = 20 V/s 100 s BLOCKING PARAMETER SYMBOL Maximum critical rate of rise of off-state voltage dV/dt Maximum peak reverse and off-state leakage current IRRM, IDRM TEST CONDITIONS VALUES UNITS TJ = TJ maximum linear to 80 % rated VDRM 500 V/s TJ = TJ maximum rated VDRM/VRRM applied 30 mA Revision: 26-Sep-17 Document Number: 94382 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-180RKI...PbF, VS-181RKI...PbF Series www.vishay.com Vishay Semiconductors TRIGGERING PARAMETER SYMBOL Maximum peak gate power PGM Maximum average gate power PG(AV) Maximum peak positive gate current IGM Maximum peak positive gate voltage + VGM Maximum peak negative gate voltage - VGM DC gate current required to trigger IGT DC gate current not to trigger IGD DC gate voltage not to trigger VGD MAX. 10 TJ = TJ maximum, f = 50 Hz, d% = 50 2.0 A 20 V 5.0 TJ = - 40 C 130 - TJ = 25 C 65 150 35 - Maximum required gate trigger/ current/voltage are the lowest value which will trigger all units 12 V anode to cathode applied TJ = 25 C TJ = 125 C 2.0 - 1.2 2.5 0.9 TJ = TJ maximum Maximum gate current/voltage not to trigger is the maximum value which will not trigger any unit with rated VDRM anode to cathode applied UNITS W 3.0 TJ = TJ maximum, tp 5 ms TJ = - 40 C VGT TYP. TJ = TJ maximum, tp 5 ms TJ = 125 C DC gate voltage required to trigger VALUES TEST CONDITIONS mA V 10 mA 0.25 V VALUES UNITS THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Maximum operating junction temperature range TEST CONDITIONS TJ -40 to 125 Maximum storage temperature range TStg -40 to 150 Maximum thermal resistance, junction to case RthJC DC operation 0.15 Maximum thermal resistance, junction to ambient RthCS Mounting surface, smooth, flat and greased 0.04 Non-lubricated threads 31 (275) Lubricated threads 24.5 (210) C K/W Mounting force, 10 % Approximate weight 280 Case style See dimensions - link at the end of datasheet N*m (lbf * in) g TO-93 (TO-209AB) RthJC CONDUCTION CONDUCTION ANGLE SINUSOIDAL CONDUCTION RECTANGULAR CONDUCTION 180 0.050 0.032 120 0.063 0.059 90 0.080 0.082 60 0.118 0.124 30 0.225 0.228 TEST CONDITIONS UNITS TJ = TJ maximum K/W Note * The table above shows the increment of thermal resistance RthJC when devices operate at different conduction angles than DC Revision: 26-Sep-17 Document Number: 94382 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-180RKI...PbF, VS-181RKI...PbF Series www.vishay.com Vishay Semiconductors 130 130 RthJC (DC) = 0.15 K/W 120 110 O Conduction angle 100 90 80 30 60 120 90 Maximum Allowable Case Temperature (C) Maximum Allowable Case Temperature (C) RthJC (DC) = 0.15 K/W 120 110 O Conduction period 100 30 90 80 60 120 180 0 20 40 60 Average On-State Current (A) 94382_01 0 80 100 120 140 160 180 200 180 90 70 70 50 100 150 200 250 300 Average On-State Current (A) 94382_02 Fig. 1 - Current Ratings Characteristics Fig. 2 - Current Ratings Characteristics 240 O 40 Conduction angle 20 TJ = 125 C K/ R - 60 0.6 W 80 K/ 100 .1 120 K/ W 140 =0 RMS limit A 140 3 180 160 R thS 160 0. 200 W 180 220 K/ 180 120 90 60 30 2 200 Maximum Average On-State Power Loss (W) 240 220 0. Maximum Average On-State Power Loss (W) DC W 0.8 120 K/W /W 1K 100 80 60 1.5 40 2 K/W K/W 20 0 0 0 20 40 60 80 100 120 140 160 180 Average On-State Current (A) 94382_03a 0 25 50 75 100 125 Maximum Allowable Ambient Temperature (C) 94382_03b Fig. 3 - On-State Power Loss Characteristics O Conduction period 50 TJ = 125 C W 200 0.6 150 K/W 1 K/W 0.8 K/ 100 W 1.5 K/W 50 0 2 K/W 0 0 94382_04a K/ R - 100 0.3 W 150 K/ W 250 K/ RMS limit 2 1 0. 200 0. = 250 300 SA DC 180 120 90 60 30 300 Maximum Average On-State Power Loss (W) 350 R th Maximum Average On-State Power Loss (W) 350 50 100 150 200 250 Average On-State Current (A) 300 0 94382_04b 25 50 75 100 125 Maximum Allowable Ambient Temperature (C) Fig. 4 - On-State Power Loss Characteristics Revision: 26-Sep-17 Document Number: 94382 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-180RKI...PbF, VS-181RKI...PbF Series www.vishay.com Vishay Semiconductors 4000 At any rated load condition and with rated VRRM applied following surge. Initial TJ = 125 C at 60 Hz 0.0083 s at 50 Hz 0.0100 s 3500 Peak Half Sine Wave On-State Current (A) Peak Half Sine Wave On-State Current (A) 4000 3000 2500 2000 1500 1 10 3000 2500 2000 0.1 1 Pulse Train Duration (s) 94382_06 Fig. 5 - Maximum Non-Repetitive Surge Current Instantaneous On-State Current (A) 3500 1500 0.01 100 Number of Equal Amplitude Half Cycle Current Pulses (N) 94382_05 Maximum non-repetitive surge current versus pulse train duration. Control of conduction may not be maintained. Initial TJ = 125 C No voltage reapplied Rated VRRM reapplied Fig. 6 - Maximum Non-Repetitive Surge Current 10 000 TJ = 25 C 1000 TJ = 125 C 100 0.5 1.0 1.5 2.0 2.5 3.0 Instantaneous On-State Voltage (V) 94382_07 Fig. 7 - On-State Voltage Drop Characteristics ZthJC - Transient Thermal Impedance (K/W) 1 Steady state value RthJC = 0.15 K/W (DC operation) 0.1 0.01 0.001 0.001 94382_08 0.01 0.1 1 10 Square Wave Pulse Duration (s) Fig. 8 - Thermal impedance ZthJC Characteristics Revision: 26-Sep-17 Document Number: 94382 5 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-180RKI...PbF, VS-181RKI...PbF Series www.vishay.com Vishay Semiconductors 10 Rectangular gate pulse (a) Recommended load line for rated dI/dt: 20 V, 30 , tr 0.5 s, tp 6 s (b) Recommended load line for 30 % rated dI/dt: 15 V, 40 , tr 1 s, tp 6 s VGD 0.1 0.001 (a) TJ = 40 C TJ = 125 C 1 (1) PGM = 12 W, tp = 5 ms (2) PGM = 30 W, tp = 2 ms (3) PGM = 60 W, tp = 1 ms (4) PGM = 200 W, tp = 300 s (b) TJ = 25 C Instantaneous Gate Voltage (V) 100 (1) (2) (3) (4) Frequency limited by PG(AV) IGD 0.01 0.1 1 10 100 1000 Instantaneous Gate Current (A) 94382_09 Fig. 9 - Gate Characteristics ORDERING INFORMATION TABLE Device code VS- 18 1 RKI 100 PbF 1 2 3 4 5 6 1 - Vishay Semiconductors product 2 - IT(AV) rated average output current (rounded/10) 3 - 0 = eyelet terminals (gate and auxiliary cathode leads) 4 - 1 = fast-on terminals (gate and auxiliary cathode leads) Thyristor 5 - Voltage code x 10 = VRRM (see Voltage Ratings table) 6 - None = standard production PbF = lead (Pb)-free LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?95077 Revision: 26-Sep-17 Document Number: 94382 6 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions Vishay Semiconductors TO-209AB (TO-93) DIMENSIONS in millimeters (inches) Glass metal seal 19 (0.75) MAX. O 8.5 (0.33) O 4.3 (0.17) Red silicon rubber C.S. 0.51 mm2 (0.0008 s.i.) Red cathode 213.5 10 (8.41 0.39) White gate 238.5 10 (9.39 0.39) Red shrink 75 (2.95) MIN. White shrink O 28.5 (1.12) MAX. 28.5 (1.12) MAX. 16 (0.63) MAX. 21 (0.83) MAX. SW 32 3/4"-16UNF-2A 35 (1.38) MAX. 0 to 15 4 MAX. 38 MAX. Fast-on terminals AMP. 280000-1 REF-250 23 MIN. Flexible lead C.S. 35 mm2 (0.054 s.i.) Document Number: 95077 Revision: 19-May-10 For technical questions, contact: indmodules@vishay.com www.vishay.com 1 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: VS-180RKI80PBF VS-181RKI100PBF VS-180RKI40PBF VS-181RKI80PBF VS-180RKI100PBF VS-181RKI40PBF VS-180RKI80 VS-180RKI40 VS-180RKI100