Rhopoint Components Ltd Fax: +44 (0) 1883 712938 Phone: +44 (0) 1883 717988 web: www.rhopointcomponents.com e-mail: sales@rhopointcomponents.com
EE
EE
ECONOMYCONOMY
CONOMYCONOMY
CONOMY SIP R SIP R
SIP R SIP R
SIP REEDEED
EEDEED
EED R R
R R
RELAYSELAYS
ELAYSELAYS
ELAYS
The SIP relay is the industry choice for a wide variety of designs where
economy, performance and a compact package are needed. The 9007
Spartan Series is a general purpose economy version of the 9001 for
applications with less stringent requirements. The 9081 Spartan Series is
similar to the 9007, but with an alternate industry standard footprint of
.2”x.4”x.2”. These relays are well suited for applications in Security,
Instrument and Modems. The specification tables allow you to select the
appropriate relay for your application.
SS
SS
SERIESERIES
ERIESERIES
ERIES F F
F F
FEATURESEATURES
EATURESEATURES
EATURES
Ê Hermetically sealed contacts for long life
Ê High dielectric strength available, consult factory.
Ê High speed switching compared to electromechanical relays.
Ê Molded thermoset body on integral lead frame design.
Ê Two industry standard footprints.
Ê Optional Coil Suppression Diode - protects coil drive circuits.
Ê UL File # E67117, CSA File # LR 28537.
Ê 9081UL/cUL File # E67117.
Model 9007
Dimensions in Inches (Millimeters)
9000 Series/Spartan SIP Reed Relays
NEW!
Model 9081
30o
Rhopoint Components Ltd Fax: +44 (0) 1883 712938 Phone: +44 (0) 1883 717988 web: www.rhopointcomponents.com e-mail: sales@rhopointcomponents.com
Model Number 9007 9081
Parameters Tes t Co nditi ons Units . 2. 4.2 SIP
COI L SP ECS.
No m . Coi l Vo l tage VDC 5 12 5 12 24
Max. Coil Voltage VDC 6.5 15.0 6.5 15.0 32
Coil Resistance +/- 10%, 25° C Ω 500 1000 500 1000 2000
Operate Voltage Must Operate by VDC - Max. 3.75 9.1 3.75 9.1 18
Release Voltage Must Release by VDC - Min. 0.4 1.0 0.4 1.0 2
CONT ACT RATINGS
Switching Voltage Max DC/Peak AC Resist. Volts 200 200
Switching Current Max DC/Peak AC Resist. Amps 0.5 0.5
Carry Current Max DC/Peak AC Resist. Amps 1.0 1.0
Contact Rating Max DC/Peak AC Resist. Watts 10 10
Li f e E xpect ancy -Typ ical1Signal Level 1.0V, 1.0mA x 10 6 Ops. 100 100
Static Contact
Res i s t ance (max. i n it .) 50mV, 10m A Ω0.200 0.200
Dy nam ic Co n tac t
Resistance
(
max . in it.
)
0.5V, 50mA
at 100 Hz, 1.5 msec ΩN/A N/A
RELAY SPEC IF IC AT IO NS
Insulation Resistance
(minimum) Between all Isolated Pins
at 100V, 25°C, 40% RH Ωx 1010 x 1010
Capacitance - Typical
Across Open Contacts No Shield
Shield Floating
S hield Guarding
pF
pF
pF
0.7
-
-
0.7
-
-
Open Contact to Coil No Shield
Shield Floating
S hield Guarding
pF
pF
pF
1.4
-
-
1.4
-
-
Contact to Shield Contacts Open, Shield
Floating pF - -
Dielectric Strength
(minimum) Between Contacts
C o ntacts to Shi e ld
Contacts /Shi eld to Co il
VDC/pe a k AC
VDC/pe a k AC
VDC/pe a k AC
250
-
1500
250
-
1500
Operate Time - including
bounce - Typical At Nominal Coil Voltage,
30 Hz Square Wave msec. 0.50 0.50
Release Ti me - Typical Zener-Diode Suppression4
D iode Suppr ession
msec. 0.20
-0.20
-
Notes:
1 Consult factory for life expectancy at other switching
loads.
2 Optional diode is connected to pin #2 (+) and pin #3(-).
Correct coil polarity must be observed.
3 These relays contain bias magnets. Correct coil
polarity must be observed. Pin #2(+)
4 Consists of 20V Zener-diode and 1N1002 diode
in series, connected in parallel with coil.
9000 Series/Spartan SIP Reed Relays
Environmental Ratings
Storage Temp:-35°C to +100°C; Operating Temp:-20°C to +85°C
Solder Temp: 270°C max; 10 sec. max
The operate and release voltage and the coil resistance are
specified at 25°C. These values vary by approximately
0.4%/°C as the ambient temperature varies.
Vibration: 20 G’s to 2000 Hz; Shock: 50 G’s
NEW!
Top View:
Dot stamped
on relay refers
to pin #1
Grid = .1"x.1"
(2.54mm x
2.54mm)
22
++
