2.0x1.25mm SMD CHIP LED LAMP Part Number: KP-2012SECK-J3 Hyper Red Features Description z 2.0mmx1.25mm SMT LED,1.1mm thickness. The Hyper Red device is based on light emitting diode chip z Low power consumption. made from AlGaInP. z Wide viewing angle. z Ideal for backlight and indicator. z Various colors and lens types available. z Package : 2000pcs / reel. z Moisture sensitivity level : level 3. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.1(0.004") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAM9231 REV NO: V.1A DATE: MAR/20/2013 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui PAGE: 1 OF 5 Selection Guide Part No. Dice KP-2012SECK-J3 Iv (mcd) [2] @ 20mA Lens Type Hyper Red (AlGaInP) Min. Typ. 700 1100 *200 *350 Viewing Angle [1] 21/2 120 Water Clear Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. *Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Hyper Red D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 640 nm IF=20mA Hyper Red 625 nm IF=20mA Spectral Line Half-width Hyper Red 20 nm IF=20mA C Capacitance Hyper Red 27 pF VF=0V;f=1MHz VF [2] Forward Voltage Hyper Red 2.2 2.8 V IF=20mA IR Reverse Current Hyper Red 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter Hyper Red Units Power dissipation 84 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating Temperature -40C To +85C Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAM9231 REV NO: V.1A DATE: MAR/20/2013 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui PAGE: 2 OF 5 Hyper Red KP-2012SECK-J3 SPEC NO: DSAM9231 REV NO: V.1A DATE: MAR/20/2013 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui PAGE: 3 OF 5 KP-2012SECK-J3 Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Reel Dimension Tape Dimensions (Units : mm) SPEC NO: DSAM9231 REV NO: V.1A DATE: MAR/20/2013 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui PAGE: 4 OF 5 PACKING & LABEL SPECIFICATIONS KP-2012SECK-J3 Detailed application notes are listed on our website. http://www.kingbright.com/application_notes SPEC NO: DSAM9231 REV NO: V.1A DATE: MAR/20/2013 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui PAGE: 5 OF 5