TMR 3-2413WIE - TRACO Power

http://www.tracopower.com Page 1 of 3

DC/DC Converters

TMR 3WIE Series, 3 Watt

Order code Input voltage range Output voltage Output current max. Efﬁciency typ.

TMR 3-1210WIE 3.3 VDC 700 mA 74 %

TMR 3-1211WIE 5.0 VDC 600 mA 78 %

TMR 3-1212WIE 12 VDC 250 mA 80 %

TMR 3-1213WIE 4.5 – 18 VDC 15 VDC 200 mA 80 %

TMR 3-1221WIE (12 VDC nominal) ±5.0 VDC ±300 mA 70 %

TMR 3-1222WIE ±12 VDC ±125 mA 80 %

TMR 3-1223WIE ±15 VDC ±100 mA 80 %

TMR 3-2410WIE 3.3 VDC 700 mA 75 %

TMR 3-2411WIE 5.0 VDC 600 mA 80 %

TMR 3-2412WIE 12 VDC 250 mA 81 %

TMR 3-2413WIE 9 – 36 VDC 15 VDC 200 mA 81 %

TMR 3-2421WIE (24 VDC nominal) ±5.0 VDC ±300 mA 79 %

TMR 3-2422WIE ±12 VDC ±125 mA 80 %

TMR 3-2423WIE ±15 VDC ±100 mA 81 %

TMR 3-4810WIE 3.3 VDC 700 mA 74 %

TMR 3-4811WIE 5.0 VDC 600 mA 79 %

TMR 3-4812WIE 12 VDC 250 mA 79 %

TMR 3-4813WIE 18 – 75 VDC 15 VDC 200 mA 79 %

TMR 3-4821WIE (48 VDC nominal) ±5.0 VDC ±300 mA 79 %

TMR 3-4822WIE ±12 VDC ±125 mA 79 %

TMR 3-4823WIE ±15 VDC ±100 mA 80 %

Models

Features

◆ Wide 4:1 input voltage range

◆ Compact SIP-8 package

◆ Cost optimized design

◆ Temperature range –40°C to +85°C

◆ I/O isolation 1500 VDC

◆ Remote On/Off control

◆ 3-year product warranty

The TMR-3WIE series is a family of isolated 3 W dc-dc converter modules with

regulated output, featuring wide 4:1 input voltage ranges. The product comes in

a compact SIP-8 plastic package with small footprint occupying only 2.0 cm2 (0.3

square in.) of board space.

An excellent efﬁciency allows –40°C to +85°C operation temperature. Further fea-

tures include remote On/Off control and continuous short circuit protection. The

compact dimensions and cost optimized design make this converters an ideal solu-

tion for applications in communication equipment, instrumentation and industrial

electronics.

C B

Scheme

http://www.tracopower.com Page 2 of 3

All speciﬁcations valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

DC/DC Converters

TMR 3WIE Series 3 Watt

Input Specifications

Input current at no load (nominal input voltage) 12 V models: 60 mA typ.

24 V models: 25 mA typ.

48 V models: 15 mA typ.

Surge voltage (1000 msec. max.) 12 V models: 25 V max.

24 V models: 50 V max.

48 V models: 100 V max.

Start-up voltage / under voltage lockout 12 V models: 4.5 VDC / 4 VDC or lower

24 V models: 9 VDC / 8 VDC or lower

48 V models: 18 VDC / 16 VDC or lower

long term operation at undervoltage will

damage the converter!

max. reverse polarity input current 1.0 A

Recommended Input Fuse (Slow Blow) 12 V models: 1500 mA

24 V models: 700 mA

48 V models: 350 mA

Conducted noise (input) EN 55022 level A, FCC part 15, level A

with external components (see application note)

Output Specifications

Voltage set accuracy – Single Output Models ±1 % max.

– Dual Output Models ±2 % max. (balanced load)

Regulation – Input variation Vin min. to Vin max. 0.5 % max.

– Load variation 25 – 100% 1.0 % max.

Minimum load 25 % of rated max. load (operation at lower

load condition is safe but a higher output ripple

will be experienced)

Temperature coefficient 0.02 %/K

Ripple and noise (20 MHz bandwidth) 75 mVp-p max.

Transient response setting time (25% load step change) 500 µs max.

Short circuit protection continuous, automatic recovery

Capacitive load 3.3 VDC models: 1‘760 µF max.

5 VDC models: 1‘000 µF max.

12 VDC models: 170 µF max.

15 VDC models: 110 µF max.

±5 VDC models: 470 µF max. (each output)

±12 VDC models: 100 µF max. (each output)

±15 VDC models: 47 µF max. (each output)

General Specifications

Temperature ranges – Operating –40°C to +85°C (with derating)

– Case temperature +105°C max.

– Storage –55°C to +125°C

Load derating 3.3 %/K above +70°C

Humidity (non condensing) 95 % rel. H max.

Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) > 800‘000 h

Isolation voltage (60 sec.) – Input/Output 1’500 VDC

Isolation capacitance – Input/Output 200 pF typ.

Isolation resistance – Input/Output (500 VDC) >1 GOhm

Page 3 of 3

Speciﬁcations can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com

www.tracopower.com

DC/DC Converters

TMR 3WIE Series 3 Watt

Outline Dimensions

Pin single output dual output

1–Vin (GND) –Vin (GND)

2+Vin (Vcc) +Vin (Vcc)

3Remote On/Off Remote On/Off

5ntc. ntc.

6+Vout +Vout

7–Vout Common

8ntc. –Vout

Pinout

Rev. July 12, 2018

General Specifications

Switching frequency 350 kHz typ. (PFM)

Remote On/Off – On: < 0.6 VDC or open circuit

– Off: 2.7 to 15 VDC (ref. to –Vin)

– Off standby current: 2.5 mA max.

– Off control input current: 1 mA max.

Safety standards CAN/CSA-C22.2 No 60950-1-07 Incl. AM1 (2011)

ANSI/UL Std No 60950-1, 2nd Ed. Incl. AM1 (2011)

IEC 60950-1:2005 (2nd Edition); +A1:2009

– Certification documents www.tracopower.com/overview/tmr3wie

Physical Specifications

Casing material non-conductive plastic (UL 94V-0 rated)

Potting material Silicon, (UL 94V-0 rated)

Weight 4.8 g ( 0.17 oz )

Soldering temperature max. 260°C / 10 sec.

Environmental compliance – Reach www.tracopower.com/info/reach-declaration.pdf

– RoHS RoHS directive 2011/65/EU

Dimensions in [mm], () = Inch

Tolerances: ±0.5 (±0.02)

Pin pitch tolerances: ±0.25 (±0.01)

ntc. = Not to connect

20.8 (0.82)

123 6785

2 x 2.54 3 x 2.54

5.08

2.0

0.5

(0.02)

11.2

(0.44)

3.2

(0.13)

(2 x 0.1) (3 x 0.1)(0.2)

(0.08)

21.8 (0.86)

0.5

(0.02)

2.7

(0.11)

0.5

0.25

(0.01)

9.3 (0.37)

(0.02)

Bottom view

Supporting documents: www.tracopower.com/overview/tmr3wie

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

TRACO Power:

TMR 3-2413WIE TMR 3-1210WIE TMR 3-1222WIE TMR 3-1223WIE TMR 3-4811WIE TMR 3-4812WIE TMR 3-

2412WIE TMR 3-4821WIE TMR 3-4813WIE TMR 3-1221WIE TMR 3-4822WIE TMR 3-4810WIE TMR 3-2421WIE

TMR 3-4823WIE TMR 3-1211WIE TMR 3-2411WIE TMR 3-1212WIE TMR 3-2410WIE TMR 3-2422WIE TMR 3-

2423WIE TMR 3-1213WIE