NOTE
Except where indicated otherwise, the above figures are
average values and should not be regarded as MAXIMUM
or MINIMUM values for specification purposes. The
Company reserves the right to improve products and any
change in specification will result in a re-issue of the
relevant ‘Technical Data Sheet’. Customers should satisfy
themselves that the tape is suitable for their requirements
whether after such modifications or otherwise. Please
check that you have the latest issue of the ‘Technical Data
Sheet’. All slitting and length tolerances are to British
Standards. Before use the customer is advised to consult
the Health & Safety Data Sheet produced by the company
for this product, which is available on request.
STORAGE
Tapes stored below the minimum recommended tempera-
ture will require warming up to that level before use. Up to
24 hours may be required for this to take place.
Technical Data
Advance Tapes International Limited, PO Box 122,
Abbey Meadows, Leicester, LE4 5RA.
Tel: 0116 251 0191. Fax: 0116 265 2046. www.advancetapes.com
R
E
G
I
S
T
E
R
E
D
BS EN ISO 9002
Q05206
AFERA
Association des Fabricants Européens de
Rubans Auto-Adhésifs.
General description
A thin PVC film, coated with a low tack UV resistant adhesive.
Flame retardant.
Easy unwind.
Flexible.
Conformable to awkward shapes.
Water resistant.
Good abrasion resistance.
UV resistant.
Non-corrosive adhesive.
Low tack.
Clean peel.
Technical Details
Typical values
Thickness 0.13mm
Breaking Load 23 N/cm
Elongation 150%
Adhesion
Steel 0.30 N/cm
Service Temp 0°C to +60°C
Application Temp 0°C to +40°C
AT44 Low Tack
Protection Tape
Issue 06 February 2000
