LH1529AAC, LH1529AACTR, LH1529BB, LH1529BAC, LH1529BACTR
www.vishay.com Vishay Semiconductors
Rev. 1.5, 03-Aug-11 2Document Number: 83827
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
• Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
maximum ratings for extended periods of the time can adversely affect reliability.
(1) Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for through
hole devices (DIP).
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION SYMBOL VALUE UNIT
SSR
INPUT
LED continuous forward current IF50 mA
LED reverse voltage IR 10 μA VR5V
OUTPUT
DC or peak AC load voltage IL 50 μA VL350 V
Continuous DC load current IL120 mA
SSR
Total power dissipation Pdiss 600 mW
Ambient temperature range Tamb - 40 to + 85 °C
Storage temperature range Tstg - 40 to + 150 °C
Soldering temperature (1) t = 10 s max. Tsld 260 °C
Isolation test voltage (for 1 s) VISO 5300 VRMS
Isolation resistance VIO = 500 V, Tamb = 25 °C RIO 1012
VIO = 500 V, Tamb = 100 °C RIO 1011
OPTOCOUPLER
INPUT
LED continuous forward current IF50 mA
LED reverse voltage IR 10 μA VR5V
OUTPUT
Collector emitter breakdown voltage BVCEO 30 V
Phototransistor power dissipation Pdiss 150 mW
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
SSR
INPUT
LED forward current switch turn-on IL = 100 mA, t = 10 ms IFon 0.7 2 mA
LED forward current switch turn-off VL = ± 300 V IFoff 0.2 0.6 mA
LED forward voltage IF = 10 mA VF1.15 1.26 1.45 V
OUTPUT
On-resistance AC/DC, pins 4 (±) to 6 (±) IF = 5 mA, IL = ± 50 mA RON 12 20 25
Current limit IF = 5 mA, t = 5 ms,
VL = ± 6 V
LH1529AAC,
LH1529AACTR Ilimit 230 260 370 mA
LH1529BB Ilimit 170 210 250 mA
LH1529BAC,
LH1529BACTR Ilimit 170 210 250 mA
Off-state leakage current IF = 0 mA, VL = ± 100 V IO0.02 200 nA
IF = 0 mA, VL = ± 350 V IO1μA
Output capacitance pin 7 to pin 8 IF = 0 mA, VL = 1 V CO55 pF
IF = 0 mA, VL = 50 V CO10 pF
Capacitance (input to output) VISO = 1 V CIO 1.3 pF