BAS21AHT1G Low Leakage Switching Diode Features * NSV Prefix for Automotive and Other Applications Requiring * http://onsemi.com Unique Site and Control Change Requirements; AEC-Q101 Qualified and PPAP Capable These Devices are Pb-Free, Halogen Free/BFR Free and are RoHS Compliant LOW LEAKAGE SWITCHING DIODE MAXIMUM RATINGS Symbol VR VRRM IF IFM(surge) Rating Value Unit Continuous Reverse Voltage 250 Vdc Repetitive Peak Reverse Voltage 250 Vdc Peak Forward Current 200 mAdc Peak Forward Surge Current 625 mAdc 1 CATHODE Symbol Characteristic Max Unit PD Total Device Dissipation FR-5 Board, (Note 1) TA = 25C Derate above 25C 200 mW 1.57 mW/C 635 C/W -55 to +150 C TJ, Tstg Thermal Resistance, Junction-to-Ambient Junction and Storage Temperature Range MARKING DIAGRAM 2 THERMAL CHARACTERISTICS RqJA 2 ANODE Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. FR-5 Minimum Pad 1 AA M G G SOD-323 CASE 477 STYLE 1 AA M G = Device Code = Date Code* = Pb-Free Package (Note: Microdot may be in either location) *Date Code orientation may vary depending upon manufacturing location. ORDERING INFORMATION Package Shipping SOD-323 (Pb-Free) 3000/Tape & Reel NSVBAS21AHT1G SOD-323 (Pb-Free) 3000/Tape & Reel Device BAS21AHT1G For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. (c) Semiconductor Components Industries, LLC, 2014 August, 2014 - Rev. 2 1 Publication Order Number: BAS21AHT1/D BAS21AHT1G ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted) Characteristic Symbol Min Typ Max Unit - - - - 40 100 nAdc mAdc 250 - - Vdc - - - - 1000 1250 OFF CHARACTERISTICS IR Reverse Voltage Leakage Current (VR = 200 Vdc) (VR = 200 Vdc, TJ = 150C) Reverse Breakdown Voltage (IBR = 100 mAdc) V(BR) Forward Voltage (IF = 100 mAdc) (IF = 200 mAdc) VF mV Diode Capacitance (VR = 0, f = 1.0 MHz) CD - - 5.0 pF Reverse Recovery Time (IF = IR = 30 mAdc, RL = 100 W) trr - 50 - ns 820 W +10 V 2.0 k tr 0.1 mF 100 mH tp IF IF t trr 10% t 0.1 mF 90% D.U.T. 50 W INPUT SAMPLING OSCILLOSCOPE 50 W OUTPUT PULSE GENERATOR iR(REC) = 3.0 mA IR VR OUTPUT PULSE (IF = IR = 30 mA; MEASURED at iR(REC) = 3.0 mA) INPUT SIGNAL Notes: 1. A 2.0 kW variable resistor adjusted for a Forward Current (IF) of 30 mA. Notes: 2. Input pulse is adjusted so IR(peak) is equal to 30 mA. Notes: 3. tp trr Figure 1. Recovery Time Equivalent Test Circuit 1200 25C REVERSE CURRENT (nA) FORWARD VOLTAGE (mV) TA = -55C 1000 800 155C 600 400 200 7000 6000 5000 4000 3000 TA = 155C 6 5 4 3 2 TA = 25C 1 0 1 1 10 100 1000 TA = -55C 1 2 5 10 20 50 FORWARD CURRENT (mA) REVERSE VOLTAGE (V) Figure 2. Forward Voltage Figure 3. Reverse Leakage http://onsemi.com 2 100 200 300 BAS21AHT1G PACKAGE DIMENSIONS SOD-323 CASE 477-02 ISSUE H NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. LEAD THICKNESS SPECIFIED PER L/F DRAWING WITH SOLDER PLATING. 4. DIMENSIONS A AND B DO NOT INCLUDE MOLD FLASH, PROTRUSIONS OR GATE BURRS. 5. DIMENSION L IS MEASURED FROM END OF RADIUS. HE D b 1 2 E MILLIMETERS DIM MIN NOM MAX A 0.80 0.90 1.00 A1 0.00 0.05 0.10 A3 0.15 REF b 0.25 0.32 0.4 C 0.089 0.12 0.177 D 1.60 1.70 1.80 E 1.15 1.25 1.35 L 0.08 HE 2.30 2.50 2.70 A3 A C NOTE 3 L NOTE 5 A1 SOLDERING FOOTPRINT* INCHES NOM MAX 0.035 0.040 0.002 0.004 0.006 REF 0.010 0.012 0.016 0.003 0.005 0.007 0.062 0.066 0.070 0.045 0.049 0.053 0.003 0.090 0.098 0.105 MIN 0.031 0.000 STYLE 1: PIN 1. CATHODE 2. ANODE 0.63 0.025 0.83 0.033 1.60 0.063 2.85 0.112 *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and the are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries. SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 http://onsemi.com 3 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative BAS21AHT1/D