MICROWAVE POWER GaAs FET TIM1414-30L MICROWAVE SEMICONDUCTOR TECHNICAL DATA FEATURES HIGH POWER BROAD BAND INTERNALLY MATCHED FET P1dB=45.0dBm at 14.0GHz to 14.5GHz HIGH GAIN HERMETICALLY SEALED PACKAGE G1dB=5.5dB at 14.0GHz to 14.5GHz LOW INTERMODULATION DISTORTION IM3(Min.)=-25dBc at Po=38.0dBm Single Carrier Level RF PERFORMANCE SPECIFICATIONS CHARACTERISTICS Output Power at 1dB Gain SYMBOL CONDITIONS P1dB Compression Point Power Gain at 1dB Gain ( Ta= 25C ) VDS= 10V G1dB Compression Point Drain Current IDS1 Power Added Efficiency add 3rd Order Intermodulation IM3 Distortion IDSset7.0A f = 14.0 to 14.5GHz Two-Tone Test UNIT MIN. TYP. MAX. dBm 44.0 45.0 dB 4.5 5.5 A 10.0 11.0 % 23 dBc -25 A C 9.0 10.1 100 Po= 38.0dBm Drain Current IDS2 (Single Carrier Level) Channel Temperature Rise Tch (VDS X IDS +Pin-P1dB) X Rth(c-c) Recommended gate resistance(Rg) : Rg= 10 (MAX.) ELECTRICAL CHARACTERISTICS CHARACTERISTICS Transconductance Pinch-off Voltage SYMBOL gm VGSoff Saturated Drain Current IDSS Gate-Source Breakdown Voltage Thermal Resistance VGSO ( Ta= 25C ) CONDITIONS VDS= 3V IDS= 9.6A VDS= 3V IDS= 290mA VDS= 3V VGS= 0V IGS= -290A Rth(c-c) Channel to Case UNIT S MIN. V -0.7 -2.0 -4.5 A 20.0 V -5 C/W 1.1 TYP. MAX. 5.5 The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may results from its use, No license is granted by implication or otherwise under any patent or patent rights of TOSHIBA or others. The information contained herein is subject to change without prior notice. It is therefore advisable to contact TOSHIBA before proceeding with design of equipment incorporating this product. Rev. Aug. 2007 TIM1414-30L ABSOLUTE MAXIMUM RATINGS ( Ta= 25C ) CHARACTERISTICS SYMBOL UNIT RATING Drain-Source Voltage VDS V 15 Gate-Source Voltage VGS V -5 Drain Current IDS A 20 Total Power Dissipation (Tc= 25 C) PT W 136 Channel Temperature Tch C 175 Storage Tstg C -65 to +175 PACKAGE OUTLINE (7-AA03A) Unit in mm c Gate d Source e Drain HANDLING PRECAUTIONS FOR PACKAGE MODEL Soldering iron should be grounded and the operating time should not exceed 10 seconds at 260C. 2