L size 5.7 ±0.3mm
W size 5.0 ±0.3mm
T size 4.7 ±0.3mm
Size code in inch (mm) 2220 (5750)
When rated current is applied to the products, inductance will be within
±40% of initial inductance value.
When rated current is applied to the products, the temperature rise
caused by self-generated heat shall be limited to 40°C max.
Packaging
code Specifications Minimum quantity
Lφ180mm Embossed taping 350
Kφ330mm Embossed taping 1500
Mass (Typ.)
1 piece 0.48g
Inductance 2200µH ±20%
Inductance test frequency 10kHz
Rated current (Itemp) (Based on Temperature rise) 0.10A
Max. of DC resistance 30.1Ω
Avg. of DC resistance 21.5Ω±40%
Self resonance frequency (min.) 1.2MHz
Operating temperature range (Self-temperature rise is not included) -40℃ to 80℃
Class of magnetic shield No Shield
Series LQH55DN_03
LQH55DN222M03# “#” indicates a package specification code.
< List of part numbers with package codes >
LQH55DN222M03L , LQH55DN222M03K
Shape Notes
References
Specifications
Last updated: 2019/03/16
1 of 2
1.This datasheet is downloaded from the website of Murata Manufacturing Co., Ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued
without advance notice. Please check with our sales representatives or product engineers before ordering.
2.This datasheet has only typical specifications because there is no space for detailed specifications.
Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
URL : https://www.murata.com/
Inductance-Current characteristics (Typ.) Impedance-Frequency characteristics (Typ.)
Chart of characteristic data (The charts below may show another part number which shares its characteristics.)
Last updated: 2019/03/16
2 of 2
1.This datasheet is downloaded from the website of Murata Manufacturing Co., Ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued
without advance notice. Please check with our sales representatives or product engineers before ordering.
2.This datasheet has only typical specifications because there is no space for detailed specifications.
Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
