S301RE657R2R7W - Kemet - Product.Network

1© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com S6001_S301 • 3/7/2014

One world. One KEMET

Benets

• Weldable screw terminals

• Highest power performance available

• High power

• High rate cycling

• Long life

• Operatingtemperaturerangeof-40˚Cto+65˚C

• High cycle life > 1,000,000 cycles

• RoHS Compliant

• Made in USA

Overview

KEMET S301 Series Supercapacitors utilize a proprietary

electrode design to deliver a very high power density. This

product features high power performance up to 3,000 F capacity

in a weldable axial screw termination cell.

Applications

Typical applications include automotive subsystems, engine

starting, rail systems, hybrid drive trains, material handling/utility

vehicles, regenerative brake energy capture, backup power,

grid/power correction, and UPS/carry through power.

Screw Terminal Supercapacitors

S301 Series, Screw Termination, 2.7 V, 65ºC

Part Number System

S301 RV 308 T2R7 W

Series Size Code (D x L) Capacitance Code (µF) Capacitance

Tolerance

Rated Voltage

(VDC)

Termination Code

Supercapacitor,

Screw Termination

RE = 60.5 x 57.5

RP = 60.5 x 80.5

RS = 60.5 x 108.5

RV = 60.5 x 144

Firsttwodigitsrepresentsignicantgures.

Thirddigitspeciesnumberofzeros.

R = -0% 2R7 = 2.7 2 threaded inserts per end,

20 mm lead spacing, M6

2© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com S6001_S301 • 3/7/2014

Screw Terminal Supercapacitors – S301 Series, Screw Termination, 2.7 V, 65ºC

Dimensions – Millimeters

LLNeg

LLPos

Negative Mark

M6 X 1.0 7.5

2° Draft

Safety Vent

Part Number D L L2 SS1 LLNeg LLPos

Nominal

Tolerance

Nominal

Tolerance

Nominal Tolerance Nominal Tolerance Nominal

Tolerance

Nominal Tolerance Nominal Tolerance

S301RE657R2R7W 60.7 +/-0.3 57. 5 +/-0.5 49.8 +/-0.5 20 +/-0.2 32.1 +/-0.1 4.6 +/-0.2 3.2 +/-0.1

S301RP128R2R7W 60.7 +/-0.3 80 +/-0.5 72.3 +/-0.5 20 +/-0.2 32.1 +/-0.1 4.6 +/-0.2 3.2 +/-0.1

S301RS208R2R7W 60.7 +/-0.3 108.5 +/-0.5 100.8 +/-0.5 20 +/-0.2 32.1 +/-0.1 4.6 +/-0.2 3.2 +/-0.1

S301RV308R2R7W 60.7 +/-0.3 144 +/-0.5 136.3 +/-0.5 20 +/-0.2 32.1 +/-0.1 4.6 +/-0.2 3.2 +/-0.1

Performance Characteristics

Item Performance Characteristics

Rated Voltage 2.7 VDC

Surge Voltage 2.85 VDC

Capacitance Range 650 – 3,000 F

Capacitance Tolerance -0%

Temperature Range -40°Cto+65°C

Storage Temperature Range -40°Cto+70°C

Life, DC

10 years, rated voltage, 25°C

ΔC<20%decrease,ESR<100%increase

Life, Endurance

1,000 hours, rated voltage, 65°C

ΔC<20%decrease,ESR<100%increase

Life, Shelf

1,000 hours, no voltage, 70°C

ΔC<20%decrease,ESR<100%increase

Life, Cycle

> 1,000,000 cycles, rated to half rated voltage, 25°C

ΔC<20%decrease,ESR<100%increase

Standards Compliance RoHS, UL810a, BS EN 60068-2-14, Chinese RoHS, CE SAE

3© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com S6001_S301 • 3/7/2014

Screw Terminal Supercapacitors – S301 Series, Screw Termination, 2.7 V, 65ºC

Approvals

Series / Partnumber Test Type Test Standard

Date completed

(or estimated)

S301RP128R2R7W

S301RV308R2R7W

Vibration

IEC 60068-2-6

May 2013

SAE J2380

ISO 16750-3

Mechanical shock IEC 60068-2-27

Underwriters Laboratory UL-810A 2 by Part number

SAE Safety And Abuse SAE J24645 3 pending 12/31/2013

S301RE657R2R7W

S301RS208R2R7W

pending 1

1 Pending Part Numbers require signicant production runs and UL Certication

2 UL-810A includes the following tests: Short Circuit, Abnormal Charge, Heating, Crush, Impact, Shock, Vibration

3 SAE J2464 Includes the following tests: Nail Penetration, Crush, Thermal Stability, Thermal Shock, Short Ciruit, Overcharge, Forced Vent

Environmental Compliance

All KEMET supercapacitors are RoHS Compliant.

4© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com S6001_S301 • 3/7/2014

Screw Terminal Supercapacitors – S301 Series, Screw Termination, 2.7 V, 65ºC

Table 1 – Ratings & Part Number Reference

Part Number S301RE657R2R7W1S301RP128R2R7W S301RS208R2R7W S301RV308R2R7W

Electrical

Capacitance (F) 650 1200 2000 3000

Capacitance Tolerance -0 -0 -0 -0

Rated Voltage (V) 2.7 2.7 2.7 2.7

Surge Voltage (V) 2.85 2.85 2.85 2.85

ESR,DC≤(mΩ)[10ms] 0.32 0.3 0.27 0.26

ESR,AC1kHz≤(mΩ) 0.26 0.25 0.23 0.2

Inductance ±20 (nH) 60 60 60 60

72HourLeakage≤(mA) 1.5 225

Cycling

Current,Peak[1s](A) 750 1200 1800 2200

Continuous Current (A)* 65 90 130 145

Current, Short Circuit (A) 10,000 10,000 10,000 10,000

Thermal

Resistance, Thermal (°C/W) 6 5 3.5 4

Energy/Power

Maximum Stored Energy (Wh) 0.66 1.22 2.03 3.04

Energy Density (Wh/kg) 3.6 4.1 5.5 6

Energy Density (Wh/L) 4.4 6.2 6.5 7.7

Power Density (kW/kg) 30.8 20 18.2 13.7

Power Density (kW/L) 38.5 31 21.7 17.7

Maximum Power (kW/kg) 14.8 9.9 8.8 6.6

Physical

Size Code RE RP RS RV

D x L (mm) 60.7 x 57.5 60.7 x 80 60.7 x 108.5 60.7 x 144

Weight (kg) 0.185 0.29 0.37 0.51

Volume (L) 0.148 0.196 0.196 0.397

Volume of ACN (L) 0.05 0.093 0.24

Screw Threads M6X1 M6X1 M6X1 M6X1

Maximum Torque 5 Nm (44 Inch/Lbs) 5 Nm (44 Inch/Lbs) 5 Nm (44 Inch/Lbs) 5 Nm (44 Inch/Lbs)

*Rated current = continuous current with 20°C temperature rise.

5© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com S6001_S301 • 3/7/2014

Screw Terminal Supercapacitors – S301 Series, Screw Termination, 2.7 V, 65ºC

Mounting

Donotscratchorletheleadterminals.Theterminalsareplatedwithmetalandtheremovaloftheplatedmaterialwillcausepoor

solderability.

Do not overheat when soldering. Solder temperature lower than 260°C and time shorter than 5 seconds are recommended. For

hand soldering, tip temperature should be no higher than 350°C (662°F) for a maximum contact time of 3 seconds. Only the snap-in

terminals should come into contact with liquid solder or iron. Excessive heat on the snap-in terminal boards can cause damage to

seals, shrink sleeve, and electrodes resulting in shortened life or premature part failure.

Packaging Quantities

Part Number Capacitance

(F)

Rated

Voltage

Package

Type

Package

Quantity

Box

Weight

Box

Length

Box

Width

Box

Height

S301RE657R2R7W 650 2.7 30

S301RP128R2R7W 1200 2.7

Box with Cardboard

Separators

15 10.1 lbs (4.6 Kgs) 13.0" (330 mm) 8.0" (203 mm) 4.0" (102 mm)

S301RS208R2R7W 2000 2.7 15 15.0 lbs (6,8 Kgs) 13.0" (330 mm) 8.0" (203 mm) 4.0" (102 mm)

S301RV308R2R7W 3000 2.7 6 8 lbs (3.7 kgs) 9.0" (229 mm) 7.0" (178 mm) 6.5" (165 mm)

Standard Marking

• KEMET logo

• Rated capacitance

• Rated voltage

• Product number

• Negative terminal marking

• Energy in Wh

6© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com S6001_S301 • 3/7/2014

Screw Terminal Supercapacitors – S301 Series, Screw Termination, 2.7 V, 65ºC

KEMET Corporation

World Headquarters

2835 KEMET Way

Simpsonville, SC 29681

Mailing Address:

P.O. Box 5928

Greenville, SC 29606

www.kemet.com

Tel: 864-963-6300

Fax: 864-963-6521

Corporate Of ces

Fort Lauderdale, FL

Tel: 954-766-2800

North America

Southeast

Lake Mary, FL

Tel: 407-855-8886

Northeast

Wilmington, MA

Tel: 978-658-1663

Central

Novi, MI

Tel: 248-306-9353

West

Milpitas, CA

Tel: 408-433-9950

Mexico

Guadalajara, Jalisco

Tel: 52-33-3123-2141

Europe

Southern Europe

Paris, France

Tel: 33-1-4646-1006

Sasso Marconi, Italy

Tel: 39-051-939111

Central Europe

Landsberg, Germany

Tel: 49-8191-3350800

Kamen, Germany

Tel: 49-2307-438110

Northern Europe

Bishop’s Stortford, United Kingdom

Tel: 44-1279-460122

Espoo, Finland

Tel: 358-9-5406-5000

Asia

Northeast Asia

Hong Kong

Tel: 852-2305-1168

Shenzhen, China

Tel: 86-755-2518-1306

Beijing, China

Tel: 86-10-5829-1711

Shanghai, China

Tel: 86-21-6447-0707

Taipei, Taiwan

Tel: 886-2-27528585

Southeast Asia

Singapore

Tel: 65-6586-1900

Penang, Malaysia

Tel: 60-4-6430200

Bangalore, India

Tel: 91-806-53-76817

Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not

assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of

KEMET Electronics Corporation.

7© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com S6001_S301 • 3/7/2014

Screw Terminal Supercapacitors – S301 Series, Screw Termination, 2.7 V, 65ºC

Disclaimer

All product speciﬁ cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and

verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.

All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.

Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are

not intended to constitute – and KEMET speciﬁ cally disclaims – any warranty concerning suitability for a speciﬁ c customer application or use. The Information is intended for use only

by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise

provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained.

Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still

occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective

circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.

Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not

be required.

Prototype Sample Disclaimer

The Customer acknowledges the following limitations of the prototype samples:

(1) Prototype samples are manufactured from preliminary designs and manufacturing processes, may not represent nal designs, have not been released for

commercial use and are not subject to the same quality control procedures applicable to released products;

(2) Prototype samples are not qualied parts and are provided as-is by KEMET Electronics Corporation, which specically disclaims any and all warranties and

guarantees, explicit or implied, including without limitation the warranties of merchantability and tness for a particular purpose or use;

(3) Prototype samples are not intended for commercial use, are provided for engineering evaluation only and are not recommended for use in the Customer’s

production line; and

(4) The Customer assumes the risk of any and all uses that the Customer makes of the prototype samples.