MDP 01, 03, 05 Vishay Dale Thick Film Resistor Networks, Dual-In-Line, Molded DIP FEATURES * Isolated, bussed and dual terminator schematics available * 0.160" (4.06 mm) maximum seated height and rugged, molded case construction * Thick film resistive elements * Low temperature coefficient (- 55 C to + 125 C) 100 ppm/C * Reduces total assembly costs * Compatible with automatic inserting equipment * Wide resistance range (10 to 2.2 M) * Uniform performance characteristics * Available in tube pack * Compliant to RoHS directive 2002/95/EC STANDARD ELECTRICAL SPECIFICATIONS GLOBAL MODEL/ NO. OF PINS SCHEMATIC 01 03 05 01 03 05 MDP 14 MDP 16 POWER RATING ELEMENT (1) P70 C W 0.125 0.250 0.125 0.125 0.250 0.125 RESISTANCE RANGE TOLERANCE (3) % 10 to 2.2M 10 to 2.2M Consult factory 10 to 2.2M 10 to 2.2M Consult factory 1, 2, 5 1, 2, 5 TCR TEMPERATURE COEFFICIENT WEIGHT TRACKING (2) (- 55 C to + 125 C) (- 55 C to + 125 C) g ppm/C ppm/C 50 100 50 1.3 100 50 100 50 1.5 100 Notes (1) For resistor power ratings at + 25 C see derating curves (2) Tighter tracking available (3) 2 % standard, 1 % and 5 % available GLOBAL PART NUMBER INFORMATION New Global Part Numbering: MDP1403100RGD04 (preferred part numbering format) M GLOBAL MODEL MDP D P 1 4 0 3 1 0 0 R G D RESISTANCE TOLERANCE VALUE CODE F=1% 14 = 14 pin R= 01 = Bussed K = k G=2% 16 = 16 pin 03 = Isolated M = M J=5% 00 = Special 10R0 = 10 S = Special 680K = 680 k 1M00 = 1.0 M Historical Part Number example: MDP1403101G (will continue to be accepted) PIN COUNT 0 4 PACKAGING SPECIAL E04 = Lead (Pb)-free, tube D04 = Tin/lead, tube Blank = Standard (Dash Number) (Up to 3 digits) From 1 to 999 as applicable SCHEMATIC MDP 14 03 101 G D04 HISTORICAL MODEL PIN COUNT SCHEMATIC RESISTANCE VALUE TOLERANCE CODE PACKAGING New Global Part Numbering: MDP1405121CGD04 (preferred part numbering format) M GLOBAL MODEL MDP D P 1 4 0 5 1 2 1 C G RESISTANCE TOLERANCE VALUE CODE F=1% 14 = 14 pin 3 digit 05 = Dual impedance G=2% 16 = 16 pin terminator code, followed J=5% by alpha modifier (see Impedance Codes table) Historical Part Number example: MDP1405221271G (will continue to be accepted) PIN COUNT MDP HISTORICAL MODEL D PIN COUNT 4 PACKAGING SPECIAL E04 = Lead (Pb)-free, tube D04 = Tin/lead, tube Blank = Standard (Dash Number) (Up to 3 digits) From 1 to 999 as applicable SCHEMATIC 14 0 05 221 271 G D04 SCHEMATIC RESISTANCE VALUE 1 RESISTANCE VALUE 2 TOLERANCE CODE PACKAGING * Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: 31511 Revision: 07-Jun-10 For technical questions, contact: ff2aresistors@vishay.com www.vishay.com 1 MDP 01, 03, 05 Thick Film Resistor Networks, Dual-In-Line, Molded DIP Vishay Dale DIMENSIONS in inches (millimeters) 0.310 0.010 (7.87 0.254) 0.120 0.005 (3.05 0.127) A 0.010 (0.254) 0.250 0.005 (6.35 0.127) 0.030 (0.762) Typ. Pin #1 Identification 0.075 0.015 (1.90 0.381) Pin #1 0.100 0.010 (2.54 0.254) Non-Accumulative Tol. "C" Spaces GLOBAL MODEL B 0.010 (0.254) A 0.010 + 0.005 - 0.002 (0.254 + 0.127 - 0.051) 0.130 + 0.015 - 0.010 (3.30 + 0.381 - 0.254) 0.018 0.003 (0.457 0.076) 0.290 Min. 0.320 Nom. 0.360 Max. (7.37 Min. 8.13 Nom. 9.14 Max.) 0.050 0.005 (1.27 0.127) B C MDP 14 0.750 (19.05) 0.600 (15.24) 6 MDP 16 0.850 (21.59) 0.700 (17.78) 7 TECHNICAL SPECIFICATIONS PARAMETER UNIT MDP14 MDP16 Package Power Rating (Maximum at + 70 C) W 1.73 1.92 Voltage Coefficient of Resistance Veff Dielectric Strength < 50 ppm typical VAC 200 Insulation Resistance > 10 000M minimum Operating Temperature Range C - 55 to + 125 Storage Temperature Range C - 55 to + 150 MECHANICAL SPECIFICATIONS Marking Resistance to Solvents Permanency testing per MIL-STD-202, method 215 Solderability Per MIL-STD-202, method 208E Body Molded epoxy Terminals Solder plated leads Weight 14 pin = 1.3 g; 16 pin = 1.5 g IMPEDANCE CODES CODE R1 () R2 () CODE R1 () R2 () 500B 82 130 141A 270 270 750B 120 200 181A 330 390 800C 130 210 191A 330 470 990A 160 260 221B 330 680 101C 180 240 281B 560 560 111C 180 270 381B 560 1.2K 121B 180 390 501C 620 2.7K 121C 220 270 102A 1.5K 3.3K 131A 220 330 202B 3K 6.2K www.vishay.com 2 For technical questions, contact: ff2aresistors@vishay.com Document Number: 31511 Revision: 07-Jun-10 MDP 01, 03, 05 Power Rating (W) Thick Film Resistor Networks, Dual-In-Line, Molded DIP Vishay Dale 16 Pin Package 3.00 14 Pin Package 2.70 Single Resistor 03 0.380 01 and 05 0.190 - 50 Derating + 25 + 70 + 125 + 150 Ambient Temperature C CIRCUIT APPLICATIONS 01 SCHEMATIC 13 and 15 resistors with one pin common The MDPXX01 circuit provides a choice of 13 and 15 nominally equal resistors, each connected between a common pin (14 and 16) and a discrete PC board pin. Commonly used in the following applications: * MOS/ROM Pull-up/Pull-down * TTL Input Pull-down * Open Collector Pull-up * Digital Pulse Squaring * "Wired OR" Pull-up * TTL Unused Gate Pull-up * Power Driven Pull-up * High Speed Parallel Pull-up * * * * * * * * MDP1401 Pin #1 MDP1601 03 SCHEMATIC 7 and 8 isolated resistors The MDPXX03 provides a choice of 7 and 8 nominally equal resistors, each resistor isolated from all others and wired directly across. Commonly used in the following applications: * "Wired OR" Pull-up * Long-line Impedance Balancing * Power Driven Pull-up * LED Current Limiting * Powergate Pull-up * ECL Output Pull-down * Line Termination * TTL Input Pull-down MDP1403 Pin #1 MDP1603 05 SCHEMATIC TTL dual-line terminator; pulse squaring R1 R1 R2 R1 R2 R1 R2 R1 R2 Pin #1 R1 R2 R1 R2 R2 R1 R1 R1 R2 R2 R2 R2 R1 R1 R2 R1 R2 R1 R2 The MDPXX05 circuit contains 12 and 14 series pair of resistors. Each series pair is connected between ground and a common line. The junction of these resistor pairs is connected to the input terminals. The 05 circuits are designed for TTL dual-line termination and pulse squaring. MDP1405, MDP1605 Note * Standard E24 resistance values stocked. Consult factory. Document Number: 31511 Revision: 07-Jun-10 For technical questions, contact: ff2aresistors@vishay.com www.vishay.com 3 MDP 01, 03, 05 Vishay Dale Thick Film Resistor Networks, Dual-In-Line, Molded DIP PERFORMANCE CONDITIONS MAX. R (TYPICAL TEST LOTS) 1.5 rated power, applied 1.5 h "ON" and 0.5 h "OFF" for 100 h 4 h at + 25 C ambient temperature 0.50 % R 5 cycles between - 65 C and + 125 C 0.50 % R 2.5 x rated working voltage 5 s 0.25 % R 45 min at full rated working voltage at - 65 C 0.25 % R 240 h with humidity ranging from 80 % RH to 98 % RH 0.50 % R Leads immersed in + 350 C solder to within 1/16" of device body for 3 s 0.25 % R Total of 18 shocks at 100 g's 0.25 % R Vibration 12 h at maximum of 20 g's between 10 Hz and 2000 Hz 0.25 % R Load Life 1000 h at + 70 C, rated power applied 1.5 h "ON, 0.5 h "OFF" for full 1000 h period. Derated according to the curve. 1.00 % R Terminal Strength 4.5 pound pull for 30 s 0.25 % R Insulation Resistance 10 000 M (minimum) - No evidence of arcing or damage (200 VRMS for 1 min) - TEST Power Conditioning Thermal Shock Short Time Overload Low Temperature Operation Moisture Resistance Resistance to Soldering Heat Shock Dielectric Withstanding Voltage www.vishay.com 4 For technical questions, contact: ff2aresistors@vishay.com Document Number: 31511 Revision: 07-Jun-10 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1