Document Number: 31511 For technical questions, contact: ff2aresistors@vishay.com www.vishay.com
Revision: 07-Jun-10 1
Thick Film Resistor Networks, Dual-In-Line, Molded DIP
MDP 01, 03, 05
Vishay Dale
FEATURES
•Isolated, bussed and dual terminator
schematics available
•0.160" (4.06 mm) maximum seated height and
rugged, molded case construction
•Thick film resistive elements
•
Low temperature coefficient (- 55 °C to + 125 °C)
± 100 ppm/°C
•Reduces total assembly costs
•Compatible with automatic inserting
equipment
•Wide resistance range (10 Ω to 2.2 MΩ)
•Uniform performance characteristics
•Available in tube pack
•Compliant to RoHS directive 2002/95/EC
Notes
(1) For resistor power ratings at + 25 °C see derating curves
(2) Tighter tracking available
(3) ± 2 % standard, ± 1 % and ± 5 % available
* Pb containing terminations are not RoHS compliant, exemptions may apply
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL
MODEL/
NO. OF
PINS
SCHEMATIC
POWER RATING
ELEMENT (1)
P70 °C
W
RESISTANCE
RANGE
Ω
TOLERANCE (3)
± %
TEMPERATURE
COEFFICIENT
(- 55 °C to + 125 °C)
± ppm/°C
TCR
TRACKING (2)
(- 55 °C to + 125 °C)
± ppm/°C
WEIGHT
g
MDP 14
01
03
05
0.125
0.250
0.125
10 to 2.2M
10 to 2.2M
Consult factory
1, 2, 5 100
50
50
100
1.3
MDP 16
01
03
05
0.125
0.250
0.125
10 to 2.2M
10 to 2.2M
Consult factory
1, 2, 5 100
50
50
100
1.5
MDP E04 = Lead (Pb)-free, tube
New Global Part Numbering: MDP1403100RGD04 (preferred part numbering format)
Historical Part Number example: MDP1403101G (will continue to be accepted)
MDP14 0310 0RGD04
GLOBAL PART NUMBER INFORMATION
GLOBAL
MODEL PIN COUNT SCHEMATIC TOLERANCE
CODE SPECIAL
F = ± 1 %
G = ± 2 %
J = ± 5 %
S = Special
Blank = Standard
(Dash Number)
(Up to 3 digits)
From 1 to 999
as applicable
HISTORICAL
MODEL PIN COUNT SCHEMATIC RESISTANCE
VALUE
D04 = Tin/lead, tube
R = Ω
K = kΩ
M = MΩ
10R0 = 10 Ω
680K = 680 kΩ
1M00 = 1.0 MΩ
14 = 14 pin
16 = 16 pin
TOLERANCE
CODE PACKAGING
MDP 14 03 101 G D04
01 = Bussed
03 = Isolated
00 = Special
RESISTANCE
VALUE PACKAGING
MDP E04 = Lead (Pb)-free, tube
New Global Part Numbering: MDP1405121CGD04 (preferred part numbering format)
Historical Part Number example: MDP1405221271G (will continue to be accepted)
MDP14 0512 1CGD04
GLOBAL
MODEL PIN COUNT SCHEMATIC TOLERANCE
CODE SPECIAL
F = ± 1 %
G = ± 2 %
J = ± 5 %
Blank = Standard
(Dash Number)
(Up to 3 digits)
From 1 to 999
as applicable
HISTORICAL
MODEL PIN COUNT SCHEMATIC RESISTANCE
VALUE 1
D04 = Tin/lead, tube
14 = 14 pin
16 = 16 pin
MDP 14 05 221
05 = Dual
terminator
RESISTANCE
VALUE PACKAGING
3 digit
impedance
code, followed
by alpha modifier
(see Impedance
Codes table)
PACKAGING
D04
RESISTANCE
VALUE 2
TOLERANCE
CODE
271 G
MDP 01, 03, 05
Vishay Dale Thick Film Resistor Networks, Dual-In-Line, Molded DIP
www.vishay.com For technical questions, contact: ff2aresistors@vishay.com Document Number: 31511
2Revision: 07-Jun-10
DIMENSIONS in inches (millimeters)
0.010 + 0.005
- 0.002
(0.254 + 0.127
- 0.051)
0.250 ± 0.005
(6.35 ± 0.127)
0.310 ± 0.010
(7.87 ± 0.254)
0.290 Min.
0.320 Nom.
0.360 Max.
(7.37 Min.
8.13 Nom.
9.14 Max.)
Pin #1
Non-Accumulative Tol.
"C" Spaces
A± 0.010 (0.254)
0.030
(0.762) Typ.
0.100 ± 0.010
(2.54 ± 0.254)
0.075 ± 0.015
(1.90 ± 0.381)
0.120 ± 0.005
(3.05 ± 0.127)
0.130 + 0.015
- 0.010
(3.30 + 0.381
- 0.254)
0.050 ± 0.005
(1.27 ± 0.127)
0.018 ± 0.003
(0.457 ± 0.076)
B± 0.010 (0.254)
Pin #1
Identification
GLOBAL MODEL A B C
MDP 14 0.750 (19.05) 0.600 (15.24) 6
MDP 16 0.850 (21.59) 0.700 (17.78)7
TECHNICAL SPECIFICATIONS
PARAMETER UNIT MDP14 MDP16
Package Power Rating (Maximum at + 70 °C) W 1.73 1.92
Voltage Coefficient of Resistance Veff < 50 ppm typical
Dielectric Strength VAC 200
Insulation Resistance Ω> 10 000M minimum
Operating Temperature Range °C - 55 to + 125
Storage Temperature Range °C - 55 to + 150
MECHANICAL SPECIFICATIONS
Marking Resistance to Solvents Permanency testing per MIL-STD-202, method 215
Solderability Per MIL-STD-202, method 208E
Body Molded epoxy
Terminals Solder plated leads
Weight 14 pin = 1.3 g; 16 pin = 1.5 g
IMPEDANCE CODES
CODE R1 (Ω) R2 (Ω)CODE R1 (Ω) R2 (Ω)
500B 82 130 141A 270 270
750B 120 200 181A 330 390
800C 130 210 191A 330 470
990A 160 260 221B 330 680
101C 180240281B 560 560
111C 180270381B 560 1.2K
121B 180 390 501C 620 2.7K
121C 220 270 102A 1.5K 3.3K
131A 220 330 202B 3K 6.2K
Document Number: 31511 For technical questions, contact: ff2aresistors@vishay.com www.vishay.com
Revision: 07-Jun-10 3
MDP 01, 03, 05
Thick Film Resistor Networks, Dual-In-Line, Molded DIP Vishay Dale
Note
• Standard E24 resistance values stocked. Consult factory.
CIRCUIT APPLICATIONS
01 SCHEMATIC
13 and 15 resistors with one pin common
The MDPXX01 circuit provides a choice of 13 and 15 nominally equal
resistors, each connected between a common pin (14 and 16) and a
discrete PC board pin. Commonly used in the following applications:
• MOS/ROM Pull-up/Pull-down • TTL Input Pull-down
• Open Collector Pull-up • Digital Pulse Squaring
• "Wired OR" Pull-up • TTL Unused Gate Pull-up
• Power Driven Pull-up • High Speed Parallel Pull-up
03 SCHEMATIC
7 and 8 isolated resistors
The MDPXX03 provides a choice of 7 and 8 nominally equal resistors,
each resistor isolated from all others and wired directly across.
Commonly used in the following applications:
• "Wired OR" Pull-up • Long-line Impedance Balancing
• Power Driven Pull-up • LED Current Limiting
• Powergate Pull-up • ECL Output Pull-down
• Line Termination • TTL Input Pull-down
05 SCHEMATIC
TTL dual-line terminator; pulse squaring
The MDPXX05 circuit contains 12 and 14 series pair of resistors.
Each series pair is connected between ground and a common line.
The junction of these resistor pairs is connected to the input terminals.
The 05 circuits are designed for TTL dual-line termination and pulse
squaring.
•••••
•
••
Pin #1
MDP1401
MDP1601
MDP1603
MDP1403
Pin #1
MDP1405, MDP1605
Pin #1
R1 R1 R1 R1 R1 R1 R1
R2 R2 R2 R2 R2
R2R2
R1 R1 R1 R1 R1 R1 R1
R2R2R2 R2 R2 R2 R2
16 Pin Package
14 Pin Package
Single Resistor
03
01 and 05
3.00
2.70
0.380
0.190
- 50 + 25 + 70 + 125 + 150
DeratingAmbient Temperature C
Power Rating (W)
MDP 01, 03, 05
Vishay Dale Thick Film Resistor Networks, Dual-In-Line, Molded DIP
www.vishay.com For technical questions, contact: ff2aresistors@vishay.com Document Number: 31511
4Revision: 07-Jun-10
PERFORMANCE
TEST CONDITIONS MAX. ΔR
(TYPICAL TEST LOTS)
Power Conditioning 1.5 rated power, applied 1.5 h “ON” and 0.5 h “OFF” for 100 h
± 4 h at + 25 °C ambient temperature ± 0.50 % ΔR
Thermal Shock 5 cycles between - 65 °C and + 125 °C ± 0.50 % ΔR
Short Time Overload 2.5 x rated working voltage 5 s ± 0.25 % ΔR
Low Temperature Operation 45 min at full rated working voltage at - 65 °C ± 0.25 % ΔR
Moisture Resistance 240 h with humidity ranging from 80 % RH to 98 % RH ± 0.50 % ΔR
Resistance to Soldering Heat Leads immersed in + 350 °C solder to within 1/16" of device body for 3 s ± 0.25 % ΔR
Shock Total of 18 shocks at 100 g's ± 0.25 % ΔR
Vibration 12 h at maximum of 20 g's between 10 Hz and 2000 Hz ± 0.25 % ΔR
Load Life 1000 h at + 70 °C, rated power applied 1.5 h “ON, 0.5 h “OFF” for full 1000 h
period. Derated according to the curve. ± 1.00 % ΔR
Terminal Strength 4.5 pound pull for 30 s ± 0.25 % ΔR
Insulation Resistance 10 000 MΩ (minimum) -
Dielectric Withstanding Voltage No evidence of arcing or damage (200 VRMS for 1 min) -
Document Number: 91000 www.vishay.com
Revision: 18-Jul-08 1
Disclaimer
Legal Disclaimer Notice
Vishay
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
