HARTING Ha-VIS eCon Switches Ha-VIS eCon 3000 Fast Ethernet Basic PoE / PoE+ 24 V DC/DC 5 to 8 Ethernet Ports RJ45, SC and PoE/PoE+ with 24 V DC/DC converter Unmanaged Plug & Play Ethernet switches for DIN rail assembly in control cabinets Commercial Temp.: 0 C ... +55 C / Industrial Temp.: -40 C ... +70 C Energy Efficient Ethernet Use of PoE+ with 24 V DC supply (isolated) Energy supply of up to 4 terminal devices via PoE+ (137 watts) according to IEEE 802.3at Fast Ethernet Non-Blocking Switch architecture according to IEEE 802.3 Variants with industrial temperature range of -40C ... +70 C Surge protection and reverse polarity protection Minimum energy consumption due to Energy-Efficient Ethernet Optimised DIN rail bracket Target markets Machinery & Robotics Automation technology Industrial network infrastructures Wind Energy Solar Energy Transportation Shipbuilding General description The Ha-VIS eCon 3000 Fast Ethernet PoE DC/DC family of unmanaged Ethernet switches is equipped with up to 8 Fast Ethernet ports and allow for cost-efficient and quick expansion and/or reconstruction of network infrastructures. The switches work as power sourcing equipment (PSE) and are capable of simultaneously providing the full PoE output of 34.2 watts on up to four ports. Exceeding the PoE+ standard, the switches are equipped with an integrated, galvanically isolated DC/DC voltage transformer. The switches can be supplied with 24 VDC instead of the usually required 54 VDC. The selection includes various combinations of variants with RJ45 and fibre optic ports. Automatic detection of the transmission rate (autonegotiation) and of the wiring of the twisted pair data cable (autopolarity and auto-MDI(X)) allow for simple plug & play. All variants are available with the temperature ranges Industrial" and Commercial". Technical characteristics Switch Features Ethernet Ports 10BASE-Te / 100BASE-TX Enclosures width 60 mm Number of ports 5, 6, 7, 8 Connection type Auto-negotiation RJ45 Yes Yes Switching technology Store and Forward Auto-polarity Supported standards IEEE 802.3 Auto-MDI(X) Frame Size 1522 bytes MAC table size Packet buffer size Transfer conditions 1k entries 448 kbit Transfer speed Transfer length Non-blocking Yes Quality of service Yes Energy-Efficient Ethernet Yes PROFINET compatible Yes EthernetIP compatible Yes Voltage supply Nominal voltage Permissible voltage range Surge protection Reverse polarity proof Starting current Overcurrent protection at input Max. power consumption @ 24 VDC Cross-section / Wire gauge Connection type Pinout Supply circuit (acc. to 60950) 24 VDC 18 VDC ... 60 VDC Yes Yes 1.60 A Yes (10 A) 138.5 W ... 140.2 W 0.08 mm ... 2.5 mm (28 AWG ... 12 AWG) 3-pole, pluggable screwed contact +/-/ SELV (circuit breaker 10 A) HARTING Technology Group P.O.Box 1473, D-32325 Espelkamp Wilhelm-Harting-Strae 1, D-32325 Espelkamp, Germany ICPN-Service@harting.com | Service hotline: +49 5772 47-9479 Fax: +49 5772 47-495 | www.HARTING.com/de/ethernet-switches Yes Twisted Pair 10 / 100 Mbit/s 100 m (twisted pair, Cat 5) Ethernet Ports100BASE-FX Type of fibre Multimode (MM) Singlemode (SM) Connection type SC Duplex Transfer conditions Wavelength Transfer speed Transfer length FO 1310 nm 100 Mbit/s Output power Input sensitivity 2 km 15 km -20 dBm ... -14 dBm -15 dBm ... -8 dBm -30 dBm -32 dBm Ambient conditions Commercial temperature range Industrial temperature range Storage temperature range Relative humidity (operation) Relative humidity (storage and transport) Air pressure (operation) 0 C ... +55 C -40 C ... +70 C -40 C ... +85 C 0 % ... 95 % (not-condensing) 0 % ... 95 % (not-condensing) 2000 m (795 hPa) Note: We reserve the right to make technical changes to the products and to the content of this document at any time without prior notification. The HARTING Technologiegruppe does not accept any responsibility for possible errors or incompletions in this document. We reserve all the rights to this document and the topics and illustrations contained within it. Copying, disclosure to third parties or use of its content - even partially - is forbidden without the prior written consent of the HARTING Technologiegruppe. PoE PoE Number of PoE ports PoE+ 4 Standard IEEE 802.3af / IEEE 802.3at PoE type PSE Supported mode Supply voltage PSE Max. current consumption PSE Max. current Alternative A 24 VDC Supported cabling 2,6 A 5,7 A 375 mA 638 mA 15.4 W per port 34.2 W per port 61.6 W total 136.8 W total See 802.3at, section 33.1.4 PoE pinout Alternative A, MDI-X (1/2 = V-, 3/6 = V+) Maximum output power PSE Enclosures Enclosures width Dimensions H x W x D (without pluggable screw contact and holding bracket) Weight Type of installation Material enclosures 60 mm 142 mm x 60 mm x 107.5 mm 838 g ... 866 g 35 mm DIN rail acc. to EN 60 715 Anodised aluminium / Powder-coated steel sheet Protection degree (withplugged screw contact) Protection class IP30 III Approvals CE, FCC CFR 47 Part 15, cUL US 508 listed, ABB IIT ECE - Approval mark (E1): see table technical characteristics Status- und Diagnose-Anzeigen Power (Pwr") lights up green Link/Activity (L/A") off Link/Activity (L/A") lights up green Link/Activity (L/A") flashes green Link speed (Spd") off Link speed (Spd") lights up yellow Supply voltage is applied No link Link is active Link is active and data is transferred 10 Mbit/s 100 Mbit/s PoE status off PoE status lights up blue Voltage in PoE+ range PoE status lights up red Error PoE is inactive / low voltage EMC and environmental conditions EMC Interference immunity (EN 61000-6-1, 61 000-6-2 55024) Electrostatic discharge (ESD) EN 61 000-4-2 Electromagnetic field EN 61 000-4-3 Rapid transients (burst) EN 61 000-4-4 Surge voltages EN 61 000-4-5 Conducted interference voltages EN 61 000-4-6 EMC Interference emission (EN 61000-6-4, EN 55 032, FCC CFR 47 Part 15) Mechanical stability (EN 60721-3) IEC 60068-2-6 Vibration IEC 60068-2-6 Vibration resonance search IEC 60068-2-27 Shock test Included in delivery Pluggable screw contact for voltage supply Assembly instruction Drawings Technical characteristics / order information Ports / order information Commercial Temp.: 0 C ... +55 C Industrial Temp.: -40 C ... +70 C Enclosures width Current consumption@ 24 VDC with PoE MTBF in Mio. h Switch 1x MM (2 km) 60 mm 5.81 0.82 Ha-VIS eCon 3041B-AD-PP 24 03 104 1130 Ha-VIS eCon 3041BT-AD-PP 24 03 104 1120 1x SM (15 km) 60 mm 5.81 0.82 Ha-VIS eCon 3041B-AF-PP 24 03 104 1230 Ha-VIS eCon 3041BT-AF-PP 24 03 104 1220 2x MM (2 km) 60 mm 5.84 0.81 Ha-VIS eCon 3042B-AD-PP 24 03 104 2130 Ha-VIS eCon 3042BT-AD-PP 24 03 104 2120 - 2x SM (15 km) 60 mm 5.84 0.81 Ha-VIS eCon 3042B-AF-PP 24 03 104 2230 Ha-VIS eCon 3042BT-AF-PP - - 60 mm 5.77 0.85 Ha-VIS eCon 3060B-A-PP 24 03 106 00301 Ha-VIS eCon 3060BT-A-PP - 1x MM (2 km) 60 mm 5.82 0.80 Ha-VIS eCon 3061B-AD-PP 24 03 106 1130 Ha-VIS eCon 3061BT-AD-PP 24 03 106 1120 - 1x SM (15 km) 60 mm 5.82 0.80 Ha-VIS eCon 3061B-AF-PP 24 03 106 1230 Ha-VIS eCon 3061BT-AF-PP 24 03 106 1220 - - 60 mm 5.78 0.83 Ha-VIS eCon 3080B-A-PP 24 03 108 00301 Ha-VIS eCon 3080BT-A-PP RJ45 SFP 4 - 4 - 4 - 4 6 6 6 8 SC 1 E1 Approval Copyright(c) 2014 HARTING Technology Group Date of issue 06.2018 All rights reserved ICPN Datasheet 0846/03 Part no. Switch Part no. 24 03 104 2220 24 03 106 00201 24 03 108 00201