AGNW Series Control Stations IP65 Waterproof Aluminum Control Stations for o22 mm Switches/Pilot Lights AGAW control stations are designed for mounting IDEC o22 mm (7/8 inch) switches/pilot lights. **Various control stations are available from one to four holes with most widely used combinations of switches/pilot lights (contact configurations, voltage, button colors, and nameplates). **Enclosures only are also available, in which specifically selected TW series can be installed. 200 mm Ideal for small control boxes AGAW Control Box with four o22 mm switches/pilot lights AGA Control Box with three o30 mm switches/pilot lights **HW series can also be installed. Specifications Degree of Protection (Note) Material (Box) Coating Color (Melamine coating) Rated Insulation Voltage Insulation Resistance Common IP65 (IEC60529) (Key selector switch: Splash-proof IP54) Aluminum alloy die-cast Minimum applicable load (reference) = 3V AC/DC, 5mA (the applicable range is subject to change according to the operating conditions) Switch/Pilot Light Mounting Holes Yellow semi-gloss (Munsell 5Y7/1, outside only) The holes for mounting switches/pilot lights are 22.2 mm in diameter with an anti-rotation notch. Mounting centers are 50 mm on 2- and 3-hole enclosures, and 36 mm on 4-hole enclosures. 600V 5 M minimum Waterproof Bushing Between live and dead parts: 2500V AC, 1 minute Ambient temperature: -25 to +50C (no freezing) Relative humidity: 45 to 85% (no condensation) Wall mount (1 to 4 holes) Pole mount (1 to 4 holes) Entrance hub 1 to 3 holes: HNA22 G3/4 (22 mm) 4 to 5 holes: HNA33 G1 (28 mm) Dielectric Strength Standard Operating Conditions Style Cable Lead-in (Wall Mount) Applicable Switches/Pilot Lights Four plastic bushings are provided inside the corners for mounting screws to secure the control station on a panel surface. Lead-in Fittings (Wall Mount) An entrance hub made of aluminum is supplied for connecting a steel conduit to lead in cables. 1 to 3 holes: With HNA22 G3/4 for 22 mm conduit 4 holes: With HNA33 G1 for 28 mm conduit HNAG gland hubs for lead in cables are also available. IDEC o22 mm TW series Stand Pole (Pole Mount) Note: The degree of protection depends on the switches/pilot lights mounted in the enclosure. When IP65 switches/pilot lights are mounted, the entire control station has IP65 characteristics. (See page 2) The pole is made of carbon steel pipe, and the base is made of cast iron. The coating color is the same as the enclosure, yellow (semi-gloss). Contact Ratings (Contact Block) Contact Block Rated Insulation Voltage Rated Thermal Current Contact Ratings by Utilization Category IEC60947-5-1 Enclosure 600V 10A AC-15 (A600) DC-13 Switch/Pilot Light Operational Voltage and Current by Utilization Category Operational Current Operational Voltage AC-12 Control of resistive loads and solid state loads AC (50/60Hz) AC-15 Control of electromagnetic loads (>72VA) DC-12 Control of resistive loads and solid state loads DC DC-13 Control of electromagnets 8 24V 48V 50V 110V 220V 440V 10A -- 10A 10A 6A 2A 10A -- 7A 5A 3A 1A 8A 4A -- 2.2A 1.1A -- 4A 2A -- 1.1A 0.6A Unit Mounting Hole Pole Stainless Steel Screws -- Entrance Hub Waterproof Bushing Base AGNW Series Control Stations Control Stations with Switches/Pilot Lights Control Station The control stations are available with a selected combination of switches/pilot lights as listed below. For the dimensions and mounting centers, see the figures on page 10. Switch/Pilot Light Pushbutton PB Pilot Light PL (LED) Selector Switch SS Part No. ABW110 * ABW101 * ABW111 * ABW411 * APW116D * APW126D * ASW211 ASW320 ASW2K11 Specifications Flush, 1NO Flush, 1NC Flush, 1NO-1NC o40 mushroom, 1NO-1NC Round flush, 100/110V AC Round flush, 200/220V AC Knob, 2-position, 1NO-1NC Knob, 3-position, 2NO Key, 2-position, 1NO-1NC Note: Specify a button or lens color code in place of * : Pushbutton: B (black), G (green), R (red) Pilot Light: G (green), R (red), W (white) Control Stations Part No. Part No. AGAW2108Y AGAW2109Y * Wall Mount 2 holes AGAW2110Y * AGAW2113Y Pole Mount 2 holes AGAW2101SY Symbol PL SS PL SS PL SS PB PB PB PB Symbol Mounted Switches/Pilot Lights NWA Nameplate Part No. Legend PL AGAW3102Y PB PB Wall Mount 1 hole AGAW1101Y PB ABW110B ON AGAW1102Y PB ABW411R Without nameplate AGAW1105Y SS ASW211 HAND-AUTO AGAW1107Y * SS ASW2K11 OFF-ON Wall Mount 3 holes PL AGAW3103Y PB PB PB AGAW3104Y PB SS AGAW1101SY PB ABW110B ON PL Pole Mount 1 hole AGAW3102SY AGAW1102SY AGAW2101Y AGAW2102Y AGAW2103Y Wall Mount 2 holes AGAW2104Y AGAW2105Y AGAW2106Y AGAW2107Y Mounted Switches/Pilot Lights NWA Nameplate Part No. Legend APW126DR ASW211 Without nameplate HAND-AUTO APW116DR ASW2K11 Without nameplate OFF-ON APW126DR ASW2K11 Without nameplate OFF-ON ABW110B ABW411R ON Without nameplate ABW110B ABW101R ON OFF APW116DR ABW110B ABW101R Without nameplate ON OFF APW126DR ABW110B ABW101R Without nameplate ON OFF Package Quantity: 1 Control Station Style Style PB PB ABW411R OFF PB ABW110B ABW101R ON OFF AGAW3104SY ABW111B ABW111R ON OFF Wall Mount AGAW4101Y PB PB PB PL PL PL PL PL PB PL PB PL SS APW116DR APW116DG Without nameplate APW126DR APW126DG Without nameplate APW116DR ABW111DR Without nameplate STOP APW126DR ABW111R Without nameplate STOP APW116DR ASW211 Without nameplate HAND-AUTO PB ABW111B ABW111R ASW211 APW116DR ABW110B ABW101R ON OFF HAND-AUTO Without nameplate ON OFF Pole Mount 3 holes PB PB SS Wall * Pole 4 holes Pole Mount AGAW4101SY Wall Mount AGAW4102Y Pole Mount AGAW4102SY PL PL PB PB PL PB PB SS ABW111B ABW111R ASW211 ON OFF HAND-AUTO APW126DR APW126DG ABW111B ABW111R Without nameplate Without nameplate ON OFF APW126DR ABW111B ABW111R ASW211 Without nameplate ON OFF HAND-AUTO Degree of protection marked with * is splash-proof IP54. Degree of protection marked with * is splash-proof IP54. 9 AGNW Series Control Stations Style Package Quantity: 1 Part No. AGAW211Y Unit Mounting Hole Switch/Pilot Light Mounting Centers With All dimensions in mm. AGAW Control Station (Wall Mount) (132) 30max. (95) 86 1 hole (approx. 0.6 kg) Shade 60 (Centers) 82 4-o4.4 Mounting holes Hub HNA22 G3/4 (22mm) ON AGAW212Y I L 27 Without (72) NP AGA210Y With NP 23 2 holes (approx. 0.6 kg) Dimensions (1.2) Empty Enclosures Hub HNA22 G3/4 (22mm) OFF 2 50 With 3 holes (approx. 0.7 kg) AGAW314Y With NP 50 50 50 AGAW514Y With NP With 50 48 50 50 2 KGNW515Y 5 holes (approx. 0.9 kg) KGN510Y Switch/Pilot Light Mounting Hole NP L l Weight (Approx.) 2 holes 3 holes 212Y 313Y 314Y 514Y 150 114 200 164 200 164 300 264 5 holes 515Y (510Y) 300 264 0.6 kg 0.6 kg 0.7 kg 0.7 kg 0.9 kg 0.9 kg 3 holes 4 holes 1400 200 4 holes 1500 300 5 holes 1500 300 6.2 kg 6.4 kg 6.4 kg (95) 86 Shade (132) 82 (72) .2 4 holes AGAW Control Station (Pole Mount) Effective Depth inside the Enclosure 70 L o22 M4 grounding terminal 1 hole 211Y (210Y) 150 114 3.5 3.5 .2 o22 Without 30 **Entrance Hub (attached) 1 to 3 holes: HNA22 G3/4 (22 mm) 4 holes: HNA33 G1 (28 mm) **Gland hubs for leading in cables are also available. See page 39 for details. Applicable Cable Part No. Diameter (R) HNG21 8, 10, 12 HNAG22 13, 15, 17 HNAG33 18, 20, 22 (1.2) Hub HNA22 G3/4 ( 22mm) 48 36 Without Hub HNA33 G1 (28mm) 4 holes (approx. 0.9 kg) Hub NP AGA310Y 4 holes (approx. 0.7 kg) HNA22: 31 HNA33: 35 Nameplate AGAW313Y 24 An entrance hub is supplied. 1 to 3 holes:With HNA22 G3/4 for 22 mm conduit 4 holes:With HNA33 G1 for 28 mm conduit 79 77 Standard H 24 10 100 M6 Grounding terminal o230 o200 4-o14 Mounting hole 1 hole H L Weight (Approx.) 10 2 holes 1350 150 6.1 kg AGNW Series Control Stations Accessory (Options) Package Quantity: 1 Name & Shape Part No. Description & Dimensions **Protection for switches/pilot lights against direct sunlight and falling objects. **Color: Yellow (semi-gloss) **Shade mounting hole Enclosure Shade 95 46.5 70 132 AGZ-S1Y 2-M4 tapped hole: Depth 5 Pilot hole: Depth 5.5 max. (no penetration) 68 Material: Carbon steel plate Thickness: 1 mm Weight: Approx. 0.25 kg **For replacement of the base and pole. **Color: Yellow (semi-gloss) Stand Pole 4- o6 .5 72 50 Ho 51 65 le 2 (8 to 9) 94 2 1 o5 Stand gasket Sealing base Pole Outside Dia.: o48.6 Inside Dia.: o44.0 Base Grounding terminal (8 to 9) 10 4-o14 Hole 100 (1005) (1199) AGZ-S205 o230 Weight: Approx. 5.6 kg o200 All dimensions in mm. Instructions Ordering Information Precautions for Mounting on Panel (Wall) When ordering control stations with switches/pilot lights: 1. Insert M4 screws into the waterproof bushings at all four corners inside the box. Push the screws with a screwdriver and penetrate the bushings (Figure 1). 2. Thrust the screws into panel holes and secure the screws with nuts (Figure 2). Waterproof characteristics are not affected by piecing the bushings with screws. Specify the Part No. of the control station. Box Waterproof Bushing Figure 1 13 When ordering enclosures without switches/pilot lights: Specify the following items. 1. Part No. of the enclosure 2. Part No. and specifications of the switches/pilot lights to be mounted (lens color, button color, etc.) 3. Nameplate 4. Lead-in fitting Only when ordering the gland hub for leading in cables, specify the Part No. and the finished cable outside diameter (R). 5. Other specifications Ordering Example Panel surface Figure 2 Part No. of Enclosure Switch/Pilot Light and Nameplate Lead-in Fitting AGAW313Y APW126DR ABW210G, with NWA-1 ABW201R, with NWA-2 HNAG22 R15 Note: Any o22 mm TW/HW series are selectable. Take into consideration the degree of protection of the switches/pilot light and the effective depth of the enclosure. 11