https://www.phoenixcontact.com/us/products/2702534
06/26/2021Page3/8
Wireless module-FL WLAN 1100-2702534
Technical data
Antenna
Note on the connection method MIMO
Gain 5 dBi
Ethernet interface
Interface Ethernet (RJ45)
Number of interfaces 1
Connection method RJ45
Note on the connection method Auto negotiation and autocrossing
Transmission speed 10/100 Mbps
Transmission physics Copper
Transmission length 100 m (per segment)
Power supply for module electronics
Connection technology COMBICON
Connection method Push-in spring connection
Designation 1966101 FMC 1,5/ 3-STF-3,5
Number of positions 3
Cross section range AWG 24 ... 16 (Use copper wires rated 75° C (UL))
Note on the connection method Recommended conductor cross section: 0.75 mm²
Recommended ferrule: connection length 10 mm
Recommended crimping pliers: trapezoidal or square
Supply voltage 24 VDC (SELV)
Supply voltage range 18 VDC ... 32 VDC (PELV/SELV)
9 VDC ... 32 VDC (PELV/SELV (as of HW version 05))
Supply current typ. 120 mA (at 24 V DC)
Current consumption max. 250 mA (at 18 V DC)
max. 400 mA (at 9 V DC)
Connection data
Designation 1966101 FMC 1,5/ 3-STF-3,5
Connection method Push-in spring connection
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 1.5 mm²
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 1.5 mm²
Conductor cross section AWG min. 24
Conductor cross section AWG max. 16
Stripping length 10 mm