APT5010B2FLL APT5010LFLL 500V 46A 0.100W POWER MOS 7TM FREDFET Power MOS 7TM is a new generation of low loss, high voltage, N-Channel enhancement mode power MOSFETS. Both conduction and switching losses are addressed with Power MOS 7TM by significantly lowering RDS(ON) and Qg. Power MOS 7TM combines lower conduction and switching losses along with exceptionally fast switching speeds inherent with APT's patented metal gate structure. * Lower Input Capacitance * Increased Power Dissipation * Lower Miller Capacitance * Easier To Drive * Lower Gate Charge, Qg * Popular T-MAXTM or TO-264 Package * FAST RECOVERY BODY DIODE MAXIMUM RATINGS Symbol VDSS ID B2FLL T-MAXTM TO-264 LFLL D G S All Ratings: TC = 25C unless otherwise specified. Parameter APT5010 UNIT 500 Volts Drain-Source Voltage L A C I N H C N E T IO E T C MA N A OR V AD INF 46 Continuous Drain Current @ TC = 25C 1 Amps IDM Pulsed Drain Current VGS Gate-Source Voltage Continuous 30 Gate-Source Voltage Transient 40 Total Power Dissipation @ TC = 25C 500 Watts Linear Derating Factor 4.0 W/C VGSM PD TJ,TSTG 184 -55 to 150 Operating and Storage Junction Temperature Range TL Lead Temperature: 0.063" from Case for 10 Sec. IAR Avalanche Current EAR Repetitive Avalanche Energy EAS Single Pulse Avalanche Energy 1 Volts C 300 46 (Repetitive and Non-Repetitive) 1 Amps 50 4 mJ 1800 STATIC ELECTRICAL CHARACTERISTICS BVDSS ID(on) RDS(on) IDSS IGSS VGS(th) Characteristic / Test Conditions MIN Drain-Source Breakdown Voltage (VGS = 0V, ID = 250A) 500 Volts 46 Amps On State Drain Current 2 (VDS > ID(on) x R DS(on) Max, VGS = 10V) Drain-Source On-State Resistance 2 (VGS = 10V, 0.5 ID[Cont.]) TYP MAX 0.100 Zero Gate Voltage Drain Current (VDS = VDSS, VGS = 0V) 250 UNIT Ohms A Zero Gate Voltage Drain Current (VDS = 0.8 VDSS, VGS = 0V, TC = 125C) 1000 Gate-Source Leakage Current (VGS = 30V, VDS = 0V) 100 nA 5 Volts Gate Threshold Voltage (VDS = VGS, ID = 2.5mA) 3 CAUTION: These Devices are Sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed. APT Website - http://www.advancedpower.com USA 405 S.W. Columbia Street Bend, Oregon 97702-1035 Phone: (541) 382-8028 FAX: (541) 388-0364 EUROPE Chemin de Magret F-33700 Merignac - France Phone: (33) 5 57 92 15 15 FAX: (33) 5 56 47 97 61 050-7028 Rev- 4-2001 Symbol APT5010 B2FLL - LFLL DYNAMIC CHARACTERISTICS Symbol Characteristic Test Conditions MIN TYP Ciss Input Capacitance VGS = 0V 4105 Coss Output Capacitance VDS = 25V 824 Crss Reverse Transfer Capacitance f = 1 MHz 47 VGS = 10V 92 VDD = 0.5 VDSS ID = ID [Cont.] @ 25C 22 40 VGS = 15V 12 VDD = 0.5 VDSS 9 ID = ID [Cont.] @ 25C 30 RG = 0.6W 5 Qg Total Gate Charge 3 Gate-Source Charge Qgd Gate-Drain ("Miller ") Charge tr t d(off) tf Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time UNIT pF L A C I N H C N E T O I E T C MA N A OR V AD INF Qgs t d(on) MAX nC ns SOURCE-DRAIN DIODE RATINGS AND CHARACTERISTICS Symbol IS Characteristic / Test Conditions TYP Continuous Source Current (Body Diode) ISM Pulsed Source Current 1 VSD Diode Forward Voltage 2 dv/ Peak Diode Recovery dv/dt dt MIN (Body Diode) (VGS = 0V, IS = -ID [Cont.]) 5 MAX 46 184 UNIT Amps 1.3 Volts 5 V/ns t rr Reverse Recovery Time (IS = -ID [Cont.], di/dt = 100A/s) Tj = 25C 250 Tj = 125C 500 Q rr Reverse Recovery Charge (IS = -ID [Cont.], di/dt = 100A/s) Tj = 25C 1.6 Tj = 125C 5.5 IRRM Peak Recovery Current (IS = -ID [Cont.], di/dt = 100A/s) Tj = 25C 15 Tj = 125C 27 ns C Amps THERMAL CHARACTERISTICS Symbol Characteristic MIN TYP MAX Junction to Case RqJA Junction to Ambient 40 1 Repetitive Rating: Pulse width limited by maximum junction 3 See MIL-STD-750 Method 3471 4 Starting T = +25C, L = 1.70mH, R = 25W, Peak I = 46A j G L temperature. 2 Pulse Test: Pulse width < 380 S, Duty Cycle < 2% APT Reserves the right to change, without notice, the specifications and information contained herein. T-MAXTM (B2) Package Outline 4.69 (.185) 5.31 (.209) 1.49 (.059) 2.49 (.098) TO-264 (L) Package Outline 4.60 (.181) 5.21 (.205) 1.80 (.071) 2.01 (.079) 15.49 (.610) 16.26 (.640) 19.51 (.768) 20.50 (.807) 3.10 (.122) 3.48 (.137) 5.38 (.212) 6.20 (.244) 5.79 (.228) 6.20 (.244) Drain Drain 20.80 (.819) 21.46 (.845) 4.50 (.177) Max. 050-7028 Rev- 4-2001 0.40 (.016) 0.79 (.031) 25.48 (1.003) 26.49 (1.043) 2.87 (.113) 3.12 (.123) 19.81 (.780) 20.32 (.800) 19.81 (.780) 21.39 (.842) Gate Drain Source Gate Drain Source 0.48 (.019) 0.84 (.033) 2.59 (.102) 3.00 (.118) 5.45 (.215) BSC 2-Plcs. 0.76 (.030) 1.30 (.051) 2.79 (.110) 3.18 (.125) 5.45 (.215) BSC 2-Plcs. These dimensions are equal to the TO-247 without the mounting hole. Dimensions in Millimeters and (Inches) APT's devices are covered by one or more of the following U.S.patents: 4,895,810 5,256,583 2.29 (.090) 2.69 (.106) 2.29 (.090) 2.69 (.106) 1.65 (.065) 2.13 (.084) 1.01 (.040) 1.40 (.055) 2.21 (.087) 2.59 (.102) UNIT 0.25 RqJC Dimensions in Millimeters and (Inches) 5,045,903 4,748,103 5,089,434 5,283,202 5,182,234 5,231,474 5,019,522 5,434,095 5,262,336 5,528,058 C/W