DS05-50205-1E
FUJITSU SEMICONDUCTOR
DATA SHEET
Stac ked MCP (Multi-Chip P ac kage) FLASH MEMORY & SRAM
CMOS
32M (× 8/×16) FLASH MEMORY &
2M (× 8/×16) STATIC RAM
MB84VD2208XEA-90/MB84VD2209XEA-90
■FEATURES
• Power supply voltage of 2.7 to 3.3V
• High perf ormance
90 ns maximum access time (Flash)
85 ns maximum access time (SRAM)
• Operating Temperature
–25 to +85°C
• Package 73-ball FBGA
(Continued)
■PRODUCT LINE UP
■PACKAGE
Flash Memory SRAM
Ordering Part No. VCCf, VCCs = 3.0 V MB84VD2208XEA-90/MB84VD2209XEA-90
Max. Address Access Time (ns) 90 85
Max. CE Access Time (ns) 90 85
Max. OE Access Time (ns) 40 45
+0.3 V
–0.3 V
73-ball plastic FBGA
( BGA-73P-M01)
2
MB84VD2208XEA-90/MB84VD2209XEA-90
(Continued)
1. FLASH MEMORY
• Simultaneous Read/Write operations (dual bank)
Multiple devices available with different bank sizes
Host system can program or erase in one bank, then immediately and simultaneously read from the other bank
Zero latency between read and write operations
Read-while-erase
Read-while-program
• Minim um 100,000 write/erase cycles
• Sector erase architecture
Eight 4 K words and sixty three 32 K words.
Any combination of sectors can be concurrently erased. Also supports full chip erase.
• Boot Code Sector Architecture
MB84VD2208XEA: Top sector
MB84VD2209XEA: Bottom sector
• Embedded EraseTM Algorithms
Automatically pre-programs and erases the chip or any sector
• Embedded ProgramTM Algorithms
Automatically writes and verifies data at specified address
•Data
Polling and Toggle Bit feature for detection of program or erase cycle completion
• Ready-Busy output (RY/BY)
Hardware method for detection of program or erase cycle completion
• Automatic sleep mode
When addresses remain stable, automatically switch themselves to low power mode.
•Low V
CCf write inhibit ≤ 2.5 V
• Hidden ROM (Hi-ROM) region
64K byte of Hi-ROM, accessible through a new “Hi-ROM Enable” command sequence
Factory serialized and protected to provide a secure electronic serial number (ESN)
•WP
/ACC input pin
At VIL, allows protection of boot sectors, regardless of sector protection/unprotection status
(MB84VD2208XEA:SA69,SA70 MB84VD2209XEA:SA0,SA1)
At VIH, allows removal of boot sector protection
At VACC, program time will reduse by 40%.
• Erase Suspend/Resume
Suspends the erase operation to allow a read in another sector within the same device
• Please refer to “MBM29DL32XTE/BE” data sheet in detailed function
2. SRAM
• Power dissipation
Operating: 40 mA max.
Standby : 7 µA max.
• Power down features using CE1s and CE2s
• Data retention supply voltage: 1.5 V to 3.3 V
•CE1
s and CE2s Chip Select
• Byte data control: LBs (DQ0 to DQ7), UBs(DQ8 to DQ15)
Embedded EraseTM and Embedded ProgramTM are trademarks of Advanced Micro Devices, Inc.
3
MB84VD2208XEA-90/MB84VD2209XEA-90
■PIN ASSIGNMENT
10
9
8
7
6
5
4
3
2
1
73 - ball FBGA
K
DQ8
DQ2
DQ11
DQ14
DQ5
CIOS
A
N.C.
N.C.
B
N.C.
N.C.
N.C.
N.C.
M
N.C.
N.C.
L
N.C.
N.C.
N.C.
N.C.
C
WE
A8
A11
N.C.
LBS
WP/
ACC
A7
D
A19
A12
A15
CE2S
A3
UBS
RESET
A6
E
A9
A13
A20
A2
A18
RY/BY
N.C.
A5
F
A10
A14
A1
A17
N.C.
N.C.
N.C.
A4
G
DQ6
SA
A16
A0
DQ1
N.C.
N.C.
VSS
J
DQ10
VCCf
VCCs
DQ12
DQ7
VSS
CE1S
DQ0
H
CEf
DQ13
DQ4
DQ3
DQ9
DQ15/
A−1
CIOf
OE
(Top View)
4
MB84VD2208XEA-90/MB84VD2209XEA-90
■ PIN DESCRIPTION
(Continued)
Pin No. Pin name Function Input/Output
G2
F2
E2
D2
F3
E3
D3
C3
C7
E7
F7
C8
C8
E8
F8
D9
G9
A0
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
A12
A13
A14
A15
A16
Address Inputs (Common) I
H8
F4
E4
D7
E6
A-1
A17
A18
A19
A20
Address Input (Flash) I
G8 SA Address Input (SRAM) I
J3
G4
K4
H5
H6
K7
G7
J8
K3
H4
J4
K5
J7
H7
K8
H8
DQ0
DQ1
DQ2
DQ3
DQ4
DQ5
DQ6
DQ7
DQ8
DQ9
DQ10
DQ11
DQ12
DQ13
DQ14
DD15
Data Inputs/Outputs (Common) I/O
H2 CEf Chip Enable (Flash) I
J2 CE1SChip Enable (SRAM) I
D6 CE2SChip Enable (SRAM) I
H3 OE Output Enab le (Common) I
C6 WE Write Enable (Common) I
E5 RY/BY Ready/Busy Outputs (Flash) Open Drain Output O
5
MB84VD2208XEA-90/MB84VD2209XEA-90
(Continued)
Pin No. Pin name Function Input/Output
D4 UBs Upper Byte Control (SRAM) I
C4 LBs Lower Byte Control (SRAM) I
H9 CIOf I/O Configur ation (Flash)
CIOf = VIH is W ord mode (×16), CIOf = VIL is Byte
mode (×8) I
K6 CIOs I/O Configuration (SRAM)
CIOs = VIH is W ord mode (×16), CIOs = VIL is
Byte mode (×8) I
D5 RESET Hardware Reset Pin/Sector Protection Unloc k
(Flash) I
C5 WP/ACC Write Protect / Acceleration (Flash) I
A1, A10,
B1, B5, B6, B10,
C1, E9,
F1, F9, F10,
G1, G10,
L1, L5, L6, L10,
M1, M10
N.C. No Internal Connection —
J9, G3 VSS Device Ground (Common) Power
J5 VCCf Device Power Supply (Flash) Power
J6 VCCs Device Power Supply (SRAM) Power
6
MB84VD2208XEA-90/MB84VD2209XEA-90
■BLOCK DIAGRAM
VCCfVSS
VCCsVSS
RY/BY
A0 to A20
A0 to A16
A0 to A20
A−1
WP/ACC
RESET
CEf
CIOf
SA
LBs
UBs
WE
OE
CE1s
CE2s
CIOs
32 M bit
Flash Memory
2 M bit
Static RAM
DQ0 to DQ15/A−1
DQ0 to DQ15/A−1
DQ0 to DQ15
7
MB84VD2208XEA-90/MB84VD2209XEA-90
■DEVICE BUS OPERATIONS
Table 1. 1 User Bus Operations (Flash=Word mode; CIOf=VCCf, SRAM=Word mode; CIOs=Vccs)
Legend: L = VIL, H = VIH, X = VIL or VIH. See "■ELECTRICAL CHARACTERISTICS 1.DC Characteristics"
for voltage levels.
Notes: 1. Other operations except for indicated this column are inhibited.
2. WE can be VIL if OE is VIL, OE at VIH initiates the write operations.
3. Do not apply CEf = VIL, CE1s = VIL and CE2s = VIH at a time.
4. It is also used for the extended sector group protections.
5. WP/ACC = VIL; protection of boot sectors.
WP/ACC = VIH; removal of boot sectors protection.
WP/ACC = VACC (9V) ; Program time will reduce by 40%.
6. SA; Don’t care or Open.
Operation
(Note1, 3) CEfCE1sCE2s OE WE SA
(Note6) LBsUBsDQ0 to
DQ7DQ8 to
DQ15 RESET WP/
ACC
(Note5)
Full Standby H HX
XX X X XHIGH-ZHIGH-Z H X
XL
Output Disable
HL HHH X X XHIGH-ZHIGH-Z
HX
XX X HHHIGH-ZHIGH-Z
LHX
HH X X XHIGH-ZHIGH-Z
XL
Read from Flash
(Note2) LHXLH X XX D
OUT DOUT HX
XL
Write to Flash L HX
HL X X X D
IN DIN HX
XL
Read from SRAM H L H L H X
LLD
OUT DOUT
HXHLHIGH-ZD
OUT
LHD
OUT HIGH-Z
Write to SRAM H L H X L X
LL D
IN DIN
HXHLHIGH-ZD
IN
LH D
IN HIGH-Z
Temporary Sector
Group Unprotection
(Note4) XX XXX X XX X X V
ID X
Flash Hardware
Reset XHX
XX X X XHIGH-ZHIGH-Z L X
XL
Boot Block Sector
Write Protection XX XXX X XX X X X L
8
MB84VD2208XEA-90/MB84VD2209XEA-90
Table 1. 2 User Bus Operations (Flash=Word mode; CIOf=VCCf, SRAM=Byte mode; CIOs=VSS)
Legend: L = VIL, H = VIH, X = VIL or VIH. See "■ELECTRICAL CHARACTERISTICS 1.DC Characteristics"
for voltage levels.
Notes: 1. Other operations except for indicated this column are inhibited.
2. WE can be VIL if OE is VIL, OE at VIH initiates the write operations.
3. Do not apply CEf = VIL, CE1s = VIL and CE2s = VIH at a time.
4. It is also used for the extended sector group protections.
5. WP/ACC = VIL; protection of boot sectors.
WP/ACC = VIH; removal of boot sectors protection.
WP/ACC = VACC (9V) ; Program time will reduce by 40%.
6. SA; Don’t care or Open.
Operation
(Note1, 3) CEfCE1sCE2sOEWE SA LBs
(Note6) UBs
(Note6) DQ0 to
DQ7DQ8 to
DQ15 RESET WP/
ACC
(Note5)
Full Standby H HX
X X X X X HIGH-Z HIGH-Z H X
XL
Output Disable
HL H
H H X X X HIGH-Z HIGH-Z
HX
X X X X X HIGH-Z HIGH-Z
LHX
H H X X X HIGH-Z HIGH-Z
XL
Read from Flash
(Note2) LHX
LHX X X D
OUT DOUT HX
XL
Write to Flash L HX
HLX X X D
IN DIN HX
XL
Read from SRAM H L H L H SA X X DOUT HIGH-Z H X
Write to SRAM H L H X L SA X X DIN HIGH-Z H X
Temporary Sector
Group
Unprotection
(Note4) X X X XXX X X X X V
ID X
Flash Hardware
Reset XHX
X X X X X HIGH-Z HIGH-Z L X
XL
Boot Block Sector
Write Protection X X X XXX X X X X X L
9
MB84VD2208XEA-90/MB84VD2209XEA-90
Table 1. 3 User Bus Operations (Flash=Byte mode; CIOf=VSS, SRAM=Byte mode; CIOs=VSS)
Legend: L = VIL, H = VIH, X = VIL or VIH. See "■ELECTRICAL CHARACTERISTICS 1.DC Characteristics"
for voltage levels.
Notes: 1. Other operations except for indicated this column are inhibited.
2. WE can be VIL if OE is VIL, OE at VIH initiates the write operations.
3. Do not apply CEf = VIL, CE1s = VIL and CE2s = VIH at a time.
4. It is also used for the extended sector group protections.
5. WP/ACC = VIL; protection of boot sectors.
WP/ACC = VIH; removal of boot sectors protection.
WP/ACC = VACC (9V) ; Program time will reduce by 40%.
6. SA; Don’t care or Open.
Operation
(Note1, 3) CEfCE1sCE2sDQ15/
A–1OE WE SA LBs
(Note6) UBs
(Note6) DQ0 to
DQ7DQ8 to
DQ14 RESET WP/
ACC
(Note5)
Full Standby H HXX X X X X X HIGH-Z HIGH-Z H X
XL
Output Disable
HL H X H H X X X HIGH-Z HIGH-Z
HX
X X X X X X HIGH-Z HIGH-Z
LHX
A–1 H H X X X HIGH-Z HIGH-Z
XL
Read from Flash
(Note2) LHX
A–1 LHX X X DOUT XH X
XL
Write to Flash L HX
A–1 HLX X X DIN XH X
XL
Read from SRAM H L H X L H SA X X DOUT HIGH-Z H X
Write to SRAM H L H X X L SA X X DIN HIGH-Z H X
Temporary Sector
Group
Unprotection
(Note4) XX X XXXX X X X X V
ID X
Flash Hardware
Reset XHXX X X X X X HIGH-Z HIGH-Z L X
XL
Boot Block Sector
Write Protection XX X XXXX X X X X X L
10
MB84VD2208XEA-90/MB84VD2209XEA-90
■FLEXIBLE SECTOR-ERASE ARCHITECTURE on FLASH MEMORY
• Eight 4 K words, and sixty three 32 K words.
• Individual-sector, multiple-sector, or bulk-erase capability.
(Continued)
SA70 :
SA69 :
SA68 :
SA67 :
SA66 :
SA65 :
SA64 :
SA63 :
SA62 :
SA61 :
SA60 :
SA59 :
SA58 :
SA57 :
SA56 :
SA55 :
SA54 :
SA53 :
SA52 :
SA51 :
SA50 :
SA49 :
SA48 :
SA47 :
SA46 :
SA45 :
SA44 :
SA43 :
SA42 :
SA41 :
SA40 :
SA39 :
SA38 :
SA37 :
SA36 :
SA35 :
SA34 :
SA33 :
SA32 :
SA31 :
SA30 :
SA29 :
SA28 :
SA27 :
SA26 :
SA25 :
SA24 :
SA23 :
SA22 :
SA21 :
SA20 :
SA19 :
SA18 :
SA17 :
SA16 :
SA15 :
SA14 :
SA13 :
SA12 :
SA11 :
SA10 :
SA9 :
SA8 :
SA7 :
SA6 :
SA5 :
SA4 :
SA3 :
SA2 :
SA1 :
SA0 :
8 KB
8 KB
8 KB
8 KB
8 KB
8 KB
8 KB
8 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
(4 KW)
(4 KW)
(4 KW)
(4 KW)
(4 KW)
(4 KW)
(4 KW)
(4 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
1FFFFFH
1FF000H
1FE000H
1FD000H
1FC000H
1FB000H
1FA000H
1F9000H
1F8000H
1F0000H
1E8000H
1E0000H
1D8000H
1D0000H
1C8000H
1C0000H
1B8000H
1B0000H
1A8000H
1A0000H
198000H
190000H
188000H
180000H
178000H
170000H
168000H
160000H
158000H
150000H
148000H
140000H
138000H
130000H
128000H
120000H
118000H
110000H
108000H
100000H
0F8000H
0F0000H
0E8000H
0E0000H
0D8000H
0D0000H
0C8000H
0C0000H
0B8000H
0B0000H
0A8000H
0A0000H
098000H
090000H
088000H
080000H
078000H
070000H
068000H
060000H
058000H
050000H
048000H
040000H
038000H
030000H
028000H
020000H
018000H
010000H
008000H
000000H
3FFFFFH
3FE000H
3FC000H
3FA000H
3F8000H
3F6000H
3F4000H
3F2000H
3F0000H
3E0000H
3D0000H
3C0000H
3B0000H
3A0000H
390000H
380000H
370000H
360000H
350000H
340000H
330000H
320000H
310000H
300000H
2F0000H
2E0000H
2D0000H
2C0000H
2B0000H
2A0000H
290000H
280000H
270000H
260000H
250000H
240000H
230000H
220000H
210000H
200000H
1F0000H
1E0000H
1D0000H
1C0000H
1B0000H
1A0000H
190000H
180000H
170000H
160000H
150000H
140000H
130000H
120000H
110000H
100000H
0F0000H
0E0000H
0D0000H
0C0000H
0B0000H
0A0000H
090000H
080000H
070000H
060000H
050000H
040000H
030000H
020000H
010000H
000000H
Word Mode Byte Mode
Bank 1
MB84VD22081EA
Bank 2
MB84VD22081EA
Bank 1
MB84VD22082EA
Bank 1
MB84VD22083EA
Bank 1
MB84VD22084EA
Bank 2
MB84VD22082EA
Bank 2
MB84VD22083EA
Bank 2
MB84VD22084EA
MB84VD2208XEA Sector Architecture (Top Boot Block)
11
MB84VD2208XEA-90/MB84VD2209XEA-90
(Continued)
SA70 :
SA69 :
SA68 :
SA67 :
SA66 :
SA65 :
SA64 :
SA63 :
SA62 :
SA61 :
SA60 :
SA59 :
SA58 :
SA57 :
SA56 :
SA55 :
SA54 :
SA53 :
SA52 :
SA51 :
SA50 :
SA49 :
SA48 :
SA47 :
SA46 :
SA45 :
SA44 :
SA43 :
SA42 :
SA41 :
SA40 :
SA39 :
SA38 :
SA37 :
SA36 :
SA35 :
SA34 :
SA33 :
SA32 :
SA31 :
SA30 :
SA29 :
SA28 :
SA27 :
SA26 :
SA25 :
SA24 :
SA23 :
SA22 :
SA21 :
SA20 :
SA19 :
SA18 :
SA17 :
SA16 :
SA15 :
SA14 :
SA13 :
SA12 :
SA11 :
SA10 :
SA9 :
SA8 :
SA7 :
SA6 :
SA5 :
SA4 :
SA3 :
SA2 :
SA1 :
SA0 :
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
64 KB
8 KB
8 KB
8 KB
8 KB
8 KB
8 KB
8 KB
8 KB
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(32 KW)
(4 KW)
(4 KW)
(4 KW)
(4 KW)
(4 KW)
(4 KW)
(4 KW)
(4 KW)
1FFFFFH
1F8000H
1F0000H
1E8000H
1E0000H
1D8000H
1D0000H
1C8000H
1C0000H
1B8000H
1B0000H
1A8000H
1A0000H
198000H
190000H
188000H
180000H
178000H
170000H
168000H
160000H
158000H
150000H
148000H
140000H
138000H
130000H
128000H
120000H
118000H
110000H
108000H
100000H
0F8000H
0F0000H
0E8000H
0E0000H
0D8000H
0D0000H
0C8000H
0C0000H
0B8000H
0B0000H
0A8000H
0A0000H
098000H
090000H
088000H
080000H
078000H
070000H
068000H
060000H
058000H
050000H
048000H
040000H
038000H
030000H
028000H
020000H
018000H
010000H
008000H
007000H
006000H
005000H
004000H
003000H
002000H
001000H
000000H
3FFFFFH
3F0000H
3E0000H
3D0000H
3C0000H
3B0000H
3A0000H
390000H
380000H
370000H
360000H
350000H
340000H
330000H
320000H
310000H
300000H
2F0000H
2E0000H
2D0000H
2C0000H
2B0000H
2A0000H
290000H
280000H
270000H
260000H
250000H
240000H
230000H
220000H
210000H
200000H
1F0000H
1E0000H
1D0000H
1C0000H
1B0000H
1A0000H
190000H
180000H
170000H
160000H
150000H
140000H
130000H
120000H
110000H
100000H
0F0000H
0E0000H
0D0000H
0C0000H
0B0000H
0A0000H
090000H
080000H
070000H
060000H
050000H
040000H
030000H
020000H
010000H
00E000H
00C000H
00A000H
008000H
006000H
004000H
002000H
000000H
Word Mode Byte Mode
Bank 2
MB84VD22091EA
Bank 1
MB84VD22091EA
Bank 2
MB84VD22092EA
Bank 2
MB84VD22093EA
Bank 2
MB84VD22094EA
Bank 1
MB84VD22092EA
Bank 1
MB84VD22093EA
Bank 1
MB84VD22094EA
MB84VD2209XEA Sector Architecture (Bottom Boot Block)
12
MB84VD2208XEA-90/MB84VD2209XEA-90
Table 2. 1 Sector Address Tables (MB84VD22081EA)
(Continued)
Bank Sector
Sector Address Address Range
(BYTE mode) Address Range
(WORD mode)
Bank Address
A20 A19 A18 A17 A16 A15 A14 A13 A12 A11
Bank 2
SA0 000000XXXX000000H to 00FFFFH 000000H to 007FFFH
SA1 000001XXXX010000H to 01FFFFH 008000H to 00FFFFH
SA2 000010XXXX020000H to 02FFFFH 010000H to 017FFFH
SA3 000011XXXX030000H to 03FFFFH 018000H to 01FFFFH
SA4 000100XXXX040000H to 04FFFFH 020000H to 027FFFH
SA5 000101XXXX050000H to 05FFFFH 028000H to 02FFFFH
SA6 000110XXXX060000H to 06FFFFH 030000H to 037FFFH
SA7 000111XXXX070000H to 07FFFFH 038000H to 03FFFFH
SA8 001000XXXX080000H to 08FFFFH 040000H to 047FFFH
SA9 001001XXXX090000H to 09FFFFH 048000H to 04FFFFH
SA10001010XXXX0A0000H to 0AFFFFH 050000H to 057FFFH
SA11001011XXXX0B0000H to 0BFFFFH 058000H to 05FFFFH
SA12001100XXXX0C0000H to 0CFFFFH 060000H to 067FFFH
SA13001101XXXX0D0000H to 0DFFFFH 068000H to 06FFFFH
SA14001110XXXX0E0000H to 0EFFFFH 070000H to 077FFFH
SA15001111XXXX0F0000H to 0FFFFFH 078000H to 07FFFFH
SA16010000XXXX100000H to 10FFFFH 080000H to 087FFFH
SA17010001XXXX110000H to 11FFFFH 088000H to 08FFFFH
SA18010010XXXX120000H to 12FFFFH 090000H to 097FFFH
SA19010011XXXX130000H to 13FFFFH 098000H to 09FFFFH
SA20010100XXXX140000H to 14FFFFH 0A0000H to 0A7FFFH
SA21010101XXXX150000H to 15FFFFH 0A8000H to 0AFFFFH
SA22010110XXXX160000H to 16FFFFH 0B0000H to 0B7FFFH
SA23010111XXXX170000H to 17FFFFH 0B8000H to 0BFFFFH
SA24011000XXXX180000H to 18FFFFH 0C0000H to 0C7FFFH
SA25011001XXXX190000H to 19FFFFH 0C8000H to 0CFFFFH
SA26011010XXXX1A0000H to 1AFFFFH 0D0000H to 0D7FFFH
SA27011011XXXX1B0000H to 1BFFFFH 0D8000H to 0DFFFFH
SA28011100XXXX1C0000H to 1CFFFFH 0E0000H to 0E7FFFH
SA29011101XXXX1D0000H to 1DFFFFH 0E8000H to 0EFFFFH
SA30011110XXXX1E0000H to 1EFFFFH 0F0000H to 0F7FFFH
SA31011111XXXX1F0000H to 1FFFFFH 0F8000H to 0FFFFFH
13
MB84VD2208XEA-90/MB84VD2209XEA-90
(Continued)
Bank Sector
Sector Address Address Range
(BYTE mode) Address Range
(WORD mode)
Bank Address
A20 A19 A18 A17 A16 A15 A14 A13 A12 A11
Bank 2
SA32100000XXXX200000H to 20FFFFH 100000H to 107FFFH
SA33100001XXXX210000H to 21FFFFH 108000H to 10FFFFH
SA34100010XXXX220000H to 22FFFFH 110000H to 117FFFH
SA35100011XXXX230000H to 23FFFFH 118000H to 11FFFFH
SA36100100XXXX240000H to 24FFFFH 120000H to 127FFFH
SA37100101XXXX250000H to 25FFFFH 128000H to 12FFFFH
SA38100110XXXX260000H to 26FFFFH 130000H to 137FFFH
SA39100111XXXX270000H to 27FFFFH 138000H to 13FFFFH
SA40101000XXXX280000H to 28FFFFH 140000H to 147FFFH
SA41101001XXXX290000H to 29FFFFH 148000H to 14FFFFH
SA42101010XXXX2A0000H to 2AFFFFH 150000H to 157FFFH
SA43101011XXXX2B0000H to 2BFFFFH 158000H to 15FFFFH
SA44101100XXXX2C0000H to 2CFFFFH 160000H to 167FFFH
SA45101101XXXX2D0000H to 2DFFFFH 168000H to 16FFFFH
SA46101110XXXX2E0000H to 2EFFFFH 170000H to 177FFFH
SA47101111XXXX2F0000H to 2FFFFFH 178000H to 17FFFFH
SA48110000XXXX300000H to 30FFFFH 180000H to 187FFFH
SA49110001XXXX310000H to 31FFFFH 188000H to 18FFFFH
SA50110010XXXX320000H to 32FFFFH 190000H to 197FFFH
SA51110011XXXX330000H to 33FFFFH 198000H to 19FFFFH
SA52110100XXXX340000H to 34FFFFH 1A0000H to 1A7FFFH
SA53110101XXXX350000H to 35FFFFH 1A8000H to 1AFFFFH
SA54110110XXXX360000H to 36FFFFH 1B0000H to 1B7FFFH
SA55110111XXXX370000H to 37FFFFH 1B8000H to 1BFFFFH
SA56111000XXXX380000H to 38FFFFH 1C0000H to 1C7FFFH
SA57111001XXXX390000H to 39FFFFH 1C8000H to 1CFFFFH
SA58111010XXXX3A0000H to 3AFFFFH 1D0000H to 1D7FFFH
SA59111011XXXX3B0000H to 3BFFFFH 1D8000H to 1DFFFFH
SA60111100XXXX3C0000H to 3CFFFFH 1E0000H to 1E7FFFH
SA61111101XXXX3D0000H to 3DFFFFH 1E8000H to 1EFFFFH
SA62111110XXXX3E0000H to 3EFFFFH 1F0000H to 1F7FFFH
Bank 1
SA63111111000X3F0000H to 3F1FFFH 1F8000H to 1F8FFFH
SA64111111001X3F2000H to 3F3FFFH 1F9000H to 1F9FFFH
SA65111111010X3F4000H to 3F5FFFH 1FA000H to 1FAFFFH
SA66111111011X3F6000H to 3F7FFFH 1FB000H to 1FBFFFH
SA67111111100X3F8000H to 3F9FFFH 1FC000H to 1FCFFFH
SA68111111101X3FA000H to 3FAFFFH 1FD000H to 1FDFFFH
SA69111111110X3FC000H to 3FCFFFH 1FE000H to 1FEFFFH
SA70111111111X3FE000H to 3FFFFFH 1FF000H to 1FFFFFH
14
MB84VD2208XEA-90/MB84VD2209XEA-90
Table 2. 2 Sector Address Tables (MB84VD22091EA)
(Continued)
Bank Sector
Sector Address Address Range
(BYTE mode) Address Range
(WORD mode)
Band Address
A20 A19 A18 A17 A16 A15 A14 A13 A12 A11
Bank 1
SA0 000000000X000000H to 001FFFH 000000H to 000FFFH
SA1 000000001X002000H to 003FFFH 001000H to 001FFFH
SA2 000000010X004000H to 005FFFH 002000H to 002FFFH
SA3 000000011X006000H to 007FFFH 003000H to 003FFFH
SA4 000000100X008000H to 009FFFH 004000H to 004FFFH
SA5 000000101X00A000H to 00BFFFH005000H to 005FFFH
SA6 000000110X00C000H to 00DFFFH 006000H to 006FFFH
SA7 000000111X00E000H to 00FFFFH 007000H to 007FFFH
Bank 2
SA8 000001XXXX010000H to 01FFFFH 008000H to 00FFFFH
SA9 000010XXXX020000H to 02FFFFH 010000H to 017FFFH
SA10000011XXXX030000H to 03FFFFH 018000H to 01FFFFH
SA11000100XXXX040000H to 04FFFFH 020000H to 027FFFH
SA12000101XXXX050000H to 05FFFFH 028000H to 02FFFFH
SA13000110XXXX060000H to 06FFFFH 030000H to 037FFFH
SA14000111XXXX070000H to 07FFFFH 038000H to 03FFFFH
SA15001000XXXX080000H to 08FFFFH 040000H to 047FFFH
SA16001001XXXX090000H to 09FFFFH 048000H to 04FFFFH
SA17001010XXXX0A0000H to 0AFFFFH 050000H to 057FFFH
SA18001011XXXX0B0000H to 0BFFFFH 058000H to 05FFFFH
SA19001100XXXX0C0000H to 0CFFFFH 060000H to 067FFFH
SA20001101XXXX0D0000H to 0DFFFFH 068000H to 06FFFFH
SA21001110XXXX0E0000H to 0EFFFFH 070000H to 077FFFH
SA22001111XXXX0F0000H to 0FFFFFH 078000H to 07FFFFH
SA23010000XXXX100000H to 10FFFFH 080000H to 087FFFH
SA24010001XXXX110000H to 11FFFFH 088000H to 08FFFFH
SA25010010XXXX120000H to 12FFFFH 090000H to 097FFFH
SA26010011XXXX130000H to 13FFFFH 098000H to 09FFFFH
SA27010100XXXX140000H to 14FFFFH 0A0000H to 0A7FFFH
SA28010101XXXX150000H to 15FFFFH 0A8000H to 0AFFFFH
SA29010110XXXX160000H to 16FFFFH 0B0000H to 0B7FFFH
SA30010111XXXX170000H to 17FFFFH 0B8000H to 0BFFFFH
SA31011000XXXX180000H to 18FFFFH 0C0000H to 0C7FFFH
SA32011001XXXX190000H to 19FFFFH 0C8000H to 0CFFFFH
SA33011010XXXX1A0000H to 1AFFFFH 0D0000H to 0D7FFFH
SA34011011XXXX1B0000H to 1BFFFFH 0D8000H to 0DFFFFH
SA35011100XXXX1C0000H to 1CFFFFH 0E0000H to 0E7FFFH
SA36011101XXXX1D0000H to 1DFFFFH 0E8000H to 0EFFFFH
15
MB84VD2208XEA-90/MB84VD2209XEA-90
(Continued)
Bank Sector
Sector Address Address Range
(BYTE mode) Address Range
(WORD mode)
Bank Address
A20 A19 A18 A17 A16 A15 A14 A13 A12 A11
Bank 2
SA37011110XXXX1E0000H to 1EFFFFH 0F0000H to 0F7FFFH
SA38011111XXXX1F0000H to 1FFFFFH 0F8000H to 0FFFFFH
SA39100000XXXX200000H to 20FFFFH 100000H to 107FFFH
SA40100001XXXX210000H to 21FFFFH 108000H to 10FFFFH
SA41100010XXXX220000H to 22FFFFH 110000H to 117FFFH
SA42100011XXXX230000H to 23FFFFH 118000H to 11FFFFH
SA43100100XXXX240000H to 24FFFFH 120000H to 127FFFH
SA44100101XXXX250000H to 25FFFFH 128000H to 12FFFFH
SA45100110XXXX260000H to 26FFFFH 130000H to 137FFFH
SA46100111XXXX270000H to 27FFFFH 138000H to 13FFFFH
SA47101000XXXX280000H to 28FFFFH 140000H to 147FFFH
SA48101001XXXX290000H to 29FFFFH 148000H to 14FFFFH
SA49101010XXXX2A0000H to 2AFFFFH 150000H to 157FFFH
SA50101011XXXX2B0000H to 2BFFFFH 158000H to 15FFFFH
SA51101100XXXX2C0000H to 2CFFFFH 160000H to 167FFFH
SA52101101XXXX2D0000H to 2DFFFFH 168000H to 16FFFFH
SA53101110XXXX2E0000H to 2EFFFFH 170000H to 177FFFH
SA54101111XXXX2F0000H to 2FFFFFH 178000H to 17FFFFH
SA55110000XXXX300000H to 30FFFFH 180000H to 187FFFH
SA56110001XXXX310000H to 31FFFFH 188000H to 18FFFFH
SA57110010XXXX320000H to 32FFFFH 190000H to 197FFFH
SA58110011XXXX330000H to 33FFFFH 198000H to 19FFFFH
SA59110100XXXX340000H to 34FFFFH 1A0000H to 1A7FFFH
SA60110101XXXX350000H to 35FFFFH 1A8000H to 1AFFFFH
SA61110110XXXX360000H to 36FFFFH 1B0000H to 1B7FFFH
SA62110111XXXX370000H to 37FFFFH 1B8000H to 1BFFFFH
SA63111000XXXX380000H to 38FFFFH 1C0000H to 1C7FFFH
SA64111001XXXX390000H to 39FFFFH 1C8000H to 1CFFFFH
SA65111010XXXX3A0000H to 3AFFFFH 1D0000H to 1D7FFFH
SA66111011XXXX3B0000H to 3BFFFFH 1D8000H to 1DFFFFH
SA67111100XXXX3C0000H to 3CFFFFH 1E0000H to 1E7FFFH
SA68111101XXXX3D0000H to 3DFFFFH 1E8000H to 1EFFFFH
SA69111110XXXX3E0000H to 3EFFFFH 1F0000H to 1F7FFFH
SA70111111XXXX3F0000H to 3FFFFFH 1F8000H to 1FFFFFH
16
MB84VD2208XEA-90/MB84VD2209XEA-90
Table 2. 3 Sector Address Tables (MB84VD22082EA)
(Continued)
Bank Sector
Sector Address Address Range
(BYTE mode) Address Range
(WORD mode)
Bank Address
A20 A19 A18 A17 A16 A15 A14 A13 A12 A11
Bank 2
SA0 000000XXXX000000H to 00FFFFH 000000H to 007FFFH
SA1 000001XXXX010000H to 01FFFFH 008000H to 00FFFFH
SA2 000010XXXX020000H to 02FFFFH 010000H to 017FFFH
SA3 000011XXXX030000H to 03FFFFH 018000H to 01FFFFH
SA4 000100XXXX040000H to 04FFFFH 020000H to 027FFFH
SA5 000101XXXX050000H to 05FFFFH 028000H to 02FFFFH
SA6 000110XXXX060000H to 06FFFFH 030000H to 037FFFH
SA7 000111XXXX070000H to 07FFFFH 038000H to 03FFFFH
SA8 001000XXXX080000H to 08FFFFH 040000H to 047FFFH
SA9 001001XXXX090000H to 09FFFFH 048000H to 04FFFFH
SA10001010XXXX0A0000H to 0AFFFFH 050000H to 057FFFH
SA11001011XXXX0B0000H to 0BFFFFH 058000H to 05FFFFH
SA12001100XXXX0C0000H to 0CFFFFH 060000H to 067FFFH
SA13001101XXXX0D0000H to 0DFFFFH 068000H to 06FFFFH
SA14001110XXXX0E0000H to 0EFFFFH 070000H to 077FFFH
SA15001111XXXX0F0000H to 0FFFFFH 078000H to 07FFFFH
SA16010000XXXX100000H to 10FFFFH 080000H to 087FFFH
SA17010001XXXX110000H to 11FFFFH 088000H to 08FFFFH
SA18010010XXXX120000H to 12FFFFH 090000H to 097FFFH
SA19010011XXXX130000H to 13FFFFH 098000H to 09FFFFH
SA20010100XXXX140000H to 14FFFFH 0A0000H to 0A7FFFH
SA21010101XXXX150000H to 15FFFFH 0A8000H to 0AFFFFH
SA22010110XXXX160000H to 16FFFFH 0B0000H to 0B7FFFH
SA23010111XXXX170000H to 17FFFFH 0B8000H to 0BFFFFH
SA24011000XXXX180000H to 18FFFFH 0C0000H to 0C7FFFH
SA25011001XXXX190000H to 19FFFFH 0C8000H to 0CFFFFH
SA26011010XXXX1A0000H to 1AFFFFH 0D0000H to 0D7FFFH
SA27011011XXXX1B0000H to 1BFFFFH 0D8000H to 0DFFFFH
SA28011100XXXX1C0000H to 1CFFFFH 0E0000H to 0E7FFFH
SA29011101XXXX1D0000H to 1DFFFFH 0E8000H to 0EFFFFH
SA30011110XXXX1E0000H to 1EFFFFH 0F0000H to 0F7FFFH
SA31011111XXXX1F0000H to 1FFFFFH 0F8000H to 0FFFFFH
17
MB84VD2208XEA-90/MB84VD2209XEA-90
(Continued)
Bank Sector
Sector Address Address Range
(BYTE mode) Address Range
(WORD mode)
Bank Address
A20 A19 A18 A17 A16 A15 A14 A13 A12 A11
Bank 2
SA32100000XXXX200000H to 20FFFFH 100000H to 107FFFH
SA33100001XXXX210000H to 21FFFFH 108000H to 10FFFFH
SA34100010XXXX220000H to 22FFFFH 110000H to 117FFFH
SA35100011XXXX230000H to 23FFFFH 118000H to 11FFFFH
SA36100100XXXX240000H to 24FFFFH 120000H to 127FFFH
SA37100101XXXX250000H to 25FFFFH 128000H to 12FFFFH
SA38100110XXXX260000H to 26FFFFH 130000H to 137FFFH
SA39100111XXXX270000H to 27FFFFH 138000H to 13FFFFH
SA40101000XXXX280000H to 28FFFFH 140000H to 147FFFH
SA41101001XXXX290000H to 29FFFFH 148000H to 14FFFFH
SA42101010XXXX2A0000H to 2AFFFFH 150000H to 157FFFH
SA43101011XXXX2B0000H to 2BFFFFH 158000H to 15FFFFH
SA44101100XXXX2C0000H to 2CFFFFH 160000H to 167FFFH
SA45101101XXXX2D0000H to 2DFFFFH 168000H to 16FFFFH
SA46101110XXXX2E0000H to 2EFFFFH 170000H to 177FFFH
SA47101111XXXX2F0000H to 2FFFFFH 178000H to 17FFFFH
SA48110000XXXX300000H to 30FFFFH 180000H to 187FFFH
SA49110001XXXX310000H to 31FFFFH 188000H to 18FFFFH
SA50110010XXXX320000H to 32FFFFH 190000H to 197FFFH
SA51110011XXXX330000H to 33FFFFH 198000H to 19FFFFH
SA52110100XXXX340000H to 34FFFFH 1A0000H to 1A7FFFH
SA53110101XXXX350000H to 35FFFFH 1A8000H to 1AFFFFH
SA54110110XXXX360000H to 36FFFFH 1B0000H to 1B7FFFH
SA55110111XXXX370000H to 37FFFFH 1B8000H to 1BFFFFH
Bank 1
SA56111000XXXX380000H to 38FFFFH 1C0000H to 1C7FFFH
SA57111001XXXX390000H to 39FFFFH 1C8000H to 1CFFFFH
SA58111010XXXX3A0000H to 3AFFFFH 1D0000H to 1D7FFFH
SA59111011XXXX3B0000H to 3BFFFFH 1D8000H to 1DFFFFH
SA60111100XXXX3C0000H to 3CFFFFH 1E0000H to 1E7FFFH
SA61111101XXXX3D0000H to 3DFFFFH 1E8000H to 1EFFFFH
SA62111110XXXX3E0000H to 3EFFFFH 1F0000H to 1F7FFFH
SA63111111000X3F0000H to 3F1FFFH 1F8000H to 1F8FFFH
SA64111111001X3F2000H to 3F3FFFH 1F9000H to 1F9FFFH
SA65111111010X3F4000H to 3F5FFFH 1FA000H to 1FAFFFH
SA66111111011X3F6000H to 3F7FFFH 1FB000H to 1FBFFFH
SA67111111100X3F8000H to 3F9FFFH 1FC000H to 1FCFFFH
SA68111111101X3FA000H to 3FAFFFH 1FD000H to 1FDFFFH
SA69111111110X3FC000H to 3FCFFFH 1FE000H to 1FEFFFH
SA70111111111X3FE000H to 3FFFFFH 1FF000H to 1FFFFFH
18
MB84VD2208XEA-90/MB84VD2209XEA-90
Table 2. 4 Sector Address Tables (MB84VD22092EA)
(Continued)
Bank Sector
Sector Address Address Range
(BYTE mode) Address Range
(WORD mode)
Bank Address
A20 A19 A18 A17 A16 A15 A14 A13 A12 A11
Bank 1
SA0 000000000X000000H to 001FFFH 000000H to 000FFFH
SA1 000000001X002000H to 003FFFH 001000H to 001FFFH
SA2 000000010X004000H to 005FFFH 002000H to 002FFFH
SA3 000000011X006000H to 007FFFH 003000H to 003FFFH
SA4 000000100X008000H to 009FFFH 004000H to 004FFFH
SA5 000000101X00A000H to 00BFFFH005000H to 005FFFH
SA6 000000110X00C000H to 00DFFFH 006000H to 006FFFH
SA7 000000111X00E000H to 00FFFFH 007000H to 007FFFH
SA8 000001XXXX010000H to 01FFFFH 008000H to 00FFFFH
SA9 000010XXXX020000H to 02FFFFH 010000H to 017FFFH
SA10000011XXXX030000H to 03FFFFH 018000H to 01FFFFH
SA11000100XXXX040000H to 04FFFFH 020000H to 027FFFH
SA12000101XXXX050000H to 05FFFFH 028000H to 02FFFFH
SA13000110XXXX060000H to 06FFFFH 030000H to 037FFFH
SA14000111XXXX070000H to 07FFFFH 038000H to 03FFFFH
Bank 2
SA15001000XXXX080000H to 08FFFFH 040000H to 047FFFH
SA16001001XXXX090000H to 09FFFFH 048000H to 04FFFFH
SA17001010XXXX0A0000H to 0AFFFFH 050000H to 057FFFH
SA18001011XXXX0B0000H to 0BFFFFH 058000H to 05FFFFH
SA19001100XXXX0C0000H to 0CFFFFH 060000H to 067FFFH
SA20001101XXXX0D0000H to 0DFFFFH 068000H to 06FFFFH
SA21001110XXXX0E0000H to 0EFFFFH 070000H to 077FFFH
SA22001111XXXX0F0000H to 0FFFFFH 078000H to 07FFFFH
SA23010000XXXX100000H to 10FFFFH 080000H to 087FFFH
SA24010001XXXX110000H to 11FFFFH 088000H to 08FFFFH
SA25010010XXXX120000H to 12FFFFH 090000H to 097FFFH
SA26010011XXXX130000H to 13FFFFH 098000H to 09FFFFH
SA27010100XXXX140000H to 14FFFFH 0A0000H to 0A7FFFH
SA28010101XXXX150000H to 15FFFFH 0A8000H to 0AFFFFH
SA29010110XXXX160000H to 16FFFFH 0B0000H to 0B7FFFH
SA30010111XXXX170000H to 17FFFFH 0B8000H to 0BFFFFH
SA31011000XXXX180000H to 18FFFFH 0C0000H to 0C7FFFH
SA32011001XXXX190000H to 19FFFFH 0C8000H to 0CFFFFH
SA33011010XXXX1A0000H to 1AFFFFH 0D0000H to 0D7FFFH
SA34011011XXXX1B0000H to 1BFFFFH 0D8000H to 0DFFFFH
SA35011100XXXX1C0000H to 1CFFFFH 0E0000H to 0E7FFFH
SA36011101XXXX1D0000H to 1DFFFFH 0E8000H to 0EFFFFH
19
MB84VD2208XEA-90/MB84VD2209XEA-90
(Continued)
Bank Sector
Sector Address Address Range
(BYTE mode) Address Range
(WORD mode)
Bank Address
A20 A19 A18 A17 A16 A15 A14 A13 A12 A11
Bank 2
SA37011110XXXX1E0000H to 1EFFFFH 0F0000H to 0F7FFFH
SA38011111XXXX1F0000H to 1FFFFFH 0F8000H to 0FFFFFH
SA39100000XXXX200000H to 20FFFFH 100000H to 107FFFH
SA40100001XXXX210000H to 21FFFFH 108000H to 10FFFFH
SA41100010XXXX220000H to 22FFFFH 110000H to 117FFFH
SA42100011XXXX230000H to 23FFFFH 118000H to 11FFFFH
SA43100100XXXX240000H to 24FFFFH 120000H to 127FFFH
SA44100101XXXX250000H to 25FFFFH 128000H to 12FFFFH
SA45100110XXXX260000H to 26FFFFH 130000H to 137FFFH
SA46100111XXXX270000H to 27FFFFH 138000H to 13FFFFH
SA47101000XXXX280000H to 28FFFFH 140000H to 147FFFH
SA48101001XXXX290000H to 29FFFFH 148000H to 14FFFFH
SA49101010XXXX2A0000H to 2AFFFFH 150000H to 157FFFH
SA50101011XXXX2B0000H to 2BFFFFH 158000H to 15FFFFH
SA51101100XXXX2C0000H to 2CFFFFH 160000H to 167FFFH
SA52101101XXXX2D0000H to 2DFFFFH 168000H to 16FFFFH
SA53101110XXXX2E0000H to 2EFFFFH 170000H to 177FFFH
SA54101111XXXX2F0000H to 2FFFFFH 178000H to 17FFFFH
SA55110000XXXX300000H to 30FFFFH 180000H to 187FFFH
SA56110001XXXX310000H to 31FFFFH 188000H to 18FFFFH
SA57110010XXXX320000H to 32FFFFH 190000H to 197FFFH
SA58110011XXXX330000H to 33FFFFH 198000H to 19FFFFH
SA59110100XXXX340000H to 34FFFFH 1A0000H to 1A7FFFH
SA60110101XXXX350000H to 35FFFFH 1A8000H to 1AFFFFH
SA61110110XXXX360000H to 36FFFFH 1B0000H to 1B7FFFH
SA62110111XXXX370000H to 37FFFFH 1B8000H to 1BFFFFH
SA63111000XXXX380000H to 38FFFFH 1C0000H to 1C7FFFH
SA64111001XXXX390000H to 39FFFFH 1C8000H to 1CFFFFH
SA65111010XXXX3A0000H to 3AFFFFH 1D0000H to 1D7FFFH
SA66111011XXXX3B0000H to 3BFFFFH 1D8000H to 1DFFFFH
SA67111100XXXX3C0000H to 3CFFFFH 1E0000H to 1E7FFFH
SA68111101XXXX3D0000H to 3DFFFFH 1E8000H to 1EFFFFH
SA69111110XXXX3E0000H to 3EFFFFH 1F0000H to 1F7FFFH
SA70111111XXXX3F0000H to 3FFFFFH 1F8000H to 1FFFFFH
20
MB84VD2208XEA-90/MB84VD2209XEA-90
Table 2. 5 Sector Address Tables (MB84VD22083EA)
(Continued)
Bank Sector
Sector Address Address Range
(BYTE mode) Address Range
(WORD mode)
Bank Address
A20 A19 A18 A17 A16 A15 A14 A13 A12 A11
Bank 2
SA0 000000XXXX000000H to 00FFFFH 000000H to 007FFFH
SA1 000001XXXX010000H to 01FFFFH 008000H to 00FFFFH
SA2 000010XXXX020000H to 02FFFFH 010000H to 017FFFH
SA3 000011XXXX030000H to 03FFFFH 018000H to 01FFFFH
SA4 000100XXXX040000H to 04FFFFH 020000H to 027FFFH
SA5 000101XXXX050000H to 05FFFFH 028000H to 02FFFFH
SA6 000110XXXX060000H to 06FFFFH 030000H to 037FFFH
SA7 000111XXXX070000H to 07FFFFH 038000H to 03FFFFH
SA8 001000XXXX080000H to 08FFFFH 040000H to 047FFFH
SA9 001001XXXX090000H to 09FFFFH 048000H to 04FFFFH
SA10001010XXXX0A0000H to 0AFFFFH050000H to 057FFFH
SA11001011XXXX0B0000H to 0BFFFFH058000H to 05FFFFH
SA12001100XXXX0C0000H to 0CFFFFH 060000H to 067FFFH
SA13001101XXXX0D0000H to 0DFFFFH 068000H to 06FFFFH
SA14001110XXXX0E0000H to 0EFFFFH070000H to 077FFFH
SA15001111XXXX0F0000H to 0FFFFFH 078000H to 07FFFFH
SA16010000XXXX100000H to 10FFFFH 080000H to 087FFFH
SA17010001XXXX110000H to 11FFFFH 088000H to 08FFFFH
SA18010010XXXX120000H to 12FFFFH 090000H to 097FFFH
SA19010011XXXX130000H to 13FFFFH 098000H to 09FFFFH
SA20010100XXXX140000H to 14FFFFH 0A0000H to 0A7FFFH
SA21010101XXXX150000H to 15FFFFH 0A8000H to 0AFFFFH
SA22010110XXXX160000H to 16FFFFH 0B0000H to 0B7FFFH
SA23010111XXXX170000H to 17FFFFH 0B8000H to 0BFFFFH
SA24011000XXXX180000H to 18FFFFH 0C0000H to 0C7FFFH
SA25011001XXXX190000H to 19FFFFH 0C8000H to 0CFFFFH
SA26011010XXXX1A0000H to 1AFFFFH0D0000H to 0D7FFFH
SA27011011XXXX1B0000H to 1BFFFFH0D8000H to 0DFFFFH
SA28011100XXXX1C0000H to 1CFFFFH 0E0000H to 0E7FFFH
SA29011101XXXX1D0000H to 1DFFFFH 0E8000H to 0EFFFFH
SA30011110XXXX1E0000H to 1EFFFFH0F0000H to 0F7FFFH
SA31011111XXXX1F0000H to 1FFFFFH 0F8000H to 0FFFFFH
21
MB84VD2208XEA-90/MB84VD2209XEA-90
(Continued)
Bank Sector
Sector Address Address Range
(BYTE mode) Address Range
(WORD mode)
Bank Address
A20 A19 A18 A17 A16 A15 A14 A13 A12 A11
Bank 2
SA32100000XXXX200000H to 20FFFFH 100000H to 107FFFH
SA33100001XXXX210000H to 21FFFFH 108000H to 10FFFFH
SA34100010XXXX220000H to 22FFFFH 110000H to 117FFFH
SA35100011XXXX230000H to 23FFFFH 118000H to 11FFFFH
SA36100100XXXX240000H to 24FFFFH 120000H to 127FFFH
SA37100101XXXX250000H to 25FFFFH 128000H to 12FFFFH
SA38100110XXXX260000H to 26FFFFH 130000H to 137FFFH
SA39100111XXXX270000H to 27FFFFH 138000H to 13FFFFH
SA40101000XXXX280000H to 28FFFFH 140000H to 147FFFH
SA41101001XXXX290000H to 29FFFFH 148000H to 14FFFFH
SA42101010XXXX2A0000H to 2AFFFFH 150000H to 157FFFH
SA43101011XXXX2B0000H to 2BFFFFH 158000H to 15FFFFH
SA44101100XXXX2C0000H to 2CFFFFH 160000H to 167FFFH
SA45101101XXXX2D0000H to 2DFFFFH 168000H to 16FFFFH
SA46101110XXXX2E0000H to 2EFFFFH 170000H to 177FFFH
SA47101111XXXX2F0000H to 2FFFFFH 178000H to 17FFFFH
Bank 1
SA48110000XXXX300000H to 30FFFFH 180000H to 187FFFH
SA49110001XXXX310000H to 31FFFFH 188000H to 18FFFFH
SA50110010XXXX320000H to 32FFFFH 190000H to 197FFFH
SA51110011XXXX330000H to 33FFFFH 198000H to 19FFFFH
SA52110100XXXX340000H to 34FFFFH 1A0000H to 1A7FFFH
SA53110101XXXX350000H to 35FFFFH 1A8000H to 1AFFFFH
SA54110110XXXX360000H to 36FFFFH 1B0000H to 1B7FFFH
SA55110111XXXX370000H to 37FFFFH 1B8000H to 1BFFFFH
SA56111000XXXX380000H to 38FFFFH 1C0000H to 1C7FFFH
SA57111001XXXX390000H to 39FFFFH 1C8000H to 1CFFFFH
SA58111010XXXX3A0000H to 3AFFFFH 1D0000H to 1D7FFFH
SA59111011XXXX3B0000H to 3BFFFFH 1D8000H to 1DFFFFH
SA60111100XXXX3C0000H to 3CFFFFH 1E0000H to 1E7FFFH
SA61111101XXXX3D0000H to 3DFFFFH 1E8000H to 1EFFFFH
SA62111110XXXX3E0000H to 3EFFFFH 1F0000H to 1F7FFFH
SA63111111000X3F0000H to 3F1FFFH 1F8000H to 1F8FFFH
SA64111111001X3F2000H to 3F3FFFH 1F9000H to 1F9FFFH
SA65111111010X3F4000H to 3F5FFFH 1FA000H to 1FAFFFH
SA66111111011X3F6000H to 3F7FFFH 1FB000H to 1FBFFFH
SA67111111100X3F8000H to 3F9FFFH 1FC000H to 1FCFFFH
SA68111111101X3FA000H to 3FAFFFH 1FD000H to 1FDFFFH
SA69111111110X3FC000H to 3FCFFFH 1FE000H to 1FEFFFH
SA70111111111X3FE000H to 3FFFFFH 1FF000H to 1FFFFFH
22
MB84VD2208XEA-90/MB84VD2209XEA-90
Table 2. 6 Sector Address Tables (MB84VD22093EA)
(Continued)
Bank Sector
Sector Address Address Range
(BYTE mode) Address Range
(WORD mode)
Bank Address
A20 A19 A18 A17 A16 A15 A14 A13 A12 A11
Bank 1
SA0 000000000X000000H to 001FFFH 000000H to 000FFFH
SA1 000000001X002000H to 003FFFH 001000H to 001FFFH
SA2 000000010X004000H to 005FFFH 002000H to 002FFFH
SA3 000000011X006000H to 007FFFH 003000H to 003FFFH
SA4 000000100X008000H to 009FFFH 004000H to 004FFFH
SA5 000000101X00A000H to 00BFFFH005000H to 005FFFH
SA6 000000110X00C000H to 00DFFFH 006000H to 006FFFH
SA7 000000111X00E000H to 00FFFFH 007000H to 007FFFH
SA8 000001XXXX010000H to 01FFFFH 008000H to 00FFFFH
SA9 000010XXXX020000H to 02FFFFH 010000H to 017FFFH
SA10000011XXXX030000H to 03FFFFH 018000H to 01FFFFH
SA11000100XXXX040000H to 04FFFFH 020000H to 027FFFH
SA12000101XXXX050000H to 05FFFFH 028000H to 02FFFFH
SA13000110XXXX060000H to 06FFFFH 030000H to 037FFFH
SA14000111XXXX070000H to 07FFFFH 038000H to 03FFFFH
SA15001000XXXX080000H to 08FFFFH 040000H to 047FFFH
SA16001001XXXX090000H to 09FFFFH 048000H to 04FFFFH
SA17001010XXXX0A0000H to 0AFFFFH 050000H to 057FFFH
SA18001011XXXX0B0000H to 0BFFFFH 058000H to 05FFFFH
SA19001100XXXX0C0000H to 0CFFFFH 060000H to 067FFFH
SA20001101XXXX0D0000H to 0DFFFFH 068000H to 06FFFFH
SA21001110XXXX0E0000H to 0EFFFFH 070000H to 077FFFH
SA22001111XXXX0F0000H to 0FFFFFH 078000H to 07FFFFH
Bank 2
SA23010000XXXX100000H to 10FFFFH 080000H to 087FFFH
SA24010001XXXX110000H to 11FFFFH 088000H to 08FFFFH
SA25010010XXXX120000H to 12FFFFH 090000H to 097FFFH
SA26010011XXXX130000H to 13FFFFH 098000H to 09FFFFH
SA27010100XXXX140000H to 14FFFFH 0A0000H to 0A7FFFH
SA28010101XXXX150000H to 15FFFFH 0A8000H to 0AFFFFH
SA29010110XXXX160000H to 16FFFFH 0B0000H to 0B7FFFH
SA30010111XXXX170000H to 17FFFFH 0B8000H to 0BFFFFH
SA31011000XXXX180000H to 18FFFFH 0C0000H to 0C7FFFH
SA32011001XXXX190000H to 19FFFFH 0C8000H to 0CFFFFH
SA33011010XXXX1A0000H to 1AFFFFH 0D0000H to 0D7FFFH
SA34011011XXXX1B0000H to 1BFFFFH 0D8000H to 0DFFFFH
SA35011100XXXX1C0000H to 1CFFFFH 0E0000H to 0E7FFFH
SA36011101XXXX1D0000H to 1DFFFFH 0E8000H to 0EFFFFH
23
MB84VD2208XEA-90/MB84VD2209XEA-90
(Continued)
Bank Sector
Sector Address Address Range
(BYTE mode) Address Range
(WORD mode)
Bank Address
A20 A19 A18 A17 A16 A15 A14 A13 A12 A11
Bank 2
SA37011110XXXX1E0000H to 1EFFFFH 0F0000H to 0F7FFFH
SA38011111XXXX1F0000H to 1FFFFFH 0F8000H to 0FFFFFH
SA39100000XXXX200000H to 20FFFFH 100000H to 107FFFH
SA40100001XXXX210000H to 21FFFFH 108000H to 10FFFFH
SA41100010XXXX220000H to 22FFFFH 110000H to 117FFFH
SA42100011XXXX230000H to 23FFFFH 118000H to 11FFFFH
SA43100100XXXX240000H to 24FFFFH 120000H to 127FFFH
SA44100101XXXX250000H to 25FFFFH 128000H to 12FFFFH
SA45100110XXXX260000H to 26FFFFH 130000H to 137FFFH
SA46100111XXXX270000H to 27FFFFH 138000H to 13FFFFH
SA47101000XXXX280000H to 28FFFFH 140000H to 147FFFH
SA48101001XXXX290000H to 29FFFFH 148000H to 14FFFFH
SA49101010XXXX2A0000H to 2AFFFFH 150000H to 157FFFH
SA50101011XXXX2B0000H to 2BFFFFH 158000H to 15FFFFH
SA51101100XXXX2C0000H to 2CFFFFH 160000H to 167FFFH
SA52101101XXXX2D0000H to 2DFFFFH 168000H to 16FFFFH
SA53101110XXXX2E0000H to 2EFFFFH 170000H to 177FFFH
SA54101111XXXX2F0000H to 2FFFFFH 178000H to 17FFFFH
SA55110000XXXX300000H to 30FFFFH 180000H to 187FFFH
SA56110001XXXX310000H to 31FFFFH 188000H to 18FFFFH
SA57110010XXXX320000H to 32FFFFH 190000H to 197FFFH
SA58110011XXXX330000H to 33FFFFH 198000H to 19FFFFH
SA59110100XXXX340000H to 34FFFFH 1A0000H to 1A7FFFH
SA60110101XXXX350000H to 35FFFFH 1A8000H to 1AFFFFH
SA61110110XXXX360000H to 36FFFFH 1B0000H to 1B7FFFH
SA62110111XXXX370000H to 37FFFFH 1B8000H to 1BFFFFH
SA63111000XXXX380000H to 38FFFFH 1C0000H to 1C7FFFH
SA64111001XXXX390000H to 39FFFFH 1C8000H to 1CFFFFH
SA65111010XXXX3A0000H to 3AFFFFH 1D0000H to 1D7FFFH
SA66111011XXXX3B0000H to 3BFFFFH 1D8000H to 1DFFFFH
SA67111100XXXX3C0000H to 3CFFFFH 1E0000H to 1E7FFFH
SA68111101XXXX3D0000H to 3DFFFFH 1E8000H to 1EFFFFH
SA69111110XXXX3E0000H to 3EFFFFH 1F0000H to 1F7FFFH
SA70111111XXXX3F0000H to 3FFFFFH 1F8000H to 1FFFFFH
24
MB84VD2208XEA-90/MB84VD2209XEA-90
Table 2. 7 Sector Address Tables (MB84VD22084EA)
(Continued)
Bank Sector
Sector Address Address Range
(BYTE mode) Address Range
(WORD mode)
Bank Address
A20 A19 A18 A17 A16 A15 A14 A13 A12 A11
Bank 2
SA0 000000XXXX000000H to 00FFFFH 000000H to 007FFFH
SA1 000001XXXX010000H to 01FFFFH 008000H to 00FFFFH
SA2 000010XXXX020000H to 02FFFFH 010000H to 017FFFH
SA3 000011XXXX030000H to 03FFFFH 018000H to 01FFFFH
SA4 000100XXXX040000H to 04FFFFH 020000H to 027FFFH
SA5 000101XXXX050000H to 05FFFFH 028000H to 02FFFFH
SA6 000110XXXX060000H to 06FFFFH 030000H to 037FFFH
SA7 000111XXXX070000H to 07FFFFH 038000H to 03FFFFH
SA8 001000XXXX080000H to 08FFFFH 040000H to 047FFFH
SA9 001001XXXX090000H to 09FFFFH 048000H to 04FFFFH
SA10001010XXXX0A0000H to 0AFFFFH 050000H to 057FFFH
SA11001011XXXX0B0000H to 0BFFFFH 058000H to 05FFFFH
SA12001100XXXX0C0000H to 0CFFFFH 060000H to 067FFFH
SA13001101XXXX0D0000H to 0DFFFFH 068000H to 06FFFFH
SA14001110XXXX0E0000H to 0EFFFFH 070000H to 077FFFH
SA15001111XXXX0F0000H to 0FFFFFH 078000H to 07FFFFH
SA16010000XXXX100000H to 10FFFFH 080000H to 087FFFH
SA17010001XXXX110000H to 11FFFFH 088000H to 08FFFFH
SA18010010XXXX120000H to 12FFFFH 090000H to 097FFFH
SA19010011XXXX130000H to 13FFFFH 098000H to 09FFFFH
SA20010100XXXX140000H to 14FFFFH 0A0000H to 0A7FFFH
SA21010101XXXX150000H to 15FFFFH 0A8000H to 0AFFFFH
SA22010110XXXX160000H to 16FFFFH 0B0000H to 0B7FFFH
SA23010111XXXX170000H to 17FFFFH 0B8000H to 0BFFFFH
SA24011000XXXX180000H to 18FFFFH 0C0000H to 0C7FFFH
SA25011001XXXX190000H to 19FFFFH 0C8000H to 0CFFFFH
SA26011010XXXX1A0000H to 1AFFFFH 0D0000H to 0D7FFFH
SA27011011XXXX1B0000H to 1BFFFFH 0D8000H to 0DFFFFH
SA28011100XXXX1C0000H to 1CFFFFH 0E0000H to 0E7FFFH
SA29011101XXXX1D0000H to 1DFFFFH 0E8000H to 0EFFFFH
SA30011110XXXX1E0000H to 1EFFFFH 0F0000H to 0F7FFFH
SA31011111XXXX1F0000H to 1FFFFFH 0F8000H to 0FFFFFH
25
MB84VD2208XEA-90/MB84VD2209XEA-90
(Continued)
Bank Sector
Sector Address Address Range
(BYTE mode) Address Range
(WORD mode)
Bank Address
A20 A19 A18 A17 A16 A15 A14 A13 A12 A11
Bank 1
SA32100000XXXX200000H to 20FFFFH 100000H to 107FFFH
SA33100001XXXX210000H to 21FFFFH 108000H to 10FFFFH
SA34100010XXXX220000H to 22FFFFH 110000H to 117FFFH
SA35100011XXXX230000H to 23FFFFH 118000H to 11FFFFH
SA36100100XXXX240000H to 24FFFFH 120000H to 127FFFH
SA37100101XXXX250000H to 25FFFFH 128000H to 12FFFFH
SA38100110XXXX260000H to 26FFFFH 130000H to 137FFFH
SA39100111XXXX270000H to 27FFFFH 138000H to 13FFFFH
SA40101000XXXX280000H to 28FFFFH 140000H to 147FFFH
SA41101001XXXX290000H to 29FFFFH 148000H to 14FFFFH
SA42101010XXXX2A0000H to 2AFFFFH 150000H to 157FFFH
SA43101011XXXX2B0000H to 2BFFFFH 158000H to 15FFFFH
SA44101100XXXX2C0000H to 2CFFFFH 160000H to 167FFFH
SA45101101XXXX2D0000H to 2DFFFFH 168000H to 16FFFFH
SA46101110XXXX2E0000H to 2EFFFFH 170000H to 177FFFH
SA47101111XXXX2F0000H to 2FFFFFH 178000H to 17FFFFH
SA48110000XXXX300000H to 30FFFFH 180000H to 187FFFH
SA49110001XXXX310000H to 31FFFFH 188000H to 18FFFFH
SA50110010XXXX320000H to 32FFFFH 190000H to 197FFFH
SA51110011XXXX330000H to 33FFFFH 198000H to 19FFFFH
SA52110100XXXX340000H to 34FFFFH 1A0000H to 1A7FFFH
SA53110101XXXX350000H to 35FFFFH 1A8000H to 1AFFFFH
SA54110110XXXX360000H to 36FFFFH 1B0000H to 1B7FFFH
SA55110111XXXX370000H to 37FFFFH 1B8000H to 1BFFFFH
SA56111000XXXX380000H to 38FFFFH 1C0000H to 1C7FFFH
SA57111001XXXX390000H to 39FFFFH 1C8000H to 1CFFFFH
SA58111010XXXX3A0000H to 3AFFFFH 1D0000H to 1D7FFFH
SA59111011XXXX3B0000H to 3BFFFFH 1D8000H to 1DFFFFH
SA60111100XXXX3C0000H to 3CFFFFH 1E0000H to 1E7FFFH
SA61111101XXXX3D0000H to 3DFFFFH 1E8000H to 1EFFFFH
SA62111110XXXX3E0000H to 3EFFFFH 1F0000H to 1F7FFFH
SA63111111000X3F0000H to 3F1FFFH 1F8000H to 1F8FFFH
SA64111111001X3F2000H to 3F3FFFH 1F9000H to 1F9FFFH
SA65111111010X3F4000H to 3F5FFFH 1FA000H to 1FAFFFH
SA66111111011X3F6000H to 3F7FFFH 1FB000H to 1FBFFFH
SA67111111100X3F8000H to 3F9FFFH 1FC000H to 1FCFFFH
SA68111111101X3FA000H to 3FAFFFH 1FD000H to 1FDFFFH
SA69111111110X3FC000H to 3FCFFFH 1FE000H to 1FEFFFH
SA70111111111X3FE000H to 3FFFFFH 1FF000H to 1FFFFFH
26
MB84VD2208XEA-90/MB84VD2209XEA-90
Table 2. 8 Sector Address Tables (MB84VD22094EA)
(Continued)
Bank Sector
Sector Address Address Range
(BYTE mode) Address Range
(WORD mode)
Bank Address
A20 A19 A18 A17 A16 A15 A14 A13 A12 A11
Bank 1
SA0 000000000X000000H to 001FFFH 000000H to 000FFFH
SA1 000000001X002000H to 003FFFH 001000H to 001FFFH
SA2 000000010X004000H to 005FFFH 002000H to 002FFFH
SA3 000000011X006000H to 007FFFH 003000H to 003FFFH
SA4 000000100X008000H to 009FFFH 004000H to 004FFFH
SA5 000000101X00A000H to 00BFFFH 005000H to 005FFFH
SA6 000000110X00C000H to 00DFFFH 006000H to 006FFFH
SA7 000000111X00E000H to 00FFFFH 007000H to 007FFFH
SA8 000001XXXX010000H to 01FFFFH 008000H to 00FFFFH
SA9 000010XXXX020000H to 02FFFFH 010000H to 017FFFH
SA10000011XXXX030000H to 03FFFFH 018000H to 01FFFFH
SA11000100XXXX040000H to 04FFFFH 020000H to 027FFFH
SA12000101XXXX050000H to 05FFFFH 028000H to 02FFFFH
SA13000110XXXX060000H to 06FFFFH 030000H to 037FFFH
SA14000111XXXX070000H to 07FFFFH 038000H to 03FFFFH
SA15001000XXXX080000H to 08FFFFH 040000H to 047FFFH
SA16001001XXXX090000H to 09FFFFH 048000H to 04FFFFH
SA17001010XXXX0A0000H to 0AFFFFH050000H to 057FFFH
SA18001011XXXX0B0000H to 0BFFFFH058000H to 05FFFFH
SA19001100XXXX0C0000H to 0CFFFFH 060000H to 067FFFH
SA20001101XXXX0D0000H to 0DFFFFH 068000H to 06FFFFH
SA21001110XXXX0E0000H to 0EFFFFH070000H to 077FFFH
SA22001111XXXX0F0000H to 0FFFFFH 078000H to 07FFFFH
SA23010000XXXX100000H to 10FFFFH 080000H to 087FFFH
SA24010001XXXX110000H to 11FFFFH 088000H to 08FFFFH
SA25010010XXXX120000H to 12FFFFH 090000H to 097FFFH
SA26010011XXXX130000H to 13FFFFH 098000H to 09FFFFH
SA27010100XXXX140000H to 14FFFFH 0A0000H to 0A7FFFH
SA28010101XXXX150000H to 15FFFFH 0A8000H to 0AFFFFH
SA29010110XXXX160000H to 16FFFFH 0B0000H to 0B7FFFH
SA30010111XXXX170000H to 17FFFFH 0B8000H to 0BFFFFH
SA31011000XXXX180000H to 18FFFFH 0C0000H to 0C7FFFH
SA32011001XXXX190000H to 19FFFFH 0C8000H to 0CFFFFH
SA33011010XXXX1A0000H to 1AFFFFH0D0000H to 0D7FFFH
SA34011011XXXX1B0000H to 1BFFFFH0D8000H to 0DFFFFH
SA35011100XXXX1C0000H to 1CFFFFH 0E0000H to 0E7FFFH
27
MB84VD2208XEA-90/MB84VD2209XEA-90
(Continued)
Bank Sector
Sector Address Address Range
(BYTE mode) Address Range
(WORD mode)
Bank Address
A20 A19 A18 A17 A16 A15 A14 A13 A12 A11
Bank 1 SA36011101XXXX1D0000H to 1DFFFFH 0E8000H to 0EFFFFH
SA37011110XXXX1E0000H to 1EFFFFH 0F0000H to 0F7FFFH
SA38011111XXXX1F0000H to 1FFFFFH 0F8000H to 0FFFFFH
Bank 2
SA39100000XXXX200000H to 20FFFFH 100000H to 107FFFH
SA40100001XXXX210000H to 21FFFFH 108000H to 10FFFFH
SA41100010XXXX220000H to 22FFFFH 110000H to 117FFFH
SA42100011XXXX230000H to 23FFFFH 118000H to 11FFFFH
SA43100100XXXX240000H to 24FFFFH 120000H to 127FFFH
SA44100101XXXX250000H to 25FFFFH 128000H to 12FFFFH
SA45100110XXXX260000H to 26FFFFH 130000H to 137FFFH
SA46100111XXXX270000H to 27FFFFH 138000H to 13FFFFH
SA47101000XXXX280000H to 28FFFFH 140000H to 147FFFH
SA48101001XXXX290000H to 29FFFFH 148000H to 14FFFFH
SA49101010XXXX2A0000H to 2AFFFFH 150000H to 157FFFH
SA50101011XXXX2B0000H to 2BFFFFH 158000H to 15FFFFH
SA51101100XXXX2C0000H to 2CFFFFH 160000H to 167FFFH
SA52101101XXXX2D0000H to 2DFFFFH 168000H to 16FFFFH
SA53101110XXXX2E0000H to 2EFFFFH 170000H to 177FFFH
SA54101111XXXX2F0000H to 2FFFFFH 178000H to 17FFFFH
SA55110000XXXX300000H to 30FFFFH 180000H to 187FFFH
SA56110001XXXX310000H to 31FFFFH 188000H to 18FFFFH
SA57110010XXXX320000H to 32FFFFH 190000H to 197FFFH
SA58110011XXXX330000H to 33FFFFH 198000H to 19FFFFH
SA59110100XXXX340000H to 34FFFFH 1A0000H to 1A7FFFH
SA60110101XXXX350000H to 35FFFFH 1A8000H to 1AFFFFH
SA61110110XXXX360000H to 36FFFFH 1B0000H to 1B7FFFH
SA62110111XXXX370000H to 37FFFFH 1B8000H to 1BFFFFH
SA63111000XXXX380000H to 38FFFFH 1C0000H to 1C7FFFH
SA64111001XXXX390000H to 39FFFFH 1C8000H to 1CFFFFH
SA65111010XXXX3A0000H to 3AFFFFH 1D0000H to 1D7FFFH
SA66111011XXXX3B0000H to 3BFFFFH 1D8000H to 1DFFFFH
SA67111100XXXX3C0000H to 3CFFFFH 1E0000H to 1E7FFFH
SA68111101XXXX3D0000H to 3DFFFFH 1E8000H to 1EFFFFH
SA69111110XXXX3E0000H to 3EFFFFH 1F0000H to 1F7FFFH
SA70111111XXXX3F0000H to 3FFFFFH 1F8000H to 1FFFFFH
28
MB84VD2208XEA-90/MB84VD2209XEA-90
Table 3. 1 Sector Group Addresses (MB84VD2208XEA)
(Top Boot Block)
Sector Group A20 A19 A18 A17 A16 A15 A14 A13 A12 Sectors
SGA0 000000XXX SA0
SGA1 0000
01
XXXSA1 to SA310
11
SGA2 0001XXXXXSA4 to SA7
SGA3 0010XXXXXSA8 to SA11
SGA4 0011XXXXXSA12 to SA15
SGA5 0100XXXXXSA16 to SA19
SGA6 0101XXXXXSA20 to SA23
SGA7 0110XXXXXSA24 to SA27
SGA8 0111XXXXXSA28 to SA31
SGA9 1000XXXXXSA32 to SA35
SGA10 1001XXXXXSA36 to SA39
SGA11 1010XXXXXSA40 to SA43
SGA12 1011XXXXXSA44 to SA47
SGA13 1100XXXXXSA48 to SA51
SGA14 1101XXXXXSA52 to SA55
SGA15 1110XXXXXSA56 to SA59
SGA16 1 1 1 1
00
X X X SA60 to SA6201
10
SGA17 111111000 SA63
SGA18 111111001 SA64
SGA19 111111010 SA65
SGA20 111111011 SA66
SGA21 111111100 SA67
SGA22 111111101 SA68
SGA23 111111110 SA69
SGA24 111111111 SA70
29
MB84VD2208XEA-90/MB84VD2209XEA-90
Table 3. 2 Sector Group Addresses (MB84VD2209XEA)
(Bottom Boot Bloc k)
Sector Group A20 A19 A18 A17 A16 A15 A14 A13 A12 Sectors
SGA0 000000000 SA0
SGA1 000000001 SA1
SGA2 000000010 SA2
SGA3 000000011 SA3
SGA4 000000100 SA4
SGA5 000000101 SA5
SGA6 000000110 SA6
SGA7 000000111 SA7
SGA8 0000
01
X X X SA8 to SA1010
11
SGA9 0001XXXXXSA11 to SA14
SGA10 0010XXXXXSA15 to SA18
SGA11 0011XXXXXSA19 to SA22
SGA12 0100XXXXXSA23 to SA26
SGA13 0101XXXXXSA27 to SA30
SGA14 0110XXXXXSA31 to SA34
SGA15 0111XXXXXSA35 to SA38
SGA16 1000XXXXXSA39 to SA42
SGA17 1001XXXXXSA43 to SA46
SGA18 1010XXXXXSA47 to SA50
SGA19 1011XXXXXSA51 to SA54
SGA20 1100XXXXXSA55 to SA58
SGA21 1101XXXXXSA59 to SA62
SGA22 1110XXXXXSA63 to SA66
SGA23 1 1 1 1
00
X X X SA67 to SA6901
10
SGA24 111111XXX SA70
30
MB84VD2208XEA-90/MB84VD2209XEA-90
Table 4 Flash Memory Autoselect Codes
*1: A–1 is for Byte mode.
*2: Output 01H at protected sector address and output 00H at unprotected sector address.
Type A12 to A19 A6A1A0A–1*1Code (HEX)
Manufacturer’s Code X VIL VIL VIL VIL 04H
Device
Code
MB84VD22081EA Byte XV
IL VIL VIH VIL 59H
Word X 2259H
MB84VD22091EA Byte XV
IL VIL VIH VIL 5AH
Word X 225AH
MB84VD22082EA Byte XV
IL VIL VIH VIL 55H
Word X 2255H
MB84VD22092EA Byte XV
IL VIL VIH VIL 56H
Word X 2256H
MB84VD22083EA Byte XV
IL VIL VIH VIL 50H
Word X 2250H
MB84VD22093EA Byte XV
IL VIL VIH VIL 53H
Word X 2253H
MB84VD22084EA Byte XV
IL VIL VIH VIL 5CH
Word X 225CH
MB84VD22094EA Byte XV
IL VIL VIH VIL 5FH
Word X 225FH
Sector Group protect Sector Group
Address VIL VIH VIL VIL 01H*2
31
MB84VD2208XEA-90/MB84VD2209XEA-90
Notes:1: Both Read/Reset commands are functionally equivalent, resetting the device to the read mode.
2: This command is valid while Fast Mode.
3: This command is valid while RESET=VID.
(Continued)
Table 5 Flash Memory Command Definitions
Command
Sequence
Bus
Write
Cycles
Req’d
First Bus
Write Cycle Second Bus
Write Cycle Third Bus
Write Cycle Fourth Bus
Read/Write
Cycle Fifth Bus
Write Cycle Sixth Bus
Write Cycle
Addr. Data Addr. Data Addr. Data Addr. Data Addr. Data Addr. Data
Read/Reset (Note 1) 1 XXXH F0H — — — — — — — — — —
Read/Reset
(Note 1) Word 3555H AAH 2AAH 55H 555H F0H RA RD — — — —
Byte AAAH 555H AAAH
Autoselect Word 3555H AAH 2AAH 55H
(BA)
555H 90H — — — — — —
Byte AAAH 555H (BA)
AAAH
Program Word 4555H AAH 2AAH 55H 555H A0H PA PD — — — —
Byte AAAH 555H AAAH
Chip Erase Word 6555H AAH 2AAH 55H 555H 80H 555H AAH 2AAH 55H 555H 10H
Byte AAAH 555H AAAH AAAH 555H AAAH
Sector Erase Word 6555H AAH 2AAH 55H 555H 80H 555H AAH 2AAH 55H SA 30H
Byte AAAH 555H AAAH AAAH 555H
Sector Erase
Suspend 1 BAB0H— — — ———————
Sector Erase
Resume 1 BA30H— — — ———————
Set to
Fast Mode Word 3555H AAH 2AAH 55H 555H 20H — — — — — —
Byte AAAH 555H AAAH
Fast Program
(Note 2) Word 2 XXXH A0H PA PD — — — — — — — —
Byte
Reset from
Fast Mode
(Note 2)
Word 2 BA 90H XXXH F0H
(Note6) — ———————
Byte
Extended
Sector Group
Protection
(Note 3)
Word 4 XXXH 60H SPA 60H SPA 40H SPA SD — — — —
Byte
Query
(Note 4) Word 155H 98H— — — ———————
Byte AAH
Hi-ROM Entry Word 3555H AAH 2AAH 55H 555H 88H — — — — — —
Byte AAAH 555H AAAH
Hi-ROM
Program
(Note 5)
Word 4555H AAH 2AAH 55H 555H A0H PA PD — — — —
Byte AAAH 555H AAAH
Hi-ROM
Erase
(Note 5)
Word 6555H AAH 2AAH 55H 555H 80H 555H AAH 2AAH 55H HRA 30H
Byte AAAH 555H AAAH AAAH 555H
Hi-ROM Exit
(Note 5)
Word 4555H AAH 2AAH 55H
(HRBA)
555H 90H XXXH 00H — — — —
Byte AAAH 555H (HRBA)
AAAH
32
MB84VD2208XEA-90/MB84VD2209XEA-90
(Continued)
4: The valid Address is A0 to A6.
5: This command is valid while Hi-ROM mode.
6: The data "00H" is also acceptable.
Address bits A11 to A20 = X = “H” or “L” for all address commands except for Program Address (PA),
Sector Address (SA),and Bank Address (BA).
Bus operations are defined in Table 2 "User Bus Operations".
RA = Address of the memory location to be read.
PA = Address of the memory location to be programmed.
Addresses are latched on the falling edge of the write pulse.
SA = Address of the sector to be erased. The combination of A20, A19, A18, A17, A16, A15, A14, A13, and A12 will
uniquely select any sector.
BA = Bank address (A15 to A20)
SPA = Sector group address to be protected. Set sector group address (SGA) and (A6, A1, A0) = (0, 1, 0).
HRA= Address of the Hidden-ROM area.
MB84VD2208XEA (Top Boot Type) Word mode: 1F8000H to 1FFFFFH
Byte mode: 3F0000H to 3FFFFFH
MB84VD2209XEA (Bottom Boot Type) Word mode: 000000H to 007FFFH
Byte mode: 000000H to 00FFFFH
HRBA = Bank address of the Hidden-R OM area
MB84VD2208XEA (Top Boot Type) : A15 = A16 = A17 = A18 = A19 = A20 = 1
MB84VD2209XEA (Bottom Boot Type) : A15 = A16 = A17 = A18 = A19 = A20 = 0
RD = Data read from location RA during read operation.
PD = Data to be progra mmed at location PA.
SD = Sector protection verify data. Output 01H at protected sector addresses and output 00H
at unprotectedsector addresses.
The system should generate the following address patterns;
Word mode: 555H or 2AAH to addresses A0 to A10
Byte mode : AAAH or 555H to addresses A–1 and A0 to A10
33
MB84VD2208XEA-90/MB84VD2209XEA-90
■ABSOLUTE MAXIMUM RATINGS
WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current,
temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
Notes: 1. Minimum DC voltage on input or I/O pins is –0.3 V. Dur ing voltage transitions, input or I/O pins may
undershoot VSS to –2.0 V for periods of up to 20 ns. Maximum DC voltage on input or I/O pins is VCCf
+0.4 V or VCCs+0.4 V. During voltage transitions, input or I/O pins may overshoot to VCCf+2.0 V or
VCCs+2.0 V for periods of up to 20 ns.
2. Minimum DC input voltage on A9 and OE pin is –0.3 V. Minimum DC input voltage on RESET pin is
–0.5 V. During voltage transitions, A9, OE, and RESET pins may undershoot VSS to –2.0 V for periods
of up to 20 ns.
Voltage difference betw een input and supply voltage (VIN-VCCf or VCCs) does not exceed 9.0 V.
Maximum DC input voltage on A9, OE, and RESET pins is +13.0 V which may o vershoot to 14.0 V f or
periods of up to 20 ns.
3. Minimum DC input voltage on WP/ACC pin is –0.5 V. During voltage transitions, WP/ACC pin may
undershoot Vss to –2.0 V for per iods of up to 20 ns. Maximum DC input voltage on WP/ACC pin is
+10.5 V which may overshoot to 12.0 V for periods of up to 20 ns, when VCCf is applied.
■RECOMMENDED OPERATING RANGES
Note: Operating ranges define those limits between which the functionality of the device is guaranteed.
WARNING: The recommended operating conditions are required in order to ensure the normal operation of the
semiconductor device. All of the device’s electrical characteristics are warranted when the device is
operated within these ranges.
Always use semiconductor devices within their recommended operating condition ranges. Operation
outside these ranges may adversely affect reliability and could result in device failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented on
the data sheet. Users considering application outside the listed conditions are advised to contact their
FUJITSU representatives beforehand.
Parameter Symbol Rating Unit
Min. Max.
Storage Temperature Tstg –55 +125 °C
Ambient Temperature with Power Applied TA–25 +85 °C
Voltage with Respect to Ground All pins
except A9, OE, RESET, WP/ACC (Note 1) VIN, VOUT –0.3 VCCf +0.4 V
VCCs +0.4 V
VCCf/VCCs Supply (Note 1) VCCf, VCCs –0.3 +4.0 V
A9 and OE (Note 2) VIN –0.3 +13.0 V
RESET(Note 2) VIN –0.5 +13.0 V
WP/ACC(Note 3) VIN –0.5 +10.5 V
Parameter Symbol Value Unit
Min. Max.
Ambient Temperature Ta –25 +85 °C
VCCf/VCCs Supply Voltages VCCf, VCCs+2.7 +3.3 V
34
MB84VD2208XEA-90/MB84VD2209XEA-90
■ELECTRICAL CHRACTERISTICS
1.DC Characteristics
(Continued)
Parameter
Symbol Parameter Description Test Conditions Min. Typ. Max. Unit
ILI Input Leakage Current VIN = VSS to VCCf, VCCs –1.0 — +1.0 µA
ILO Output Leakage Current VOUT = VSS to VCCf, VCCs –1.0 — +1.0 µA
ILIT RESET Inputs Leakage
Current
VCCf = VCCf Max.,
VCCs = VCCs Max.,
RESET = 12.5V — — 35 µA
ILIA ACC Input Leakage
Current
VCCf = VCCf Max.,
VCCs = VCCs Max.,
WP/ACC = VACC Max. ——20mA
ICC1fFlash VCC Active Current
(Read)
(Note 1) CEf = VIL,
OE = VIH
tCYCLE = 5 MHz Byte — — 16 mA
tCYCLE = 5 MHz W ord — — 18
tCYCLE = 1 MHz Byte — — 7 mA
tCYCLE = 1 MHz W ord — — 7
ICC2fFlash VCC Active Current
(Program/Erase) (Note 2) CEf = VIL, OE = VIH ——35mA
ICC3fFlash VCC Active Current
(Read-While-Program)
(Note 5) CEf = VIL, OE = VIH Byte — — 51 mA
Word — — 53
ICC4fFlash VCC Active Current
(Read-While-Erase)
(Note 5) CEf = VIL, OE = VIH Byte — — 51 mA
Word — — 53
ICC5fFlash VCC Active Current
(Erase-Suspend-Program) CEf = VIL, OE = VIH ——35mA
ICC1sSRAM V
CC Active Current VCCs = VCC Max.,
CE1s = VIL,
CE2s = VIH
tCYCLE =10 MHz — — 40 mA
ICC2sSRAM V
CC Active Current CE1s = 0.2 V,
CE2s = VCCs – 0.2 V tCYCLE = 10 MHz — — 40 mA
tCYCLE = 1 MHz — — 8 mA
ISB1fFlash V
CC Standb y Current VCCf = VCC Max., CEf = VCCf ± 0.3 V
RESET = VCCf ± 0.3 V,
WP/ACC = VCCf± 0.3 V —15µA
ISB2fFlash VCC Standby Current
(RESET)VCCf = VCC Max., RESET = VSS ± 0.3 V,
WP/ACC = VCCf± 0.3 V —15µA
ISB3fFlash VCC Current
(Automatic Sleep Mode)
(Note 3)
VCCf = VCC Max., CEf = VSS ± 0.3 V
RESET = VCCf ± 0.3 V,
WP/ACC = VCCf± 0.3 V
VIN = VCCf ± 0.3 V or VSS ± 0.3 V
—15µA
ISBsSRAM V
CC Standby Current 1) CE1s = VIH, CE2s = VIH
2) CE2s=VIL ——0.6mA
35
MB84VD2208XEA-90/MB84VD2209XEA-90
(Continued)
* :VCC indicates lower of VCCf or VCCs
Notes: 1. The ICC current listed includes both the DC operating current and the frequency dependent component.
2. ICC active while Embedded Algorithm (program or erase) is in progress.
3. Automatic sleep mode enables the low power mode when address remain stable for 150 ns.
4. Applicable for only VCCf applying.
5. Embedded Algorithm (program or erase) is in progress. (@5MHz)
Parameter
Symbol Parameter Description Test Conditions Min. Typ. Max. Unit
ISB1sSRAM V
CC Standby Current CE1s > VCCs – 0.2V, CE2s > VCCs – 0.2V — 0.2 7 µA
ISB2sSRAM V
CC Standby Current CE2s < 0.2V — 0.2 7 µA
VIL Input Low Level — –0.3 — 0.5 V
VIH Input High Level — 2.4 — VCC+0.3* V
VID
Voltage for Sector
Protection, and Temporary
Sector Unprotection
(RESET) (Note 4)
— 11.5 — 12.5 V
VACC
Voltage for Program
Acceleration (WP/ACC)
(Note4) —8.59.09.5V
VOL Output Low Voltage Level VCCf = VCCf Min.,VCCs = VCCs Min.,
IOL=1.0mA ——0.4V
VOH Output High Voltage Level VCCf = VCCf Min.,VCCs = VCCs Min.,
IOH=-0.5mA 2.4 — — V
VLKO Flash Low VCCf Lock-Out
Voltage —2.3—2.5V
36
MB84VD2208XEA-90/MB84VD2209XEA-90
2. AC Characteristics
•CE Timing
• Timing Diagram for alternating SRAM to Flash
• Read Only Operations Characteristics (Flash)
Note: Test Conditions–Output Load:1 TTL gate and 30 pF
Input rise and fall times: 5 ns
Input pulse levels: 0.0 V to 3.0 V
Timing measurement reference level
Input: 1.5 V
Output: 1.5 V
Parameter
Symbols Description Test Setup -90 Unit
JEDEC Standard
—t
CCR CE Recover Time — Min. 0 ns
Parameter Symbols Description Test Setup -90 (Note) Unit
JEDEC Standard Min. Max.
tAVAV tRC Read Cycle Time — 90 — ns
tAVQV tACC Address to Output Delay CEf = VIL
OE = VIL —90ns
tELQV tCEf Chip Enable to Output Delay OE = VIL —90ns
tGLQV tOE Output Enable to Output Delay — — 40 ns
tEHQZ tDF Chip Enable to Output High-Z — — 30 ns
tGHQZ tDF Output Enable to Output High-Z — — 30 ns
tAXQX tOH Output Hold Time From Addresses,
CEf or OE, Whichever Occurs First —0—ns
—t
READY RESET Pin Low to Read Mode — — 20 µs
tCCR
tCCR
tCCR
tCCR
CEf
CE1s
CE2s
37
MB84VD2208XEA-90/MB84VD2209XEA-90
• Read Cycle (Flash)
ADDRESSES
CEf
OE
WE
DQ Output Valid
Addresses Stable
tRC
tACC
tOE tDF
tCEf
HIGH-Z HIGH-Z
ADDRESSES
RESET
DQ Output Valid
Addresses Stable
tRC
tACC
tOH
tRP tRH tCEf
tRH
HIGH-Z
tOEH
CEf
38
MB84VD2208XEA-90/MB84VD2209XEA-90
• Erase/Program Operations (Flash)
(Continued)
Parameter Symbols Description -90 Unit
JEDEC Standard Min. Typ. Max.
tAVAV tWC Write Cycle Time 90 — — ns
tAVWL tAS Address Setup Time (WE to Addr.) 0 — — ns
—t
ASO Address Setup Time to CE Low During Toggle Bit Polling 15 — — ns
tWLAX tAH Address Hold Time (WE to Addr.) 45 — — ns
—t
AHT Address Hold Time from CE or OE High During Toggle Bit
Polling 0——ns
tDVWH tDS Data Setup Time 35 — — ns
tWHDX tDH Data Hold Time 0 — — ns
—t
OES Output Enable Setup Time 0 — — ns
—tOEH Output Enable Hold Time Read 0 — — ns
Toggle and Data Polling 10 — — ns
—t
CEPH CE High During Toggle Bit Polling 20 — — ns
—t
OEPH OE High During Toggle Bit Polling 20 — — ns
tGHEL tGHEL Read Recover Time Before Write (OE to CEf) 0 — — ns
tGHWL tGHWL Read Recover Time Before Write (OE to WE)0——ns
tWLEL tWS WE Setup Time (CEf to WE)0——ns
tELWL tCS CEf Setup Time (WE to CEf) 0 — — ns
tEHWH tWH WE Hold Time (CEf to WE)0——ns
tWHEH tCH CEf Hold Time (WE to CEf) 0 — — ns
tWLWH tWP Write Pulse Width 35 — — ns
tELEH tCP CEf Pulse Width 35 — — ns
tWHWL tWPH Write Pulse Width High 30 — — ns
tEHEL tCPH CEf Pulse Width High 30 — — ns
tWHWH1 tWHWH1 Byte Programming Operation — 8 — µs
Word Programming Operation — 16 — µs
tWHWH2 tWHWH2 Sector Erase Operation (Note 1) — 1 — s
—t
VCS VCCf Setup Time 50 — — µs
—t
VLHT Voltage Transition Time (Note 2) 4 — — µs
—t
VIDR Rise Time to VID (Note 2) 500 — — ns
—t
VACCR Rise Time to VACC 500 — — ns
—t
RB Recover Time from RY/BY 0——ns
39
MB84VD2208XEA-90/MB84VD2209XEA-90
(Continued)
Notes:1.This does not include the preprogramming time.
2.This timing is for Sector Protection Operation.
3.The time between writes must be less than "tTOW" otherwise that command will not be accepted and
erasure will star t. A time-out or "tTOW" from the rising edge of last CE or WE whichever happens first will
initiate the execution of the Sector Erase command(s).
4.When the Erase Suspend command is written during the Sector Erase operation, the device will take a
maximum of "tSPD" to suspend the erase operation.
Parameter Symbols Description -90 Unit
JEDEC Standard Min. Typ. Max.
—tRP RESET Pulse Width 500 — — ns
—t
EOE Delay Time from Embedded Output Enable — — 90 ns
—t
RH RESET High Level Period Before Read 200 — — ns
—t
BUSY Program/Erase Valid to RY/BY Delay — — 90 ns
—t
TOW Erase Time-out Time (Note 3) 50 — — µs
—t
SPD Erase Suspend Transition Time (Note 4) — — 20 µs
40
MB84VD2208XEA-90/MB84VD2209XEA-90
• Write Cycle (WE control) (Flash)
ADDRESSES
WE
OE
CEf
DQ
3rd Bus Cycle
555H
A0H PD DQ7DOUT DOUT
PA PA
Data Polling
tWC
tCS
tWP
tDS
tDH
tOH
tOE
tCEf
tWPH tWHWH1
tGHWL
tCH
tAS tAH tRC
Notes: 1. PA is address of the memory location to be programmed.
2. PD is data to be programmed at byte address.
3. DQ7 is the output of the complement of the data written to the device.
4. DOUT is the output of the data written to the device.
5. Figure indicates last two bus cycles out of four bus cycle sequence.
6. These waveforms are for the ×16 mode. (The addresses differ from ×8 mode.)
41
MB84VD2208XEA-90/MB84VD2209XEA-90
• Write Cycle (CEf control) (Flash)
ADDRESSES
WE
OE
CEf
DQ
3rd Bus Cycle
555H
A0H PD DQ7DOUT
PA PA
Data Polling
tWC
tWS
tCP
tDS
tDH
tCPH tWHWH1
tGHEL
tWH
tAS tAH
Notes: 1. PA is address of the memory location to be programmed.
2. PD is data to be programmed at byte address.
3. DQ7 is the output of the complement of the data written to the device.
4. DOUT is the output of the data written to the device.
5. Figure indicates last two bus cycles out of four bus cycle sequence.
6.These waveforms are for the ×16 mode. (The addresses differ from ×8 mode.)
42
MB84VD2208XEA-90/MB84VD2209XEA-90
• AC Waveforms Chip/Sector Erase Operations (Flash)
555H 2AAH 2AAH555H 555H
tWC
tGHWL
tAS tAH
SA*
ADDRESSES
WE
OE
CEf
DQ
VCCf
tCS tCH
tVCS
tWPHtWP
tDS tDH
AAH 55H 80H AAH 55H 10H/
30H
30H for Sector Erase
Note: These waveform are for the ×16 mode. (The addresses differ from ×8 mode.)
*: SA is the sector address for Sector Erase. Addresses = 555H for Chip Erase.
43
MB84VD2208XEA-90/MB84VD2209XEA-90
• AC Waveforms for Data Polling during Embedded Algorithm Operations (Flash)
WE
OE
CEf
DQ7
DQ
(DQ0 to DQ6)
RY/BY
Data In
Data In
DQ7 =
Valid Data
DQ0 to DQ6
Valid Data
tEOE
DQ7
DQ0 to DQ6 = Output Flag
tCH tOE tDF
tOEH
tCEf
tWHWH1 or tWHWH2
High-Z
High-Z
*
tBUSY
* : DQ7 = Valid Data (The device has completed the Embedded operation.)
44
MB84VD2208XEA-90/MB84VD2209XEA-90
• AC Waveforms for Toggle Bit during Embedded Algorithm Operations (Flash)
WE
CEf
ADDRESSES
OE
DQ6/DQ2
Vccf
Data
tBUSY
tAHTtAHT tASO
tCEPH
tAS
tOEH tOEH
tCEf *
tDH tOE
tOEPH
Toggle
Data Toggle
Data Toggle
Data Stop
Toggling Output
Valid
* : DQ6 stops toggling (The device has completed the Embedded operation).
45
MB84VD2208XEA-90/MB84VD2209XEA-90
• Back-to-back Read/Write Timing Diagram (Flash)
ADDRESS
WE
OE
CEf
DQ
BA1 BA1 BA1
Read
Valid
Output
Valid
Output Valid
Intput Valid
Intput Valid
Output Status
BA2
(555H) BA2
(PA) BA2
(PA)
tDF
tDH
tDS
tOE
tGHWL
tAS
tAHT
tAS tACC
tCE
tWP
tRC
tCEPH
Read
tRC
Command
tWC
Read
tRC
Command
tWC
Read
tRC
tAH
tDF
(PD)(A0H)
tOEH
Note: This is e xample of Read f or Bank 1 and Embedded Algorithm (progr am) f or Bank 2.
BA1: Address of Bank 1.
BA2: Address of Bank 2.
46
MB84VD2208XEA-90/MB84VD2209XEA-90
•RY/BY Timing Diagram during Write/Erase Operations (Flash)
• RESET, RY/BY Timing Diagram (Flash)
The rising edge of the last write pulse
Entire programming
or erase operations
tBUSY
RY/BY
WE
CEf
RY/BY
RESET
WE
tREADY
tRP
tRB
47
MB84VD2208XEA-90/MB84VD2209XEA-90
• Temporary Sector Unprotection (Flash)
CEf
RY/BY
RESET
VCCf
3 V 3 V
WE
VID
Program or Erase Command Sequence
Unprotection Period
tVCS tVIDR tVLHT
tVLHT
tVLHT
48
MB84VD2208XEA-90/MB84VD2209XEA-90
• Extended Sector Protection (Flash)
VCCf
RESET
ADDRESS
A0
A1
A6
CEf
Data 60H 60H 40H 01H 60H
tVCS
tVIDR
tVLHT
TIME - OUT
tWP
tOE
SGAx SGAx SGAy
OE
WE
tWC tWC
SGAx : Sector Group Address to be protected
SGAy : Next Group Sector Address to be protected
TIME-OUT : Time-Out window = 250 µs (min)
49
MB84VD2208XEA-90/MB84VD2209XEA-90
• Accelerated Program (Flash)
CE
RY/BY
WP/ACC
VCCf
3 V
WE
VACC
Program or Erase Command Sequence
Acceleration period
tVCS tVACCR tVLHT
tVLHT
tVLHT
50
MB84VD2208XEA-90/MB84VD2209XEA-90
•Read Cycle (SRAM)
Parameter
Symbol Parameter Description Min. Max. Unit
tRC Read Cycle Time 85 — ns
tAA Address Access Time — 85 ns
tCO1 Chip Enable (CE1s) Access Time — 85 ns
tCO2 Chip Enable (CE2s) Access Time — 85 ns
tOE Output Enable Access Time — 45 ns
tBA LBs, UBs to Output Valid — 85 ns
tCOE Chip Enable (CE1s Low and CE2s High) to Output Active 5 — ns
tOEE Output Enable Low to Output Active 0 — ns
tBE UBs, LBs Enable Low to Output Active 0 — ns
tOD Chip Enab le (CE1s High or CE2s Low) to Output High-Z — 35 ns
tODO Output Enable High to Output High-Z — 35 ns
tBD UBs, LBs Output Enable to Output High-Z — 35 ns
tOH Output Data Hold Time 10 — ns
51
MB84VD2208XEA-90/MB84VD2209XEA-90
•Read Cycle (SRAM)
ADDRESSES
OE
CE2s
CE1s
LBS, UBS
DQ
tRC
tOH
tOD
tOD
tODO
tBD
tAA
tCO1
tCO2
tOE
tOEE
tBA
tBE
tCOE
tCOE
VALID DATA OUT
Note: WE remains HIGH for the read cycle.
52
MB84VD2208XEA-90/MB84VD2209XEA-90
• Write Cycle (SRAM)
Parameter
Symbol Parameter Description Min. Max. Unit
tWC Write Cycle Time 85 — ns
tWP Write Pulse Width 55 — ns
tCW Chip Enable to End of Write 70 — ns
tAW Address valid to End of Write 70 — ns
tBW UBs, LBs to End of Write 55 — ns
tAS Address Setup Time 0 — ns
tWR Write Recovery Time 0 — ns
tODW WE Low to Output High-Z — 35 ns
tOEW WE High to Output Active 0 — ns
tDS Data Setup Time 35 — ns
tDH Data Hold Time 0 — ns
53
MB84VD2208XEA-90/MB84VD2209XEA-90
• Write Cycle (Note 3) (WE control) (SRAM)
tWC
tAS tWP tWR
tAW
tCW
tCW
tBW
tODW
tDS tDH
tOEW
ADDRESSES
WE
CE1s
CE2s
DOUT
DIN
Note 1 Note 2
Note 4Note 4 VALID DATA IN
LBS, UBS
Notes:1. If CE1s goes LOW (or CE2s goes HIGH) coincident with or after WE goes LOW, the
output will remain at high impedance.
2. If CE1s goes HIGH (or CE2s goes LOW) coincident with or before WE goes HIGH, the
output will remain at high impedance.
3. If OE is HIGH during the write cycle, the outputs will remain at high impedance.
4. Because I/O signals may be in the output state at this time, input signals of reverse polarity
must not be applied.
54
MB84VD2208XEA-90/MB84VD2209XEA-90
• Write Cycle (Note 1) (CE1s control) (SRAM)
tWC
tAS tWP tWR
tAW
tCW
tCW
tBW
tODW
tDS tDH
tCOE
tBE
VALID DATA IN
ADDRESSES
WE
CE1s
CE2s
DOUT
DIN Note 2
LBS, UBS
Notes:1. If OE is HIGH during the write cycle, the outputs will remain at high impedance.
2. Because I/O signals may be in the output state at this time, input signals of reverse
polarity must not be applied.
55
MB84VD2208XEA-90/MB84VD2209XEA-90
• Write Cycle (Note 1) (CE2s Control) (SRAM)
ADDRESSES
WE
CE1s
CE2s
DOUT
DIN Note 2 VALID DATA IN
tDS
tODWtCOE
tBE
tBW
tCW
tCW
tWP
tWC
tAS tWR
tAW
tDH
LBS, UBS
Notes:1. If OE is HIGH during the write cycle, the outputs will remain at high impedance.
2. Because I/O signals may be in the output state at this time, input signals of reverse
polarity must not be applied.
56
MB84VD2208XEA-90/MB84VD2209XEA-90
• Write Cycle (Note 1) (LBs, UBs Control) (SRAM)
ADDRESSES
WE
CE1s
CE2s
DOUT
DIN VALID DATA IN
tDS
tODW
tCOE
tBE
tBWtAS
tAW
tCW
tCW
tWP
tWC
tWR
tDH
Note 2
LBS, UBS
Notes:1. If OE is HIGH during the write cycle, the outputs will remain at high impedance.
2. Because I/O signals may be in the output state at this time, input signals of reverse
polarity must not be applied.
57
MB84VD2208XEA-90/MB84VD2209XEA-90
■ERASE AND PROGRAMMING PERFORMANCE (Flash)
■DATA RETENTION CHARACTERISTICS (SRAM)
Note: tRC: Read cycle time
•CE1
s Controlled Data Retention Mode (Note 1)
Parameter Limits Unit Comment
Min. Typ. Max.
Sector Erase Time — 1 10 s Excludes programming time
prior to erasure
Byte Programming Time — 8 300 µsExcludes system-level
overhead
Word Programming Time — 16 360 µsExcludes system-level
overhead
Chip Programming Time — — 100 s Excludes system-level
overhead
Erase/Program Cycle 100,000 — — cycle
Parameter
Symbol Parameter Description Min. Typ. Max. Unit
VDH Data Retention Supply Voltage 1.5 — 3.3 V
IDDS2 Standby Current VDH = 3.0 V — 0.2 7 µA
tCDR Chip Deselect to Data Retention Mode Time 0 — — ns
tRRecovery Time tRC ——ns
DATA RETENTION MODE
See Note 2See Note 2
tRtCDR VCCS −0.2 V
VCCs
VIH
VDH
CE1s
2.7 V
GND
58
MB84VD2208XEA-90/MB84VD2209XEA-90
• CE2s Controlled Data Retention Mode (Note 3)
Notes:1.In CE1s controlled data retention mode, input level of CE2s should be fixed Vccs to Vccs – 0.2 V or Vss
to 0.2 V during data retention mode. Other input and input/output pins can be used between –0.3 V to
Vccs +0.3 V.
2. When CE1s is operating at the VIH min. level (2.2 V), the standby current is given by ISB1s during the
transition of VCCs from 3.6 to 2.2 V.
3. In CE2s controlled data retention mode, input and input/output pins can be used between –0.3 V to
Vccs + 0.3 V.
■PIN CAPACITANCE
Note: Test conditions Ta = 25°C, f = 1.0 MHz
■HANDLING OF PACKAGE
Please handle this package carefully since the sides of packages are right angle.
■CAUTION
1) The high voltage (VID) can not apply to address pins and control pins except RESET. Therefore, it can not
use autoselect and sector protect function by applying the high voltage (VID) to specific pins.
2) For the sector protection, since the high voltage (VID) can be applied to the RESET, it can be protected the
sector useing “Extended sector protect” command.
Parameter
Symbol Parameter Description Test Setup Typ. Max. Unit
CIN Input Capacitance VIN = 0 11 14 pF
COUT Output Capacitance V OUT = 0 12 16 pF
CIN2 Control Pin Capacitance VIN = 0 14 16 pF
CIN3 WP/ACC Pin Capacitance VIN = 0 21.5 26 pF
0.2 V
DATA RETENTION MODE
VCCs
CE2s
VDH
VIH
VIL
tCDR tR
GND
2.7 V
59
MB84VD2208XEA-90/MB84VD2209XEA-90
■ORDERING INFORMATION
MB84VD2208 X EA -90 -PBS
DEVICE NUMBER/DESCRIPTION
32Mega-bit (4M × 8-bit or 2M × 16-bit) Dual Operation Flash Memory
3.0 V-only Read, Program, and Erase
2Mega-bit(256K × 8-bit or 128K × 16-bit) SRAM
BOOT CODE SECTOR ARCHITECTURE
84VD2208 = Top sector
84VD2209 = Bottom sector
PACKAGE TYPE
PBS = 73-ball FBGA
SPEED OPTION
See Product Selector Guide
Device Revision
Bank Size
1 = 0.5Mbit / 31.5Mbit
2 = 4Mbit / 28Mbit
3 = 8Mbit / 24Mbit
4 = 16Mbit / 16Mbit
60
MB84VD2208XEA-90/MB84VD2209XEA-90
■PACKAGE DIMENSIONS
C
1999 FUJITSU LIMITED B73001S-1C-1
11.60±0.10(.457±.004) .049 –.004
+.006
–0.10
+0.15
1.25
(Mounting height)
0.38±0.10
(.015±.004) (Stand off)
1
2
3
4
5
6
7
8
9
10
ABCDEFGH
0.80(.031)
5.60(.220)REF
7.20(.283)
REF
5.60(.220)
INDEX BALL
73-Ø0.18 –.002
+.004
–0.05
+0.10
73-Ø0.45 M
0.08(.003)
0.10(.004)
INDEX-MARK AREA
8.00±0.10
(.315±.004)
7.20(.283)
JK
0.80(.031)
8.80(.346)
LM
Dimensions in mm (inches).
73-ball plastic FBGA
(BGA-73P-M01)
MB84VD2208XEA-90/MB84VD2209XEA-90
FUJITSU LIMITED
For further information please contact:
Japan
FUJITSU LIMITED
Corporate Global Business Support Division
Electronic Devices
KAWASAKI PLANT, 4-1-1, Kamikodanaka,
Nakahara-ku, Kawasaki-shi,
Kanagawa 211-8588, Japan
Tel: +81-44-754-3763
Fax: +81-44-754-3329
http://www.fujitsu.co.jp/
North and South America
FUJITSU MICROELECTRONICS, INC.
3545 North First Street,
San Jose, CA 95134-1804, U.S.A.
Tel: +1-408-922-9000
Fax: +1-408-922-9179
Customer Response Center
Mon. - Fri.: 7 am - 5 pm (PST)
Tel: +1-800-866-8608
Fax: +1-408-922-9179
http://www.fujitsumicro.com/
Europe
FUJITSU MICROELECTR ONICS EUR OPE GmbH
Am Siebenstein 6-10,
D-63303 Dreieich-Buchschlag,
Germany
Tel: +49-6103-690-0
Fax: +49-6103-690-122
http://www.fujitsu-fme.com/
Asia Pacific
FUJITSU MICROELECTR ONICS ASIA PTE. LTD .
#05-08, 151 Lorong Chuan,
New Tech Park,
Singapore 556741
Tel: +65-281-0770
Fax: +65-281-0220
http://www.fmap.com.sg/
Korea
FUJITSU MICROELECTR ONICS K OREA LTD .
1702 KOSMO TOWER, 1002 Daechi-Dong,
Kangnam-Gu,Seoul 135-280
Korea
Tel: +82-2-3484-7100
Fax: +82-2-3484-7111
F0007
FUJITSU LIMITED Printed in Japan
All Rights Reserved.
The contents of this document are subject to change without notice.
Customers are advised to consult with FUJITSU sales
representatives before ordering.
The information and circuit diagrams in this document are
presented as examples of semiconductor device applications, and
are not intended to be incorporated in devices for actual use. Also,
FUJITSU is unable to assume responsibility for infringement of
any patent rights or other rights of third parties arising from the use
of this information or circuit diagrams.
The contents of this document may not be reproduced or copied
without the permission of FUJITSU LIMITED.
FUJITSU semiconductor devices are intended for use in standard
applications (computers, office automation and other office
equipments, industrial, communications, and measurement
equipments, personal or household devices, etc.).
CAUTION:
Customers considering the use of our products in special
applications where failure or abnormal operation may directly
affect human lives or cause physical injury or property damage, or
where extremely high levels of reliability are demanded (such as
aerospace systems, atomic energy controls, sea floor repeaters,
vehicle operating controls, medical devices for life support, etc.)
are requested to consult with FUJITSU sales representatives before
such use. The company will not be responsible for damages arising
from such use without prior approval.
Any semiconductor devices have inherently a certain rate of failure.
You must protect against injury, damage or loss from such failures
by incorporating safety design measures into your facility and
equipment such as redundancy, fire protection, and prevention of
over-current levels and other abnormal operating conditions.
If any products described in this document represent goods or
technologies subject to certain restrictions on export under the
Foreign Exchange and Foreign Trade Control Law of Japan, the
prior authorization by Japanese government should be required for
export of those products from Japan.
