1
Power Entry Modules with Line Filter 5120
https://www.schurter.com /PG06
EMC Products
IEC Appliance Inlet C14 or C18 with Filter, ECO design, Front- or Rear Side Mounting
Front side mounting with plastic flange Snap-in mounting
Quick connect terminals 6.3 x 0.8 mm
Protection class II
Screw-on mounting
with wires (stranded)
See below:
Approvals and Compliances
C14
70° C
C18
70° C
Description
- Panel mount :
Screw-on version from front or rear side, snap-in version from front
side, PCB Version from rear side
- 2 Functions :
Appliance Inlet protection class I or II , Line filter in standard and medi-
cal version
- Solder, quick connect or wire (stranded)
- PCB Mounting
- Earth Terminal
Unique Selling Proposition
- Various variants
- Metal flange for optimal shielding
- Compact design
- Variants for protection class I and II
Characteristics
- Compact high performance filter
Optimal shielding due to completely closed filter case, unpotted
- Suitable for assembly in metal plated plastic housings
- Suitable for use in equipment according to IEC/UL 60950
Suitable for use in medical equipment according to IEC/UL 60601-1
Other versions on request
- Snap-in for panel thickness >2mm to 3mm
- flexible wire with various lenghts
- Class X1- and Y1-capacitors for enhanced withstand voltage
- Medical version M80
- Variant with notch for V-Lock mating Cordsets
References
Alternative: version without line filter 6100-3; 6100-4; 6102-3; 6102-5
Weblinks
pdf datasheet, html-datasheet, General Product Information, Distributor-
Stock-Check, Accessories, Detailed request for product, Landing Page
Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset.
The cord latching system prevents against accidental removal of the cordset.
Technical Data
Ratings IEC 1 - 10 A @ Ta 40 °C / 250 VAC; 50 Hz
Ratings UL/CSA 1 - 15 A @ Ta 40 °C / 250 VAC; 60 Hz
Leakage Current standard < 0.5 mA (250 V / 60 Hz)
medical < 5 µA (250 V / 60 Hz)
Dielectric Strength > 1.7 kVDC between L-N
> 2.7 kVDC between L/N-PE
Test voltage (2 sec)
Allowable Operation Tempe-
rature
-25 °C to 85 °C
Climatic Category 25/085/21 acc. to IEC 60068-1
IP-Protection from front side IP 40 acc. to IEC 60529
Protection Class Suitable for appliances with protection
class I or II acc. to IEC 61140
Terminal Quick connect terminals 6.3 x 0.8 mm
Solder terminals
Flexible wire AWG18 (15A AWG16),
150 mm
Panel Thickness S Screw with plastic flange: max 8 mm
Mounting screw torque max 0.5 Nm
Snap-in: 0.8 mm to 2 mm
(all steps with one variant)
Material: Housing Themoplast / steel tin-plated, black /
metallic, UL 94V-0
appliance inlet/-outlet C14 / C18 acc. to IEC 60320-1,
UL 498, CSA C22.2 no. 42 (for cold
conditions) pin-temperature 70 °C, 10 A,
Protection Class I or II
Line Filter Standard and Medical Version, IEC
60939, UL 1283, CSA C22.2 no. 8
Technical Details
MTBF > 3'000'000 h acc. to MIL-HB-217 F
Approvals and Compliances
Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about
Approvals
2
Power Entry Modules with Line Filter
5120 https://www.schurter.com /PG06
EMC Products
Approvals
The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.
Approval Reference Type: 5120
Approval Logo Certificates Certification Body Description
VDE Approvals VDE Certificate Number: 40016382
UL Approvals UL UL File Number: E72928
CQC Approvals CQC CQC File Number:
Product standards
Product standards that are referenced
Organization Design Standard Description
Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes
Designed according to IEC 60939 Passive filters for suppressing electromagnetic interference
Designed according to UL 498 Standard for Attachment Plugs and Receptacles
Designed according to UL 1283 Electromagnetic interference filters
Designed according to CSA C22.2 no. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices
Designed according to CSA C22.2 no. 8 Electromagnetic interference (EMI) filters
Application standards
Application standards where the product can be used
Organization Design Standard Description
Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information
technology equipment.
Designed for applications acc. IEC 60601-1 Medical electrical equipment - Part 1: General requirements for basic
safety and essential performance
Compliances
The product complies with following Guide Lines
Identification Details Initiator Description
CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable
requirements laid down in the harmonisation of Community legislation on
its affixing in accordance with EU Regulation 765/2008.
RoHS SCHURTER AG EU Directive RoHS 2011/65/EU
China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March
2007. It is similar to the EU directive RoHS.
REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration,
Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as
"REACH") entered into force.
SCHURTER AG V-Lock system are based on a matching plug-dose combination. The
connector is equipped with a notch intended for use with the latching
cordset. The cord latching system prevents against accidental removal of
the cordset.
Medical Equipment SCHURTER AG Suitable for use in medical equipment according to IEC/UL 60601-1
3
Power Entry Modules with Line Filter 5120
https://www.schurter.com /PG06
EMC Products
Dimensions [mm]
Front or rear side mounting for screws with nuts or blind rivets (panel cutout for frontside mounting)
12 2.9 1239.5
40
48.6
54.9
24.6
4.4
8.5
3.6
29±0.1
40
21.5
max.R3
±0.1
±0.10
M3
Front side mounting with plastic flange
12 2.9 1239.5
40
48.6
54.9
24.6
4.4
8.5
3.5
29±0.1
40
21.5
max.R3
±0.1
±0.10
M3
Rear side mounting with pre-formed, threaded holes for M3 screws (panel cutout for rear side mounting)
12 2.9 1239.5
40
48.6
24.6
4.4
M3
30.5±0.1
40
22.5
max.R3
±0.1
±0.10
3.6
Dimensions for class II version also apply to class I
4
Power Entry Modules with Line Filter
5120 https://www.schurter.com /PG06
EMC Products
Snap-in mounting from front side
12 2.9 1239.5
32.6
54.9
24.6
4.4
8.5
29.4
21.5
max.R1.5
±0.10
±0.10
Dimensions for class I version also apply class II
PCB snap-in rear side mounting, protection class II
2.9 1239.5
40
48.6 49.2
M3 26.2 2715.5
30.5
40
22.5
max.R3
±0.10
ø3.6
±0.10
±0.10 27±0.10
12±0.10
ø6
26.2 ±0.10 4.6 ±0.05
ø1.6+0.10
0
±0.05
4.6
5
Power Entry Modules with Line Filter 5120
https://www.schurter.com /PG06
EMC Products
PCB rear side mounting, protection class II
2.9 1239.5
40
48.6
M3 30.8 2715.5
30.5
40
22.5
max.R3
±0.10
ø3.6
±0.10
±0.10
12±0.10
30.8 ±0.10
ø1.6+0.10
0
Screw and snap-in mounting with flexible wire
2.9 1339.5
54.9
48.6
24.6
150 46.1
30.5
40
22.5
max.R3 max.R1.5
±0.10 29.4 ±0.10
ø3.6
±0.10
21.5±0.10
±0.10
8.5 1.25
29
40
21.5
max.R3
±0.10
M3
±0.10
±0.10
1) 2)
4)3) 5)
M3
40
1) Flexible wire, standard length 150 mm or special length on request
2) Nonexistent for protection class II
3) Panel cut-out screw-on version, back-side mounting
4) Panel cut-out screw-on version, front- or back-side mounting
5) Panel cut-out snap-in version, front-side mounting
6
Power Entry Modules with Line Filter
5120 https://www.schurter.com /PG06
EMC Products
Technical Data of Filter-Components
Rated Current
[A]
Filter-Type Inductances
L [mH]
Capacitance
CX [nF]
Capacitance
CY [nF]
R [MΩ]
1Standard Version 2 x 12 100 2.2 -
2Standard Version 2 x 5.2 100 2.2 -
4Standard Version 2 x 2 100 2.2 -
6Standard Version 2 x 0.8 100 2.2 -
10 Standard Version 2 x 0.4 100 2.2 -
15 Standard Version 2 x 0.1 100 2.2 -
1Medical Version (M5) 2 x 12 100 - 1
2Medical Version (M5) 2 x 5.2 100 - 1
4Medical Version (M5) 2 x 2 100 - 1
6Medical Version (M5) 2 x 0.8 100 - 1
10 Medical Version (M5) 2 x 0.4 100 - 1
15 Medical Version (M5) 2 x 0.1 100 - 1
1Bleed Resistor Version 2 x 12 100 2.2 1
2Bleed Resistor Version 2 x 5.2 100 2.2 1
4Bleed Resistor Version 2 x 2 100 2.2 1
6Bleed Resistor Version 2 x 0.8 100 2.2 1
10 Bleed Resistor Version 2 x 0.4 100 2.2 1
15 Bleed Resistor Version 2 x 0.1 100 2.2 1
Diagrams
Standard version
1)
2)
L
N
PE
L’
N’
PE’
L1
L2
R
Cx
Cy
Cy
1) Line
2) Load
Bleed resistor version / medical version M80
1)
2)
L
N
PE
L’
N’
PE’
L1
L2
R
Cx
Cy
Cy
1) Line
2) Load
Medical version M5
1)
2)
L
N
PE
L’
N’
PE’
L1
L2
R
Cx
1) Line
2) Load
Medical version M5, prot. class II
1)
2)
L
N
L’
N’
L1
L2
R
Cx
1) Line
2) Load
7
Power Entry Modules with Line Filter 5120
https://www.schurter.com /PG06
EMC Products
Attenuation Loss - - - - 50Ω differential mode _____ 50Ω common mode
Standard version
1 A 2 A 4 A 6 A
10 A 15 A
Medical version (M5)
1 A 2 A 4 A 6 A
10 A 15 A
All Variants
Rated Cur-
rent [A]
Filter-Type Mounting Mounting side Terminal Protection Class V-Lock Order Number
6Standard Version Snap-in 2 - 3 mm Front Side Flexible wire
AWG18
I 5120.3034.0
1Standard Version Snap-in Front Side Quick connect
terminals 6.3 x
0.8 mm
I 5120.2000.0
2Standard Version Snap-in Front Side Quick connect
terminals 6.3 x
0.8 mm
I 5120.2001.0 █
4Standard Version Snap-in Front Side Quick connect
terminals 6.3 x
0.8 mm
I 5120.2003.0 █
6Standard Version Snap-in Front Side Quick connect
terminals 6.3 x
0.8 mm
I 5120.2004.0
10 Standard Version Snap-in Front Side Quick connect
terminals 6.3 x
0.8 mm
I 5120.2006.0
10 Standard Version Snap-in Front Side Flexible wire and
Earth pin 6.3 x 0.8
I 5120.2046.0
8
Power Entry Modules with Line Filter
5120 https://www.schurter.com /PG06
EMC Products
Rated Cur-
rent [A]
Filter-Type Mounting Mounting side Terminal Protection Class V-Lock Order Number
15 Standard Version Snap-in Front Side Quick connect
terminals 6.3 x
0.8 mm
I 5120.2007.0 █
1Standard Version Screw/PCB snap-in Rear Side PCB pin and earth
pin 6.3 x 0.8
Il5120.5070.0
2Standard Version Screw/PCB snap-in Rear Side PCB pin and earth
pin 6.3 x 0.8
I 5120.5071.0
4Standard Version Screw/PCB snap-in Rear Side PCB pin and earth
pin 6.3 x 0.8
I 5120.5073.0
6Standard Version Screw/PCB snap-in Rear Side PCB pin and earth
pin 6.3 x 0.8
I 5120.5074.0
10 Standard Version Screw/PCB snap-in Rear Side PCB pin and earth
pin 6.3 x 0.8
I 5120.5076.0
15 Standard Version Screw/PCB snap-in Rear Side PCB pin and earth
pin 6.3 x 0.8
I 5120.5077.0
1Standard Version Screw/PCB Rear Side PCB pin and earth
pin 6.3 x 0.8
I 5120.4070.0
2Standard Version Screw/PCB Rear Side PCB pin and earth
pin 6.3 x 0.8
I 5120.4071.0
4Standard Version Screw/PCB Rear Side PCB pin and earth
pin 6.3 x 0.8
I 5120.4073.0
6Standard Version Screw/PCB Rear Side PCB pin and earth
pin 6.3 x 0.8
I 5120.4074.0
10 Standard Version Screw/PCB Rear Side PCB pin and earth
pin 6.3 x 0.8
I 5120.4076.0
15 Standard Version Screw/PCB Rear Side PCB pin and earth
pin 6.3 x 0.8
I 5120.4077.0
1Standard Version Screw-on/Rivet Front-/Rear-Side Quick connect
terminals 6.3 x
0.8 mm
I 5120.0000.0
1Standard Version Screw-on/Rivet Front-/Rear-Side Solder terminals I 5120.0010.0
2Standard Version Screw-on/Rivet Front-/Rear-Side Quick connect
terminals 6.3 x
0.8 mm
I 5120.0001.0 █
4Standard Version Screw-on/Rivet Front-/Rear-Side Quick connect
terminals 6.3 x
0.8 mm
I 5120.0003.0 █
6Standard Version Screw-on/Rivet Front-/Rear-Side Quick connect
terminals 6.3 x
0.8 mm
I 5120.0004.0 █
10 Standard Version Screw-on/Rivet Front-/Rear-Side Quick connect
terminals 6.3 x
0.8 mm
I 5120.0006.0 █
15 Standard Version Screw-on/Rivet Front-/Rear-Side Quick connect
terminals 6.3 x
0.8 mm
I 5120.0007.0 █
15 Standard Version Screw-on/Rivet Front-/Rear-Side Flexible wire
AWG16
I 5120.0057.0
1Standard Version Screw with plastic flange Front Side Quick connect
terminals 6.3 x
0.8 mm
Il3-101-140
2Standard Version Screw with plastic flange Front Side Quick connect
terminals 6.3 x
0.8 mm
Il3-101-141 █
4Standard Version Screw with plastic flange Front Side Quick connect
terminals 6.3 x
0.8 mm
Il3-101-142 █
6Standard Version Screw with plastic flange Front Side Quick connect
terminals 6.3 x
0.8 mm
Il3-101-143 █
10 Standard Version Screw with plastic flange Front Side Quick connect
terminals 6.3 x
0.8 mm
Il3-100-776 █
15 Standard Version Screw with plastic flange Front Side Quick connect
terminals 6.3 x
0.8 mm
Il3-101-144 █
1Standard Version Screw Rear Side Quick connect
terminals 6.3 x
0.8 mm
I 5120.1000.0
2Standard Version Screw Rear Side Quick connect
terminals 6.3 x
0.8 mm
I 5120.1001.0
4Standard Version Screw Rear Side Quick connect
terminals 6.3 x
0.8 mm
I 5120.1003.0 █
9
Power Entry Modules with Line Filter 5120
https://www.schurter.com /PG06
EMC Products
Rated Cur-
rent [A]
Filter-Type Mounting Mounting side Terminal Protection Class V-Lock Order Number
6Standard Version Screw Rear Side Quick connect
terminals 6.3 x
0.8 mm
I 5120.1004.0 █
10 Standard Version Screw Rear Side Quick connect
terminals 6.3 x
0.8 mm
I 5120.1006.0 █
10 Standard Version Screw Rear Side Quick connect
terminals 6.3 x
0.8 mm
Il5120.1006.0.21
10 Standard Version Screw Rear Side Flexible wire and
Earth pin 6.3 x 0.8
I 5120.1046.0
15 Standard Version Screw Rear Side Quick connect
terminals 6.3 x
0.8 mm
I 5120.1007.0
15 Standard Version Screw Rear Side Quick connect
terminals 6.3 x
0.8 mm
Il5120.1007.0.21
1Medical Version (M5) Snap-in Front Side Quick connect
terminals 6.3 x
0.8 mm
I 5120.2300.0
2Medical Version (M5) Snap-in Front Side Quick connect
terminals 6.3 x
0.8 mm
I 5120.2301.0
4Medical Version (M5) Snap-in Front Side Quick connect
terminals 6.3 x
0.8 mm
I 5120.2303.0
6Medical Version (M5) Snap-in Front Side Quick connect
terminals 6.3 x
0.8 mm
I 5120.2304.0
10 Medical Version (M5) Snap-in Front Side Quick connect
terminals 6.3 x
0.8 mm
I 5120.2306.0 █
15 Medical Version (M5) Snap-in Front Side Quick connect
terminals 6.3 x
0.8 mm
I 5120.2307.0
4Medical Version (M5) Screw/PCB snap-in Rear Side PCB pin and earth
pin 6.3 x 0.8
I 5120.5373.0
6Medical Version (M5) Screw/PCB snap-in Rear Side PCB pin and earth
pin 6.3 x 0.8
I 5120.5374.0
4Medical Version (M5) Screw/PCB Rear Side PCB pin and earth
pin 6.3 x 0.8
I 5120.4373.0
6Medical Version (M5) Screw/PCB Rear Side PCB pin and earth
pin 6.3 x 0.8
I 5120.4374.0
1Medical Version (M5) Screw-on/Rivet Front-/Rear-Side Quick connect
terminals 6.3 x
0.8 mm
I 5120.0300.0
2Medical Version (M5) Screw-on/Rivet Front-/Rear-Side Quick connect
terminals 6.3 x
0.8 mm
I 5120.0301.0
4Medical Version (M5) Screw-on/Rivet Front-/Rear-Side Quick connect
terminals 6.3 x
0.8 mm
I 5120.0303.0 █
4Medical Version (M5) Screw-on/Rivet Front-/Rear-Side Flexible wire and
Earth pin 6.3 x 0.8
I 5120.0343.0
6Medical Version (M5) Screw-on/Rivet Front-/Rear-Side Quick connect
terminals 6.3 x
0.8 mm
I 5120.0304.0
10 Medical Version (M5) Screw-on/Rivet Front-/Rear-Side Quick connect
terminals 6.3 x
0.8 mm
I 5120.0306.0
15 Medical Version (M5) Screw-on/Rivet Front-/Rear-Side Quick connect
terminals 6.3 x
0.8 mm
I 5120.0307.0
1Medical Version (M5) Screw with plastic flange Front Side Quick connect
terminals 6.3 x
0.8 mm
Il3-101-145
2Medical Version (M5) Screw with plastic flange Front Side Quick connect
terminals 6.3 x
0.8 mm
Il3-101-146
4Medical Version (M5) Screw with plastic flange Front Side Quick connect
terminals 6.3 x
0.8 mm
Il3-100-794 █
6Medical Version (M5) Screw with plastic flange Front Side Quick connect
terminals 6.3 x
0.8 mm
Il3-101-147
10 Medical Version (M5) Screw with plastic flange Front Side Quick connect
terminals 6.3 x
0.8 mm
Il3-101-148
10
Power Entry Modules with Line Filter
5120 https://www.schurter.com /PG06
EMC Products
Rated Cur-
rent [A]
Filter-Type Mounting Mounting side Terminal Protection Class V-Lock Order Number
15 Medical Version (M5) Screw with plastic flange Front Side Quick connect
terminals 6.3 x
0.8 mm
Il3-101-149
1Medical Version (M5) Screw Rear Side Quick connect
terminals 6.3 x
0.8 mm
I 5120.1300.0
2Medical Version (M5) Screw Rear Side Quick connect
terminals 6.3 x
0.8 mm
I 5120.1301.0
4Medical Version (M5) Screw Rear Side Quick connect
terminals 6.3 x
0.8 mm
I 5120.1303.0
6Medical Version (M5) Screw Rear Side Quick connect
terminals 6.3 x
0.8 mm
I 5120.1304.0
10 Medical Version (M5) Screw Rear Side Quick connect
terminals 6.3 x
0.8 mm
I 5120.1306.0
10 Medical Version (M5) Screw Rear Side Quick connect
terminals 6.3 x
0.8 mm
Il5120.1306.0.21
10 Medical Version (M5) Screw Rear Side Flexible wire and
Earth pin 6.3 x 0.8
I 5120.1346.0
15 Medical Version (M5) Screw Rear Side Quick connect
terminals 6.3 x
0.8 mm
I 5120.1307.0
1Medical Version (M5) Snap-in Front Side Quick connect
terminals 6.3 x
0.8 mm
II 5120.2300.1
2Medical Version (M5) Snap-in Front Side Quick connect
terminals 6.3 x
0.8 mm
II 5120.2301.1
4Medical Version (M5) Snap-in Front Side Quick connect
terminals 6.3 x
0.8 mm
II 5120.2303.1
6Medical Version (M5) Snap-in Front Side Quick connect
terminals 6.3 x
0.8 mm
II 5120.2304.1
10 Medical Version (M5) Snap-in Front Side Quick connect
terminals 6.3 x
0.8 mm
II 5120.2306.1
15 Medical Version (M5) Snap-in Front Side Quick connect
terminals 6.3 x
0.8 mm
II 5120.2307.1
4Medical Version (M5) Screw/PCB snap-in Rear Side PCB pin and earth
pin 6.3 x 0.8
II 5120.5373.1
6Medical Version (M5) Screw/PCB snap-in Rear Side PCB pin and earth
pin 6.3 x 0.8
II 5120.5374.1
10 Medical Version (M5) Screw/PCB snap-in Rear Side PCB pin and earth
pin 6.3 x 0.8
II 5120.5376.1
4Medical Version (M5) Screw/PCB Rear Side PCB pin and earth
pin 6.3 x 0.8
II 5120.4373.1
6Medical Version (M5) Screw/PCB Rear Side PCB pin and earth
pin 6.3 x 0.8
II 5120.4374.1
2Medical Version (M5) Screw-on/Rivet Front-/Rear-Side Quick connect
terminals 6.3 x
0.8 mm
II 5120.0301.1
4Medical Version (M5) Screw-on/Rivet Front-/Rear-Side Quick connect
terminals 6.3 x
0.8 mm
II 5120.0303.1
6Medical Version (M5) Screw-on/Rivet Front-/Rear-Side Quick connect
terminals 6.3 x
0.8 mm
II 5120.0304.1
10 Medical Version (M5) Screw-on/Rivet Front-/Rear-Side Solder terminals II 5120.0316.1
1Medical Version (M5) Screw Rear Side Quick connect
terminals 6.3 x
0.8 mm
II 5120.1300.1
2Medical Version (M5) Screw Rear Side Quick connect
terminals 6.3 x
0.8 mm
II 5120.1301.1
2Medical Version (M5) Screw Rear Side Solder terminals II 5120.1311.1
4Medical Version (M5) Screw Rear Side Quick connect
terminals 6.3 x
0.8 mm
II 5120.1303.1
6Medical Version (M5) Screw Rear Side Quick connect
terminals 6.3 x
0.8 mm
II 5120.1304.1
11
Power Entry Modules with Line Filter 5120
https://www.schurter.com /PG06
EMC Products
Rated Cur-
rent [A]
Filter-Type Mounting Mounting side Terminal Protection Class V-Lock Order Number
10 Medical Version (M5) Screw Rear Side Quick connect
terminals 6.3 x
0.8 mm
II 5120.1306.1
2Bleed Resistor Version Snap-in Front Side Quick connect
terminals 6.3 x
0.8 mm
I 5120.2201.0
4Bleed Resistor Version Snap-in Front Side Quick connect
terminals 6.3 x
0.8 mm
I 5120.2203.0
6Bleed Resistor Version Snap-in Front Side Quick connect
terminals 6.3 x
0.8 mm
I 5120.2204.0
10 Bleed Resistor Version Snap-in Front Side Quick connect
terminals 6.3 x
0.8 mm
I 5120.2206.0
15 Bleed Resistor Version Snap-in Front Side Quick connect
terminals 6.3 x
0.8 mm
I 5120.2207.0
15 Bleed Resistor Version Snap-in Front Side Quick connect
terminals 6.3 x
0.8 mm
Il5120.2207.0.21
10 Bleed Resistor Version Screw-on/Rivet Front-/Rear-Side Solder terminals I 5120.0216.0
█ Most Popular.
Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER
- 15 A version only according UL/CSA
- Type for screw-on mounting from rear side has pre-threaded holes for M3 screws
Variants with plastic flange are all V-Lock versions.
Packaging unit 10 Pcs
Accessories
Description
Wire Harness
Wire harness for SCHURTER products
Assorted Covers
Rear Cover
0859.0048
Cord retaining kits
Cord retaining strain relief
Flat head, E 4700.0005
Flat head, G 4700.0007
12
Power Entry Modules with Line Filter
5120 https://www.schurter.com /PG06
EMC Products
Mating Outlets/Connectors
Category / Description
Appliance Outlet Overview complete
IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder Terminal 4787
IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal 4788
IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal 5091
Appliance Outlet further types to 5120
Connector Overview complete
4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4782
4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4785
4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06
IEC Connector C15 for hot conditions 120°C, Rewireable, Straight 4781
IEC Connector C15 for hot conditions 120°C, Rewireable, Angled 4784
Connector further types to 5120 ...
Mating Outlets/Connectors shuttered
Power Cord Overview complete
VAC13KS, Overview, V-Lock cord retaining, diverse Connector IEC C13, diverse, black VAC13KS
Power cord with IEC connector C17, V-Lock, straight VAC17KS
Power Cord further types to 5120
The specifications, descriptions and illustrations indicated in this document are based on current
information. All content is subject to modifications and amendments. Information furnished is believed
to be accurate and reliable. However, users should independently evaluate the suitability and test each
product selected for their own applications.
25.10.2018
