5120 Power Entry Modules with Line Filter https://www.schurter.com /PG06 IEC Appliance Inlet C14 or C18 with Filter, ECO design, Front- or Rear Side Mounting Front side mounting with plastic flange C14 Snap-in mounting Quick connect terminals 6.3 x 0.8 mm Protection class II Screw-on mounting with wires (stranded) C18 See below: Approvals and Compliances 70 C 70 C Description - Panel mount : Screw-on version from front or rear side, snap-in version from front side, PCB Version from rear side - 2 Functions : Appliance Inlet protection class I or II , Line filter in standard and medical version - Solder, quick connect or wire (stranded) - PCB Mounting - Earth Terminal Unique Selling Proposition - Various variants Metal flange for optimal shielding Compact design Variants for protection class I and II Characteristics - Compact high performance filter Optimal shielding due to completely closed filter case, unpotted - Suitable for assembly in metal plated plastic housings - Suitable for use in equipment according to IEC/UL 60950 Suitable for use in medical equipment according to IEC/UL 60601-1 Other versions on request - Snap-in for panel thickness >2mm to 3mm flexible wire with various lenghts Class X1- and Y1-capacitors for enhanced withstand voltage Medical version M80 Variant with notch for V-Lock mating Cordsets References Alternative: version without line filter 6100-3;6100-4;6102-3;6102-5 Weblinks pdf datasheet, html-datasheet, General Product Information, DistributorStock-Check, Accessories, Detailed request for product, Landing Page Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Technical Data Ratings IEC Ratings UL/CSA Leakage Current Dielectric Strength Allowable Operation Temperature Climatic Category IP-Protection Protection Class Terminal Panel Thickness S Material: Housing 1 - 10 A @ Ta 40 C / 250 VAC; 50 Hz 1 - 15 A @ Ta 40 C / 250 VAC; 60 Hz standard < 0.5 mA (250 V / 60 Hz) medical < 5 A (250 V / 60 Hz) > 1.7 kVDC between L-N > 2.7 kVDC between L/N-PE Test voltage (2 sec) -25 C to 85 C appliance inlet/-outlet Line Filter MTBF C14 / C18 acc. to IEC 60320-1, UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 C, 10 A, Protection Class I or II Standard and Medical Version, IEC 60939, UL 1283, CSA C22.2 no. 8 Technical Details > 3'000'000 h acc. to MIL-HB-217 F 25/085/21 acc. to IEC 60068-1 from front side IP 40 acc. to IEC 60529 Suitable for appliances with protection class I or II acc. to IEC 61140 Quick connect terminals 6.3 x 0.8 mm Solder terminals Flexible wire AWG18 (15A AWG16), 150 mm Screw with plastic flange: max 8 mm Mounting screw torque max 0.5 Nm Snap-in: 0.8 mm to 2 mm (all steps with one variant) Themoplast / steel tin-plated, black / metallic, UL 94V-0 Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals EMC Products 1 5120 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: 5120 Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40016382 UL Approvals UL UL File Number: E72928 CQC Approvals CQC CQC File Number: Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 60939 Passive filters for suppressing electromagnetic interference Designed according to UL 498 Standard for Attachment Plugs and Receptacles Designed according to UL 1283 Electromagnetic interference filters Designed according to CSA C22.2 no. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Designed according to CSA C22.2 no. 8 Electromagnetic interference (EMI) filters Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technology equipment. Designed for applications acc. IEC 60601-1 Medical electrical equipment - Part 1: General requirements for basic safety and essential performance Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. SCHURTER AG V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. SCHURTER AG Suitable for use in medical equipment according to IEC/UL 60601-1 Product standards Product standards that are referenced Organization Application standards Application standards where the product can be used Organization Compliances The product complies with following Guide Lines Identification Medical Equipment 2 EMC Products 5120 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Dimensions [mm] Front or rear side mounting for screws with nuts or blind rivets (panel cutout for frontside mounting) 48.6 39.5 2.9 12 29 0.1 max.R3 8.5 4.4 24.6 12 54.9 3.6 21.5 0.1 40 40 0.10 M3 Front side mounting with plastic flange 48.6 39.5 2.9 12 29 0.1 max.R3 8.5 24.6 4.4 12 54.9 3.5 21.5 0.1 40 40 0.10 M3 Rear side mounting with pre-formed, threaded holes for M3 screws (panel cutout for rear side mounting) 48.6 39.5 2.9 30.5 0.1 12 max.R3 22.5 0.1 24.6 12 4.4 40 40 0.10 M3 3.6 Dimensions for class II version also apply to class I EMC Products 3 5120 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Snap-in mounting from front side 2.9 39.5 29.4 0.10 12 max.R1.5 8.5 24.6 4.4 12 54.9 Dimensions for class I version also apply class II PCB snap-in rear side mounting, protection class II 48.6 49.2 40 39.5 M3 4.6 26.2 2.9 15.5 30.5 0.10 4.6 0.05 12 0.10 40 0.10 o1 . 6 +0 0 .10 o3.6 4 EMC Products 26.2 0.10 22.5 0.10 max.R3 27 27 0.10 o6 0.05 12 21.5 0.10 32.6 5120 Power Entry Modules with Line Filter https://www.schurter.com /PG06 PCB rear side mounting, protection class II 48.6 40 39.5 M3 30.8 2.9 12 15.5 27 max.R3 12 0.10 40 0.10 o1 .6 +0 0 .10 o3.6 30.8 0.10 22.5 0.10 30.5 0.10 Screw and snap-in mounting with flexible wire 54.9 48.6 40 150 46.1 2) 1) 40 0.10 o3.6 3) M3 max.R1.5 40 0.10 29.4 0.10 4) 5) 21.5 0.10 22.5 0.10 max.R3 21.5 0.10 290.10 30.5 0.10 max.R3 13 8.5 24.6 M3 2.9 1.25 39.5 1) Flexible wire, standard length 150 mm or special length on request 2) Nonexistent for protection class II 3) Panel cut-out screw-on version, back-side mounting 4) Panel cut-out screw-on version, front- or back-side mounting 5) Panel cut-out snap-in version, front-side mounting EMC Products 5 5120 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Technical Data of Filter-Components Rated Current [A] Filter-Type Inductances L [mH] Capacitance CX [nF] Capacitance CY [nF] R [M] 1 Standard Version 2 x 12 100 2.2 - 2 Standard Version 2 x 5.2 100 2.2 - 4 Standard Version 2x2 100 2.2 - 6 Standard Version 2 x 0.8 100 2.2 - 10 Standard Version 2 x 0.4 100 2.2 - 15 Standard Version 2 x 0.1 100 2.2 - 1 Medical Version (M5) 2 x 12 100 - 1 2 Medical Version (M5) 2 x 5.2 100 - 1 4 Medical Version (M5) 2x2 100 - 1 6 Medical Version (M5) 2 x 0.8 100 - 1 10 Medical Version (M5) 2 x 0.4 100 - 1 15 Medical Version (M5) 2 x 0.1 100 - 1 1 Bleed Resistor Version 2 x 12 100 2.2 1 2 Bleed Resistor Version 2 x 5.2 100 2.2 1 4 Bleed Resistor Version 2x2 100 2.2 1 6 Bleed Resistor Version 2 x 0.8 100 2.2 1 10 Bleed Resistor Version 2 x 0.4 100 2.2 1 15 Bleed Resistor Version 2 x 0.1 100 2.2 1 Diagrams Standard version Bleed resistor version / medical version M80 L L L' L' L1 1) PE Cx L1 Cy R L2 N Cy PE' 2) 1) PE Cx L2 N N' 1) Line 2) Load 1) Line 2) Load Medical version M5 Medical version M5, prot. class II L L' L Cx PE' 2) R N' 1) Line 2) Load 6 1) N 1) Line 2) Load EMC Products N' L' Cx L2 N Cy PE' 2) L1 L1 1) PE Cy R 2) R L2 N' 5120 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Attenuation Loss - - - - 50 differential mode _____ 50 common mode Standard version 1A 2A 10 A 15 A 4A 6A 4A 6A Medical version (M5) 1A 2A 10 A 15 A All Variants Rated Current [A] Filter-Type Mounting Mounting side Terminal Protection Class V-Lock Order Number 6 Standard Version Snap-in 2 - 3 mm Front Side Flexible wire AWG18 I 5120.3034.0 1 Standard Version Snap-in Front Side Quick connect terminals 6.3 x 0.8 mm I 5120.2000.0 2 Standard Version Snap-in Front Side Quick connect terminals 6.3 x 0.8 mm I 5120.2001.0 4 Standard Version Snap-in Front Side Quick connect terminals 6.3 x 0.8 mm I 5120.2003.0 6 Standard Version Snap-in Front Side Quick connect terminals 6.3 x 0.8 mm I 5120.2004.0 10 Standard Version Snap-in Front Side Quick connect terminals 6.3 x 0.8 mm I 5120.2006.0 10 Standard Version Snap-in Front Side Flexible wire and Earth pin 6.3 x 0.8 I 5120.2046.0 EMC Products 7 5120 Rated Current [A] Power Entry Modules with Line Filter https://www.schurter.com /PG06 Filter-Type Mounting Mounting side Terminal Protection Class V-Lock Order Number 15 Standard Version Snap-in Front Side Quick connect terminals 6.3 x 0.8 mm I 1 Standard Version Screw/PCB snap-in Rear Side PCB pin and earth pin 6.3 x 0.8 I 2 Standard Version Screw/PCB snap-in Rear Side PCB pin and earth pin 6.3 x 0.8 I 5120.5071.0 4 Standard Version Screw/PCB snap-in Rear Side PCB pin and earth pin 6.3 x 0.8 I 5120.5073.0 6 Standard Version Screw/PCB snap-in Rear Side PCB pin and earth pin 6.3 x 0.8 I 5120.5074.0 10 Standard Version Screw/PCB snap-in Rear Side PCB pin and earth pin 6.3 x 0.8 I 5120.5076.0 15 Standard Version Screw/PCB snap-in Rear Side PCB pin and earth pin 6.3 x 0.8 I 5120.5077.0 1 Standard Version Screw/PCB Rear Side PCB pin and earth pin 6.3 x 0.8 I 5120.4070.0 2 Standard Version Screw/PCB Rear Side PCB pin and earth pin 6.3 x 0.8 I 5120.4071.0 4 Standard Version Screw/PCB Rear Side PCB pin and earth pin 6.3 x 0.8 I 5120.4073.0 6 Standard Version Screw/PCB Rear Side PCB pin and earth pin 6.3 x 0.8 I 5120.4074.0 10 Standard Version Screw/PCB Rear Side PCB pin and earth pin 6.3 x 0.8 I 5120.4076.0 15 Standard Version Screw/PCB Rear Side PCB pin and earth pin 6.3 x 0.8 I 5120.4077.0 1 Standard Version Screw-on/Rivet Front-/Rear-Side Quick connect terminals 6.3 x 0.8 mm I 5120.0000.0 1 Standard Version Screw-on/Rivet Front-/Rear-Side Solder terminals I 5120.0010.0 2 Standard Version Screw-on/Rivet Front-/Rear-Side Quick connect terminals 6.3 x 0.8 mm I 5120.0001.0 4 Standard Version Screw-on/Rivet Front-/Rear-Side Quick connect terminals 6.3 x 0.8 mm I 5120.0003.0 6 Standard Version Screw-on/Rivet Front-/Rear-Side Quick connect terminals 6.3 x 0.8 mm I 5120.0004.0 10 Standard Version Screw-on/Rivet Front-/Rear-Side Quick connect terminals 6.3 x 0.8 mm I 5120.0006.0 15 Standard Version Screw-on/Rivet Front-/Rear-Side Quick connect terminals 6.3 x 0.8 mm I 5120.0007.0 15 Standard Version Screw-on/Rivet Front-/Rear-Side Flexible wire AWG16 I 5120.0057.0 1 Standard Version Screw with plastic flange Front Side Quick connect terminals 6.3 x 0.8 mm I l 3-101-140 2 Standard Version Screw with plastic flange Front Side Quick connect terminals 6.3 x 0.8 mm I l 3-101-141 4 Standard Version Screw with plastic flange Front Side Quick connect terminals 6.3 x 0.8 mm I l 3-101-142 6 Standard Version Screw with plastic flange Front Side Quick connect terminals 6.3 x 0.8 mm I l 3-101-143 10 Standard Version Screw with plastic flange Front Side Quick connect terminals 6.3 x 0.8 mm I l 3-100-776 15 Standard Version Screw with plastic flange Front Side Quick connect terminals 6.3 x 0.8 mm I l 3-101-144 1 Standard Version Screw Rear Side Quick connect terminals 6.3 x 0.8 mm I 5120.1000.0 2 Standard Version Screw Rear Side Quick connect terminals 6.3 x 0.8 mm I 5120.1001.0 4 Standard Version Screw Rear Side Quick connect terminals 6.3 x 0.8 mm I 5120.1003.0 8 EMC Products 5120.2007.0 l 5120.5070.0 5120 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Rated Current [A] Filter-Type Mounting Mounting side Terminal Protection Class V-Lock Order Number 6 Standard Version Screw Rear Side Quick connect terminals 6.3 x 0.8 mm I 5120.1004.0 10 Standard Version Screw Rear Side Quick connect terminals 6.3 x 0.8 mm I 5120.1006.0 10 Standard Version Screw Rear Side Quick connect terminals 6.3 x 0.8 mm I 10 Standard Version Screw Rear Side Flexible wire and Earth pin 6.3 x 0.8 I 5120.1046.0 15 Standard Version Screw Rear Side Quick connect terminals 6.3 x 0.8 mm I 5120.1007.0 15 Standard Version Screw Rear Side Quick connect terminals 6.3 x 0.8 mm I 1 Medical Version (M5) Snap-in Front Side Quick connect terminals 6.3 x 0.8 mm I 5120.2300.0 2 Medical Version (M5) Snap-in Front Side Quick connect terminals 6.3 x 0.8 mm I 5120.2301.0 4 Medical Version (M5) Snap-in Front Side Quick connect terminals 6.3 x 0.8 mm I 5120.2303.0 6 Medical Version (M5) Snap-in Front Side Quick connect terminals 6.3 x 0.8 mm I 5120.2304.0 10 Medical Version (M5) Snap-in Front Side Quick connect terminals 6.3 x 0.8 mm I 5120.2306.0 15 Medical Version (M5) Snap-in Front Side Quick connect terminals 6.3 x 0.8 mm I 5120.2307.0 4 Medical Version (M5) Screw/PCB snap-in Rear Side PCB pin and earth pin 6.3 x 0.8 I 5120.5373.0 6 Medical Version (M5) Screw/PCB snap-in Rear Side PCB pin and earth pin 6.3 x 0.8 I 5120.5374.0 4 Medical Version (M5) Screw/PCB Rear Side PCB pin and earth pin 6.3 x 0.8 I 5120.4373.0 6 Medical Version (M5) Screw/PCB Rear Side PCB pin and earth pin 6.3 x 0.8 I 5120.4374.0 1 Medical Version (M5) Screw-on/Rivet Front-/Rear-Side Quick connect terminals 6.3 x 0.8 mm I 5120.0300.0 2 Medical Version (M5) Screw-on/Rivet Front-/Rear-Side Quick connect terminals 6.3 x 0.8 mm I 5120.0301.0 4 Medical Version (M5) Screw-on/Rivet Front-/Rear-Side Quick connect terminals 6.3 x 0.8 mm I 5120.0303.0 4 Medical Version (M5) Screw-on/Rivet Front-/Rear-Side Flexible wire and Earth pin 6.3 x 0.8 I 5120.0343.0 6 Medical Version (M5) Screw-on/Rivet Front-/Rear-Side Quick connect terminals 6.3 x 0.8 mm I 5120.0304.0 10 Medical Version (M5) Screw-on/Rivet Front-/Rear-Side Quick connect terminals 6.3 x 0.8 mm I 5120.0306.0 15 Medical Version (M5) Screw-on/Rivet Front-/Rear-Side Quick connect terminals 6.3 x 0.8 mm I 5120.0307.0 1 Medical Version (M5) Screw with plastic flange Front Side Quick connect terminals 6.3 x 0.8 mm I l 3-101-145 2 Medical Version (M5) Screw with plastic flange Front Side Quick connect terminals 6.3 x 0.8 mm I l 3-101-146 4 Medical Version (M5) Screw with plastic flange Front Side Quick connect terminals 6.3 x 0.8 mm I l 3-100-794 6 Medical Version (M5) Screw with plastic flange Front Side Quick connect terminals 6.3 x 0.8 mm I l 3-101-147 10 Medical Version (M5) Screw with plastic flange Front Side Quick connect terminals 6.3 x 0.8 mm I l 3-101-148 EMC Products l l 5120.1006.0.21 5120.1007.0.21 9 5120 Rated Current [A] Power Entry Modules with Line Filter https://www.schurter.com /PG06 Filter-Type Mounting Mounting side Terminal Protection Class V-Lock l Order Number 15 Medical Version (M5) Screw with plastic flange Front Side Quick connect terminals 6.3 x 0.8 mm I 1 Medical Version (M5) Screw Rear Side Quick connect terminals 6.3 x 0.8 mm I 5120.1300.0 2 Medical Version (M5) Screw Rear Side Quick connect terminals 6.3 x 0.8 mm I 5120.1301.0 4 Medical Version (M5) Screw Rear Side Quick connect terminals 6.3 x 0.8 mm I 5120.1303.0 6 Medical Version (M5) Screw Rear Side Quick connect terminals 6.3 x 0.8 mm I 5120.1304.0 10 Medical Version (M5) Screw Rear Side Quick connect terminals 6.3 x 0.8 mm I 5120.1306.0 10 Medical Version (M5) Screw Rear Side Quick connect terminals 6.3 x 0.8 mm I 10 Medical Version (M5) Screw Rear Side Flexible wire and Earth pin 6.3 x 0.8 I 5120.1346.0 15 Medical Version (M5) Screw Rear Side Quick connect terminals 6.3 x 0.8 mm I 5120.1307.0 1 Medical Version (M5) Snap-in Front Side Quick connect terminals 6.3 x 0.8 mm II 5120.2300.1 2 Medical Version (M5) Snap-in Front Side Quick connect terminals 6.3 x 0.8 mm II 5120.2301.1 4 Medical Version (M5) Snap-in Front Side Quick connect terminals 6.3 x 0.8 mm II 5120.2303.1 6 Medical Version (M5) Snap-in Front Side Quick connect terminals 6.3 x 0.8 mm II 5120.2304.1 10 Medical Version (M5) Snap-in Front Side Quick connect terminals 6.3 x 0.8 mm II 5120.2306.1 15 Medical Version (M5) Snap-in Front Side Quick connect terminals 6.3 x 0.8 mm II 5120.2307.1 4 Medical Version (M5) Screw/PCB snap-in Rear Side PCB pin and earth pin 6.3 x 0.8 II 5120.5373.1 6 Medical Version (M5) Screw/PCB snap-in Rear Side PCB pin and earth pin 6.3 x 0.8 II 5120.5374.1 10 Medical Version (M5) Screw/PCB snap-in Rear Side PCB pin and earth pin 6.3 x 0.8 II 5120.5376.1 4 Medical Version (M5) Screw/PCB Rear Side PCB pin and earth pin 6.3 x 0.8 II 5120.4373.1 6 Medical Version (M5) Screw/PCB Rear Side PCB pin and earth pin 6.3 x 0.8 II 5120.4374.1 2 Medical Version (M5) Screw-on/Rivet Front-/Rear-Side Quick connect terminals 6.3 x 0.8 mm II 5120.0301.1 4 Medical Version (M5) Screw-on/Rivet Front-/Rear-Side Quick connect terminals 6.3 x 0.8 mm II 5120.0303.1 6 Medical Version (M5) Screw-on/Rivet Front-/Rear-Side Quick connect terminals 6.3 x 0.8 mm II 5120.0304.1 10 Medical Version (M5) Screw-on/Rivet Front-/Rear-Side Solder terminals II 5120.0316.1 1 Medical Version (M5) Screw Rear Side Quick connect terminals 6.3 x 0.8 mm II 5120.1300.1 2 Medical Version (M5) Screw Rear Side Quick connect terminals 6.3 x 0.8 mm II 5120.1301.1 2 Medical Version (M5) Screw Rear Side Solder terminals II 5120.1311.1 4 Medical Version (M5) Screw Rear Side Quick connect terminals 6.3 x 0.8 mm II 5120.1303.1 6 Medical Version (M5) Screw Rear Side Quick connect terminals 6.3 x 0.8 mm II 5120.1304.1 10 EMC Products l 3-101-149 5120.1306.0.21 5120 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Rated Current [A] Filter-Type Mounting Mounting side Terminal Protection Class V-Lock Order Number 10 Medical Version (M5) Screw Rear Side Quick connect terminals 6.3 x 0.8 mm II 5120.1306.1 2 Bleed Resistor Version Snap-in Front Side Quick connect terminals 6.3 x 0.8 mm I 5120.2201.0 4 Bleed Resistor Version Snap-in Front Side Quick connect terminals 6.3 x 0.8 mm I 5120.2203.0 6 Bleed Resistor Version Snap-in Front Side Quick connect terminals 6.3 x 0.8 mm I 5120.2204.0 10 Bleed Resistor Version Snap-in Front Side Quick connect terminals 6.3 x 0.8 mm I 5120.2206.0 15 Bleed Resistor Version Snap-in Front Side Quick connect terminals 6.3 x 0.8 mm I 5120.2207.0 15 Bleed Resistor Version Snap-in Front Side Quick connect terminals 6.3 x 0.8 mm I 10 Bleed Resistor Version Screw-on/Rivet Front-/Rear-Side Solder terminals I l 5120.2207.0.21 5120.0216.0 Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER - 15 A version only according UL/CSA - Type for screw-on mounting from rear side has pre-threaded holes for M3 screws Variants with plastic flange are all V-Lock versions. Packaging unit 10 Pcs Accessories Description Wire Harness Wire harness for SCHURTER products Assorted Covers Rear Cover 0859.0048 Cord retaining kits Cord retaining strain relief Flat head, E 4700.0005 Flat head, G 4700.0007 EMC Products 11 5120 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder Terminal 4787 IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal 4788 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal 5091 Appliance Outlet further types to 5120 Connector Overview complete 4782 Mounting: Power Cord, 3 x 1 mm / 3 x 18 AWG, Cable, Connector: IEC C13 4782 4785 Mounting: Power Cord, 3 x 1 mm / 3 x 18 AWG, Cable, Connector: IEC C13 4785 4300-06 Mounting: Power Cord, 3 x 1 mm / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06 IEC Connector C15 for hot conditions 120C, Rewireable, Straight 4781 IEC Connector C15 for hot conditions 120C, Rewireable, Angled 4784 Connector further types to 5120 ... Mating Outlets/Connectors shuttered Power Cord Overview complete VAC13KS, Overview, V-Lock cord retaining, diverse Connector IEC C13, diverse, black VAC13KS Power cord with IEC connector C17, V-Lock, straight VAC17KS 25.10.2018 Power Cord further types to 5120 12 EMC Products The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Schurter: 3-101-204 3-101-207 3-101-208 3-100-791 3-101-205 3-101-206