43
Type m3/h CFM VDC VDC dB(A) Bel(A) /Watts RPM °C Hours Hours P. 110-114
3312 L 56 33,0 12 6...15 29 4,5 1,4 2 150 -20...+75 80 000 / 35 000 147 500 1
3312 GM 68 40,0 12 6...15 34 4,8 1,7 2 600 -20...+75 70 000 / 30 000 135 000 2
3312 M 68 40,0 12 6...15 34 4,8 1,7 2 600 -20...+75 70 000 / 30 000 135 000 2
3312 80 47,1 12 6...15 37 5,2 2,4 3 000 -20...+75 70 000 / 30 000 135 000 3 /2
3312-177 93 54,7 12 6...15 43 5,7 3,5 3 500 -20...+75 65 000 / 27 500 122 500 5
3314 G 80 47,1 24 12...28 37 5,2 2,6 3 000 -20...+75 70 000 / 30 000 135 000 3
3314 80 47,1 24 12...28 37 5,2 2,6 3 000 -20...+75 70 000 / 30 000 135 000 3 /17
3314-140 85 50,0 24 12...28 40 5,4 3,0 3 200 -20...+75 70 000 / 30 000 135 000 4
3314 H 107 63,0 24 12...28 47 6,0 5,3 4 000 -20...+75 57 500 / 25 000 112 500 6 /2
3318 80 47,1 48 36...56 37 5,2 2,7 3 000 -20...+75 70 000 / 30 000 135 000 3 /2
3318 H 107 63,0 48 36...56 47 6,0 4,3 4 000 -20...+60 57 500 / 35 000 112 500 6 /2/17
max. 280 m3/h
Type m3/h CFM VDC VDC dB(A) Bel(A) /Watts RPM °C Hours Hours P. 110
3212 JN 130 76,5 12 7...13,8 51 6,1 7,5 6 000 -20 ...+70 70 000 / 35 000 140 000 1 /2
3212 JH 146 86,0 12 7...15 55 6,4 9,0 6 800 -20 ...+70 70 000 / 35 000 140 000 2 /2
3212 JH3 237 139,5 12 6...13,8 69 7,8 30,0 11 000 -20 ...+70 65 000 / 32 500 130 000 3 /2
3212 JH4 280 164,8 12 6...13,8 73 8,2 50,0 13 000 -20 ...+70 60 000 / 30 000 120 000 4 /2
3214 JN 130 76,5 24 11...28 51 6,1 8,0 6 000 -20 ...+70 70 000 / 35 000 140 000 1
3214 JH 146 86,0 24 11...30 55 6,4 9,0 6 800 -20 ...+70 70 000 / 35 000 140 000 2 /2
3214 JH3 237 139,5 24 12...27,6 69 7,8 30,0 11 000 -20 ...+70 65 000 / 32 500 130 000 3 /2
3214 JH4 280 164,8 24 12...27,6 73 8,2 50,0 13 000 -20 ...+70 60 000 / 30 000 120 000 4
3218 JN 130 76,5 48 36...56 51 6,1 7,0 6 000 -20 ...+70 70 000 / 35 000 140 000 1
3218 JH 146 86,0 48 36...53 55 6,4 9,5 6 800 -20 ...+70 70 000 / 35 000 140 000 2
3218 JH3 237 139,5 48 20...58,0 69 7,8 30,0 11 000 -20 ...+70 65 000 / 32 500 130 000 3 /2
3218 JH4 280 164,8 48 20...58,0 73 8,2 50,0 13 000 -20 ...+70 60 000 / 30 000 120 000 4
Highlights:
– Very rigid compression curve for high air flow at high back pressure.
– Innovative impeller with winglets for low noise.
– Optional Vario-Pro: Highly adaptable software configuration of the fan enables
a tailor-made solution to the specific requirements of your applications.
General characteristics:
– Material: fibreglass-reinforced plastic. Impeller PA, housing PBT.
– Fully integrated electronic commutation. Protected against reverse polarity and locking.
– Connection via single strands AWG 24 (H3 and H4: AWG 22), TR 64.
Bared and tin-plated.
– Air exhaust over struts. Direction of rotation clockwise, seen on rotor.
– Mass: 240 g (H3 and H4: 280 g).
DC axial fans
Series 3200 J 92 x 92 x 38 mm
200
50
100
200
100
40 60
300
150
80 100
0,81,2
0,4
2
1
m³/h
Pa
CFM
[in H2O]
0 25 50 75 100 125
50 100
100
150
300
400
500
600
200
200
250
2,02,4
0,8 1,2 1,6
0,4
4
700
150
3
m³/h
Pa
CFM
[in H2O]
Nominal data
Specials
HHPP
AA
IP54IP54
Û
PWMPWM
II
TT
NN
GG
Nominal voltage
Air flow
Air flow
Voltage range
Sound pressure level
Sound power level
Sintec sleeve bearings
Ball bearings
Power input
Nominal speed
Temperature range
Service life L10 (40 °C)
ebm-papst Standard
Service life L10 (Tmax)
ebm-papst Standard
Life expectancy L10∆
(40 °C) see P. 15
Curve
3200 JH3 and JH4 also as
standard with PWM control input and speed signal
.
Speed control range from 2000 RPM up to maximum nominal speed. Stationary at 0 % PWM,
maximum speed at sensor break.
InformationDC axial fans
Accessories
Representatives AC centrifugal fans DC fans - specials
ACmaxx / i-maxx
AC axial fans DC centrifugal fans
Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:26 Seite 43
