S114-26 - Teledyne Technologies

www.teledynerelays.com S114/1203/Q1

CENTIGRID®AND TO-5

SERIES

S114

CENTIGRID®

SURFACE MOUNT

COMMERCIAL RELAYS

DPDT

DESCRIPTION

The Series S114 Surface Mount Centigrid®Relay is an ultraminiature,

hermetically sealed, armature relay. The low profile height (.360") and .100"

lead spacing make it ideal for applications where extreme packaging density

and/or close PC board spacing are required. The specially formed leads are

pre-tinned to make the relays ideal for most types of surface mount solder

reflow processes.

The basic design and internal construction are identical to the Series 114

Centigrid®relays, and are capable of meeting Teledyne Relays’ T2R®

requirements. The following unique construction features and manufacturing

techniques provide overall high reliability and excellent resistance to

environmental extremes:

• All welded construction.

• Unique uni-frame design providing high magnetic efficiency and mechanical

rigidity.

• High force/mass ratios for resistance to shock and vibration.

• Advanced cleaning techniques provide maximum assurance of internal

cleanliness.

• Precious metal alloy contact material with gold plating assures excellent

high current and dry circuit switching capabilities.

INTERNAL CONSTRUCTION

UNI-FRAME

ARMATURE

UPPER

STATIONARY

CONTACT

MOVING

CONTACT

LOWER

STATIONARY

CONTACT

SERIES

DESIGNATION RELAY TYPE

S114 DPDT basic relay

S114D DPDT relay with internal diode for coil transient suppression

S114DD DPDT relay with internal diodes for coil transient suppression and polarity

reversal protection

ENVIRONMENTAL AND

PHYSICAL SPECIFICATIONS

Temperature

(Ambient)

Storage –65°C to +125°C

Operating –55°C to +85°C

Vibration

(General Note 1) 30 g’s to 3000 Hz

Shock

(General Note 1)

75 g’s,

6 msec, half-sine

Acceleration 50 g’s

Enclosure Hermetically sealed

Weight 0.07 oz. (1.9g) max.

Reflow Temperature 260°C max. temp.

1 min. max.

www.teledynerelays.com S114/1203/Q1

CENTIGRID®AND TO-5

300

250

200

150

100

0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0

LOAD CURRENT (AMPS DC)

FIGURE 1

TYPICAL DC CONTACT RATING (RESISTIVE) (Note 2)

LOAD VOLTAGE (VDC)

SERIES S114

GENERAL ELECTRICAL SPECIFICATIONS (–65°C to +125°C unless otherwise noted) (Notes 2 & 3)

DETAILED ELECTRICAL SPECIFICATIONS (–65°C to +125°C unless otherwise noted) (Note 3)

Contact Arrangement 2 Form C (DPDT)

Rated Duty Continuous

Contact Resistance 0.1 ohm max. before life; 0.2 ohm max. after life at 1A/28Vdc (measured 1/8" from header along lead)

Contact Load Ratings (DC)

(See Fig. 3 for other DC

resistive voltage/current ratings)

Resistive: 1 Amp/28Vdc

Inductive: 200 mA/28Vdc (320 mH)

Lamp: 100 mA/28Vdc

Low Level: 10 to 50 μA/10 to 50mV

Contact Load Ratings (AC) Resistive: 250 mA/115Vac, 60 and 400 Hz (Case undergrounded)

100 mA/115Vac, 60 and 400 Hz (Case grounded)

Contact Life Ratings

10,000,000 cycles (typical) at low level

1,000,000 cycles (typical) at 0.5A/28Vdc resistive

100,000 cycles min. at all other loads specified above

Contact Overload Rating 2A/28Vdc Resistive (100 cycles min.)

Contact Carry Rating Contact factory

Coil Operating Power 450 milliwatts typical at nominal rated voltage at 25°C

Operate Time 2.0 msec max. at nominal rated coil voltage

Release Time S114 Series: 1.5 msec max. S114D, S114DD Series: 4.0 msec max.

Contact Bounce 1.5 msec max.

Intercontact Capacitance 0.4 pf typical

Insulation Resistance 10,000 megohms min. between mutually isolated terminals

Dielectric Strength Atmospheric pressure: 500 Vrms/60Hz 70,000 ft.: 125 Vrms/60Hz

Negative Coil Transient (Vdc) S114D, S114DD 1.0 max

Diode P.I.V. (Vdc) S114D, S114DD 100 min.

BASE PART

NUMBERS

(See Note 10 for full P/N example)

S114-5

S114D-5

S114DD-5

S114-6

S114D-6

S114DD-6

S114-9

S114D-9

S114DD-9

S114-12

S114D-12

S114DD-12

S114-18

S114D-18

S114DD-18

S114-26

S114D-26

S114DD-26

Coil Voltage (Vdc) Nom. 5.0 6.0 9.0 12.0 18.0 26.5

Max. 5.8 8.0 12.0 16.0 24.0 32.0

Coil Resistance

(Ohms ±10% @25°C)

S114, 114D 50 98 220 390 880 1560

S114DD (Note 4) 39 78 220 390 880 1560

Coil Current (mAdc @25°C)

(S114DD Series only) (Note 5) Min. 93.2 57.8 33.0 25.6 17.5 14.8

Max. 128.2 74.8 42.9 32.8 22.1 18.5

Pick-up Voltage (Vdc, Max.) S114, S114D 3.5 4.5 6.8 9.0 13.5 18.0

S114DD 4.0 5.0 7.8 10.0 14.5 19.0

Drop-out Voltage (Vdc)

S114, 114D Min. 0.14 0.18 0.35 0.41 0.59 0.89

Max. 2.3 3.2 4.9 6.5 10.0 13.0

S114DD Min. 0.6 0.7 0.8 0.9 1.1 1.4

Max. 2.8 3.4 5.3 6.5 10.0 13.0

www.teledynerelays.com S114/1203/Q1

CENTIGRID®AND TO-5

.335 MAX

(8.51)

.031 REF (.79)

4° MAX TYP

.035 REF

(.89)

.200

(5.08)

.375 SQ MAX

(9.53)

.045 MIN 8 PL

(1.14)

.100 4 PL

(2.54)

.200

(5.08)

.410 MIN

(10.41)

.200

(5.08)

.100 TYP (2.54)

(Note 6)

DIMENSIONS ARE SHOWN IN INCHES (MILLIMETERS)

.275 MAX

(6.99) .360 MAX

(9.14)

Ø.017 REF

(.43) 2° ±2° TYP

.378 +.030

–.020 TYP

9.60 +.76

–.51

()

OUTLINE DIMENSIONS AND RECOMMENDED PAD LAYOUT (Notes 7, 8 & 9)

GENERAL NOTES

1. Relay contacts will exhibit no chatter in excess of 10 msec or transfer in excess of

1 msec.

2. “Typical” characteristics are based on available data and are best estimates. No on-going

verification tests are performed.

3. Unless otherwise specified, parameters are initial values.

4. For reference only. Coil resistance not directly measurable at relay terminals due to

internal series diode.

5. Measured at nominal voltage for 5 sec. max.

6. Position of leads as they emerge from relay base.

7. Leads will fit noted pad layout with no overhang.

8. Lead ends are coplanar within .008" wide tolerance zone.

9. Terminals coated with SN60 or SN63 solder per QQ-S-571. Kovar exposed at sheared

end of leads.

10.

543

781

S114

S114D

S114DD

543

781

(±)

(+)

543

781

(±)

(+)

TERMINAL LOCATIONS

& SCHEMATIC DIAGRAMS

SCHEMATICS ARE VIEWED

FROM TERMINALS

SERIES S114

Teledyne Part Numbering System for Surface Mount Relays

SURFACE

MOUNT

S 114 D - 26

SERIES NO.

D = SUPPRESSION DIODE

DD = SUPPRESSION AND POLARITY PROTECTION DIODES COIL VOLTAGE

11. Add "/R" to end of part number for RoHS compliant solder coated pins (Sn99.3/Cu0.7).

Pad designation and

bottom view dimensions Height For use with the following: Dim. H

Max.

“M4” Pad for TO-5

ER411T

ER412, ER412D, ER412DD .295 (7.49)

712, 712D, 712TN,

RF300, RF310, RF320 .300 (7.62)

ER420, ER422D, ER420DD, 421,

ER421D, ER421DD, ER422, ER422D,

ER422DD, 722, 722D, RF341

.305 (7.75)

ER431T, ER432T,

ER432, ER432D, ER432DD .400 (10.16)

732, 732D, 732TN, RF303, RF313,

RF323 .410 (10.41)

RF312 .350 (8.89)

“M4” Pad for TO-5

ER411, ER411D, ER411DD .295 (7.49)

ER431, ER431D, ER431DD .400 (10.16)

RF311 .300 (7.62)

RF331 .410 (10.41)

“M4” Pad for Centigrid®

172, 172D .305 (7.75)

ER114, ER114D, ER114DD,

J114, J114D, J114DD .300 (7.62)

ER134, ER134D, ER134DD,

J134, J134D, J134DD .400 (10.16)

RF100 .315 (8.00)

RF103 .420 (10.67)

“M9” Pad for Centigrid®

122C, A152 .320 (8.13)

ER116C, J116C .300 (7.62)

ER136C, J136C .400 (10.16)

RF180 .325 (8.25)

A150 .305 (7.75)

Notes:

1. Spacer pad material: Polyester  lm.

2. To specify an “M4” or “M9” spacer pad, refer to the mounting variants portion of the part numbering

example in the applicable datasheet.

3. Dimensions are in inches (mm).

4. Unless otherwise speci ed, tolerance is ± .010 (.25).

5. Add 10 m to the contact resistance show in the datasheet.

6. Add 0.01 oz. (0.25 g) to the weight of the relay assembly shown in the datasheet.

Ø.150

[3.81]

(REF)

Dim H

MAX

Dim H

MAX

Dim H

MAX

.156

[3.96]

(REF)

.256

[6.5]

(REF)

Dim H

MAX

Appendix A: Spacer Pads

Pad designation and

bottom view dimensions Height For use with the following: Dim. H

Max.

“M” Pad 5/ 6/

ER411T, J411T, ER412, ER412D

ER412DD, J412, J412D, J412DD

ER412T, J412T

.388 (9.86)

712, 712D, 712TN .393 (9.99)

ER431T, J431T, ER432, ER432D

ER432DD, J432, J432D, J432DD

ER432T, J432T

.493 (12.52)

732, 732D, 732TN .503 (12.78)

ER420, J420, ER420D, J420D

ER420DD, J420DD, ER421, J421

ER421D, J421D, ER421DD

J422D, ER422DD, J422DD, 722

.398 (10.11)

“M2” Pad 7/ 8/

ER411T

ER412, ER412D, ER412DD

J412, J412D, J412DD

.441 (11.20)

712, 712D .451 (11.46)

ER421, ER421D, ER421DD

722, 732D .451 (11.46)

ER431T

ER432, ER432D, ER432DD .546 (13.87)

732, 732D .556 (14.12)

“M3” Pad 5/ 6/ 9/

ER411, ER411D, ER411DD

ER411TX

ER412X, ER412DX, ER412DDX

ER412TX

.388 (9.86)

712X, 712DX, 712TNX .393 (9.99)

ER420X, ER420DX, ER420DDX

ER421X, ER421DX, ER421DDX

ER422X, ER422DX

ER422DDX, 722X, 722DDX

.398 (10.11)

ER431, ER431D, ER431DD

ER431TX

ER432X, ER432DX, ER432DDX

ER432TX

.493 (12.52)

732X, 732DX, 732TNX .503 (12.78)

Notes:

1. Spreader pad material: Diallyl Phthalate.

2. To specify an “M”, “M2” or “M3” spreader pad, refer to the mounting variants portion of the part number example

in the applicable datasheet.

3. Dimensions are in inches (mm).

4. Unless otherwise speci ed, tolerance is ± .010” (0.25).

5/. Add 25 m to the contact resistance shown in the datasheet.

6/. Add .01 oz. (0.25 g) to the weight of the relay assembly shown in the datasheet.

7/. Add 50 m to the contact resistance shown in the datasheet.

8/. Add 0.025 oz (0.71 g) to the weight of the relay assembly shown in the datasheet.

9/. M3 pad to be used only when the relay has a center pin (e.g. ER411M3-12A, 722XM3-26.)

.370 [9.4]

MAX SQ

.150

[3.81]

.100

[2.54]

.200

[5.08]

.300

[7.62]

.100

[2.54]

Dim H

MAX

.370

[9.4]

MIN

.014

[0.36]

(REF)

.390 [9.91]

.300

[7.62]

.100

[2.54]

.300

[7.62]

.100

[2.54] .150

[3.81]

.150

[3.81]

.130

[3.3]

Dim H

MAX

.370 [9.4]

MAX SQ

.150

[3.81]

.100

[2.54]

.200

[5.08]

.300

[7.62]

.100

[2.54]

Dim H

MAX

.370

[9.4]

MIN

.014

[0.36]

(REF)

Appendix A: Spreader Pads

.100

[2.54]

.100

[2.54]

.100

[2.54]

"Y" POSITION

"Z" POSITION

.100

[2.54]

.100

[2.54]

.100

[2.54]

"W" POSITION

"U" POSITION

(ER116C and ER136C only)

"X" POSITION

"Z" POSITION

"Y" POSITION

.050

[1.27]

36°±3°

Ø.200

[Ø5.08]

"Z" POSITION

"Y" POSITION

"X" POSITION

45°±3°

"Z" POSITION

"Y" POSITION

Ø.200

[Ø5.08]

Centigrid® Relays:

RF100, RF103, ER114, ER134, 172

Centigrid® Relays:

RF180, ER116C, 122C, ER136C

TO-5 Relays:

ER411T, ER412, ER412T, ER420, ER421, ER422,

ER431T, ER432, ER432T, 712, 712TN, 400H, 400K,

400V, RF300, RF303, RF341, RF312, RF310, RF313,

RF320, RF323

TO-5 Relays:

ER411, ER431, RF311, RF331

NOTES

1. Terminal views shown

2. Dimensions are in inches (mm)

3. Tolerances: ± .010 (±.25) unless otherwise speci ed

4. Ground pin positions are within .015 (0.38) dia. of true position

5. Ground pin head dia., 0.035 (0.89) ref: height 0.010 (0.25) ref.

6. Lead dia. 0.017 (0.43) nom.

Indicates ground pin position

Indicates glass insulated lead position

Indicates ground pin or lead position

depending on relay type

Appendix A: Ground Pin Positions