MGBBT-00296-P REV
3-1879385-6 BA
Product XFMR EP13 SMD, ROHS MGBBT-00114
Description Previously MGBBT-00296
Primary Units are in inches millimetres in brackets
Electrical Specifications at +20° C unless noted otherwise
Test Limits Unit Tol. Notes
Inductance 3.00 mH ±10% 1-5 tie( 2+4 ), 10kHz, 100mVAC, Ls.
Leakage
Inductance
29.0 μH Max. 1-5 tie( 2+4, 9+7 ), 100kHz, 100mVAC,Ls.
DC Resistance 0.660 Ω Max. Pins 9 - 7
DC Resistance 3.30 Ω Max. Pins 1 – 5 tie(2 + 4)
Turns Ratio 4.5 : 1.00 -- ±1% ( 1-5 ) : ( 9-7 ) tie( 2+4 ), 10KHz, 100mVAC
Dialectric 1,875 VAC 500μA 1-9 tie( 2+4 ), 1 second test, 500uA maximum
Interwinding
Capacitance
75.0 pF Max. 1-9 tie( 1+2+4+5, 7+9 ), 100kHz, 100mVAC,Cs.
Total Harmonic
Distortion
-84.0 dB Max. 10kHz, 4.0Vrms [ 11.31 Vp-p ], Line : IC
Total Harmonic
Distortion
-76.0 dB Max. 3k (2nd Harmonic)Hz, 1.0Vrms [ 2.83 Vp-p ], Line : IC
Total Harmonic
Distortion
-84.0 dB Max. 3k (3rd Harmonic)Hz, 1.0Vrms [ 2.83 Vp-p ], Line : IC
Longitudinal
Balance (ITU)
55.0 dB Min. 5kHz - 400kHz.
Terminal Plating is Hot-dipped SnAgCu over Ni
260°C Maximum wave solder temperature per J-STD-020
Operating Temperature range -40°C to +85°C
Meets requirements of IEC60950 for basic insulation, 250V working voltage
The information contained in this drawing is the sole property of Tyco Electronics. Any reproduction or use without
the written permission of Tyco Electronics is prohibited.
Specifications subject to change without notice. For latest revision visit http://www.tycoelectronics.com
Page 1 of 1 Date 20/01/09
