MAX14578AE, MAX14578E USB Battery Charger Detectors - Overview
http://www.maxim-ic.com/datasheet/index.mvp/id/7094[1/9/2012 9:46:56 AM]
Login Register English
Products Solutions Design Buy Support About Us My Maxim
Maxim > Products > Analog Switches and Multiplexers > MAX14578AE, MAX14578E
MAX14578AE, MAX14578E
USB Battery Charger Detectors
Smallest Complete Port Detection Devices to Support USB and Apple Chargers
Overview Technical Documents Ordering Info Related Products User Comments (0) All
Status
Active: Data sheet on request only
Description
The MAX14578E/MAX14578AE are USB charger detectors compliant with USB Battery Charging Revision 1.1.
The USB charger detection circuitry detects USB standard downstream ports (SDP), USB charging
downstream ports (CDP), or dedicated charger ports (DCP), and controls an external lithium-ion (Li+) battery
charger.
The MAX14578E/MAX14578AE implement USB Battery Charging Revision 1.1- compliant detection logic
including data contact detection, D+/D- short detection, charging downstream port identification, and optional
USB dead battery charging support. Dead battery charging support features a 45 minutes (max) charge timer
and weak battery voltage monitor controlled by I²C communication (MAX14578E only.) The MAX14578AE
features an enable (EN) input and an LDO output.
In addition, the internal USB switch is compliant to Hi-Speed USB, Full-Speed USB, and Low-Speed USB
signals. The devices feature low on -resistance, low on -resistance flatness, and very low capacitance. The
MAX14578E/MAX14578AE feature high -ESD protection up to ±15kV Human Body Model on the CD+ and CD -
pins.
In addition, the MAX14578E/MAX14578AE feature Apple and Sony® charger detection that allows
identification of resistor divider networks on D+/D-.
The MAX14578E/MAX14578AE are available in a 12-bump, 0.4mm pitch, 1.3mm x 1.68mm WLP package
and operate over the - 40°C to +85°C extended temperature range
Data Sheet
Request Full Data Sheet
An evaluation kit is available: MAX14578EVKIT
Key Features
Compliant to USB Battery Charging Revision 1.1
Data Contact Detection for Foolproof Connector Insertion
Detection
USB Dead Battery Charging Support
Charging Downstream Detection
Apple/Sony Charger Detection
Dedicated Charger Detection
China YD/T1591 - Compliant Charger Detection
Internal Switches Isolate the USB Transceiver During the
Charger Detection Process
VBUS Connection Capable of 28V
Device Status Change Interrupt
Low Supply Current
High ESD Protection on CD+ and CD -
±15kV Human Body Model
±8kV IEC 61000- 4-2 Contact Discharge
Applications/Uses
Cell Phones
DSC and Camcorder
e -Book Readers
Media Players
MID (Mobile Internet Device)