Copyright ©2008 by Zilog®, Inc. All righ ts reserved.
www.zilog.com
Z8 Enco re! XP® Microcontroller
User Manual
UM018705-0508
Z8 Encore! XP® F042A Series
8-Pi n Deve lopm ent Kit
Z8 Encore! XP ® F042A Series 8-Pin Development Kit
User Manual
UM0187 05-0508 Revision History
ii
Revision History
Each insta nce in Revision Hist ory r eflects a cha nge to this document fr om
its previous revision. For more details, refer to the cor responding pages
and appropriate links in the table below.
Date Revision
Level Description Page No
May 2008 05 Updated Introduction and Table 1.1 and 8
March
2008 04 Changed title to Z8 Encore! XP
F042A Series 8-Pin Development Kit .
Updated Syst em Requirem ents,
Installation, Documentation, and Use
of Ceramic Resonator Y1 sections.
Added Zilog Help Options section.
All
February
2008 03 Updated new Zilog logo, implemented
Style guide, and changed ZiLOG to
Zilog.
All
May 2005 02 Updated Figure 1 and Figure 2.2 and 5
January
2005 01 Original Issue. All
Z8 Encore! XP® F042A Seri es 8-Pin Develo pmen t Kit
User Manu al
UM018705-0508 Table of Contents
iii
Table of Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Kit Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Software (on CD-ROM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Designing with the USB Smart Cable . . . . . . . . . . . . . . . . . . . . . 4
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Development Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
MCU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
UART with IrDA ENDEC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Jumpers and Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
DEMO Mode Jumper Settings . . . . . . . . . . . . . . . . . . . . . . . . . 10
USER DEBUG Mode Jumper Settings . . . . . . . . . . . . . . . . . . . 10
Switches S 1, S2, and SW1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 0
External Interface Headers JP 1 and JP2 . . . . . . . . . . . . . . . . . . . . 11
Use of Ceramic Resonator Y1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1
Zilog He lp Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Schematics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2
Customer Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 4
Z8 Encore! XP® F042A Seri es 8-Pin Develo pmen t Kit
User Manu al
UM018705-0508 Introduction
1
Introduction
Zilog’s Z8 Encore! XP® F042A Series 8-pin mi crocontroll er unit (MCU)
is part of the Zilog MCU products. The Z8 Encore! XP F 042A Series 8-
Pin development kit (Z8F04A08100KITG) enable s you to become famil-
iar with the hardware and softwar e tools availab le with t his product. This
kit consists of 4 KB version of the Z8 Encore! development board that
supports and presents the features of the Z8 Encore! XP F042A Series 8-
pin package. This kit allows you to write application software and con-
tains all supporting documents. Z8F042ASB020 is the silicon used in the
board. For more infor mation, refer to Z8 Encore! XP® F082A Series
Product Specification (PS0228).
This user manual acquaints you with the Z8 Encore! XP F042 A Series 8-
pin MCU development kit, and gives ins tr uctions on setting up and using
the tools to start building desi gns and applicatio ns.
Kit Contents
The Z8 Encore! XP F042A Series 8-Pin MCU development kit contains
the following:
Hardware
The hardware components include:
•
Z8 Encore! XP F042A Series 8-pin development board
•
USB Smart Cable for PC to Z8 Encore! XP F042A Series 8-pin
development board
•
5 V DC power supply
Z8 Encore! XP® F042A Seri es 8-Pin Develo pmen t Kit
User Manu al
UM018705-0508 Introduction
2
Figure 1. Z8 Encore! XP F042A Series 8-Pin Development Kit Contents
(Printed Q uick Start Guide Not Shown)
Software (on CD-ROM)
The software components include:
•
ZDS II—Z8 Encore!® IDE with ANSI C-Compiler
•
Sample code
•
Document browser
•
Acrobat Reader
Development
Board
Packaging
CD-ROM Contai ning
Documentation
Power
Supply USB Smart Cable
Z8 Encore! XP® F042A Seri es 8-Pin Develo pmen t Kit
User Manu al
UM018705-0508 Introduction
3
Documentation
The documentation includes:
•
Quick Start Guide (QS0055)
•
Z8 Encore! XP F042A Series 8-pin technical documentation (on CD-
ROM)
– Development Kit User Manual
– ZDS II—IDE User Manual (UM0130)
–eZ8
TM CPU User Manual (UM0128)
– Application Notes
The sample code is installed with ZDS II and is located at <installa-
tion directory>\samples in the disk drive.
The documenta tion can be ins talled with the DemoShield interface or can
be viewed on the CD-ROM using the DemoShield menus and a PDF
reader. A copy of the acroba t installer is provided on the
CD-ROM and can be installe d from the DemoShield install screen. After
installing the documenta tion on the system Windows Explore r can be
used to select any document to be viewed with the PDF file viewer.
System Requirements
IBM PC (or compa tible computer) wit h the following minimum
configurations is requi red:
•
Microsoft Windows XP Professional SP1/Windows 2000 SP3/
Windows 98 SE
•
Pentium II/233 MHz processor or higher up to Pentium IV, 2.8 GHz
•
96 MB RAM or mor e
•
35 MB hard disk space or more
•
Super VGA video adapter
Z8 Encore! XP® F042A Seri es 8-Pin Develo pmen t Kit
User Manu al
UM018705-0508 Introduction
4
•
CD-ROM
•
One USB high-speed or full-speed port on the host chassis or a
pow er ed H ub
Designing with the USB Smart Cable
Z8 Encore ! XP® F042A Seri es 8-pin devel opment kit use s the USB Smart
Cable provided in the kit. The Z8 Encore! Serial Smart Cable and
associated TIM will not work with the Z8F04A08100KITG kit. Include
the following when designing the targe t board and applicati on:
•
The target design’s debug interface must include a RESET pin.
•
The target application must allow the RESET pin to be pulled LOW.
For more details, refer to Z8 Encore! XP® F082A Series Pr oduct Specifi-
cation (PS0228).
Installation
For details on software installation and setup of the Z8 Encore! XP
F042A Serie s 8-pin development kit r efe r to Z8 Encore! XP® F042A 8-
Pin Development Kit Quick Start Guide (QS0055).
Z8 Encore! XP® F042A Seri es 8-Pin Develo pmen t Kit
User Manu al
UM018705-0508 Development Board
5
Develop men t Board
Introduction
Z8 Encore ! XP® F042A Serie s 8-pin deve lopment boa rd i s a dev elopment
and prototyping board for the Z8 Encore! XP F042A Serie s 8-pin MCU.
The board provides a tool to ev aluate feature s of Z8 Encore! XP F042A
Series 8-pin MCU, and to start developing an application before build ing
the hardware.
Figure 2. Z8 Encore! XP F 042A Series 8-Pin Developm en t Board
DBG
Pin 1
Resonator
not installed
on production
units
Z8 Encore! XP® F042A Seri es 8-Pin Develo pmen t Kit
User Manu al
UM018705-0508 Development Board
6
Features
The features of Z8 Encore! XP® F042A Series 8-pin de velopment board
include:
•
Z8 Encore!® MCU (8-pin SOIC)
•
3 LEDs
•
RS-232 interface
•
IrDA transceiver
•
Two pushbuttons: RESET and TEST
•
5 V DC power connector
•
On-Chip Debugger interface
•
Prototyping area
•
External interface connectors JP1 and JP2
•
2.7 V–3.6 V operating voltage with 5 V-tolerant inputs
MCU
Z8 Encore! XP F042A Series 8-pin MCU is member of a family of
Zilog® MCU pr oducts based upon the 8-bit eZ8™ core CPU. The Flash
in-cir cuit prog ramming capabil ity allows for faster deve lopment time and
program changes in the field. The eZ8 core CPU is upward compatible
with existing Z8® instructions . The rich peripheral set of the Z8 Encore!
XP F042A Series makes it suitable for a variety of applications includi ng
motor control, security systems, home appliances, personal elec tronic
devices, and sensors.
The development board contains circuitry to support and present all the
features of the Z8 Encore! XP F042A Series.
Z8 Encore! XP® F042A Seri es 8-Pin Develo pmen t Kit
User Manu al
UM018705-0508 Development Board
7
The key features of the Z8 Encor e! XP® F04 2A Series 8- pin MC U
include:
•
eZ8™ core CPU
•
4 KB Fla sh memory with in- circuit programming capabil ity
•
1 KB register RAM
•
5-channel, 10-bit analog-to-digital convert er (ADC)
•
Full-duplex UART
•
Infrar ed Data Associati on (IrDA)-c ompliant inf rare d enc oder/decode r
•
Two 16-bit timers with capt ure, compare, and PWM capabili ty
•
Watchdog T imer (WDT) with interna l RC oscillator
•
Six I/O pins
•
Programmable priority int errupts
•
On-Chip Debugger
•
Voltage Brownout (VBO) Protection
•
Power-On Reset (POR)
•
2.7 V–3.6 V operating voltage with 5 V-tolerant inputs
•
Operating temperatures: 20 °C ±10 °C
For more information on the Z8 Encore!® f amily of devices, refer to Z8
Encore! XP® F082A Series Produc t Specification (PS0228), av ai l able for
download at www.zilog.com.
UART with IrDA ENDEC
Z8 Encore! XP F042A Series 8-pin MCU (component U5) contains a
fully-f unctional, hi gh-performance UAR T with Infrared Encoder/De coder
(endec). The Infrared endec is inte grated with an on-chip UART all owing
easy communication between the Z8 Encore! XP F042A Serie s
Z8 Encore! XP® F042A Seri es 8-Pin Develo pmen t Kit
User Manu al
UM018705-0508 Development Board
8
8-pin MCU and IrDA transceive rs. Infrar ed communic ation provides
secure, reliable, low-cost, point-to-point communication betwee n PCs,
PDAs, cell phones, printers, and other infrared enabled devices.
Jumpers an d S ettings
Table 1 lists infor mation on jumper functions.
Table 1. Z8F04A08100KITG Jumper Functions
Jumper State Description Default
J1* OUT Enables RS -232 interface X
IN Disables RS-232 interface
J2* OUT Enables IrDA interface
IN Disables IrDA interface X
J3 1-2 Connects U5 pin PA0 to Green LED D2 X
2-3 Connects U5 pin PA0 to JP2 pin 18
J4 OUT Disconnects PA0 from debug (DBG) pin X
IN Connects PA0 to DBG pin 4 on ZDI port P3
J5 1-2 Connects U5 pin PA1 to yell ow LED D3 X
2-3 Connects U5 pin PA1 to JP2 pin 20
J6 1-2 Connects U5 pin PA2 to red LED D4 X
2-3 Connects U5 pin PA2 to JP2 pin 22
Z8 Encore! XP® F042A Seri es 8-Pin Develo pmen t Kit
User Manu al
UM018705-0508 Development Board
9
The board has two modes of operation: DEMO and USER DEBUG. Use
DEMO mode to run the sample program included with the kit. Run the
board in USER DEBUG mode:
•
When using the ZDI port to debug your code.
•
When configuring the board to run your own prototyp e code.
J7 OUT DEMO mode setting X
IN Chip U5 re sets when SW1 pressed
J8 1-2 Connects U5 pin PA3 to J11 pin 1 (CTS0
EN) X
2-3 Connects U5 pin PA3 to JP2 pin 35
J9 1-2 Connects U5 pin PA4 to RXD RS232 signal X
2-3 Connects U5 pin PA4 to JP2 pin 35
J10 1-2 Connects U5 pi n PA5 to TXD RS232 s ignal X
2-3 Connects U5 pin PA5 to JP2 pin 36
J11 OUT Disconnects PA3 from CTS0 RS232 signal X
IN Connects PA3 to CTS0 RS232 signal
*These jumpers must not be OUT at the same time
Table 1. Z8F04A08100KITG Jumper Functions (Continued)
Jumper State Description Default
Z8 Encore! XP® F042A Seri es 8-Pin Develo pmen t Kit
User Manu al
UM018705-0508 Development Board
10
DEMO Mode Jumper Settings
When running the board in DEMO mode, the following jumpers must be
set:
•
J3 1-2
•
J4 OUT
•
J5 1-2
•
J6 1-2
•
J7 OUT
•
J8 1-2
•
J9 1-2
•
J10 1-2
•
J11 OUT
USER DEBUG Mode Jumper Settings
When running the board in USER DEBUG mode, the following jum pe rs
must be set:
•
J3 OUT
•
J4 IN
•
J6 OUT
•
J7 IN
Swit c hes S1, S2 , and SW 1
Switches S1, S2, and SW1 on the Z8 Encore! XP® F042A Series 8-pin
development board perform the following functions:
•
S1–Test switch
Z8 Encore! XP® F042A Seri es 8-Pin Develo pmen t Kit
User Manu al
UM018705-0508 Development Board
11
•
S2–Power ON/OFF switch
•
SW1–RESET
External Interface Head ers JP1 and JP2
External inter face heade rs JP1 an d JP2 are displayed in the Schematics on
page 12.
Use of Ceramic Resonator Y1
When using ceramic resonator Y1, pins PA0, PA1, and DBG are
unavaila ble. For mor e infor mation , refer t o Z 8 Encore ! XP® F0 82A Serie s
Product Specification (PS0228).
Zilog Help Options
Refer to the readme.txt and FAQ.html included in the ZDS II installa-
tion direc tory; ZDS II On -Line Help a nd Deve lopmen t Ki t User Manuals.
For Silicon issues, refer to the related Silicon Product Specific ation. To
locate all documentatio n included in the kit, refer to the docum entation
browser located at:
<Installation Directory>\ZDSII_Z8Encore!_
<Version_Number>\Documentation
For latest updates on FAQs and to find answers, please conta ct Customer
Support.
UM018705-0508 Schematics
Z8 Encore! XP® F042A Series 8-Pin Developm ent Kit
U ser Man ua l
12
Schematics
Figure 3 and Figure 4 on page 13 display the schematic s for Z8 Encore! XP F042A Seri es 8-pin development boar d.
Figure 3. Schematic for Z8 Encore! XP F042A Series 8-Pin MCU Development Board
CONSO
LE
GND
USER
DBG
INTERFAC
E
DIS RS
232
DIS IR
DA
3.3 OK
CTS0
EN
ON
OF
F
XP 4K 8 pin MD
S Processor Module. Schematic.
Title
Siz
e
Document Number
Rev
TXD0
GND
CTS0
RXD
0
VCC_33V
DBG
PA4_RXD
0
PA5_TX
D0
IRDA_SD
GND
VCC_33V
GND
VCC_33V
PA5_TX
D0
VCC_33V
PA4_RXD
0
GND
VCC_33V
GND
-RESET
GND
GND
5V
VCC_33V
VCC
GND
VCC_33V
GND
VCC_33V
GND
VCC_33V
GND
VCC_33V
GND
PA3_CTS
0
PA3_CTS
0
DBG
-DIS_IRDA
-DIS_232
PA5_TX
D0
PA4_RXD
0
VCC_33V
GND
-RESE
T
C2
0.1uF
R5
68
+
C7
10/6
U3E
74LVC04/SO
11 10
147
C4
0.1uF
U3A
74LVC04/SO
1 2
147
R3
0
C6
0.1uF
J1
1
2
U3D
74LVC04/SO
9 8
147
P3
Header 3x2
12
34
56
R2
10K
U3B
74LVC04/SO
3 4
147
U2
SPX2815AU-3
.3
1
3 2
GND
VIN
VOUT
R4
0
U3F
74LVC04/SO
13 12
147
C1
0.1uF
J2
1
2
C9
330nF
R1
68
0
R8
0
R6
2R7
C5
0.1uF
U4
ZHX181
0
2
4
3
1
5
6
0
TXD
SD
RXD
LEDA
VCC
GND
T
P1
PWR JACK
2
3
1
S2
SW KEY-SPDT
J11
HEADER 2
1
2
C8
0.1uF
R7
10K
+
C3
10/6
R9
0
P2
DB9 Female
5
9
4
8
3
7
2
6
1
U3C
74LVC04/SO
5 6
147
U1
SP3222EBCA
1
2
4
5
6
13
12
15
10
3
7
17
8
16
9
20
1918
11
14
EN
C1+
C1-
C2+
C2-
T1IN
T2IN
R1OUT
R2OUT
V+
V-
T1OUT
T2OUT
R1IN
R2IN
SHDN
VCCGND
NC
NC
TP1
1
2
3
4
5
D1
LED
21
R10
10K
TP
2
1
2
3
4
5
UM018705-0508 Schematics
Z8 Encore! XP® F042A Series 8-Pin Developm ent Kit
U ser Man ua l
13
Figure 4. Schematic for Z8 Encore! XP F042A Series 8-Pin MCU Development Board
connecto
r 2
Connector
JP1
for referen
ce
only
Note
1:
If Module is plugged onto the De
v Platform the local
RS232 interface is disabled
by pin 50 of JP2
8 pin foot
print
RESET
NOTE
2
Note 2:
The XP supports internal oscillator, extern
al crystal, or ceramic
resonator, external R/C and external CMOS dr
ive clock modes. R16,
R17, R19, R20, R21, C10, C11 and Y1 are used to
support the clock mode
selected. The development board is shipped c
onfigured for internal
oscillator. When using internal oscilator, p
ins 2 and 3 could be used
as GPIO ports PA0 and PA1. Table 1 shows th
e recommended clock mode
configurati
ons.
Clock Mode R16 R17 R19 R20
R21 C10 C11 Y1
Internal Note 2 Note 2 none none no
ne none none none
Ceramic Res none none 0 Ohm 0 Ohm 22
0K 10-20pF 10-20pF user
select
Crystal none none 0 Ohm 0 Ohm 22
0K 10-20 pF 10-20 pF user
select
TABLE
1
TES
T
PA0
DEMO USER
PA1
PA2
DEMO USER
DEMO USER
PA3
PA4
PA5
DEMO USER
DEMO USER
USERDEMO
RESET
96C
0964-001
B
XP 4K 8pin
MDS Processor Module. Schematic.
B
22
Tuesday, December 14, 2004
Title
Siz
e
Document Number
Rev
Date:
Sheet
of
A20
-CS0
A12
-IOREQ
-F91_WE
A13
GND
GND
A17
A21
VCC_33V
A14
D1
VCC_33V
D7
-DIS_FLASH
GND
A6 A0
D3
D6
-BUSACK
A3
D2
VCC_33V
A15
A4
-TRS
TN
D0
-MREQ
A7
A10
A9
A16A18
A11
-INSTRD
A19
A5
GND
D5
-CS1
A22
A1A2
-CS2
-RD
A8
GND
D4
A23
-WR
-BUSREQ
GND
PA3_MDS
VCC_33V
PA2_MDS
PA1_MDS
GND
GND
PA4_MDS PA5_MDS
GND
GND
PA0_MDS
GND
VCC_33V
-DIS_IrDA
PA2_JP
GND
PA5_JP
PA3_JP
PA4_JP
PA0
PA1
GND
VCC_33V
PA0_JP
PA1_JP
PA0_JP
PA1_JP
PA2_JP
PA3_JP
PA4_JP
PA5_JP
PA5_T
XD0
PA4_RXD
0
PA3_CTS
0
LED_R
LED_G
PA0_MDS
PA1_MDS
PA2_MDS
PA3_MDS
PA4_MDS
PA5_MDS
VCC_33VVCC_33VVCC_33VVCC_33VVCC_33VVCC_33V
PA3_CTS
0
-RESE
T
-RESE
T
VCC_33V
DBG
LED_Y
VCC_33V
GND
VCC_33V
-DIS_IRDA
-DIS_232
PA5_TX
D0
PA3_CTS
0
PA4_RXD
0
-RESET
DBG
J6
Header 3
1
2
3
U5
Z8F04xA_8pin
4
3
2 7
6
5
81
PA2
PA1
PA0 PA5
PA4
PA3
VSS
VDD
R19
0
SW1
J5
Header 3
1
2
3
C11
R20
0
J10
Header 3
1
2
3
D4
LED
RED
2 1
R15
10
0
J3
Header 3
1
2
3
D3
LED
YEL
2 1
C13
Y1
20 MHz
1
2
3
1
2
3
D2
LED
GREEN
2 1
S1
1 2
R13
10
0
J9
Header 3
1
2
3
J7
HEADER 2
1
2
R21
220K
R16
0
R11
10
0
C10
J4
HEADER 2
1
2
JP2
HEADER 30x2/SM
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
43
45
47
49
51
53
55
57
59
J8
Header 3
1
2
3
R14
10K
R12
10K
R17
0
JP1
HEADER 30x2/SM
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
43
45
47
49
51
53
55
57
59
Z8 Encore ! XP® F042A Series 8-Pin Development Kit
User Manual
UM018705-0508 Customer Support
14
Customer Support
For answers to technical questi ons about the product, documentation, or
any other issues with Zilog’s offerings, please visit Zilog’s Knowledge
Base at http://www.zilog.com/kb.
For any comments, detail technical questions, or reporting problems,
please visit Zilog’s Technical Support at http://support.zilog.com.
Z8 Encore ! XP® F042A Series 8-Pin Development Kit
User Manual
UM018705-0508
15
DO NOT USE IN LIFE SUPPORT
LIFE SUPPORT POLICY
ZILOG’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL
COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE
EXPRESS PRIOR WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL
COUNSEL OF ZILOG CORPORATION.
As used herei n
Life support devices or systems are devices which (a) are intended for surgical implant
into the body, or (b) support or sustain life and whose failure to perform when properly
used in accordance with instructions for use provided in the labeling can be reasonably
expected to result in a significant injury to the user. A critical component is any
component in a life support device or system whose failure to perform can be re asonably
expected to cause the failure of the life support device or system or to affect its safety or
effectiveness.
Document Disclaimer
©2008 by Zilog, Inc. All rights reserved. Information in this publication concerning the
devices, applications, or technology described is intended to suggest possible uses and
may be superseded. ZILOG, INC. DOES NOT ASSUME LIABILITY FOR OR
PROVIDE A REPRESENTATION OF ACCURACY OF THE INFORMATION,
DEVICES, OR TECHNOLOGY DESCRIBED IN THIS DOCUMENT. ZILOG ALSO
DOES NOT ASSUME LIABILITY FOR INTELLECTUAL PROPERTY
INFRINGEMENT RELATED IN ANY MANNER TO USE OF INFORMATION,
DEVICES, OR TECHNOLOGY DESCRIBED HEREIN OR OTHERWISE.The
information contained within this document has been verified according to the general
principles of electrical and mechanical engineering.
Z8, Z8 Encore!, and Z8 Encore! XP are registered trademarks of Zilog, Inc. All other
product or service names are the property of their respect ive owners.
Warning:
