IMPROVED COUPLING OVER THREADED MIL-DTL-5015 The AIB/GT Series replaces the threaded coupling used in MIL-DTL-5015 with a positive, quick-mating, three-point reverse bayonet lock for improved performance. These Amphenol connectors are an ideal cost-effective option for applications requiring reliability in harsh environments, and is the worldstandard for rail, mass transit, and military ground vehicle applications. This series has the same shell dimensions, contact layouts, contacts, and performance characteristics as the MIL-DTL-5015 threaded connectors; however, the two series do not intermate. They are sealed to withstand moisture, condensation, vibration and flash-over. Over 180 contact layouts are available, in variations that allow for just power, just signal, or a mix of both contact types. * Meets NATO specification VG95234 COMMERCIAL & MILITARY APPLICATIONS AIB/GT series connectors are made in accordance with German military specification VG95234 and MIL-DTL-5015. Originally designed for NATO combat vehicles, aircraft, and airborne equipment, these rugged connectors are now in a broad range of demanding commercial applications from trucks to industrial robots. 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 Amphenol AIB/GT Series MIL-DTL-5015 Industrial environments requiring extreme environmental reliability and ease of mating and unmating, such as: * Power generators * Off-road vehicles * Mobile equipment * Battery systems * Earth-moving equipment * Industrial machinery * Engines * Ships * Telecommunications * Sensors * Railroad equipment * Mass transit * Motion control FEATURES SIMPLE AND FAST MATING AND UN-MATING AIB/GT series connectors use a unique "reverse bayonet" coupling system that allows for mating and un-mating with a simple 120 rotation without compromising shock, vibration, or moisture resistance. The large, open ramps are easily cleaned of mud or other contaminants. The ramp coupling system eliminates the possibility of cross-threading and thread damage possible with standard MIL-DTL-5015 threaded connectors. This design is easier to mate in cold weather, tight spaces, or on equipment which must be disassembled frequently. SHOCK AND VIBRATION RESISTANCE AIB/GT series connectors are supplied with military-standard resistant sealing and a three-point bayonet coupling nut. The three-point bayonet coupling incorporates a wave spring and washer specified by the rail industry. AIB/GT series connectors pass the most stringent tests of shock and vibration performance while maintaining proper continuity and water tightness. Rugged aluminum alloy shell and hardware are light in weight yet highly resistant to damage. For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 65 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 FEATURES AUDIBLE, VISUAL, AND TACTILE CONFIRMATION OF MATING AIB/GT series connectors provide three independent checks that the connector halves are mated. When the coupling nut is fully rotated, the three studs snap into the end of the ramps with a loud "click" (audible). The user can feel the bolts click into the grooves (tactile). Blue dots on the receptacle and coupling nut are aligned when the connector is properly mated (visual). ENVIRONMENTAL The sealing is not compromised by any of the operating conditions defined in MIL-DTL-5015 and is completely watertight when mated. BROAD TEMPERATURE RANGE These connectors will operate in temperatures from -67 to +257F (-55 to +125C). High-temperature and zero-halogen insulators are also available. Contact us for ordering information. WIDE RANGE OF WIRE GAUGES AND CURRENT-CARRYING CAPABILITY Up to 150 amps with accommodations for wire gauges from size 26 to size 0 AWG. WIDE VARIETY OF CONTACTS High-reliability screw machine contacts with silver or gold plating are available in sizes from 20 to 0 to accommodate wire gauges from 26 to 0 AWG. Solder, crimp, PC, coax, and thermocouple contacts are available. AIB/GT connectors use rail industry-standard crimp contacts that are completely interchangeable with other rail connectors such as Litton/Veam CIR series. INTERMATEABLE AND INTERMOUNTABLE WITH ALL VG95234 CONNECTORS The standard MIL-DTL-5015 layouts and dimensions ensure intermateability and intermountability with all connectors made in accordance with VG95234. All AIB/GT connectors are intermountable with standard threaded MIL-DTL-5015 connectors, often making it possible to upgrade without changing panel cutouts or clearances. TECHNICAL MATERIALS & FINISHES SPECIFICATIONS Shell Aluminum alloy. (Can be grounded) Plating Olive drab chromate coating over cadmium plating, conductive black alloy, black alloy, electroless nickel, green zinc, and black anodized Contacts Copper alloy Platings Hard silver plating or gold plating Insulator* Neoprene Seals Silicone, Neoprene, or Viton(R)** *Optional zero-halogen and high-temperature insulators are available. Contact us for information. **Viton(R) is a registered trademark of DuPont DOW Elastomers 66 For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support * www.peigenesis.com * sales@peigenesis.com Operating Voltage/Test Voltage according to MIL-DTL-5015H The indicated values for the operating voltage are limits concerning the electrical function. When the working voltage exceeds 50V, safety precautions must be in accordance with the following standards: VDE 0100, IEC 309-1 or applicable national standards. Current Rating CONTACT SIZE TEST CURRENT (AMPS) 16/16S 13 12 23 (60)* 8 46 (69)* 4 80 (120)* 0 150 (225)* *Test amps, multiconductor using Radsok contact Altitude Voltage Derating* Chart NOMINAL DISTANCE MS SERVICE RATING OPERATING VOLTAGE* AIRSPACE CREEPAGE DC V AC VRMS STANDARD SEA LEVEL CONDITIONS PRESSURE ALTITUDE 70,000 FEET PRESSURE ALTITUDE 50,000 FEET MINIMUM MINIMUM MINIMUM TEST TEST TEST FLASHOVER FLASHOVER FLASHOVER VOLTAGE VOLTAGE VOLTAGE VOLTAGE VOLTAGE VOLTAGE AC (RMS) AC (RMS) AC (RMS) AC (RMS) AC (RMS) AC (RMS) I 1/32 1/16 250 200 1,400 1,000 550 400 325 260 A 1/16 1/8 700 500 2,800 2,000 800 600 450 360 D 1/8 3/16 1,250 900 3,600 2,800 900 675 500 400 E 3/16 1/4 1,750 1,250 4,500 3,500 1,000 750 550 440 B 1/4 5/16 2,450 1,750 5,700 4,500 1,100 825 600 480 C 5/16 1 4,200 3,000 8,500 7,000 1,300 975 700 560 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 TECHNICAL ELECTRICAL DATA SPECIFICATIONS *No attempt has been made to recommend operating voltages. The designer must determine own operating voltage by the application of a safety factor to the above derating chart to compensate for circuit transients, surges, etc. Not corrected for changes in density due to variations in temperature. Wire Range Sizes Contact Resistance per MIL-DTL-5015H p 3.15 26 AWG to 0 AWG (See contact selection on a pages 94-97) CONTACT SIZE CONTACT RESISTANCE MILLIOHM MAX. POTENTIAL VOLTAGE DROP IN MILLIVOLTS MAX. 16/16S 6 21 12 3 20 8 1/(0.44)* 12 (20)* 4 0.5/(0.23)* 10 (18)* 0 0.2/(0.18)* 10 (27)* *Using Radsok contact Insulation Resistance @77F (25C) > 5,000 Megohms MECHANICAL Operating Temperature -67 to +257F (-55 to +125C) Neoprene Sealing 33-foot submersible Sealed when mated. IP 67 and NEMA 4P For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 67 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 TECHNICAL SPECIFICATIONS Wire Sealing RangeThe connector is designed for individual wire sealing. Sealing of an outer cable jacket on multiconductor cables must be accomplished with an appropriate endbell. Sealing is only guaranteed if wires used are according to MIL-W-5086 or within the listed ranges. INCHES 16 .064 - .130 12 .114 - .170 2.89 - 4.31 8 .164 - .255 4.16 - 6.47 4 .272 - .370 6.90 - 9.30 0 .415 - .550 10.50 - 13.97 MM 1.62 - 3.30 a pages 94 and 97 Insulation Strip Lengths See Contact Selection Chart on Mating Life 2,000 cycles minimum (AIB/GT) 500 cycles minimum (AIBC/ACA-B) Salt Spray Olive drab chromate over cadmium - 500 hours Black alloy - 48 to 200 hours Conductive black alloy - 48 to 200 hours Black anodized - 500+ hours Electroless nickel - 48 hours Heat Neoprene low-smoke, zero-halogen (LSZH) 257F (+125C); Viton 392F (+200C) Chemical Resistance Diesel Fuel JP-4 Hydraulic Fluid Gasoline 48-hour intermittent spray for each chemical with no deterioration, followed by Contact Retention (CR), Insulation Resistance (IR), Dielectric Withstanding Voltage tests (DWV) Corrosion Resistance Olive Drab Cadmium-Plated 48 hours per MIL-DTL-5015 (3.17/4.6.13) Fluid Immersion Hydraulic Fluid 20 hours per MIL-DTL-5015 (3.19/4.6.15) Lubrication Oil 20 hours per MIL-DTL-5015 (3.19/4.6.15) Vibration Per MIL-STD-810C, method 516.2, procedure VIII 1.0 g peak from 5 to 25 Hz .030" double amplitude from 25 to 57 Hz 5g peak from 57 to 500 Hz Basic Shock Per MIL-STD-810C, method 516.2, procedure I pulse at half-sine wave of 30g for 11 seconds Gun fire Shock Per MIL-STD-810C, method 516.2, procedure IV pulse at half-sine wave of 100g for 1.5 seconds Ballistic Shock Per MIL-STD-810C, method 516.2, procedure IV pulse at half sine wave of 200g for .5 seconds Contact Type Solder, crimp, PC, coax, or thermocouple. Hard silver or gold plating. Contact Insertion From rear with simple hand-tool. Removable, 5 cycles minimum. Contact Retention Pin and socket contacts are designed to resist severe vibration and repeated connection and disconnection. Contact retention and separation is tested according to MIL-DTL-5015H (4.6.6.1) CONTACT SIZE 68 SEALING RANGE CONTACT SIZE RETENTION FORCE MIN. 16 10 12 15 8 20 4 20 0 25 For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support * www.peigenesis.com * sales@peigenesis.com Number of Circuits 1 to 85 Polarization Key and keyway plus three point bayonet with optional rotational polarization. See a pages 83-93. Rear Accessories Maximum Torque SIZE Approvals/Agency Listing AIB/GT SERIES CROSS-SECTION IN./LB. MAX. 10SL 26 14S 44 16 50 16S 50 18 55 20 65 22 85 24 90 28 114 32 120 36 153 40 170 THERMOCOUPLE CODES MATERIAL COLOR CODE CODE Iron Black IR Constantan Yellow CON Copper Alloy - Cu Chromel White CH Alumel Green AL Color code is identified by small dot on wire well end of contact. Thermocouple Types: J = Iron-Constantan K = Alumel-Chromel T = Copper-Constantan E = Chromel-Constantan UL File# E115497 SKID WASHER BAYONET COUPLING NUT RECEPTACLE SHELL BAYONET RAMP SEALING RING 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 TECHNICAL SPECIFICATIONS WAVE SPRING FERRULE (SLEEVE) SOCKET CONTACT PIN CONTACT INDIVIDUAL WIRE SEALING GROMMET ENDBELL INSULATOR FOR SOCKET CONTACT STAINLESS STEEL STUD (OPTIONAL) BAYONET PIN INSULATOR FOR PIN CONTACTS ENDBELL O-RING PLUG SHELL AIB/GT SERIES HOW TO ORDER The next page shows all of the standard possibilities for AIB/GT series connectors. Follow the nine steps to create a description of the connector best suited to your application. This is not an Amphenol part number, but gives you a convenient way to select your connector. Contact us with the description for a valid Amphenol part number. If you prefer to select the Amphenol part number, see the How-To-Order Guide on a pages 70-71. Many additional options not shown are available. Contact us if your needs are not met by the options on the next page. For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 69 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 CREATE YOUR PAR T NUMBER USING THESE NINE STEPS 1 2 3 4 5 6 7 8 9 AIB 6HD F A 24-28 P W S -472 LAYOUT CONTACT ROTATION (omit for normal) CONTACT TYPE CONNECTOR SHELL STYLE TYPE END BELLS CABLE CLAMP/BOOT (If omtting endbell, enter -) (If needed) PLATING/ MODIFICATION STEP 1: S E L ECT CONNECT OR T Y PE AIB* AIBC* * AIBC is the commercial version of the AIB. It comes without wear pins in the receptacles and without wave springs in the coupling nuts. Note: AIBC are fully intermateable with all reverse bayonet connectors. STEP 2: S E L E C T S H E L L ST Y L E, P L U G OR RECEP TACL E PLUGS 6B Box Mount 6 G6 4 6HD Standard Plug RubberCovered RECEPTACLES Mates with 0 Front Wall Mount with Shielded Plug Accessory Threads 30 with Accessory Threads (Most Popular) Rear Mount Jam Nut with Accessory Threads STANDARD SPECIALS -- LOW COST GLAND SEAL with Accessory Threads 20 Front Box Mount with Rear Accessory Threads Heavy-Duty 70 SHIELDED CABLE/HEAT SHRINK 1 Cable Mount Rear Wall Mount 2 Front Box Mount No Accessory Threads 7 Rear Mount Jam Nut TB Thru Bulkhead No Accessory Threads CALL WITH NPT THREAD SIZE, SEALTITE CONDUIT DIAMETER, OR CABLE OUTSIDE DIAMETER. SHIELDED CABLE BANDING INTERNAL THREAD VERSION GLAND SEAL CONDUIT METAL MESH GRIP CONDUIT PLASTIC a See pages 444-445 EXTERNAL THREAD VERSION 70 For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support * www.peigenesis.com * sales@peigenesis.com 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 STEP 3: S E L E C T C A BL E CL A M P OR BOOT (IF APPLICABLE) TIP: Order connector, backshell and all accessories as one part number! See www.peigenesis.com/en/solution-guides.html RV No Clamp G Heat Shrink G2 U Spin Coupling Low-Cost Heat Shrink Shielded L Long Extender A T Unsealed MS Style (no grommet seal) (MS3108) 90 F Sealed (with grommet seal) STEP 4: S E L E C T C A BL E CL AM P OR BOOT A MS3057-A Standard Cable Clamp Heat Shrink Boot Call with cable outisde diameter a See pages 440-441. STEP 5: S E L E C T L AY O U T P Potting *Potting Compound a See Page 443 (IF APPLICABLE) C MS3057-C Gland Seal a See Page 112 9767 9767 Gland Seal for smaller cable range.a See Page 113 STEP 6: S EL ECT CONTACT P = Pin a See pages 72-82 STEP 7: S E L E C T R O TAT I ON S = Socket PS =Style TB Only STEP 8: S EL ECT CONTACT TYPE a See pages 83-93 (Omit for normal) S = Solder H = PC** W, X, Y, Z C = Crimp* 0 = Less Contacts * When using a "C" in part number, the connector is supplied with the standard size crimp contacts for its layout. Bolded part numbers on a page 94-96 indicate crimp contact. Please call for connectors with reduced or enlarged crimp barrel contacts. a ** See page 99 for post diameters and lengths. STEP 9: SEL ECT P L AT ING CONTACTS (Omit for silver contacts) B30 = Gold 30" Gold over Nickel T = Thermocouple (Solder only) RDS = RADSOK (Socket only) 12, 8, 4, 0 SHELL PLATING (Omit for olive drab chromate over cadmium) 023 = Nickel (RoHS with crimp or 116 contacts) 024 = Green Zinc Cobalt 025 = Black Zinc Alloy (RoHS with crimp or 116 contacts) onductive Black Zinc Alloy 027 = C (RoHS with crimp or 116 contacts) G96 = Black Anodized 116 = Less Pre-tinned Solder Cups 472 = 116 & 025 mod codes (RoHS) 548 = 116 & 023 mod codes (RoHS) 553 = 116 & 027 mod codes (RoHS) MATERIALS L = Low-smoke, zero-halogen V = High-temperature Viton(R)* *Viton(R) is a registered trademark of DuPont Dow Elastomers For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 71 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 LAYOUTS BY NUMBER OF CONTACTS CONTACT LEGEND =16 =12 Mating face view of pin inserts =8 =4 SERIES KEY: AIB (=GT) AIT (I=MS; v=non QPL) 97 (e=97) VG95234 () MS3450 (q=MS; s=non QPL) Thermocouple (2) =0 1 CONTACT LAYOUT # OF CONTACTS SERIES SERVICE RATING 8S-1 10S-2 12S-4 16-12 18-6 18-7 1-#16 Ieq A LAYOUT 1-#16 Iq A 12-5 1-#16 Iq D 14S-4 1-#12 Ieq D 14-3 1-#16 Ie D 18-16 18-420 # OF CONTACTS 1-#4 1-#4 1-#8 1-#12 SERIES Ieq I q I s Ies SERVICE RATING A D B C 16S-3 1#8 Iq A 16-2 1#16 sI B 20-2 1-#12 Is E 22-7 24-52 1-#12 1-#0 1-#0 e v q I q 17 KVac D E 24 KVdc 1-#12 v 21 KVac 30 KVdc 2 CONTACTS A A LAYOUT # OF CONTACTS SERIES SERVICE RATING B B 10SL-4* 2-#16 Ieq2 A B A 12S-3* 14S-9* 12S-6 2-#16 Ieq2 A 2-#16 e Thermocouple B A 2-#16 Ieq2 A B 16S-4 2-#16 Ies2 D 16A11 LAYOUT # OF CONTACTS SERIES SERVICE RATING 18-14 1-#16; 1-#4 Is A 16-11 2-#12 A B B B A B 16-13 2-#12 Ieq2 A 2-#12 I q2 Thermocouple A 18-3 2-#12 Ie D A A B A B A B A A A B 20-12 1-#16; 1-#4 I A 20-23 2-#8 Ie A 22-1 2-#8 eI D 22-8 22-11 2-#12 Ie E 2-#16 Ies B 24-1 1-#12; 1-#0 q D 3 CONTACTS A B A B A A C B LAYOUT # OF CONTACTS SERIES SERVICE RATING 24-9 2-#4 Ie A 28-7 2-#4 v D 32-5 2-#0 Ie D 10SL-3 3-#16 Ie q A 14S-1 3-#16 I eq A 14S-7 3-#16 Ieq2 A 14S-12 3-#16 ves A B 16S-5 3-#16 Ie A * most popular Pins in receptacle, sockets in plug only for 97/AIT/MS series 72 For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support * www.peigenesis.com * sales@peigenesis.com CONTACT LEGEND =16 =12 Mating face view of pin inserts =8 =4 =0 SERIES KEY: AIB (=GT) AIT (I=MS; v=non QPL) 97 (e=97) VG95234 () MS3450 (q=MS; s=non QPL) Thermocouple (2) =2/0 3 CONTACTS (CONT.) A C B C A B LAYOUT 16S-6 # OF CONTACTS SERIES SERVICE RATING C B 16-7 3-#16 Ie A 16-10 LAYOUT C B 20-51 B 20-59 3-#8 v A 22-2 C 20-6 3-#8 I eq A A C 22-21 3-#12 Ies E B 20-19 3-#16 Ie D B B 22-9 1-#16; 2-#8 Iq D C A C 22-6 3-#8 for #10 or #12 wire 3-#8 v Ieq A D B A A C C 3-#12 Ie D B B # OF CONTACTS SERIES SERVICE RATING A A C B 20-3 3-#16 Ieq D A A C B 18-22 1-#16; 2-#12 I eq D A A C A B 18-5 2-#16; 1-#8 3-#12 I e s I e q2 A A A C A A C 2-#16;1-#0 Iq A C B 22-80 B 28-3 3-#8 Ies E 3-#8 for #10 or 12 wire v A 4 CONTACTS 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 LAYOUTS BY NUMBER OF CONTACTS A A A C C B C B D B A C B LAYOUT # OF CONTACTS SERIES SERVICE RATING 28-6 3-#4 Ie D 28-72 A D B A B C D D A C B LAYOUT 16-9 2-#16; 2-#12 I e q2 A 4-#12 v A D LAYOUT 22B22 4-#8 A 18-10* 4-#12 Ieq A D A B C # OF CONTACTS SERIES SERVICE RATING B 22-4 2-#12; 2-#8 I eq A C B 22-10 4-#16 I e s2 E 4-#16 e I D A A C 4-#16 I eq D A D D 18-13 3-#12; 1-#8 Ieq A D A C B 22-22* 4-#8 Ieq A 18-15 4-#12 I e q2 Thermocouple 24-4 3-#16; 1-#0 s D B 14S-10 4-#16 I e q2 I A D 4-#16 v es I A A C B C B A C 14S-2* 12SL-844 3-#2/0 v D A C 18-4* 16-59 40-AV 3-#0 2 D(A); A(B,C) D C # OF CONTACTS SERIES SERVICE RATING 36-4 3-#4 (coax) RG-59A/U or RG-62A/U v (coax) D C D B B C B 20-4* 20-20 4-#12 I e q2 D 20-24 3-#12; 1-#4 I A D A C B 24-22* 4-#8 Ieq D 2-#16; 2-#8 I eq A D A C B 32-17 4-#4 I eq D * most popular For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 73 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 LAYOUTS BY NUMBER OF CONTACTS CONTACT LEGEND =16 =12 Mating face view of pin inserts =8 =4 SERIES KEY: AIB (=GT) AIT (I=MS; v=non QPL) 97 (e=97) VG95234 () MS3450 (q=MS; s=non QPL) Thermocouple (2) =0 4 CONTACTS (CONT.) A D D A C B B D 32-58 4 36-5 36-64 2 LAYOUT 40-57 # OF CONTACTS SERIES SERVICE RATING 40-66 4-#0 v E LAYOUT # OF CONTACTS SERIES SERVICE RATING C B 18-29 5-#16 Ie A 18-30 18-31 5-#16 ve A C 5-#16 Ie A B E 22-13 3-#16; 2-#8 Ie D B A E D C 22-12 3-#12; 2-#8 Ieq A B D C 22-34 1-#16; 4-#12 Ie D(E) A(A,B,C,D) 24-12 2-#16; 3-#12 Ie D 3-#12; 2-#4 Ieq A A A D C E E A D E B E A D LAYOUT A 24-17 C B B B 24-51 D C C 24-53 # OF CONTACTS 3-#16; 2-#12 5-#8 SERIES 2 v SERVICE RATING D A E B D B A E E A D B C 18-20 5-#12 I e q2 A A E C D 20-14 5-#16 ve A D B B C D A E A B E B 18-11* 5-#16 Ieq A A A D D 16S-8* 5-#16 Ieq I A A C B C C 14S-5* 4-#0 (coax) RG-115A/U v E/ (coax) E E B D A D A D 40-86 4-#0 (coax) RG-63B/U v (coax) 4-#0 (coax) RG-59/U; RG-62/U or RG-71/U v (coax) E E 3 3 36-65 4-#0 (coax) RG-11/U; RG-12/U or RG-13/U v (coax) E 3 C 5 CONTACTS 4 2 B C 1 4 D C 36-51 1 2 B B # OF CONTACTS 4-#4 (coax) RG-161/U 4-#0 2-#4; 2-#0 or RG-179/U SERIES v Ieq v SERVICE RATING (coax) A D 1 A D C LAYOUT A A 24-79 5-#8 v A C 32-1 2-#16; 1-#12; 2-#4 I2s D A D C 28-5 5-#8 v A C 32-2 3-#12; 2-#0 Iq E(A); D(All others) 2-#16; 3-#4 Is E 6 CONTACTS 1 5 D A 4 N 2 B C E E C C LAYOUT # OF CONTACTS SERIES SERVICE RATING 32-63 5-#4 q D G 3 B 32-79 1-#8; 4-#4 v D 40-5 5-#0 v A 40-75 4-#0; 1-#12 v E F A D C B E 14S-6* 6-#16 I e q2 I F D A B E F D B A C 18-12 6-#16 e I q2 A 20-8 4-#16; 2-#8 Ieq I * most popular 74 For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support * www.peigenesis.com * sales@peigenesis.com CONTACT LEGEND =16 =12 Mating face view of pin inserts =8 =4 SERIES KEY: AIB (=GT) AIT (I=MS; v=non QPL) 97 (e=97) VG95234 () MS3450 (q=MS; s=non QPL) Thermocouple (2) =0 6 CONTACTS (CONT.) C E E F D A F C B E A D B D F A E F C 20-17 B D 20-22 20-66 F B B E B C LAYOUT F E C 22-5 1 E D 22-15 2 3 B C C D A F A A A 4 D 5 6 22-24 28-22 28-82 # OF CONTACTS 1-#16; 5-#12 3-#16; 3-#8 1-#16; 5-#12 for #10 wire 4-#16; 2-#12 1-#16; 5-#12 4-#16; 2-#12 3-#16; 3-#4 4-#12; 2-#8 SERIES Ieq Iq v I e q2 I e s I Iq v SERVICE RATING A A A D A(A, B, C, E, F); E(D) D(C, D, E)A(A, B, F) D D 7 CONTACTS 1 A A F F E 6 B 2 5 B E 4 C 3 F A D LAYOUT 36-3 36-6 3-#12; 3-#0 40-74 4-#4; 2-#0 F A E G F B D E G D C D 20-57 22-26 F A A G F B B G E D A F C E C G 24-10 C D D D LAYOUT F E 24-16 24-27 D A B A 16S-1* 7-#16 5-#16; 2-#12 5-#16; 2-#12 v A I e q2 A I e q2 I ves I 18-9 F A D G E 24-2 C 24-60 F E B C D B G D 24-66 C D 24-3 7-#12 Ieq D A F B A G E C D F 22-33 A F B B E G 18-17 A G E B C G C G 14SA7 22-28 B F E B G C # OF CONTACTS 7-#12 7-#12 for #14 or 16 wire 5-#16; 2-#12 7-#12 7-#16 SERIES I e q2 v e I I SERVICE RATING A A 1/8" spacing D/A D(A, B, C, D); A(E, F, G) E C D A E B F E B D C C 20-15* LAYOUT F A G G D 7-#16 1-#12; 1-#4 (coax) RG-62/U; 4-#0 (coax) RG-9B/U or RG-214/U SERIES Iq Ieq v SERVICE RATING D A A / coax 100 A E B C E D # OF CONTACTS G F C 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 LAYOUTS BY NUMBER OF CONTACTS 5-#16; 2-#12 I D F A E B A G B D C 24-71 C 24-75 # OF CONTACTS 7-#8 3-#16; 3-#12; 1-#8 7-#16 7-#8 or 12 wire 7-#12 5-#8 for #10 or 12 wire, 2-#8 for #16 wire; 2-#8 5-#8 SERIES Ieq Ies Ies v v v v SERVICE RATING A D(A, B, F, G) E A D A A A(C, D, E) 6 A F F B F B F B 5 A E G E G D B B D LAYOUT F A 28-10 G C E G C E G 7 2 C C D C # OF CONTACTS 3-#12; 2-#8; 2-#4 SERIES Ieq SERVICE RATING D(G); A(All others) E 1 A A 32-10 3-#16; 2-#8; 2-#4 I E(A, F); B(G); D(B, E); A(C, D) 36-73 7-#4 (coax) RG-62B/U v (coax) D 36-77 7-#4 v D D 36-83 7-#4 (coax) RG-58/U v (coax) 4 3 40-87 7-#4 v D * most popular For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 75 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 LAYOUTS BY NUMBER OF CONTACTS CONTACT LEGEND =16 =12 Mating face view of pin inserts =8 =4 SERIES KEY: AIB (=GT) AIT (I=MS; v=non QPL) 97 (e=97) VG95234 () MS3450 (q=MS; s=non QPL) Thermocouple (2) =0 8 CONTACTS A G F G A H E F B 18-8* LAYOUT G D 20-7* # OF CONTACTS 7-#16; 1-#12 SERIES Ieq SERVICE RATING A F D H D F A H C B C D 22-23 8-#16 Ies D(A, B, F, G, H); A(C, D, E) A H E D 22-18 G F B E C D 7-#16; 1-#12 for #16 wire v DCH; A(all others) G B E 20-79 7-#16; 1-#12 Ivs DCH; A(all others) A F C E 20-9 8-#16 I e q2 A (B,C,F,G) I(all others) B H C E G A G B H F C E C D A B H 22-36 8-#12 I e q2 D(H); A(all others) 22-65 8-#12 8-#12 for #14 or 16 wire v D(H); A(all others) s D(H) A(all others) 9 CONTACTS A A B G F A B H C D H C LAYOUT 24-6 H F I B E LAYOUT # OF CONTACTS SERIES SERVICE RATING H F 20-18* G C E H A H B J F C G C D 8-#16; 1-#12 Ieq A 40-AD 22-16 H F D A G B J S C A C P G F LAYOUT # OF CONTACTS SERIES SERVICE RATING D E F D 22-17 28-1 6-#12; 3-#8 Ieq D(A, J, E); A(all others) G F 28-4 7-#16; 2-#12 Is E(G, P, S); D(all others) B B C I D A 28-84 9-#8 v A J 7-#16; 2-#12 I eq A A B B D C E F I H 24-11 8-#16; 1-#8 Ies D(J); A(all others) B 6-#12; 3-#8 Ieq A C E 1 8 F H 5 28AY 2 J J 32-3 5-#16; 4-#4 v A 9 7 6 G H F G D 22-27 9-#16 Ie A D C E C F 22-20 C G D A B E 8-#16; 1-#12 Is D(A); A(all others) A E D E H B H G B A H H A 20-16 9-#12 D(J), I(all others) A J E E 6-#16; 3-#12 Ie2 A 20A9 4-#8; 4-#0 v A B G J E D 20-21 6-#16; 3-#12 Ieq A 32-57 G I C 6-#12; 2-#0 (coax) RG-7/U v (coax) A F B I G C D 32-52 6-#12; 2-#0 v D A H A D G 6-#12; 2-#0 Iq D F E F 32-15 8-#12 Ies D(A, G, H); A(all others) G E G D # OF CONTACTS SERIES SERVICE RATING C D F E B E 3 4 32-75 4-#16; 2-#12; 2-#4; 1-#0 Is D 2-#12; 7-#8 (coax) RG-180B/U v (coax) 10 CONTACTS G H B I J F E LAYOUT A D 18-1* C D B A E F H D C G C J 18-19 J E K L F K # OF CONTACTS 10-#16 10-#16 SERIES I e q2 ves SERVICE RATING A (B, C, F, G) A I(all others) H 18-24 20-58 A H A B G J L B C K F D E 24-21 10-#16 5-#16; 5-#12 9-#16; 1-#8 v es v Ies A(B, C, F, G); A D I(balance) A B C M K J H E G 28-19 6-#16; 4-#12 Ies B(H, M); D(A, B) A(C,E,G,J,K,L) * most popular 76 For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support * www.peigenesis.com * sales@peigenesis.com CONTACT LEGEND =16 =12 Mating face view of pin inserts =8 =4 SERIES KEY: AIB (=GT) AIT (I=MS; v=non QPL) 97 (e=97) VG95234 () MS3450 (q=MS; s=non QPL) Thermocouple (2) =0 11 CONTACTS A A J I F LAYOUT H C K P C K C L N H L F 20-33 H E E K F 24-20 11-#16 Ieq A D F D G D A B A B E C J F D H E C J F E D J H M D E C Q B G L H # OF CONTACTS SERIES SERVICE RATING B M J A J A K B B 36-14 9-#16; 2-#12 I e q2 D L M K 40-67 6-#16; 5-#12; 5-#8 I D L M K 40-72 1-#16; 10-#4 (coax) RG-59/U v N A (coax) I L M 40-80 10-#4; 1-#16 v N AI 1-#16; 10-#4 (coax) RG-9B/U v N A (coax) I 12 CONTACTS H B C L A J LAYOUT H M C D K E F B L D M N K A N M J 22-63 L E 24-19 M F C L E 28-8 K B C J A L A K G B K F E J H J D F H A G C M D 28-9 F M G N C E 28-51 K E 20-11 # OF CONTACTS SERIES SERVICE RATING M 20-25 13-#16 Ie I 20-30 13-#16 ve I M D K I H L E C D 22-70 13-#16 ve I J F C N J H P N B L P F 14 CONTACTS A K H F H A D LAYOUT J L 5-#16; 8-#12 v A G A B J F 32-14* 24-58 7-#16; 3-#12; 3-#8 v A A K N L M B D K J L P H LAYOUT C D N G F N B M E 22-19* P M H K J R K L A F L P H J A J B M C B E D 24-59 C G N F 28-2 D E N H M G F P F A A 20-27* 13-#12 v D K 14-#16 I e q2 A D E 28-20 # OF CONTACTS 14-#16 7-#16; 7-#12 12-#16; 2-#12 4-#16; 10-#12 SERIES I e q2 v Ieq I e q2 SERVICE RATING A A D A A L C C L G B B K 8 C H E 9 B O D J 32-4 M N 12-#16; 2-#12 I A(F, J, K, N); D(all others) D H E F I L J M C E 10 A C D 12-#16 12-#12 Ies v C(M); D(G, H, J, K, L) A A(A, B); I(C,D,E,F) 13 CONTACTS B M E 28-18 # OF CONTACTS 8-#16; 4-#12 12-#16 10-#16; 2-#12 6-#16; 6-#12 SERIES v e Ies Ieq SERVICE RATING A A E(L,M,); D(B) A(balance) D L F E G B K N D J H A H B 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 LAYOUTS BY NUMBER OF CONTACTS G K N 32-9 12-#16; 2-#4 Iq D * different per 1651 STD: 5-#12; 2-#4 1 2 11 14 13 7 3 12 6 4 5 36-78 12-#8; 2-#16 v A * most popular For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 77 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 LAYOUTS BY NUMBER OF CONTACTS CONTACT LEGEND =16 =12 Mating face view of pin inserts =8 =4 SERIES KEY: AIB (=GT) AIT (I=MS; v=non QPL) 97 (e=97) VG95234 () MS3450 (q=MS; s=non QPL) Thermocouple (2) =0 15 CONTACTS A L K J M S R H N J H K E L R C F G A K L M O M P 40-5 10-#16; 5-#12 I A(C, D, E, F, G); D(all others) K E H K N H 16-#16 I e q2 A s A D E M D F C S B L E A T K 24-7* 24-5 6-#12; 4-#8; 2-#4; 3-#0 N G N C O R S B M P J R P A L I P 32-12 15-#16 Ieq B(R); D(M-P); A(A-L) G J L N B C D F 28-17* 24-65 F J N # OF CONTACTS 4-#16; 11-#12 SERIES v SERVICE RATING A B E D H M P D E C D A G B P F LAYOUT B A C 16 CONTACTS F H J 28-66 14-#16; 2-#12 I eq2 A 14-#12; 2-#8 v A A A L N M T P A B R D K J S H LAYOUT F L C M T 28-74 P A B R D K J E N S H F C M T L P A B R J C F H F E E H K L J M P M L M L K J LAYOUT B C N T P S R H G P D E R A N S T B E F J 20-29* F E H K L R Q L G R E F 32-82 36-14 12-#16; 4-#4 v A 6-#16; 5-#12; 5-#8 I D L S A J D Q H G F J C E 28-59 U R 36-13 20A48 C 19-#16 v A R S G H T E L 19-#12 v I 21 CONTACTS A N 1 4 8 6 5 9 2 3 7 10 11 12 J S 13 14 17 LAYOUT # OF CONTACTS 24-84 1-#12; 18-#12 (coax) RG-188/U or RG-174/U SERIES v SERVICE RATING A (coax) * most popular 78 15 18 19 16 H K A T L G M U V R B Q F C 3 1 4 6 7 8 11 12 13 5 2 3 4 9 10 6 7 8 14 15 11 12 13 D E P M 5 9 10 14 15 17 18 20 19 16 17 18 19 20 R L C X K V J 16 B W N P E T U H F G 28-16 36-79 20-#12 20-#12 for #10 wire 36-80 40-68 v A I e s2 A v A v A v A 20-#16 D S 32-76 19-#12, B A M 24-67 19-#16 I e q2 A 20 CONTACTS 2 90 C N U K D P V J D 22-14* 20-26 19-#16 I F E F B P V S G 15-#16; 2-#12 v E(N, P, Q); A(all others) A N T H D K # OF CONTACTS 17-#16 10-#16; 7-#12 SERIES I eq2 v SERVICE RATING A A M L K B H 1 D M P Q 12-#12; 4-#4 (coax) RG-58C/U v A (coax) N H M J C K N R K U C G N P 19 CONTACTS M A F P 17 CONTACTS D C 32-68 7-#8; 9-#16 v A B B I Q 28-79 9-#16; 7-#8 for #10 wire v A G N S A D C D K E 28-75 # OF CONTACTS 9-#16; 4-#8; 3-#8 for #10 wire SERIES v SERVICE RATING A N J B 21-#8 Special arrangement for MS3450 Series For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support * www.peigenesis.com * sales@peigenesis.com 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 LAYOUTS BY NUMBER OF CONTACTS CONTACT LEGEND =16 =12 Mating face view of pin inserts =8 =4 =0 SERIES KEY: AIB (=GT) AIT (I=MS; v=non QPL) 97 (e=97) VG95234 () MS3450 (q=MS; s=non QPL) Thermocouple (2) 22 CONTACTS J N U P V R W S D L A G B H C I J O I 28-11* LAYOUT F C K G H M L A N E P R S U V W T C I K P A B G H L M O D N M F L N R S T X 36-22 K W 40-7 W V X H Z T U LAYOUT 32-6 H P D Z E a Y E X N 32-13 32-16 23 CONTACTS (CONT.) K A B G H L M P D V L 32-62 40-2 16-#16; 2-#12; 1-#8; 2-#8 (coax) RG-124/U; 2-#4 v A (coax) 23-#16 s D 25 CONTACTS 13 12 11 E K F L R LAYOUT # OF CONTACTS SERIES SERVICE RATING 40-3 16-#16; 2-#12; 3-#8; 2-#4 D D s H N T X D J P E Q V U Y A K Z 24-28* 40-4 18-#16; 4-#12; 1-#4 G M S W C B G F L M R S W T C H N a Y Z Q 10 5 32-25 25-#12 v A 28 CONTACTS a N Z M 29 CONTACTS A K LAYOUT # OF CONTACTS SERIES SERVICE RATING S b B T H 12 E 26-#16 I eq2 A 10 28-13 26-#16 ves A 40-6 24-#16; 1-#12; 1-#0 s D 16 24 28 21 9 1 2 17 C E D H K G 26 20 8 24-96 28-#16 v I 4 P S Z 28A63 X W c Y 19-#16; 9-#12 A U T V 6 Q O R 5 19 7 L N M 3 25 18 22 27 11 F G 28-12* 23 13 D V 15 14 C U W X J J I d Y L A 6 7 B R 15 4 18 20 8 F P 3 16 17 9 V 25-#16 v A 26 CONTACTS 2 14 24 25 22 21 J P U X 19 D 1 23 24-AJ 24-#16 I e q2 I s Z S X 24 CONTACTS B V N R T W 15-#16; 8-#8 (coax) RG-124/U v A (coax) A Q U F J U C 32-60 16-#16; 2-#12; 3-#8; 2-#4 vs A I O B V M 16-#16; 2-#12; 18-#16; 5-#12 3-#8; 2-#4 Ieq Ieq A D K U W D F J T C E A S J P T 23-#16 vs I P, Q, U, V, W, X=A; D(balance) G # OF CONTACTS SERIES SERVICE RATING H N 24-80 s F C S V J U Y B R S 18-#16; 2-#12; 2-#0 R A P C D G M W X 36-1 J L R # OF CONTACTS 18-#16; 4-#12 18-#16, 4-#12 22-#12 SERIES I e q2 Ie v SERVICE RATING A D D E B F K D M T B E E F K X A 23 CONTACTS b a 40-10 16-#16; 9-#8; 4-#4 I A * most popular For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 79 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 LAYOUTS BY NUMBER OF CONTACTS CONTACT LEGEND =16 =12 Mating face view of pin inserts =8 =4 SERIES KEY: AIB (=GT) AIT (I=MS; v=non QPL) 97 (e=97) VG95234 () MS3450 (q=MS; s=non QPL) Thermocouple (2) =0 30 CONTACTS 31 CONTACTS A M T Y c U Z d e LAYOUT F d C e U P W F K V Y W Z a c 1 16 L S X 18 26 25 13 12 A H P J R X E K S M T Y V b a Z h c j f k A B C D E F G J K L H M W P g R X f l LAYOUT g P M f c K q a h X H W F A a Y V k i h k q r p s B v R c C H I E K S E B G F M L T U h g n N J P W k r Z f L G 38 f 28-21* 11 4 30 29 28 LAYOUT U T S 32-53 71 E 80 40-AT 18-#16; 24-#12; 1-#8 v A 24 22 23 7 8 40-35 35-#12 v D p g h R P D N M L f F W H V 58 67 76 84 55 63 72 81 86 48 53 59 68 77 51 56 64 73 91 90 49 54 60 69 78 65 74 82 87 70 79 85 66 75 83 43-#16; 1-#8 (coax); RG-187B/U v A (coax) R E g F P N M L H f J K 36-55 31-#16; 8-#8 for #6 wire v A 46 CONTACTS 17 16 15 14 32 13 1 45 43 11 39 40 41 30 12 38 46 42 29 3 23 37 44 31 2 22 36 35 34 33 21 20 19 61 p h S D n q i C d t T 18 89 36-74 j B c m r K 52 57 A s k U J b a Y X E n 44 CONTACTS V 32-59 5 21 9 31-#16; 8-#8 v A 62 40-#16; 2-#8 (coax) RG-161/U v A (coax) 4 20 31 6 10 36-54 38-#12 v A 43 CONTACTS 25 Z C d t q i 27 40-AG 37-#16 I e q2 A w 37-#16; 5-#12 v I/E j m s r V B c k W 26 13 14 A Y X 24 b a Z 25 12 15 31 s 3 1 5 22 23 16 32 m 10 2 6 33 32 39 CONTACTS 21 9 7 17 3 19 30 35 11 F G H J 26 12 E 33 35-#16 for #12 wire v A/D 88 # OF CONTACTS SERIES SERVICE RATING Y Z 27 2 18 29 20 8 18 W X 13 D 1 17 34 36-85 35-#16 I e q2 D(M); A(balance) 19 V g K H J 16 28 14 C f h a B U m j M 36-15 U D k b F 50 g 36-18 14-#16; 14-#12; 2-#8; 1-#4 vs A 15 A e 38 CONTACTS R Z X Y K 34 X e d j p D W g T d n u H V c b a C N E T d c P D f h a L 32-7* A b M D V m Q C e S R B U S m C t 36-9 14-#16; 14-#12; 2-#8; 1-#4 Ieq A A j N 28-#16; 7-#12 Ieq I(A, B, H, J); A(all others) D W Z Y P j N B 35 H b 6 7 T k O C F N M Z U V 42 CONTACTS L a G 37 40-64 K M b k # OF CONTACTS 20-#16; 3-#12; 13-#8 (coax) RG-124/U SERIES v SERVICE RATING (coax) J 8 S c P A 36 U X J LAYOUT T F 37 CONTACTS T j m b Z E B i n d L g 35-#16 I e q2 A S p 22 d Q A R h g L m 36 CONTACTS N S f k 28-15* 36-20 30-#16; 2-#12; 2-#8 v A K Y e j W c b a e N V U T Z Y d m S j # OF CONTACTS SERIES SERVICE RATING 21 9 R J R X d h P W c N U 29 35 CONTACTS G L e d F 20 31-#16 v A B D 5 28 32-31 24-#16; 6-#12 Iq D 34 CONTACTS C 10 4 19 31 30 23 40-1 24-#16; 6-#12 for #10 wire v A 27 24 11 e 3 17 14 b d 2 15 R P U 32-56 24-#16; 6-#12 I e2 A G J O T C C F I N G L S M B K R b A E J E H D I O V a H N X 32-8 # OF CONTACTS SERIES SERVICE RATING Y Z G L S X c B K R b A E J P W T D I O V a H N B D M 24 26 27 28 10 4 5 25 6 7 8 9 32-73 46-#16 vq A * most popular 80 For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support * www.peigenesis.com * sales@peigenesis.com CONTACT LEGEND =16 =12 Mating face view of pin inserts =8 =4 SERIES KEY: AIB (=GT) AIT (I=MS; v=non QPL) 97 (e=97) VG95234 () MS3450 (q=MS; s=non QPL) Thermocouple (2) =0 47 CONTACTS A C O Y V Z d j h n f r W c g k I S b f m p v m s w x N T X b t u N S W a e J M R 36-7* LAYOUT # OF CONTACTS SERIES SERVICE RATING G O X D M T Y c s K U d p u v w L R V Z a n r t f u 36-16 36-17 40-#16; 7-#12 vs A m p v s y z 46-#16; 1-#12 I eq2 A c g k w x T X b t r 36-8 40-#16; 7-#12 I eq2 A d j h N S W a e J M R V Z E G I L P U Y e j h K O B D F H y z A C H P k n C E F J g x y z A B E G I L P U B D F H K 36-60 40-#16; 7-#12 vs A 40-#16; 7-#12 for #10 wire v A 48 CONTACTS C 1 4 6 13 22 31 9 18 27 36 10 14 23 32 40 19 28 37 43 G 5 7 8 11 15 16 20 24 25 29 33 34 38 41 42 44 45 46 LAYOUT 2 3 M 12 U 17 21 26 30 b O V W c d j 47 B F D E I J K P Q R X e f l m p q t u k r 36-76 # OF CONTACTS SERIES SERVICE RATING N 35 39 A H A L C S Y Z g h V i F R e g w v y V P s Y f e m x L R X g u q 36-10* 32-48 48-#16 v I r w v N T a h y 24-#16; 22-#12; 1-#8 I q A G M S Z p n t z F E K Q W d B D J O c k r C H U b j q u t s a h p 100 N T Z f n M S Y A G L Q X m 40-9 47-#16 v A E K P W d o n J O a B D H T U b c k j s x z 36-11 48-#16 I e q2 A 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 LAYOUTS BY NUMBER OF CONTACTS 48-#16 I es A 52 CONTACTS A C H O V E J P W d B D K Q X e m R f LAYOUT S p u a h 29 j w 28 U 27 c b r q v 31 N T Z g y # OF CONTACTS SERIES SERVICE RATING M 1 110 G L Y n t F 30 24 s 22 x 36 46 21 19 9 39 8 10 43 13 15 18 12 M u 14 L t 16 W K s 17 V J 36-75 48-#16 I es A j k F n p q h E G H r J D T a U b g C S Z z 36-12 B c X D f R Y N v 11 A B e A Q P O w d z y x 7 38 44 20 5 6 40 42 45 4 37 35 41 23 3 34 48 47 25 k 33 26 2 32 m e n v H G 2 t u y z 5 L T R Y f Z j x 4 a k f n u S g v AB Z Y p AA z y w R X d m K J P W t s h q i r x w AC AH AD 32-414 48-#16 v A N V c b p H M 3 C D F U j rg h r s T K S a b L E M k l m F U c d E A N V W 6 36-AF 48-#16 for #14 wire v A f B P Q X C AE AF 36-52 52-#16 e A 52-#16 I q2 A 53 CONTACTS 2 1 3 6 8 14 13 20 19 22 21 23 24 36-403 52-#16 e A M N V W X d m u f n v P g S T U Z a b h q i r x y AE AC AD A B K J R Y p w C D H F L c + 17 16 18 LAYOUT C 10 12 15 E 7 9 11 # OF CONTACTS SERIES SERVICE RATING A B A 4 5 z j s AA E L k t AB AH AF AJ 36-59 50-#16; 3-#12 for #10 wire v A M V c d n v P g w S T Z a h q p i r x y AE AC AD K J R Y X f m u N W C D H F z U b j s AA k t AB AH AF AJ 36-71 50-#16; 3-#12 v A * most popular For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 81 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 LAYOUTS BY NUMBER OF CONTACTS CONTACT LEGEND =20 =16 Mating face view of pin inserts =12 =8 =4 SERIES KEY: AIB (=GT) AIT (I=MS; v=non QPL) 97 (e=97) VG95234 () MS3450 (q=MS; s=non QPL) Thermocouple (2) =0 54 CONTACTS 55 CONTACTS 56 CONTACTS 59 CONTACTS 1 3 C F g m s AB j p t z LAYOUT r m AC c g n w AD 32-22 # OF CONTACTS SERIES SERVICE RATING O T X s G K N AB AE AG AF b v y AA AD S f k q u x W a e A C F R V Z d h n w J M P U Y c E H L O T X b B D G K N S A Y h t z B D E H L U j v y AA AF k q u W a e b r m AC T X c g O B D L 16 E j AA AH AF 38 17 37 15 58 35 14 LAYOUT 28 30 47 32 6 19 7 18 17 9 10 11 12 20 8 31 33 34 13 5 29 48 49 21 46 57 50 36 16 27 56 59 4 45 55 51 3 44 60 52 18 2 26 43 54 53 39 19 1 25 42 41 40 20 24 23 22 40-53 # OF CONTACTS SERIES SERVICE RATING 22 40 39 38 37 16 23 41 53 52 51 36 15 24 42 54 60 59 50 35 14 1 2 3 26 43 27 44 55 45 56 46 57 58 47 48 49 32 33 34 11 12 13 8 31 36-66 38 17 37 45 52 38 46 15 23 31 39 47 48 54 53 24 32 40 41 49 55 56 59 40-61 A 15 1 2 26 43 54 51 14 57 59 58 50 49 35 12 29 11 32 15 40-85 60-#16 Is A 32A69 60-#16 for #14 wire v A 49 35 14 33 34 13 11 12 6 30 47 48 5 29 46 57 58 4 28 45 56 61 50 36 16 9 10 60 3 27 44 55 59 51 37 17 53 2 26 43 54 52 38 18 7 8 31 39 19 6 30 47 40 25 42 41 20 5 46 48 33 34 13 4 28 45 56 60 21 1 24 23 22 3 27 44 55 36 16 40-62 60-#16 v2 A 44 37 14 30 55-#16; 3-#12; 1-8 v A s 25 42 53 52 18 9 10 39 19 7 30 40 20 6 29 36 29 22 58 52-#16; 4-#12 24 23 41 21 5 28 28 13 21 61 CONTACTS 22 4 43 51 20 AC 55-#16 v A 25 27 7 12 AE AG 60 CONTACTS 21 19 35 6 11 57 32-AF 54-#16 v I 34 50 r v y 26 42 f k q u x W a e 18 2 5 10 17 33 4 9 25 R V Z p J M P d z AD H U Y t w 32-64 54-#16 vs A G h n s AB AE AG K N S f A C F R V Z p J M P d x 8 31 32 7 8 9 10 40-63 41-#20; 20-#16 I 61-#16 for #14 wire v A 62 CONTACTS 3 6 11 19 28 36 7 12 20 13 21 29 37 45 14 30 53 15 31 54 16 32 55 59 17 25 33 41 49 56 60 18 26 34 42 50 19 27 35 43 51 18 44 40 39 57 36 15 61 54 60 59 51 37 16 42 53 52 38 17 52 40-70 # OF CONTACTS SERIES SERVICE RATING 41 20 10 24 40 48 58 9 23 39 47 21 5 8 22 38 46 LAYOUT 4 25 2 26 43 44 55 61 58 35 12 11 40-73 61-#16 v A 61-#16 v A 6 30 31 32 10 12 5 29 47 33 34 13 28 46 48 49 5 4 45 56 1 3 27 57 50 14 1 24 23 22 1 2 7 8 9 20 6 13 21 29 37 14 22 30 38 46 2 7 15 23 31 39 47 40 59 16 41 17 42 43 61 40-81 28 20 45 37 53 58 62 62-#16 for #14 wire v A 6 13 21 29 36 44 52 12 19 27 35 51 57 5 11 18 26 34 50 56 60 10 25 33 49 55 1 4 9 24 32 48 54 3 8 46 22 30 38 2 7 14 23 31 39 47 32 48 33 49 34 50 51 19 27 35 43 57 61 11 18 26 42 56 60 10 17 25 41 55 59 4 9 16 24 40 54 3 8 15 28 36 44 52 45 53 58 62 40-82 62-#16 v A 85 CONTACTS A E P X j t AC AD AP AR AZ AS BA BJ AT BB BK BL BS LAYOUT # OF CONTACTS SERIES SERVICE RATING BD AL AW BE BN BU r AA AK BM BT z AV AU BC g q y AJ W f p x AH M V d n w AF L U c b m v AE K T a k u D J S Z i C H R Y h B F N BP AM AX BF s AB AN AY BH BR BV 40-56 85-#16 Iq2 A * most popular 82 For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support * www.peigenesis.com * sales@peigenesis.com MATING-FACE VIEW OF PIN INSERTS ALTERNATE INSERT POSITION (ROTATION) SERIES KEY: 97 (e=97) AIT (I=MS; v=non QPL) AIB (=GT) VG95234 () MS3450 (q=MS; s=non QPL) Thermocouple (2) e T 8S-1 AI LAYOUT 97 Se rie s Se r i e AI B/ s G T VG 95 23 M S3 4 45 0 TO TA L CONTACT METALLURGY KEY: Alumel (Al.) Chromel (Ch.) Constantan (Con.) Copper (Cu) Iron (Ir.) DEGREES OF ROTATION CONTACTS SIZES 20 16 12 8 4 0 2 W X Y Z SERVICE RATING Iq 1 1 - - - - A 10S-2 I^ q 1 1 - - - - A 10SL-3 e I q 3 3 - - - - A 10SL-4 e I^ q 2 263# - - - A 10SL-51 v s 2 2 2 10SL-4 45 A=Ir.; B=Con. 10SL-52 v s 2 2 2 10SL-4 45 A=Cu; B=Con. 10SL-53 v s 2 2 2 10SL-4 45 A=Al.; B=Ch. 10SL-54 v s 3 3 2 10SL-3 A=Ir.; B=Con.; C=Cu 10SL-55 v s 3 3 2 10SL-3 A=Al.; B=Ch.; C=Cu 10SL-56 v s 2 2 2 10SL-4 A=Al.; B=Ch. 10SL-57 v s 2 2 2 10SL-4 A=Ch.; B=Con. 10SL-58 v s 3 3 2 10SL-3 A=Ch.; B=Al.; C=Cu 10SL-59 v s 2 2 2 10SL-4 A=Ch.; B=Al. 10SL-60 v s 2 2 2 10SL-4 A=Ir.; B=Con. 10SL-61 v s 2 2 2 10SL-4 A=Cu; B=Con. 10SL-62 v s 3 3 2 10SL-3 A=Cu; B=Al.; C=Ir. 10SL-63 v s 3 3 2 10SL-3 A, C=Con.; B=Ch. 10SL-64 v s 3 3 2 10SL-3 A, C=Ch.; B=Al. 12S-1 vs 2 2 12S-3 100 A 12S-2 e vs 2 2 12S-3 250 A 12S-3 e Iq 2 270 145 Iq 1 1 - - 12S-4 12S-6 e 222 12S-3 A=Con.; B=Ir. 215 290 A - - D 12S-51 vs 2 2 2 12S-3 315 A=Ch.; B=Al. 12S-54 vs 2 2 2 12S-3 315 A = Ir.; B=Con. 12S-55 vs 2 2 2 12S-3 45 A=Cu; B=Con. 12S-56 vs 2 2 2 12S-3 A=Al.; B=Ch. 12S-57 vs 2 2 2 12S-3 60 A=Ch.; B=Al. 12S-58 vs 2 2 2 12S-3 120 A=Ir.; B=Con. 12S-59 vs 2 2 2 12S-3 A=Ir.; B=Con. 12S-60 vs 2 2 2 12S-3 A=Cu; B=Con. 12S-61 vs 2 2 2 12S-3 A=Ch.; B=Con. 12S-62 v s 2 2 2 12S-3 A=Ch.; B=Al. 12SL844 e 4 4 - 1 1 - - - - I - - D - - A 240 - I 12-5 e Iq 14S-1 e I q 3 3 - - 14S-2 e I q 4 4 -120 14S-4 e I^ 1 1 - - - D 14S-5 e I q 5 5 -110 - I Pins in receptacle, sockets in plug only ^ 5015 QPL not all configurations - #Rotation commercial only, not MS-approved 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 LAYOUTS BY SHELL SIZE NOTE: 16S contacts are used in shell sizes 8S, 10S, 10SL, 12S, 14S, & 16S For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 83 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 LAYOUTS BY SHELL SIZE SERIES KEY: 97 (e=97) AIT (I=MS; v=non QPL) AIB (=GT) VG95234 () MS3450 (q=MS; s=non QPL) Thermocouple (2) DEGREES OF ROTATION CONTACTS SIZES 97 16 12 8 4 0 W X e I q 6 690# - - - I 14S-7 e I q 3 390 180 270 - A 14S-9 e I q 2 2 215 290 A 14S-10 e v s 4 4 14S-2 100 14S-11 e v s 4 4 14S-2 250 I 14S-12 e v s 3 3 14S-1 100 A 14S-13 e v s 3 3 14S-1 260 A 14S-14 4 I 70 145 Y Z SERVICE RATING 14S-6 20 2 LAYOUT AI Se rie s T Se r i e AI B/ s G T VG 95 23 M S3 4 45 0 TO TA L CONTACT METALLURGY KEY: Alumel (Al.) Chromel (Ch.) Constantan (Con.) Copper (Cu) Iron (Ir.) e v 4 14S-2 100 14S-51 v s 2 2 14S-9 90 A=Al.; B=Ch. 14S-52 v s 4 14S-2 45 A, B=Cu; C=Al.; D=Ch. 14S-53 v s 2 14S-9 90 A=Ir.; B=Con. 14S-54 v s 6 14S-6 45 A, C, E=Ir.; B, D, F=Con. 14S-55 v s 4 14S-2 45 A, C=Ir.; B, D=Con. 14S-56 v s 4 14S-2 45 A=Ir.; B=Con.; C, D=Cu 14S-57 v s 4 14S-2 45 A, C=Al.; B, D=Ch. 14S-58 v s 3 14S-7 45 A=Al.; B=Ch.; C=Cu 14S-59 v s 2 14S-9 90 A=Cu; B=Con. 14S-60 v s 2 14S-61 v s 6 14S-63 v s 6 14S-64 v s 4 14S-65 v s 6 14S-67 v s 6 14S-68 v s 4 14S-69 v s 3 14S-70 v s 4 14S-71 v s 4 14S-72 v s 2 14S-73 v s 4 14S-74 v s 4 14S-75 v s 4 14S-76 v s 4 14S-77 v s 4 14S-78 v s 2 2 4 2 2 2 6 2 4 2 4 2 4 2 3 2 2 2 2 2 6 2 6 2 4 2 6 2 6 2 4 2 3 2 4 2 4 2 2 2 4 2 4 2 4 2 4 2 4 2 2 2 14SA7 v 7 7 - - 14-3 Iq 14S-9 A=Al.; B=Ch. 14S-6 45 A=Al.; B=Ch.; C=Ir.; D=Con.; E, F=Cu 14S-6 A, C= Al.; B, D=Ch.; E=Ir.; F=Con. 14S-2 A, C=Con.; B, D=Cu 14S-6 A, C, E= Cu; B, D, F=Con. 14S-6 A=Al.; B=Ch.; Balance=Cu 14S-2 45 A=Ch.; B=Con.; C, D=Cu 14S-7 A=Con.; B=Ch.; C=Cu 14S-2 A, D=Ch.; B, C=Al. 14S-2 A, B, D=Cu; C=Con. 14S-9 A=Con.; B=Cu 14S-2 A, B=Cu; C=Al.; D=Ch. 14S-2 A, B=Ch.; C, D=Al. 14S-2 A, B=Cu; C, D=Con. 14S-2 A, C=Al.; B, D=Ch. 14S-2 A, D=Al.; B, C=Ch. 14S-9 A=Ch.; B=Al. - - A 1 - - - - A q 7 780 - - 280 A 16S-3 Is 1 1 - - - - B 16S-4 e I s 2 235 110 250 325 D 16S-5 e I 3 370 145 215 290 A 16S-6 e I 3 390 180 270 - A 16S-8 e I q 5 5- 170 265 - A 16S-14 e v 3 316S-5 110 A 16S-15 e v 2 216S-4 100 D 16S-16 e v 2 2 16S-4 250 D 16S-17 e v 3 3 16S-5 250 A 16S-52 v s 2 2 16S-54 v s 7 7 16S-1 e I 1 I 2 2 16S-4 A=Ch.; B= Al. 16S-1 A=Al.; B=C; Balance=Cu NOTE: 16S contacts are used in shell sizes 8S, 10S, 10SL, 12S, 14S, & 16S. #Rotation commercial only. Not MS-approved. Not used for 97 series. 84 For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support * www.peigenesis.com * sales@peigenesis.com SERIES KEY: 97 (e=97) AIT (I=MS; v=non QPL) AIB (=GT) VG95234 () MS3450 (q=MS; s=non QPL) Thermocouple (2) DEGREES OF ROTATION CONTACTS SIZES T AI 97 LAYOUT Se rie s Se AI ries B/ G T VG 95 23 M S3 4 45 0 TO TA L CONTACT METALLURGY KEY: Alumel (Al.) Chromel (Ch.) Constantan (Con.) Copper (Cu) Iron (Ir.) 16S-55v 20 s 16A11 16 12 8 4 0 2 7 7 2 2 W X 16S-1 235 Y Z SERVICE RATING A=Con.; Balance=Cu 110 250 125 A 16SA18 e v 7 7 16S-1 100A 16SA19 e v 7 7 16S-1 260A 16SA20 e v 7 7 16S-1 110A 16SA21 e v 7 7 16S-1 250A 16-2 I s 1 16-7 e I s 3 2 16-9 e I q 4 16-10 e I 16-11 e 16-12 e 16-13 e 1 -- - -E 1 80110 250 280 A 2 2 35110 250 325 A q 3 3 90180 270 - A I q 2 2 35110 250 325 A I I q 2 2 2 35110 16-52 v s 2 2 2 16-11 90 A=Al.; B=Ch. 16-53 v s 4 2 16-9 70 A=Al.; C=Ch.; B, D=Cu 16-55 v s 3 3 2 16-10 45 A=Al.; B=Ch.; C=Cu 16-56 v s 2 2 2 16-13 90 A=Con.; B=Cu 16-57 v s 3 3 2 16-10 A=Al.; B=Cu; C=Ch. 16-58 v s 3 3 2 16-10 A=Con.; B, C=Cu 16-59 v 4 16-60 v s 2 2 2 16-13 A=Al.; B=Ch. 16-62 v s 2 2 2 16-11 A=Con.; B=Cu 18A31 e v 10 10 18-1 18-1 e I q 10 10 70145 18-3 e I 2 18-4 e I q 4 I q 3 1 18-6 I q 1 18-7 I ^ s 1 1 -- 18-8 e I q 8 7 1 70- q 7 18-5 e q 1 1 --- 2 2 - 250 4 80- - 325 280 110 A A = Ir.; B = Con. A A (B,C,F,G) I (all others) 215 290 2 35110 250 325 D 4 35110 250 325 D 250 280 - - D - - B - 290 A 2 80110 1 -- A (B,C,F,G) I (all others) D 18-9 e I 5 2 80110 250 280 I 18-10 e I q 4 4 -120 240 - A 18-11 e I q 5 5 -170 265 - A 18-12 e I q - 280 A 18-13 e I 250 280 A 250 280 240 - - - C I q 18-14 I ^ s 18-15 e I 18-16 e 18-17 18-18 6 680- 4 2 3 1 80110 1 1 80110 A q 4 4 I^ s 1 1 -- e v s 7 5 2 18-9 100 e v s 7 5 2 18-9 250 18-19 e v s 10 10 80120 240 - A 18-20 e I^ 5 5 90180 270 - A 18-22 e I^ q 3 3 70145 215 290 18-23 e v s 10 10 18-1 100 A(B,C,F,G) I (all others) 10 A (B,C,F,G) I (all others) 2 -120 A, C=Ir. B, D=Con. I D 18-24 e v s 10 18-1 250 18-25 e v 2 2 18-3 100D 18-26 e v 2 2 18-3 250D Socket only for 97 Series ^ 5015 QPL not all configurations Socket only for MS3450 series NOTE: 16S contacts are used in shell sizes 8S, 10S, 10SL, 12S, 14S, & 16S 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 LAYOUTS BY SHELL SIZE Pin only for MS3450 For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 85 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 LAYOUTS BY SHELL SIZE SERIES KEY: 97 (e=97) AIT (I=MS; v=non QPL) AIB (=GT) VG95234 () MS3450 (q=MS; s=non QPL) Thermocouple (2) AI 18-27 e v s 18-28 e v s 18-29 e I^ 18-30 e 18-31 e 18-420 e DEGREES OF ROTATION CONTACTS SIZES 3 1 2 18-5 100 3 1 2 18-5 250 D 5 5 90 180 - A v 5 5 18-20 110 A v 5 5 18-20 260 A v s 18-52 v s 18-53 v s 18-54 v s 18-56 v s 18-57 v s 18-59 v s 18-60 v s 18-61 v s 18-62 v s 18-63 v s 18-65 v s 18-66 v s 18-67 v s 18-68 v s 18-69 v s 18-70 v s 18-71 v s 18-72 v s 18-73 v s 18-74 v s 20A9 1 HV 4 0 W X 1 HV 6 6 Y 270 Z D 24 KVdc, 17 KVac 2 5 5 2 6 6 2 4 4 2 10 10 2 6 6 2 6 6 2 5 5 2 6 6 2 6 6 2 4 4 2 6 6 2 10 10 2 6 6 2 5 5 2 10 10 2 5 5 2 4 4 2 4 4 2 7 5 2 2 6 6 2 18-12 A=Ir.; B, E=Con.; D=Cu; C, F=Dummy 20-11 182 I 20-4 250 D 18-11 A=Ir.; B=Con.; C=Ch.; D=Al.; E=Dummy 18-12 A, D=Ir.; B, E=Con.; C, F=Dummy 18-15 A, C=Al.; B, D=Ch. 18-1 45 A, C, E, G, I=Ir.; B, D, F, H, J=Con. 18-12 45 A, C, E=Al.; B, D, F=Ch. 18-12 45 A, C=Ir.; B, E, F=Con.; D=Cu 18-11 45 A, D=Al.; B, C,=Ch.; E=Cu 18-12 A, C=Ir.; B, D=Con.; E=Ch.; F=Al. 18-12 A, B, C=Ir.; D, E, F=Con. 18-15 A, C=Con.; B, D=Cu 18-12 A=Ir.; B=Con.; Balance=Cu 18-1 A, C, E, G, I=Cu; B, D, F, H, J=Con. 18-12 A, C, E=Cu; B, D, F=Con. 18-11 A, D=Al.; B, C=Ch.; E=Cu 18-1 A=Al.; B=Ch.; Balance=Cu 18-11 A=Ir.; B=Con.; C=Ch.; D=Al.; E=Cu 18-15 A=Con.; Balance=Cu 18-15 D=Con.; Balance=Cu 18-9 A=Al.; D=Ch.; Balance=Cu 18-12 A=Ch.; B=Al.; D=Ir.; E=Cu; C, F=Con. 9 9-110 20A16 e v 13 20A37 e v 4 20A48 8 SERVICE RATING 12 18-51 20 2 16 T LAYOUT 97 Se rie s Se r i e AI B/ s G T VG 95 23 M S3 4 45 0 TO TA L CONTACT METALLURGY KEY: Alumel (Al.) Chromel (Ch.) Constantan (Con.) Copper (Cu) Iron (Ir.) 19 13 4 1980 280 D(J), I(all others) - I D - - 20-3 e I^ 3 370 145 215 290 D 20-4 e I q 4 445 110 250 - D 20-6 e I^ 3 370 145 215 290 D A(B,C.F,G) I(all others) q 1- - - - 20-2 v 1 250 20-7 e I q 8 880 110 250 280 20-8 e I q 6 4 280 110 250 280 I 20-9 Is 8 7 180 110 250 280 D(H), A (all others) 20-11 13 13- - - - I 20-12 I^ 2 1 20-14 e I q 5 3 20-15 e I q 7 780 - 20-16 e I q 9 7 280 110 20-17 e I^ q 6 1 590 180 270 - A 20-18 e I q 9 6 335 110 250 325 A 20-19 e I e I 180 110 250 280 A 280 110 250 280 A - 280 A 250 280 A q 3 270 - A 20-20 I^ 4 3 180 110 250 280 A 20-21 9 135 110 250 325 A e I q Socket only for MS3450 series 8 390 180 ^ 5015 QPL not all configurations NOTE: 16S contacts are used in shell sizes 8S, 10S, 10SL, 12S, 14S, & 16S 86 For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support * www.peigenesis.com * sales@peigenesis.com SERIES KEY: 97 (e=97) AIT (I=MS; v=non QPL) AIB (=GT) VG95234 () MS3450 (q=MS; s=non QPL) Thermocouple (2) 97 AI LAYOUT Se rie s T Se r AI ies B/ G T VG 95 23 M S3 4 45 0 TO TA L CONTACT METALLURGY KEY: Alumel (Al.) Chromel (Ch.) Constantan (Con.) Copper (Cu) Iron (Ir.) DEGREES OF ROTATION CONTACTS SIZES 20 16 12 8 4 2 0 W X Y Z SERVICE RATING 20-22 I q 6 3 380 110 250 280 A 20-23 e I 2 235 110 250 325 A 20-24 e I q 4 2 235 110 250 325 A 20-25 e v 13 13 20-26 v 19 19 - 90 280 - A 20-27 e I q 14 1435 110 250 325 A 20-29 e I q 17 1780 - - 280 A 20-30 e v 13 13 20-11 250 I 20-32 e v s 8 8 20-7 260 A(B,C,F,G) I(all others) 20-33 e I 11 11 - - 20-51 v 3 20-52 v s 4 4 20-4 315 A=Ir.; B=Con.; C=Ch.; D=Al. 20-56 v s 8 20-7 45 A, B, G, H=Ir.; C, D, E, F=Con. 20-57 v 77 - - 20-58 v 5 - - - - A 20-59 v 33 - - - - A 20-60 v s 20-61 v s 20-62 v s 20-64 v s 20-65 v s 20-66 v 6 1 20-67 v s 9 20-68 v s 8 8 20-69 v s 14 14 20-70 v s 17 17 20-71 v s 17 17 20-74 v s 17 17 20-75 v s 7 7 20-77 v s 9 2 20-79 v 8 7 20-80 v s 14 14 20-81 v s 14 14 20-82 v s 17 17 22B22 q 10 100 3 - - 2 8 2 5 20-11 - 280# A - - A - - 8 8 20-7 45 D=Ch.; E=Al.; Balance=Cu 17 17 20-29 45 A, B, M=Cu; Balance=Con. 20-15 80 A, C, E=Al.; B, D, F=Ch.; G=Cu 2 2 7 7 2 14 14 2 14 14 2 7 7 2 2 2 2 2 2 2 2 A=Al.; C=Ch.; Balance=Cu 20-27 A, B, C, D, E, F, G=Ir.; H, I, J, K, L, M, N=Con. - - A 20-16 H=Al.; I=Ch.; Balance=Cu 20-7 A, B, G, H=Con.; C, D, E, F=Cu 20-27 A, B, C, D, E, F, G=Cu; H, I, J, K, L, M, N=Con. 20-29 A, C, E, G, J, L, N, R, T=Ir.; B, D, F, H, K, M, P, S=Con. 20-29 S=Al.; R=Ch.; Balance=Cu 20-29 A, C, E, G, J, L, N, R=Ir.; B, D, F, H, K, M, P, S=Con.;T=Cu 20-15 G=Al.; Balance=Ch. 20-16 A=Con.; Balance=Cu 1 - - 2 2 2 A 20-27 5 - 2 I - - D(H); A (all others) 20-27 A, C, E, G, I, K, M=Cu; B, D, F, H, J, L, N=Con. 20-27 A, C, E, G, I, K, M=Ch.; B, D, F, H, J, L, N=Al. 20-29 A, C, E, G, J, L, N, R=Al.; B, D, F, H, K, M, P, S=Ch.; T=Cu 4 4 -110 250 - A 22-1 e I 2 235 110 250 325 D 22-2 e I q 3 370 145 215 290 D 22-4 e I q 4 2 235 110 250 325 A I q 6 4 235 110 22-6 I q 3 1 22-7 I q 1 22-8 e I^ 2 2 35 110 3 22-5 e 280 110 1 - - 250 325 D 250 280 D - - E 250 325 E 22-9 e I s 3 70 145 215 290 E 22-10 e I s 4 4 35 110 250 325 E 22-11 e I s 2 235 110 250 325 B 22-12 e I^ 5 3 280 110 250 280 D 22-13 e I^ 5 1 435 110 250 325 A(A-D) D(E) #Rotation commercial only, not MS-approved Reduced contact crimp pot Socket only for MS3450 series ***Pin only for MS3450 series 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 LAYOUTS BY SHELL SIZE ^ 5015 QPL not all configurations For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 87 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 LAYOUTS BY SHELL SIZE SERIES KEY: 97 (e=97) AIT (I=MS; v=non QPL) AIB (=GT) VG95234 () MS3450 (q=MS; s=non QPL) Thermocouple (2) AI 22-14 e I 22-15 e I 22-16 e I T LAYOUT 97 Se rie s Se r AI ies B/ G T VG 95 23 M S3 4 45 0 TO TA L CONTACT METALLURGY KEY: Alumel (Al.) Chromel (Ch.) Constantan (Con.) Copper (Cu) Iron (Ir.) DEGREES OF ROTATION CONTACTS SIZES 20 16 12 8 4 0 2 W X Y Z SERVICE RATING q 19 1980 110 250 280 A s 6 1 580 110 250 280 A(A-C, E, F) E(D) 9 6 380 110 250 280 A 22-17 I^ s 9 8 180 110 250 280 D(A) A (all others) 22-18 e I s 8 880 110 250 280 A(C-E) D(all others) 22-19 e I q 14 1480 110 250 280 A 22-20 e I^ 9 935 110 250 325 A 3 2 180 110 250 280 A 4 -110 250 - A 22-21 I^ q 22-22 e I 22-23 e I I 22-24 q 4 q 8 835 - 250 - D(A-D): A(E-G) 6 280 110 250 280 D(C, D, E) A(A, B, F) 4 22-26 e7 5 22-27 e I 22-28 e I^ 7 22-30 e v s 19 22-31 e v 2 2 22-11 100 B 22-32 e v s 6 4 22-5 260 D 22-33 I^ 7 22-34 I e 22-36 22-57 v s 9 5 s s 2 - - 8 180 - 780 - 19 2 22-14 - - 1/8" spacing 250 280 - 280 100 D(J) A (all others) A A 780 110 250 280 D(A-D) A(E-G) 2 380 110 250 280 D 890 - 270 - D(H); A(all others) 8 19 19 2 22-14 45 A, C, E, G, J, L, N, R=Ir.; B, D, F, H, K, M, P, S=Con.; T, U, V=Cu 22-60 v s 19 19 22-62 v s 8 8 22-63 v 12 420 - - - A 22-65 v 88 - - - - D(H); A(all others) 22-68 v s 22-69 v s 14 14 22-70 v 13 22-71 v s 22-72 v 22-73 v 22-74 v 22-75 v 22-76 v 22-77 v 8 14 14 5 2 2 2 2 22-14 45 U=Al.; N=Ch.; Balance=Cu 22-23 60 A, B, F, G=Al.; C, D, E, H=Ch. 22-19 45 A, C, E, G, J, L, M=Ir.; B, D, F, H, K, P, N=Con. 22-19 45 A, C, E, G, J, L, M=Cu; B, D, F, H, K, P, N=Con. 8 - - - - A 22-79 v 2 22-14 V=Al.; U=Ch.; Balance=Cu s 6 4 2 2 22-5 B=Al.; E=Ch.; Balance=Cu s 6 4 2 2 22-5 E=Al.; B=Ch.; Balance=Cu s 8 8 2 22-23 A, C, E, G=Ir.; B, D, F, H=Con. s 8 8 2 22-23 A=Al.; B, D, G, H=Cu; C=Ch.; E=Ir.; F=Con. 21 212 W=Con.; Balance=Cu s 14 142 22-19 B, D, F, H, J, K, M, P=Cu; A, E, L=Ir.; C, G, N=Con. s 19 192 22-14 A, C, E, G, H, K, M, P, R, T=Con.; Balance=Cu s 4 42 22-10 A, C,=Con.; B, D=Cu 22-80 v 33 - - 24A35 v 16 I q 7 780 280 110 22-78v 24-2 e 24-3 I^ 19 19 14 2 24-7 - - 100 - 280 A A D 7 5 250 280 D 24-4 s 4 3 180 110 250 280 D 24-5 e I q 16 1680 110 250 280 24-6 e I^ s 8 880 110 250 280 24-7 e I q 16 280 110 250 280 14 A D(A,G,H) A(all others) A ^ 5015 QPL not all configurations 88 For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support * www.peigenesis.com * sales@peigenesis.com SERIES KEY: 97 (e=97) AIT (I=MS; v=non QPL) AIB (=GT) VG95234 () MS3450 (q=MS; s=non QPL) Thermocouple (2) DEGREES OF ROTATION CONTACTS SIZES 97 20 16 12 8 24-9 e I 24-10 e I q 7 780 - 24-11 e I q 9 6 335 110 24-12 e q 5 3 2 4 0 2 LAYOUT AI Se rie s T Se r AI ies B/ G T VG 95 23 M S3 4 45 0 TO TA L CONTACT METALLURGY KEY: Alumel (Al.) Chromel (Ch.) Constantan (Con.) Copper (Cu) Iron (Ir.) W X 235 110 280 110 I 24-15 v s 16 16 24-16 I^ 24-5 Y Z SERVICE RATING 250 325 A - 280 A 250 325 A 250 280 A 100 A s 7 3 3 180 110 250 280 D(A,B, F, G) A(C, D, E) 24-17 I^ 5 3 280 110 250 280 D 24-19 e v 12 12 - - - - A 24-20 e I q 11 9 250 280 D 24-21 e I s 10 9 180 110 250 280 D 24-22 e I q 4 445 110 250 - D e 24-24 s 16 280 110 16 24-5 250 A 24-25 e v 8 8 24-6 100 D(A, G, H) A(all others) 24-26 e v 24-27 e I 8 8 24-6 250 D(A, G, H) A(all others) s 7 7 80 - - 280 24-28 e I q 24 2480 110 250 280 24-51 v I - - A 24-52 v 24-53 v 55 -108 24-56 v s 11 9 - - A 24-57 v s 24 24 24-58 v 13 7 3 3 - - - - 24-59 v 14 7 7 - - - - A 24-60 v 77 - - - - A 24-62 v s 24 24 24-63 v s 24 24 5 1 HV 5 -108 E 1HV30 KVdc, 21 KVac 2 2 2 2 2 24-20 45E=Al.; F=Ch.; Balance=Cu 24-28 45 24-28 A, C, J, V, Y, W, K, E, H, U, S, M=Ch.; Balance=Al. A A, C, E, G=Ir.; B, D, F, H=Con.; R, T=Ch.; S, U=Al.; Balance=Cu 24-28 A, C, E, G, J, L, K, N, S, U, W, Y=Cu; B, D, F, H, Q, R, M, P, T, V, X, Z=Con. 24-64 v s 16 16 24-65 v 15 24-66 v 24-67 v 24-68 v s 24 24 24-71 v 77 - - 24-75 v 77 - - 24-79 v 5 24-80 v s 23 24-81 v 16 14 24-84 v 19 19 (18) - - - - 24-96 v 28 28 65 - - - I 24-AJ v 25 2580 110 250 280 A 19 9 -110 260 - A 9 6 380 110 250 280 D(A, E, J) A(all others) 14 235 110 250 325 D 3 70 145 215 290 E 28A63 24-5 A, B, C, D, E, F, G, H=Ir.; J, K, L, M, N, P, R, S=Con. 11 - - - - A 7 7 - - - - D 19 1916 - - - I - - A - - A - - A 240 300 I 28 4 2 2 24-28 D=Con.; Balance=Cu 5 -108 2335 145 2 2 24-7 A, C, E, G, I, K, M, N, P=Cu; B, D, F, H, J, L, O=Con. A/Coax 28-1 e I q 28-2 e I 28-3 e I s 3 28-4 I^ s 9 7 280 110 250 280 E(G, P, S) D(all others) 28-5 I^ s 5 2 1 235 110 250 325 D 28-6 3 370 145 215 290 D 2 235 110 250 325 D e I^ 28-7 v q Reduced contact crimp pot 12 ^ 5015 QPL not all configurations 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 LAYOUTS BY SHELL SIZE ( ) Number of contacts that are coax For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 89 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 LAYOUTS BY SHELL SIZE SERIES KEY: 97 (e=97) AIT (I=MS; v=non QPL) AIB (=GT) VG95234 () MS3450 (q=MS; s=non QPL) Thermocouple (2) T AI 97 LAYOUT Se rie s Se r i e AI B/ s G T VG 95 23 M S3 4 45 0 TO TA L CONTACT METALLURGY KEY: Alumel (Al.) Chromel (Ch.) Constantan (Con.) Copper (Cu) Iron (Ir.) DEGREES OF ROTATION CONTACTS SIZES 20 16 12 8 4 0 2 W X Y Z SERVICE RATING E (L, M) D(B) A (all others) 28-8 e I^ s 12 10 280110 250 280 28-9 e I q 12 6 680110 250 280 D 28-10 e I q 7 3 280110 250 280 D(G) A(all others) 28-11 e I q 22 18 480110 250 280 A 28-12 e I q 26 2690180 270 - 28-13 e v s 26 26 28-15 e I q 35 3580110 250 280 28-16 e I s 20 2080110 250 280 A 28-17 e I 15 1580110 250 280 A (A-L) B(R) D(M-P) 28-18 e I q s 12 1270145 215 290 C(M) D(G, H, J, K, L) 2 28-12 A 100 A A A(A, B) I(C, D, E, F) 28-19 e I s 10 6 480110 250 280 A(C, E, G, J, K, L) B (H, M) D(A, B) 28-20 e I^ q 14 4 1080110 250 280 A 28-21 e I q 37 3780110 250 280 A 28-22 I^ q 6 3 370145 215 290 D 28-51 v 12 1280135 195 - A 28-53 v s 22 18 4 28-58 v s 14 4 10 28-59 v 17 7- - 28-61 v s 37 37 10 2 2 2 28-11 45 J, L=Al.; K, M=Ch.; Balance=Cu 28-20 45 A, C, E, G, K, M=Al.; B, D, F, H, L, N=Ch.; J, P=Cu 28-21 v s 14 4 10 28-64 v s 35 35 - A A, C, J, Z, m, r, n, a, K, F, H, X, k, h, T, M, N, 45 A, C, E, G, J=Al.; B, D, F, H, P=Ch.; Balance=Cu 28-63 - 45 d=Ir.; Balance=Con. 2 2 28-20 2 28-12 A, C, E, G, J, L, N, R, T, V=Ir.; X, Z=Al.; B, D, F, H, 28-15 A, d=Al.; B, j=Ch.; C, D, E, F, G, N, P, R, S, H, J, K, L, M, W, X, Y, Z=Con.;Balance=Cu 28-65 v s 26 26 28-66v 16 28-67 v s 20 20 28-68 v s 35 35 28-69 v s 22 18 4 28-70 v s 22 4 28-72 v 3 3(3)- - 28-74 v 16 9 7 70 133 28-75 v 16 9 7 70 133 28-79 v 16 28-82 v 6 28-84 v 9 28-77 v s 22 18 28-81 v s 37 37 18 14 K, M, P, S, U, W=Con.;Y, a=Ch.; b, d=Cu 9 4 2 50 100 2 2 2 2 28-15 45 - - Coax 227 290 A 227 290 A 227 290 A - - D 90 135 A 28-11 A=Al.; B=Ch.; Balance=Cu 9 45 157 A T=Al.; U=Ch.; Balance=Cu 2- - 2 2 - 28-11 G=Al.; R=Ch.; Balance=Cu 7 70 133 4 165 28-16 U=Con.; Balance=Cu 28-11 J=Con.; Balance=Cu 28-21 A, D, S, Z, n, s=Ir.; B, J, K, f, g, r=Con.; G, L, P, b, e, j=Al.; F, H, T, X, h, k=Ch.; Balance=Cu 28-AY v 9 5 4 80 32A29 v 23 16 2 32A30 v 5 3 2 32-1 100 E(A) D(all others) 32A69 61 32-1 I 32-2 I q s 41 3 32-6 110 280 A A 250 - I 280110 250 280 E(A) D(all others) 3 70 145 215 290 E 3 2 250 250 20- 110 5 5 2 Reduced contact crimp pot ^ 5015 QPL not all configurations ( ) Number of contacts that are coax 90 For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support * www.peigenesis.com * sales@peigenesis.com SERIES KEY: 97 (e=97) AIT (I=MS; v=non QPL) AIB (=GT) VG95234 () MS3450 (q=MS; s=non QPL) Thermocouple (2) Se rie s Se AI ries B/ G T VG 95 23 M S3 4 45 0 TO TA L CONTACT METALLURGY KEY: Alumel (Al.) Chromel (Ch.) Constantan (Con.) Copper (Cu) Iron (Ir.) T AI 97 LAYOUT 20 12 4 2 I 32-4 I^ 1412 s 9 16 32-3 DEGREES OF ROTATION CONTACTS SIZES 8 4 2 0 W X 2 1 80 2 32-5 e I 32-6 e I q 2316 2 2 32-7 e I q 35 28 32-8 e I 3024 2 35 Y Z 110 250 280 110 250 280 A (F, J, K, N) D( all others) D 110 250 325 80 110 250 280 A 7 80 125 235 280 I (A, B, H, J) A (all others) 6 80 125 235 280 A 3 32-9 I^ q 32-10 I^ 732 2 D 14 122 80 110 250 280 D 2 80 110 250 280 E (A, F) B (G) 32-12 I^ 80 SERVICE RATING 1510 5 80 110 250 280 D(E) A(D) A (C, D, E, F, G) D(all others) 32-13 e I q 23 18 5 32-14 v13 13 80 110 250 280 D 65 130 230 295 D 250 280 D 32-15 I^ q 8 6 2 35 110 32-16 v s 2316 100 A 32-17 I q 44 45 110 D 32-19 v s 5 3 2 32-1 260 E(A) D(all others) 32-20 v s 2316 260 32-22 v s 54 54 80 32-25 v 25 25 e 2 2 3 3 2 32-6 2 32-6 250 - A 110 250 280 A 60 125 - - A 32-31 v 3131 80 125 215 280 A 32-48 v 4848 80 - - - I 32-51 v 3024 32-52 v 8 6 2 32-15 32-53 v 37 5 - 32-55 v 3024 6 2 32-8 32-56 v 30 24 6 - - - - A 32-57 v 8 62(2) - - - - Coax 42 6 2 32-8 90M=Ch.; N= Al.; Balance=Cu 90 - - - D I/E 125M, N=Ch.; O, P=Al.; Balance=Cu 32-58 v .44(4) - - - - Coax 32-59 v 42402(2) - - - - Coax 32-60 v 23 15 8(8) 72 145 215 200 A/Coax 32-62 v 23 16 2 3(2) - - - - A/Coax 32-63 q 2 - - - D 32-64 v 5454 80 100 110 250 I 32-68 v 16124(4) 30 - - - A/Coax 32-73 v q 36 - - - A 32-75 v 9 - - - Coax 32-76 v 19 19 44 147 254 - A 32-79 v 51 32-82 v 1612 4 32-414 55 - 46 46 2 7(7) 4 e5252 - - - - D 30 - - - A - - - - A 32-AF v 5555 80 110 250 280 A 36-1 2218 4 D 80 110 250 280 36-3 I^ 6 3 3 70 145 215 290 D 36-4 I^ 3 3 70 145 215 290 A (B, C) D(A) 36-5 e I q 120 240 - A 36-6 e I q 110 250 325 A 36-7 e I q 47 40 7 80 110 250 280 A 36-8 e I q 47 46 1 80 110 250 280 A e I^ Reduced contact crimp pot q 4 4 64 ^ 5015 QPL not all configurations 2 35 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 LAYOUTS BY SHELL SIZE ( ) Number of contacts that are coax For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 91 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 LAYOUTS BY SHELL SIZE SERIES KEY: 97 (e=97) AIT (I=MS; v=non QPL) AIB (=GT) VG95234 () MS3450 (q=MS; s=non QPL) Thermocouple (2) 97 AI T Se rie s Se r i e AI B/ s G T VG 95 23 M S3 4 45 0 TO TA L CONTACT METALLURGY KEY: Alumel (Al.) Chromel (Ch.) Constantan (Con.) Copper (Cu) Iron (Ir.) 36-9 e I q 36-10 e I 36-11 e v 36-12 e v LAYOUT DEGREES OF ROTATION CONTACTS SIZES 20 0 2 16 12 8 4 31 14 14 2 1 W X Y Z SERVICE RATING 80 125 235 280 A 48 48 80 125 235 280 A s 48 4836-10 100 A s 48 4836-10 250 A q 36-13 I^ 1715 2 80 110 250 36-14 I^ 16 6 5 90 180 270 - D 36-15 I q 35 35 60 125 245 305 D(M) A (all others) 36-16 v s 47 40 7 36-7 100 A 36-17 v s 47 40 7 36-7 250 A 36-18 v s 31 14 14 2 36-9 100 36-20 v 3430 2 2 36-21 v s 31 14 14 2 36-22 v 22 22 36-51 v 4 2 36-52 I^ q 52 52 72 36-53 v s 47 40 45 u, v, w=Al.; x, y, z=Ch.; Balance=Cu 36-54 v 3931 8 - - - - A 36-55 v 39318 - - - - A 36-56 v s e 5 1 1 2 7 48 48 - 36-9 260 - - - 127 144 36-7 2 2 - - 280 E (N,P,Q) A (all others) A - A A - - D - - D 216 288 A 36-10 A, C, E, G, L, J, H, P, R, T, V, X, Z, b, d, f, h, k, q, n, m, u, w, y=Con.; Balance=Cu 36-59 v 53 50 3 - - - - A 36-60 v 47 40 7 - - - - A 36-61 v s 35 35 2 36-15 A, C, E, J, K, L, M, N, P, R, T, V, f, X, Y, h, j, s 36-64 v 44(4) - - - - Coax 36-65 v 44(4) - - - - Coax 4 110 250 260 280 A 3 - - - - A 279 - - Coax - - - A 36-66 s 48 48 c=Con.; Balance=Cu 36-62 v 56 52 2 36-10 A, C, E=Al.; B, D, F=Ch.; Balance=Cu 36-71 v 5350 36-73v 77(7) 81 36-74 v 4443 36-75 v 4848 - - - - A 36-76 v 4747 - - - - A 36-77 v 77 81 279 - - D 36-78 v 14 212 35 106 254 325 A 36-79 v 20 20 30 110 250 330 A 36-80 v 20 30 110 250 330 A 36-82 v s 52 52 36-83 v 77(7) 81 36-85 v 35 36-403 1(1) - 20 2 36-52 v, g=Ir.; p, y, c=Con. x=Ch.; Balance=Cu 279 - - Coax 35 - - - - A/D - - - - A e5252 36-57 v s 47 46 1 35 35 2 2 36-58 v s 36-AF v 4848 40-1 I q 30 24 6 36-8 W=Al.; f=Ch.; Balance=Cu 36-15 H=Al.; G=Ch.; Balance=Cu 65 - - - A 65 130 235 300 D 40-2 s 23 23 80 110 250 280 D 40-3 s 2318 110 250 280 D 4 1 80 Reduced contact crimp pot ^ 5015 QPL not all configurations ( ) Number of contacts that are coax 92 For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support * www.peigenesis.com * sales@peigenesis.com SERIES KEY: 97 (e=97) AIT (I=MS; v=non QPL) AIB (=GT) VG95234 () MS3450 (q=MS; s=non QPL) Thermocouple (2) 2316 AI 40-4 s 97 20 LAYOUT 40-5## s 40-5 v DEGREES OF ROTATION CONTACTS SIZES T Se rie s Se r i e AI B/ s G T VG 95 23 M S3 4 45 0 TO TA L CONTACT METALLURGY KEY: Alumel (Al.) Chromel (Ch.) Constantan (Con.) Copper (Cu) Iron (Ir.) 16 12 8 4 2 3 15 6 4 0 2 X Y Z 2 80 110 250 280 2 80 110 250 280 A - - 270 A 3 5 5 33 40-6 s 2624 1 1 80 110 250 280 40-7 s 22 2 80 110 250 280 47 24 18 22 SERVICE RATING W 2 1 D D P,Q,U,V,W,X = A; Bal.= D 40-9 I q 65 125 225 310 40-10 I^ 2916 9 4 65 125 225 310 A 40-35 v 35 35 70 130 230 290 D 40-53 v 6060 80 110 250 280 A 40-56 I q 85 85 72 144 216 288 A 40-57 v 4 150 - - E 40-58 v s 85 85 4 2 30 A 40-56 A, C, E, H, K, M, P, S, U, W, Y, a, c, f, h, j, m, p, r, t, v, x, z, AB, AD, AF, AJ, AL,AN, AP, AS, AU, AW, AY, BA, BC, BE, BH, BK, BM, BP, BS, BU=Ir.; Balance=Con. 40-59 v s 85 85 40-61 v 5955 40-62 I s 40-63 v 6161 40-64 v 3620 40-66 v 44(4) - - - - Coax 40-67 v 111 10(10) - - - - A/Coax 40-68 v 2121 - - - - A 40-70 v 6161 - - - - A 40-72 v 111 10(10) - - - - A/Coax 40-73 v 6161 - - - - A 40-74 v 6 11(1) - - - - A/Coax 40-75 v 5 - - - - E 40-77 v 60 40-78 v 60 3 2 1 40-56 - - - - A 130 220 290 A - - - - A - - - - Coax 60 60 30 3 13(13) 1 4(4) 4 60 60 2 2 B=Ch.; C=Con.; Balance=Cu 40-56 55, 60=Ir.; 57, 58, 59=Con.; 56=Ch.; Balance=Cu 40-53 50 51=Ir.; 27, 28, 29, 31, 32, 34, 36, 37=Con.; 25, 39, 40, 41=Al 43,44,45, 46, 47, 48, 49, 52, 53, 54=Ch.; Balance=Cu 40-80 v 11110 72 144 210 288 A 40-81 v 6262 - - - - A 40-82 v 6262 - - - - A 40-85 v 6060 - - - - A 40-86 v 4 - - - - E/Coax 40-87 v 77 37 74 285 322 D 40-AD v 84 4 45 A 40-AG v 38 38 40-AT v 4318 40-AV v Reduced contact crimp pot 24 4(4) 1 3 ^ 5015 QPL not all configurations 3#2/0 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 LAYOUTS BY SHELL SIZE - - - 37 74 285 322 A 80 110 250 280 A 90 180 270 - D ( ) Number of contacts that are coax For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 93 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 PIN & SOCKET CRIMP CONTACTS PIN CONTACT SOCKET CONTACT * * * WIRE SIZE SOCKET CONTACT PIN CONTACT SILVER GOLD SILVER GOLD 16S 16-18-20 AIC16S-16P AIC16S-16PG AIC16S-16S AIC16S-16SG 12-14 AIC16S-12P AIC16S-12PG AIC16S-12S AIC16S-12SG 16S 14-16 AIC16S-14P AIC16S-14PG AIC16S-14S AIC16S-14SG C3 18-20 AIC16S-20P AIC16S-20PG AIC16S-20S AIC16S-20SG C13 20-22 AIC16S-22P AIC16S-22PG AIC16S-22S AIC16S-22SG C14 22-24 AIC16S-24P AIC16S-24PG AIC16S-24S AIC16S-24SG C2 16 16-18-20 AIC16-16P AIC16-16PG AIC16-16S AIC16-16SG - 12-14 AIC16-12P AIC16-12PG AIC16-12S AIC16-12SG C4 14-16 AIC16-14P AIC16-14PG AIC16-14S AIC16-14SG C3 18-20 AIC16-18P AIC16-18PG AIC16-18S AIC16-18SG C13 20-22 AIC16-20P AIC16-20PG AIC16-20S AIC16-20SG C14 20-24 AIC16-2024P AIC16-2024PG AIC16-2024S AIC16-2024SG C36 22-24 AIC16-22P AIC16-22PG AIC16-22S AIC16-22SG C2 12 12-14 AIC12-12P AIC12-12PG AIC12-12S AIC12-12SG - 12 High-Power - - AIC12-12SRAD - - 16 8-10 AIC12-8P AIC12-8PG AIC12-8S AIC12-8SG C5 12 10-12 AIC12-10P AIC12-10PG AIC12-10S AIC12-10SG C8 14-16 AIC12-14P AIC12-14PG AIC12-14S AIC12-14SG C9 16-18 AIC12-16P AIC12-16PG AIC12-16S AIC12-16SG C7 18-20 AIC12-18P AIC12-18PG AIC12-18S AIC12-18SG C6 20-22 AIC12-20P AIC12-20PG AIC12-20S AIC12-20SG C40 - 8 AIC8-8P AIC8-8PG AIC8-8S AIC8-8SG 8 8 High-Power - - AIC8-8SRAD - - 10-12 AIC8-10P AIC8-10PG AIC8-10S AIC8-10SG C10 12-14 AIC8-12P AIC8-12PG AIC8-12S AIC8-12SG C38 4 4 4 AIC4-4P AIC4-4PG AIC4-4S AIC4-4SG - 4 High-Power - - AIC4-4SRAD - - 8 AIC4-8P AIC4-8PG AIC4-8S AIC4-8SG C15 0 0 AIC0-0P AIC0-0PG AIC0-0S AIC0-0SG - 0 0 High-Power - - AIC0-0SRAD - - 0-2 AIC0-2P AIC0-2PG AIC0-2S AIC0-2SG C11 4 AIC0-4P AIC0-4PG AIC0-4S AIC0-4SG C12 WIRE SEALING RANGE INCHES (MM) - 8 WIRE STRIP LENGTHS INCHES (MM) C4 WIRE RANGE * PART NUMBER CONTACT SIZE WIRE STRIP LENGTHS .090 -.118 (2.3-3.0) .312 (7.9) .312 (7.9) .126 - .177 (3.2-4.5) .312 (7.9) .563 (14.3) .150 - .256 (3.8-6.5) .500 (12.7) .279 - .366 (7.1 - 9.3) . .750 (19.0) .394 - .539 (10.0 - 13.7) Bolded items are standard crimp contacts. SOLDER THERMOCOUPLE CONTACTS SOLDER THERMOCOUPLE CONTACTS TYPE 16S Alumel Chromel Iron 16S Constantan 16 Alumel Chromel Iron 16 Constantan 94 PINS SOCKETS 10-040799-02P* 10-040799-02S* 10-040799-03P* 10-040799-03S* 10-040799-01P* 10-040799-04P* 10-040799-12P* 10-040799-11P* 10-040799-13P* 10-040799-14P* 10-040799-01S* 10-040799-04S* 10-040799-12S* 10-040799-11S* 10-040799-13S* 10-040799-14S* TYPE 12 Alumel Chromel Iron 12 Constantan PINS SOCKETS 10-040799-42P* 10-040799-42S* 10-040799-43P* 10-040799-43S* 10-040799-41P* 10-040799-44P* 10-040799-41S* 10-040799-44S* Thermocouple Types: J = Iron-Constantan K = Alumel-Chromel T = Copper-Constantan E = Chromel-Constantan *Contact us for availability 16S contacts are used in 8S, 10S, 10SL, 12S, 14S and 16S connector sizes only. For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support * www.peigenesis.com * sales@peigenesis.com TOOLS ACCESSORIES AF8 WA27F 400BHD Die-set, locator and Go-No-Go gauge TH29-1 CONTACT SIZE WIRE HOLE FILLER COLOR CRIMP TOOLS CRIMP LOCATOR & DIE SETS 16S LOCATOR COLOR PILOT PIN/INSERTION GUIDE FOR SOCKETS INSERTION TOOL 10-242758-016 DAK168-16 EXTRACTION TOOL Red MS27488-16-3 (Blue) 16 AF8-(hand) WA27F(pneumatic) Pin-Blue Socket- TH29-1 Green DRK59 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 PIN & SOCKET CRIMP CONTACTS Kit with Multiple Tips 12 MS27488-12-3 (Yellow) 8 MS27488-8-3 (Red) 4 MS27488-4-3 (Blue) 0 MS27488-0-3 (Yellow) 400BHD Green 10-242758-012 DAK168-12 Die Set 414DA-8N Locator 4025-Pin 4026-Socket - 10-242758-008 DAK282 Die Set 414DA-4N Locator 4043-2 - - AIC4INS AIC4EXT Die Set 414DA-0N Locator 4042 - - AIC0INS AIC0EXT Contact us for additional tool accessories. For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 95 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 PIN & SOCKET COAX CONTACTS PIN CONTACT COAX CONTACT SIZE 12 8 4 COAX WIRE SIZE PINS SOCKET CONTACT PART NUMBER SOCKETS SILVER GOLD SILVER GOLD RG161/U RG174A/U RG179B/U RG187A/U RG188A/U RG316/U 21-33034-1 21-33014-21 21-33048-1() 21-33130-1() 21-33033-1 21-33013-21 21-33047-1() 21-33129-1 () RG178B/U RG196A/U - 21-33014-22 - 21-33013-22 RG58C/U RG141A/U RG303/U 21-33034-2(1) 21-33014-1(5) 21-33016-5(3) 21-33130-2() 21-33033-2(1) 21-33048-2() 21-33013-1(5) 21-33047-2() 21-33015-5(3) 21-33129-2() RG59B/U RG62A/U RG62B/U RG210/U 21-33034-5(1) 21-33014-5(5) 21-33016-2(3) 21-33130-5() 21-33064-21() 21-33033-5(1) 21-33013-5(5) 21-33015-2(3) 21-33129-3() 21-33063-21() RG161/U RG174A/U RG179B/U RG187A/U RG188A/U RG316/U 21-33034-3(1) 21-33014-3(5) 21-33016-1(3) 21-33130-3 () 21-33064-20() 21-33033-3(1) 21-33013-3(5) 21-33015-1(3) 21-33129-3() 21-33063-20() RG180B/U RG195A/U 21-33034-6 21-33014-6(5) 21-33048-3() 21-33130-6() 21-33033-6 21-33013-(6) 21-33047-3() 21-33129-6() RG140/U RG302/U 21-33034-8 21-33014-8(5) 21-33033-8 21-33130-8() 21-33033-8 21-33013-8(5) 21-33129-8() RG55B/U RG142A/U RG142B/U RG223/U 21-33034-4 21-33014-5(5) 21-33130-4() 21-33033-4 21-33013-5(5) 21-33129-4() RG59B/U RG62A/U RG62B/U RG210/U - 21-33060-10() - 21-33059-10() RG212/U - 21-33060-11() - 21-33059-11() RG55B/U RG142A/U RG142B/U RG223/U - 31-33060-12() - 21-33059-12() WIRE STRIP LENGTH WIRE STRIP LENGTHS INCHES (mm) WIRE RANGE ACCESSORIES WIRE SEALING RANGE WIRE HOLE INCHES (mm) MIN. MAX. FILLER Contact us for details 0.126 (3.2) 0.177 (4.5) Yellow 10-405996-12 Contact us for details 0.150 (3.8) 0.256 (6.5) White 10-405996-8 Contact us for details 0.279 (7.1) 0.366 (9.3) Blue 10-405996-4 ( ) Various platings available. Availability of coax contacts varies widely. Contact us for details. All dimensions in inches (millimeters in parenthesis) 96 For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support * www.peigenesis.com * sales@peigenesis.com TOOLS Crimp Dies COAX CONTACT SIZE COAX WIRE SIZE HAND-CRIMP TOOL CRIMP DIES USE LOCATOR COAX CLAMP NUT WRENCH RG161/U RG174A/U RG179B/U A RG187A/U M22520/10-01 M22520/10-05 12 11-8676-1 RG188A/U RG316/U RG178B/U B RG196A/U RG58C/U 11-8676-2 B M22520/10-07 M22520/10-01 RG141A/U RG303/U 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 PIN & SOCKET COAX CONTACTS RG59B/U RG62A/U M22520/5-45 11-8676-3 B M22520/5-01 RG62B/U RG210/U RG161/U RG174A/U RG179B/U A M22520/10-05 RG187A/U 8 RG188A/U RG316/U RG180B/U B RG195A/U M22520/10-01 11-8676-2 RG140/U RG302/U M22520/10-07 A RG55B/U RG142A/U RG142B/U RG223/U RG59B/U RG62A/U M22520/5-45 B B M22520/5-01 RG62B/U RG210/U 4 RG212/U M22520/5-01 M22520/5-01 M22520/5-39 M22520/5-39 A RG55B/U RG142A/U RG142B/U RG223/U M22520/10-01 M22520/10-07 A 11-8676-4 All dimensions in inches (millimeters in parenthesis) For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 97 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 COMPONENTS PLUGS AIB/GT AIBC/ACA-B RECEPTACLES AIB/GT AIBC/ACA-B O-Ring Barrel/Shell Insert/ Insulator Contacts Wave Spring and Skid Washer (Optional) Coupling Nut Individual Wire Sealing Grommet Ferrule/Sleeve Compression Ring Endbell/ Backshell/ Cable Clamp 98 For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support * www.peigenesis.com * sales@peigenesis.com PRINTED CIRCUIT CONTACTS SHELL SIZE H SERIES S X 10SL .188 .567 (4.78) (14.40) 14S .188 .567 (4.78) (14.40) 16S .188 .567 (4.78) (14.40) 16 .188 .622 (4.78) (15.80) 18 .188 .622 (4.78) (15.80) 20 .188 .622 (4.78) (15.80) 22 .188 .622 (4.78) (15.80) 24 .188 .622 (4.78) (15.80) 28 .188 .657 (4.78) (16.69) 32 .188 .720 (4.78) (18.29) 36 .188 .720 (4.78) (18.29) 40 .188 .720 (4.78) (18.29) CONTACT SIZE D 12 .134 .070 (3.4) (1.78) 16 P .063 .030 (1.6) (0.76) 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 DIMENSIONS All dimensions in inches (millimeters in parenthesis) For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 99 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 DIMENSIONS STYLE 0, 2, 20, 30 RECEPTACLES M P M P T R N S KK KK2 N B L R L L1 S 2 M N P SHELL +.016-.000 +.000-.006 .008 SIZE (+0.4-0.0) (+0.00-0.15) (0.2) R S 0, 20, 30 T .004 (0.1) .012 (0.3) +.004-.000 (+0.1-0.0) KK MAX. 0, 20, 30 RV B THREAD CLASS 2A L + .012 (+ 0.3) L1 MAX. KK2 MAX. 10SL .717 .717 .110 .717 1.000 .126 .626 .6250-24 UNEF 1.087 1.890 .787 (18.2) (18.2) (2.8) (18.2) (25.4) (3.2) (15.9) (27.6) (48.0) (20.0) 14S .717 .969 .126 .906 1.181 .126 .756 .7500-20 UNEF 1.087 1.890 .945 (18.2) (24.6) (3.2) (23.0) (30.0) (3.2) (19.2) (27.6) (48.0) (24.0) 1.024 16S .717 1.079 .126 .969 1.280 .126 .882 .8750-20 UNEF 1.087 1.890 (18.2) (27.4) (3.2) (24.6) (32.5) (3.2) (22.4) (27.6) (48.0) (26.0) 16 .846 1.079 .126 .969 1.280 .126 .882 .8750-20 UNEF 1.331 2.205 1.024 (21.5) (27.4) (3.2) (24.6) (32.5) (3.2) (22.4) (33.8) (56.0) (26.0) 18 .907 1.213 .157 1.063 1.378 .126 1.008 1.0000-20 UNEF 1.331 2.244 1.161 (23.1) (30.8) (4.0) (27.0) (35.0) (3.2) (25.6) (33.8) (57.0) (29.5) 20 .907 1.346 .157 1.157 1.496 .126 1.142 1.1250-18 UNEF 1.331 2.244 1.299 (23.1) (34.2) (4.0) (29.4) (38.0) (3.2) (29.0) (33.8) (57.0) (33.0) 22 .907 1.472 .157 1.252 1.614 .126 1.268 1.2500-18 UNEF 1.331 2.244 1.417 (23.1) (37.4) (4.0) (31.8) (41.0) (3.2) (32.2) (33.8) (57.0) (36.0) 24 .907 1.610 .157 1.374 1.752 .146 1.390 1.3750-18 UNEF 1.331 2.244 1.575 (23.1) (40.9) (4.0) (34.9) (44.5) (3.7) (35.3) (33.8) (57.0) (40.0) 28 .947 1.839 .157 1.563 2.000 .146 1.630 1.6250-18 UNEF 1.406 2.244 1.811 (24.1) (46.7) (4.0) (39.7) (50.8) (3.7) (41.4) (35.7) (57.0) (46.0) 32 .947 2.102 .157 1.752 2.244 .169 1.882 1.8750-16 UN 1.469 2.362 2.028 (24.1) (53.4) (4.0) (44.5) (57.0) (4.3) (47.8) (37.3) (60.0) (51.5) 36 .947 2.346 .157 1.937 2.500 .169 2.063 2.0625-16 UN 1.469 2.362 2.283 (24.1) (59.6) (4.0) (49.2) (63.5) (4.3) (52.4) (37.3) (60.0) (58.0) 40 .947 2.579 .157 2.185 2.752 .169 2.323 2.3125-16 UN 1.469 2.362 2.539 (24.1) (65.5) (4.0) (55.5) (69.9) (4.3) (59.0) (37.3) (60.0) (64.5) All dimensions in inches (millimeters in parenthesis) 100 For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support * www.peigenesis.com * sales@peigenesis.com STYLE 0, 20, 30 RECEPTACLES B Thread B Thread F Z F K1 K2 L1 BB JJ J L2 K3 L3 F B THREAD CLASS 2A .6250-24 UNEF .7500-20 UNEF .8750-20 UNEF .8750-20 UNEF 1.0000-20 UNEF 1.1875-18 UNEF 1.1875-18 UNEF 1.4375-18 UNEF 1.4375-18 UNEF 1.7500-18 UNS 2.0000-18 UNS 2.2500-16 UN L G F MIN. K1 MIN. K2 MIN. L2 MAX. L3 MAX. J .008 (0.2) K3 + .020 (0.5) L4 MAX. .409 .374 2.110 1.969 3.197 .138 .461 1.969 (10.4) (9.5) (53.6) (50.0) (81.2) (3.5) (11.7) (50.0) Z MIN. BB MAX. JJ + .008 (+0.2) (7.7) (13.3) (15.5) .303 .524 .610 .520 .374 2.145 1.969 3.232 .138 .461 1.969 .417 .669 .752 (13.2) (9.5) (54.5) (50.0) (82.1) (3.5) (11.7) (50.0) (10.6) (17.0) (19.1) .638 .374 2.145 1.969 3.232 .138 .461 1.969 .531 .862 .941 (16.2) (9.5) (54.5) (50.0) (82.1) (3.5) (11.7) (50.0) (13.5) (21.9) (23.9) .638 .374 2.240 2.362 3.571 .138 .453 2.362 .531 .862 .941 (16.2) (9.5) (56.9) (60.0) (90.7) (3.5) (11.5) (60.0) (13.5) (21.9) (23.9) .756 .374 2.315 2.362 3.646 .138 .453 2.362 .575 .862 .941 (19.2) (9.5) (58.8) (60.0) (92.6) (3.5) (11.5) (60.0) (14.6) (21.9) (23.9) .867 .374 2.300 2.362 3.631 .138 .500 2.559 .736 1.031 1.165 (22.0) (9.5) (58.4) (60.0) (92.2) (3.5) (12.7) (65.0) (18.7) (26.2) (29.6) .965 .374 2.305 2.362 3.636 .138 .500 2.559 .819 1.031 1.165 (24.5) (9.5) (58.5) (60.0) (92.4) (3.5) (12.7) (65.0) (20.8) (26.2) (29.6) 1.094 .374 2.320 2.560 3.651 .138 .500 2.559 .969 1.358 1.488 (27.8) (9.5) (58.9) (65.0) (92.7) (3.5) (12.7) (65.0) (24.6) (34.5) (37.8) 1.228 .374 2.490 2.560 3.896 .138 .500 2.559 1.063 1.358 1.488 (31.2) (9.5) (63.2) (65.0) (99.0) (3.5) (12.7) (65.0) (27.0) (34.5) (37.8) 1.488 .433 2.635 2.560 4.104 .138 .598 2.756 1.311 1.717 1.882 (37.8) (11.0) (66.9) (65.0) (104.2) (3.5) (15.2) (70.0) (33.3) (43.6) (47.8) 1.780 .465 2.680 3.150 4.149 .138 .598 3.150 1.516 1.717 1.882 (45.2) (11.8) (68.1) (80.0) (105.4) (3.5) (15.2) (80.0) (38.5) (43.6) (47.8) 2.016 .465 2.680 3.150 4.149 .138 .610 3.150 1.898 2.071 2.276 (51.2) (11.8) (68.1) (80.0) (105.4) (3.5) (15.5) (80.0) (48.2) (52.6) (57.8) 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 DIMENSIONS All dimensions in inches (millimeters in parenthesis) For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 101 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 DIMENSIONS STYLE 1 CABLE RECEPTACLE M P B N KK Q S L L RV SHELL SIZE M +.016 -.000 (+0.4 - 0.0) N +.000 -.006 (+0.00-0.15) P .008 (0.2) Q .008 (0.2) S MAX. B THREAD CLASS 2A L + .012 (+ 0.3) L1 MAX. KK MAX. 10SL .717 .717 .110 .811 .992 .6250-24 UNEF 1.087 1.890 .787 (18.2) (18.2) (2.8) (20.6) (25.2) (27.6) (48.0) (20.0) 14S .717 .969 .126 1.000 1.173 .7500-20 UNEF 1.087 1.890 .945 (18.2) (24.6) (3.2) (25.4) (29.8) (27.6) (48.0) (24.0) 16S .717 1.079 .126 1.126 1.272 .8750-20 UNEF 1.087 1.890 1.024 (18.2) (27.4) (3.2) (28.6) (32.3) (27.6) (48.0) (26.0) 16 .846 1.079 .126 1.126 1.272 .8750-20 UNEF 1.331 2.205 1.024 (21.5) (27.4) (3.2) (28.6) (32.3) (33.8) (56.0) (26.0) 18 .907 1.213 .157 1.248 1.370 1.0000-20 UNEF 1.331 2.244 1.161 (23.0) (30.8) (4.0) (31.7) (34.8) (33.8) (57.0) (29.5) 20 .907 1.346 .157 1.374 1.488 1.1250-18 UNEF 1.331 2.244 1.299 (23.0) (34.2) (4.0) (34.9) (37.8) (33.8) (57.0) (33.0) 22 .907 1.472 .157 1.500 1.618 1.2500-18 UNEF 1.331 2.244 1.417 (23.0) (37.4) (4.0) (38.1) (41.1) (33.8) (57.0) (36.0) 24 .907 1.610 .157 1.626 1.756 1.3750-18 UNEF 1.331 2.244 1.575 (23.0) (40.9) (4.0) (41.3) (44.6) (33.8) (57.0) (40.0) 28 .947 1.839 .157 1.874 2.004 1.6250-18 UNEF 1.406 2.244 1.811 (24.1) (46.7) (4.0) (47.6) (50.9) (35.7) (57.0) (46.0) 32 .947 2.102 .157 2.126 2.248 1.8750-16 UN 1.469 2.362 2.028 (24.1) (53.4) (4.0) (54.0) (57.1) (37.3) (60.0) (51.5) 36 .947 2.346 .157 2.386 2.504 2.0625-16 UN 1.469 2.362 2.283 (24.1) (59.6) (4.0) (60.6) (63.6) (37.3) (60.0) (58.0) 40 .947 2.579 .157 2.618 2.756 2.3125-16 UN 1.469 2.362 2.539 (24.1) (65.5) (4.0) (66.5) (70.0) (37.3) (60.0) (64.5) All dimensions in inches (millimeters in parenthesis) 102 For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support * www.peigenesis.com * sales@peigenesis.com STYLE 1 CABLE RECEPTACLE B Thread B Thread F F K2 Z BB JJ K1 J L1 L2 K3 L L B THREAD CLASS 2A .6250-24 UNEF .7500-20 UNEF .8750-20 UNEF .8750-20 UNEF 1.0000-20 UNEF 1.1875-18 UNEF 1.1875-18 UNEF 1.4375-18 UNEF 1.4375-18 UNEF 1.7500-18 UNS 2.0000-18 UNS 2.2500-16 UN G F F MIN. K1 MIN. K2 MAX. L3 MAX. L2 MAX. J .008 (0.2) K3 + .020 (0.5) L4 MAX. Z MIN. BB MAX. 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 DIMENSIONS JJ + .008 (+0.2) .409 .374 2.110 1.969 3.197 .138 .461 1.969 .303 .524 .610 (10.4) (9.5) (53.6) (50.0) (81.2) (3.5) (11.7) (50.0) (7.7) (13.3) (15.5) .520 .374 2.145 1.969 3.232 .138 .461 1.969 .417 .669 .752 (13.2) (9.5) (54.5) (50.0) (82.1) (3.5) (11.7) (50.0) (10.6) (17.0) (19.1) .638 .374 2.145 1.969 3.232 .138 .461 1.969 .531 .862 .941 (16.2) (9.5) (54.5) (50.0) (82.1) (3.5) (11.7) (50.0) (13.5) (21.9) (23.9) .638 .374 2.240 2.362 3.571 .138 .453 2.362 .531 .862 .941 (16.2) (9.5) (56.9) (60.0) (90.7) (3.5) (11.5) (60.0) (13.5) (21.9) (23.9) .756 .374 2.315 2.362 3.646 .138 .453 2.362 .575 .862 .941 (19.2) (9.5) (58.8) (60.0) (92.6) (3.5) (11.5) (60.0) (14.6) (21.9) (23.9) .867 .374 2.300 2.362 3.631 .138 .500 2.559 .736 1.031 1.165 (22.0) (9.5) (58.4) (60.0) (92.2) (3.5) (12.7) (65.0) (18.7) (26.2) (29.6) .965 .374 2.305 2.362 3.636 .138 .500 2.559 .819 1.031 1.165 (24.5) (9.5) (58.5) (60.0) (92.4) (3.5) (12.7) (65.0) (20.8) (26.2) (29.6) 1.094 .374 2.320 2.560 3.651 .138 .500 2.559 .969 1.358 1.488 (27.8) (9.5) (58.9) (65.0) (92.7) (3.5) (12.7) (65.0) (24.6) (34.5) (37.8) 1.228 .374 2.490 2.560 3.896 .138 .500 2.559 1.063 1.358 1.488 (31.2) (9.5) (63.2) (65.0) (99.0) (3.5) (12.7) (65.0) (27.0) (34.5) (37.8) 1.488 .433 2.635 2.560 4.104 .138 .598 2.756 1.311 1.717 1.882 (37.8) (11.0) (66.9) (65.0) (104.2) (3.5) (15.2) (70.0) (33.3) (43.6) (47.8) 1.780 .465 2.680 3.150 4.149 .138 .598 3.150 1.516 1.717 1.882 (45.2) (11.8) (68.1) (80.0) (105.4) (3.5) (15.2) (80.0) (38.5) (43.6) (47.8) 2.016 .465 2.680 3.150 4.149 .138 .610 3.150 1.898 2.071 2.276 (51.2) (11.8) (68.1) (80.0) (105.4) (3.5) (15.5) (80.0) (48.2) (52.6) (57.8) All dimensions in inches (millimeters in parenthesis) For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 103 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 DIMENSIONS STYLE 4 RUBBER-COVERED PLUGS Q B KK S L L RV SHELL SIZE Q MAX. S MAX. B THREAD CLASS 2A L + .012 (+ 0.3) L1 MAX. KK MAX. 10SL 1.319 1.122 .6250-24 UNEF 1.087 1.417 .787 (33.5) (28.5) (27.6) (36.0) (20.0) 18 1.929 1.713 1.0000-20 UNEF 1.331 1.929 1.161 (49.0) (43.5) (33.8) (49.0) (29.5) 20 2.028 1.811 1.1250-18 UNEF 1.331 1.969 1.299 (51.5) (46.0) (33.8) (50.0) (33.0) 22 2.224 1.988 1.2500-18 UNEF 1.331 1.969 1.417 (56.5) (50.5) (33.8) (50.0) (36.0) 24 2.362 2.126 1.3750-18 UNEF 1.331 2.008 1.575 (60.0) (54.0) (33.8) (51.0) (40.0) 28 2.638 2.402 1.6250-18 UNEF 1.406 2.008 1.811 (67.0) (61.0) (35.7) (51.0) (46.0) 32 2.992 2.661 1.8750-16 UN 1.469 2.087 2.028 (76.0) (67.6) (37.3) (53.0) (51.5) 36 3.240 2.925 2.0625-16 UN 1.469 2.106 2.283 (82.3) (74.3) (37.3) (53.5) (58.0) 40 3.465 3.150 2.3125-16 UN 1.469 2.126 2.539 (88.0) (80.0) (37.3) (54.0) (64.5) All dimensions in inches (millimeters in parenthesis) 104 For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support * www.peigenesis.com * sales@peigenesis.com STYLE 4 RUBBER-COVERED PLUGS B Thread B Thread F F K1 Z K2 L1 BB JJ J L2 K3 3 L F B THREAD CLASS 2A .6250-24 UNEF 1.0000-20 UNEF 1.1875-18 UNEF 1.1875-18 UNEF 1.4375-18 UNEF 1.4375-18 UNEF 1.7500-18 UNS 2.0000-18 UNS 2.2500-16 UN G L F MIN. K1 MIN. K2 MIN. L2 MAX. L3 MAX. .409 .374 2.110 1.969 3.197 (10.4) (9.5) (53.6) (50.0) (81.2) J .008 (0.2) K3 + .020 (0.5) .138 (3.5) 1.969 Z MIN. BB MAX. JJ + .008 (+0.2) .461 L4 MAX. .524 .610 (11.7) (50.0) (7.7) (13.3) (15.5) .303 .756 .374 2.315 2.362 3.646 .138 .453 2.362 .575 .862 .941 (19.2) (9.5) (58.8) (60.0) (92.6) (3.5) (11.5) (60.0) (14.6) (21.9) (23.9) .867 .374 2.300 2.362 3.631 .138 .500 2.559 .736 1.031 1.165 (22.0) (9.5) (58.4) (60.0) (92.2) (3.5) (12.7) (65.0) (18.7) (26.2) (29.6) .965 .374 2.305 2.362 3.636 (24.5) (9.5) (58.5) (60.0) (92.4) . .138 .500 2.559 .819 1.031 1.165 (3.5) (12.7) (65.0) (20.8) (26.2) (29.6) 1.094 .374 2.320 2.560 3.651 .138 .500 2.559 .969 1.358 1.488 (27.8) (9.5) (58.9) (65.0) (92.7) (3.5) (12.7) (65.0) (24.6) (34.5) (37.8) 1.228 .374 2.490 2.560 3.896 (31.2) (9.5) (63.2) (65.0) (99.0) . .138 .500 2.559 1.063 1.358 1.488 (3.5) (12.7) (65.0) (27.0) (34.5) (37.8) 1.488 .433 2.635 2.560 4.104 .138 .598 2.756 1.311 1.717 1.882 (37.8) (11.0) (66.9) (65.0) (104.2) (3.5) (15.2) (70.0) (33.3) (43.6) (47.8) 1.780 .465 2.680 3.150 4.149 .138 .598 3.150 1.516 1.717 1.882 (45.2) (11.8) (68.1) (80.0) (105.4) (3.5) (15.2) (80.0) (38.5) (43.6) (47.8) 2.016 .465 2.680 3.150 4.149 .138 .610 3.150 1.898 2.071 2.276 (51.2) (11.8) (68.1) (80.0) (105.4) (3.5) (15.5) (80.0) (48.2) (52.6) (57.8) 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 DIMENSIONS All dimensions in inches (millimeters in parenthesis) For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 105 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 DIMENSIONS STYLE 6, 6HD PLUGS B KK L Q1 Q2 6 SHELL SIZE L RV 6HD Q1 MAX. Q2 MAX. B THREAD CLASS 2A L + .012 (+ 0.3) L1 MAX. KK MAX. 10SL .898 1.007 .6250-24 UNEF 1.087 1.417 .787 (22.8) (25.5) (27.6) (36.0) (20.0) 14S 1.150 1.259 .7500-20 UNEF 1.087 1.437 .945 (29.2) (31.9) (27.6) (36.5) (24.0) 16S 1.260 1.410 .8750-20 UNEF 1.087 1.437 1.024 (32.0) (35.8) (27.6) (36.5) (26.0) 16 1.260 1.410 .8750-20 UNEF 1.331 1.929 1.024 (32.0) (35.8) (33.8) (49.0) (26.0) 18 1.437 1.547 1.0000-20 UNEF 1.331 1.929 1.161 (36.5) (39.2) (33.8) (49.0) (29.5) 20 1.571 1.681 1.1250-18 UNEF 1.331 1.969 1.299 (39.9) (42.6) (33.8) (50.0) (33.0) 22 1.697 1.847 1.2500-18 UNEF 1.331 1.969 1.417 (43.1) (46.9) (33.8) (50.0) (36.0) 24 1.835 1.965 1.3750-18 UNEF 1.331 2.008 1.543 (46.6) (49.9) (33.8) (51.0) (39.2) 28 2.102 2.222 1.6250-18 UNEF 1.406 2.008 1.811 (53.4) (56.4) (35.7) (51.0) (46.0) 32 2.366 2.482 1.8750-16 UN 1.469 2.087 2.028 (60.1) (63.0) (37.3) (53.0) (51.5) 36 2.610 2.721 2.0625-16 UN 1.469 2.106 2.283 (66.3) (69.1) (37.3) (53.5) (58.0) 40 2.850 2.953 2.3125-16 UN 1.469 2.126 2.539 (72.4) (75.0) (37.3) (54.0) (64.5) All dimensions in inches (millimeters in parenthesis) 106 For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support * www.peigenesis.com * sales@peigenesis.com 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 DIMENSIONS STYLE 6, 6HD PLUGS B Thread B Thread F F K1 Z K2 L1 BB JJ J L2 K3 3 L F B THREAD CLASS 2A .6250-24 UNEF .7500-20 UNEF .8750-20 UNEF .8750-20 UNEF 1.0000-20 UNEF 1.1875-18 UNEF 1.1875-18 UNEF 1.4375-18 UNEF 1.4375-18 UNEF 1.7500-18 UNS 2.0000-18 UNS 2.2500-16 UN L F MIN. K1 MIN. K2 MIN. L2 MAX. G L3 MAX. J .008 (0.2) K3 + .020 (0.5) L4 MAX. Z MIN. BB MAX. JJ + .008 (+0.2) .409 .374 2.110 1.969 3.197 .138 .461 1.969 .303 .524 .610 (10.4) (9.5) (53.6) (50.0) (81.2) (3.5) (11.7) (50.0) (7.7) (13.3) (15.5) .520 .374 2.145 1.969 3.232 .138 .461 1.969 .417 .669 .752 (13.2) (9.5) (54.5) (50.0) (82.1) (3.5) (11.7) (50.0) (10.6) (17.0) (19.1) .638 .374 2.145 1.969 3.232 .138 .461 1.969 .531 .862 .941 (16.2) (9.5) (54.5) (50.0) (82.1) (3.5) (11.7) (50.0) (13.5) (21.9) (23.9) .638 .374 2.240 2.362 3.571 .138 .453 2.362 .531 .862 .941 (16.2) (9.5) (56.9) (60.0) (90.7) (3.5) (11.5) (60.0) (13.5) (21.9) (23.9) .756 .374 2.315 2.362 3.646 .138 .453 2.362 .575 .862 .941 (19.2) (9.5) (58.8) (60.0) (92.6) (3.5) (11.5) (60.0) (14.6) (21.9) (23.9) .867 .374 2.300 2.362 3.631 .138 .500 2.559 .736 1.031 1.165 (22.0) (9.5) (58.4) (60.0) (92.2) (3.5) (12.7) (65.0) (18.7) (26.2) (29.6) .965 .374 2.305 2.362 3.636 .138 .500 2.559 .819 1.031 1.165 (24.5) (9.5) (58.5) (60.0) (92.4) (3.5) (12.7) (65.0) (20.8) (26.2) (29.6) 1.094 .374 2.320 2.560 3.651 .138 .500 2.559 .969 1.358 1.488 (27.8) (9.5) (58.9) (65.0) (92.7) (3.5) (12.7) (65.0) (24.6) (34.5) (37.8) 1.228 .374 2.490 2.560 3.896 .138 .500 2.559 1.063 1.358 1.488 (31.2) (9.5) (63.2) (65.0) (99.0) (3.5) (12.7) (65.0) (27.0) (34.5) (37.8) 1.488 .433 2.635 2.560 4.104 .138 .598 2.756 1.311 1.717 1.882 (37.8) (11.0) (66.9) (65.0) (104.2) (3.5) (15.2) (70.0) (33.3) (43.6) (47.8) 1.780 .465 2.680 3.150 4.149 .138 .598 3.150 1.516 1.717 1.882 (45.2) (11.8) (68.1) (80.0) (105.4) (3.5) (15.2) (80.0) (38.5) (43.6) (47.8) 2.016 .465 2.680 3.150 4.149 .138 .610 3.150 1.898 2.071 2.276 (51.2) (11.8) (68.1) (80.0) (105.4) (3.5) (15.5) (80.0) (48.2) (52.6) (57.8) All dimensions in inches (millimeters in parenthesis) For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 107 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 DIMENSIONS PLUG STYLE 6, 6HD RIGHT ANGLE J B F Q1 6 SHELL SIZE L Q2 6HD Q1 MAX. Q2 MAX. 10SL .898 1.007 (22.8) (25.5) 14S 1.150 1.259 (29.2) (31.9) 16S 1.260 1.410 (32.0) (35.8) 16 1.260 1.410 (32.0) (35.8) 18 1.437 1.547 (36.5) (39.2) 20 1.571 1.681 (39.9) (42.6) 22 1.697 1.847 (43.1) (46.9) 24 1.835 1.965 (46.6) (49.9) 28 2.102 2.222 (53.4) (56.4) 32 2.366 2.482 (60.1) (63.0) 36 2.610 2.721 (66.3) (69.1) 40 2.850 2.953 (72.4) (75.0) T B THREAD CLASS 2A F MAX. J MIN. K MAX. L MAX. .6250-24 UNEF .337 .370 1.181 1.772 (8.5) (9.4) (30.0) (45.0) .7500-20 UNEF .8750-20 UNEF .8750-20 UNEF 1.0000-20 UNEF 1.1875-18 UNEF 1.1875-18 UNEF .462 .370 1.181 1.850 (11.7) (9.4) (30.0) (47.0) .587 .370 1.181 1.890 (14.9) (9.4) (30.0) (48.0) .587 .370 1.181 2.244 (14.9) (9.4) (30.0) (57.0) .685 .370 1.378 2.283 (17.4) (9.4) (35.0) (58.0) .810 .370 1.378 2.402 (20.5) (9.4) (35.0) (61.0) .915 .370 1.378 2.402 (23.2) (9.4) (35.0) (61.0) 1.4375-18 UNEF 1.025 .370 1.575 2.598 (26.0) (9.4) (40.0) (66.0) 1.4375-18 UNEF 1.139 .370 1.575 2.598 (28.9) (9.4) (40.0) (53.4) 1.7500-18 UNS 1.447 .433 1.772 2.835 (36.7) (11.0) (45.0) (72.0) 2.0000-18 UNS 1.687 .496 1.969 2.953 (42.8) (12.6) (50.0) (75.0) 2.2500-16 UN 1.923 .496 2.165 3.071 (48.8) (12.6) (55.1) (78.0) All dimensions in inches (millimeters in parenthesis) 108 For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support * www.peigenesis.com * sales@peigenesis.com 6B PANEL PLUG STYLE TB THRU-BULKHEAD RECEPTACLE M P P Q N N L L T S R T R S S R R 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 DIMENSIONS S 6B SHELL SIZE 10SL TB L APPROX. Q MAX. P .008 (0.2) .898 .110 .717 1.000 .126 (27.6) (22.8) (2.8) (18.2) (25.4) (3.2) 1.087 R .004 (0.1) S .012 (0.3) T +.004-.000 (+0.1-0.0) L MAX. 1.488 (37.7) P M N +.016-.000 +.000-.006 .008 (+0.4-0.0) (+0.00-0.15) (0.2) .717 .717 .110 (18.2) (18.2) (2.8) R .004 (0.1) S T .012 +.004 -.000 (0.3) (+0.1-0.0) .717 1.000 .126 (18.2) (25.4) (3.2) 14S 1.091 1.150 .126 .906 1.181 .126 1.488 .717 .969 .126 .906 1.181 .126 (27.7) (29.2) (3.2) (23.0) (30.0) (3I.2) (37.7) (18.2) (24.6) (3.2) (23.0) (30.0) (3.2) 16S 1.091 1.260 .126 .969 1.280 .126 1.488 .717 1.079 .126 .969 1.280 .126 (27.7) (32.0) (3.2) (24.6) (32.5) (3.2) (37.7) (18.2) (24.6) (3.2) (23.0) (30.0) (3.2) 16 1.469 1.260 .126 .969 1.280 .126 2.049 .846 1.079 .126 .969 1.280 .126 (37.3) (32.0) (3.2) (24.6) (32.5) (3.2) (52.0) (21.5) (27.4) (3.2) (24.6) (32.5) (3.2) 18 1.500 1.437 .157 1.063 1.378 .126 2.049 .907 1.213 .157 1.063 1.378 .126 (38.1) (36.5) (4.0) (27.0) (35.0) (3.2) (52.0) (23.0) (30.8) (4.0) (27.0) (35.0) (3.2) 20 1.500 1.571 .157 1.157 1.496 .126 2.049 .907 1.346 .157 1.157 1.496 .126 (38.1) (39.9) (4.0) (29.4) (38.0) (3.2) (52.0) (23.0) (34.2) (4.0) (29.4) (38.0) (3.2) 22 1.500 1.697 .157 1.252 1.614 .126 2.049 .907 1.472 .157 1.252 1.614 .126 (38.1) (43.1) (4.0) (31.8) (41.0) (3.2) (52.0) (23.0) (37.4) (4.0) (31.8) (41.0) (3.2) 24 1.598 1.835 .157 1.374 1.752 .146 2.049 .907 1.610 .157 1.374 1.752 .146 (40.6) (46.6) (4.0) (34.9) (44.5) (3.7) (52.0) (23.0) (40.9) (4.0) (34.9) (44.5) (3.7) 28 1.626 2.102 .157 1.563 2.000 .146 2.049 .947 1.839 .157 1.563 2.000 .146 (41.3) (53.4) (4.0) (39.7) (50.8) (3.7) (52.0) (24.0) (46.7) (4.0) (39.7) (50.8) (3.7) 32 1.764 2.366 .157 1.752 2.244 .169 2.049 .947 2.102 .157 1.752 2.244 .169 (44.8) (60.1) (4.0) (44.5) (57.0) (4.3) (52.0) (24.0) (53.4) (4.0) (44.5) (57.0) (4.3) 36 1.764 2.610 .157 1.937 2.500 .169 2.049 .947 2.346 .157 1.937 2.500 .169 (44.8) (66.3) (4.0) (49.2) (63.5) (4.3) (52.0) (24.0) (59.6) (4.0) (49.2) (63.5) (4.3) 40 1.764 2.850 .157 2.185 2.752 .169 2.049 .947 2.579 .157 2.185 2.752 .169 (44.8) (72.4) (4.0) (55.5) (69.9) (4.3) (52.0) (24.0) (65.5) (4.0) (55.5) (69.9) (4.3) All dimensions in inches (millimeters in parenthesis) For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 109 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 DIMENSIONS STYLE 7, 70 JAM NUT RECEPTACLES S G G S R 7 SHELL SIZE 10SL B THREAD CLASS 2A .8750-20 UNEF 14S 1.1250-18 UNEF 16S 1.2500-18 UNEF 16 1.2500-18 UNEF 18 1.3750-18 UNEF 20 1.5000-18 UNEF 22 1.6250-18 UNEF 24 1.7500-18 UNEF 28 2.0000-18 UNS 32 2.2500-16 UN 36 2.5000-16 UN 40 2.7500-16 UN G .012 (0.3) J WALL THICKNESS MIN. MAX. L .010 (0.3) 70 M .012 (0.3) N +.000-.1006 (+0.00-0.15) P .007 (0.2) .441 .094 .205 1.425 .965 .717 .157 (11.2) (2.4) (5.2) (36.2) (24.5) (18.2) (4.0) R .016 (0.4) S .12 (0.3) (27.0) (31.8) 1.062 1.252 .575 .094 .295 1.531 1.055 .969 .189 1.312 1.626 (14.6) (2.4) (7.5) (38.9) (26.8) (24.6) (4.8) (33.3) (41.3) .618 .094 .295 1.531 1.055 1.079 .189 1.500 1.748 (15.7) (2.4) (7.5) (38.9) (26.8) (27.4) (4.8) (38.1) (44.4) .618 .094 .295 1.909 1.264 1.079 .189 1.500 1.748 (15.7) (2.4) (7.5) (48.5) (32.1) (27.4) (4.8) (38.1) (44.4) .661 .094 .354 1.941 1.327 1.213 .189 1.562 1.874 (16.8) (2.4) (9.0) (49.3) (33.7) (30.8) (4.8) (39.7) (47.6) .709 .094 .358 1.941 1.327 1.346 .189 1.750 2.000 (18.0) (2.4) (9.1) (49.3) (33.7) (34.2) (4.8) (44.5) (50.8) .795 .094 .358 1.941 1.327 1.472 .189 2.000 2.134 (20.2) (2.4) (9.1) (49.3) (33.7) (37.4) (4.8) (50.8) (54.2) .795 .094 .358 1.953 1.327 1.610 .189 2.000 2.252 (20.2) (2.4) (9.1) (49.6) (33.7) (40.9) (4.8) (50.8) (57.2) .886 .094 .394 2.043 1.386 1.839 .220 2.188 2.500 (22.5) (2.4) (10.0) (51.9) (35.2) (46.7) (5.6) (55.6) (63.5) .972 .094 .394 2.043 1.386 2.102 .220 2.438 2.748 (24.7) (2.4) (10.0) (51.9) (35.2) (53.4) (5.6) (61.9) (69.8) 1.059 .094 .327 2.043 1.386 2.346 .220 2.812 3.000 (26.9) (2.4) (8.3) (51.9) (35.2) (59.6) (5.6) (71.4) (76.2) 1.165 .094 .327 2.043 1.386 2.579 .220 2.953 3.248 (29.6) (2.4) (8.3) (51.9) (35.2) (65.5) (5.6) (75.0) (82.5) BB THREAD CLASS 2A .6250-24 UNEF .7500-20 UNEF .8750-20 UNEF .8750-20 UNEF 1.0000-20 UNEF 1.1250-18 UNEF 1.2500-18 UNEF 1.3750-18 UNEF 1.6250-18 UNEF 1.8750-16 UN 2.0625-16 UN 2.3125-16 UN All dimensions in inches (millimeters in parenthesis) 110 For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support * www.peigenesis.com * sales@peigenesis.com PANEL CUTOUTS SHELL SIZE Dim. J-flange in front of panel Dim. K-flange at rear of panel See sealing screws on a page 439. STYLE 0, 2, 20, 30, TB FLANGE G (TP) MOUNTING HOLE DIAMETER H J FRONT K REAR 10SL 0.717 (18.2) 0.126 (3.2) 0.688 (17.5) 0.750 (19.1) 14S 0.906 (23.0) 0.126 (3.2) 0.813 (20.7) 1.000 (25.4) 16S 0.969 (24.6) 0.126 (3.2) 0.938 (23.8) 1.125 (28.6) 16 0.969 (24.6) 0.126 (3.2) 0.938 (23.8) 1.125 (28.6) 18 1.063 (27.0) 0.126 (3.2) 1.063 (27.0) 1.250 (26.7) 20 1.157 (29.4) 0.126 (3.2) 1.188 (30.2) 1.375 (35.0) 22 1.252 (31.8) 0.126 (3.2) 1.313 (33.4) 1.500 (38.1) 24 1.374 (34.9) 0.146 (3.7) 1.438 (36.5) 1.625 (41.3) 28 1.563 (39.7) 0.146 (3.7) 1.688 (42.9) 1.875 (47.6) 32 1.752 (44.5) 0.169 (4.3) 1.938 (49.2) 2.125 (54.0) 36 1.937 (49.2) 0.169 (4.3) 2.125 (54.0) 2.375 (60.3) 40 2.185 (55.5) 0.169 (4.3) 2.375 (60.3) 2.625 (66.7) SHELL SIZE D 7/70 PANEL CUTOUT F - FLAT D - DIAMETER 10SL 0.830 (21.1) 0.875 (22.2) 14S 1.080 (27.4) 1.125 (28.6) 16S/16 1.210 (30.7) 1.250 (31.7) 18 1.320 (33.5) 1.375 (34.9) 20 1.450 (36.8) 1.500 (38.1) 22 1.570 (39.9) 1.625 (41.3) 24 1.700 (43.2) 1.750 (44.5) 28 1.950 (49.5) 2.000 (50.8) 32 2.200 (55.9) 2.250 (57.2) 36 2.450 (62.2) 2.500 (63.5) 40 2.700 (68.6) 2.750 (69.9) 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 DIMENSIONS PANEL THICKNESS Rear Mount SHELL SIZE REAR MOUNT 10SL .303 (7.70) 14S .303 (7.70) 16S .303 (7.70) 16 .242 (6.15) 18 .303 (7.70) 20 .303 (7.70) 22 .303 (7.70) 24 .303 (7.70) 28 .343 (8.70) 32 .309 (7.85) 36 .309 (7.85) 40 .309 (7.85) All dimensions in inches (millimeters in parenthesis) For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 111 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 ACCESSORIES MS3057-A CABLE CLAMP Standard MS3057 cable clamps have dual-clamping action to provide a balanced, positive hold on the wires and greatly reduce moisture transmission. This cable clamp accepts MS3420 bushings. MS3420 bushings can be nested to reduce the inside diameter to more closely match the diameter of the cable or wire bundle. SHELL SIZE THREAD CLASS 2B 10SL 5/8-24UNEF 14S 3/4-20UNEF 16/16S 7/8-20UNEF 18 20/22 24/28 1-20UNEF LOW-COST CAST ZINC 97-3057-1004** 97-3057-1007** 97-3057-1008** 97-3057-1010** 1 3/16-18UNEF 97-3057-1012** 1 7/16-18UNEF 97-3057-1016** 97-3057-1020** 32 1 3/4-18UNS 36 2-18UNS 97-3057-1024** 40 2 1/4-16UNS - STANDARD CLAMP AND TELESCOPIC BUSHING STANDARD CLAMP ALUMINUM W/ MAXIMUM LOW-COST ALUMINUM W/ STAINLESS STEEL CABLE DIAMETER ZINC WITH BUSHING BUSHING ID BRASS SCREWS SCREWS INCH (MM) BUSHING INCLUDED INCH (MM) MS3057-4A M85049/41-4A 0.312 (7.92) 97-3057-1004-1 MS3420-4 MS3057-6A M85049/41-6A 0.438 (11.10) 97-3057-1007-1 MS3420-6 0.312 (7.9) MS3057-8A M85049/41-8A 0.562 (14.27) 97-3057-1008-1 MS3420-8 0.437 (11.1) MS3057-10A M85049/41-10A 0.625 (15.88) 97-3057-1010-1 MS3420-10 0.562 (14.3) MS3057-12A M85049/41-12A 0.750 (19.05) 97-3057-1012-1 MS3420-12 0.625 (15.9) MS3057-16A M85049/41-16A 0.938 (23.80) 97-3057-1016-1 MS3420-16, -12 0.625 (15.9) MS3057-20A M85049/41-20A 1.250 (31.75) 97-3057-1020-1 MS3420-20, -16 0.750 (19.1) MS3057-24A M85049/41-24A 1.375 (34.92) 97-3057-1024-1 MS3420-24, -20 0.937 (23.8) MS3057-28A M85049/41-28A 1.625 (41.28) - ** Other platings are available. 0.220 (5.6) - - a See page 17 for alternate platings. MS3057-C WATERPROOF CABLE CLAMP Standard MS3057-C waterproof cable clamp with mechanical strain relief for use with styles F, L and T endbells. Internal neoprene gland and compression ring will seal a broad range of round cable diameters as listed below. For reduction of cable diameters, order the appropriate MS3420A bushing in table. SHELL SIZE PART NUMBER WIRE DIAMETER INCHES (MM) MAX. MIN. OPTIONAL BUSHINGS PART NUMBER MAX. WIRE DIA. (MM) 10SL MS3057-4C 0.312 (7.93) 0.188 (4.80) MS3420-4A 0.219 (5.56) 14S MS3057-6C 0.438 (11.12) 0.281 (7.10) MS3420-6A 0.312 (7.93) MS3420-4A 16/16S MS3057-8C 0.530 (13.48) 0.312 (7.90) MS3420-8A MS3420-6A 18 MS3057-10C 0.625 (15.87) 0.375 (9.50) MS3420-10A MS3420-6A 20/22 MS3420-8A 0.438 (11.10) MS3420-16A 0.750 (19.00) MS3420-12A 0.540 (13.74) MS3420-8A 0.438 (11.10) 32 0.938 (23.80) MS3420-16A 0.750 (19.00) MS3420-12A 0.540 (13.74) MS3057-24C 1.25 (31.75) 0.625 (15.90) MS3420-20A 36 MS3057-20C 0.940 (23.8) 0.500 (12.70) 0.312 (7.93) 0.540 (13.74) MS3057-16C 0.750 (19.00) 0.312 (7.93) 0.438 (11.10) MS3420-12A 24/28 MS3057-12C 0.219 (5.56) 0.438 (11.10) 1.38 (35.00) 0.921 (23.40) 1.00 (25.40) MS3420-24A 1.12 (28.5) MS3420-18A 0.938 (23.80) MS3420-16A 0.750 (19.00) 40 MS3057-28C 1.62 (41.25) 1.25 (31.80) MS3420-28A 1.25 (31.75) MS3420-20A 0.940 (23.80) MS3420-16A 0.750 (19.00) All dimensions in inches (millimeters in parenthesis) 112 For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support * www.peigenesis.com * sales@peigenesis.com MS3420 TELESCOPING BUSHINGS For use with style-A cable clamps and AIT/MS style-E/F endbells to resist dust, dirt and oil. Bushings can be nested, one inside the other, to reduce the inside diameter and form a better seal against the cable jacket. Each bushing will accept the next smallest bushing. SIZE 1ST BUSHING PART NUMBER INSIDE DIAMETER 2ND NESTED BUSHING INSIDE DIAMETER FITS IN CABLE CLAMP 10SL MS3420-4 .220 (5.59) NONE - MS3057-4A 14S MS3420-6 .312 (7.92) NONE - MS3057-6A 16S MS3420-8 .437 (11.10) NONE - MS3057-8A 16 MS3420-8 .437 (11.10) NONE - MS3057-8A 18 MS3420-10 .562 (14.30) NONE - MS3057-10A 20 MS3420-12 .625 (15.90) NONE - MS3057-12A 22 MS3420-12 .625 (15.90) NONE - MS3057-12A 24 MS3420-16 .750 (19.05) MS3420-12 .625 (15.90) MS3057-16A 28 MS3420-16 .750 (19.05) MS3420-12 .625 (15.90) MS3057-16A 32 MS3420-20 .937 (23.80) MS3420-16 .750 (19.05) MS3057-20A 36 MS3420-24 1.250 (31.75) MS3420-20 .937 (23.80) MS3057-24A 40 MS3420-28 1.375 (34.92) MS3420-24 1.250 (31.75) SE96-28A4 MS3420-A REDUCTION BUSHINGS 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 ACCESSORIES For use with MS3057-C cable clamps (style-C) to reduce the wire sealing diameter. Bushings can be nested, one inside the other, to progressively reduce the inside diameter of the cable clamp. The column labeled "reduction bushings" shows the acceptable nesting options for each clamp. 9767 CABLE CLAMPS 9767 waterproof cable clamp with mechanical strain relief. An internal neoprene gland seal bushing and compression washer will seal a broad range of round cable diameters, as listed below. MAX. CABLE OD MIN. CABLE OD THREAD CLASS 2B CABLE CLAMP PART NUMBER INCHES (mm) INCHES 0.020 (0.51) 5/8-24 UNEF 14S 9767-14-4 0.219 (5.55) 0.020 (0.51) 3/4-20 UNEF 14S 9767-14-6 0.344 (8.73) 0.176 (4.47) 3/4-20 UNEF 16S/16 9767-16-4 0.219 (5.55) 0.020 (0.51) 7/8-20 UNEF 16S/16 9767-16-6 0.344 (8.73) 0.176 (4.47) 7/8-20 UNEF 16S/16 9767-16-8 0.438 (11.12) 0.177 (4.50) 7/8-20 UNEF 18 9767-18-6 0.344 (8.73) 0.176 (4.47) 1-20 UNEF 18 9767-18-8 0.438 (11.12) 0.177 (4.50) 1-20 UNEF SHELL SIZE 10SL 9767-12-4 0.219 (5.55) (mm) 18 9767-18-10 0.563 (14.29) 0.292 (7.42) 1-20 UNEF 20/22 9767-22-8 0.438 (11.12) 0.177 (4.50) 1-3/16-18 UNEF 20/22 9767-22-10 0.563 (14.29) 0.292 (7.42) 1-3/16-18 UNEF 20/22 9767-22-12 0.688 (17.46) 0.370 (9.40) 1-3/16-18 UNEF 24/28 9767-28-10 0.563 (14.29) 0.292 (7.42) 1-7/16-18 UNEF 24/28 9767-28-12 0.688 (17.46) 0.370 (9.40) 1-7/16-18 UNEF 24/28 9767-28-16 0.844 (21.43) 0.536 (13.61) 1-7/16-18 UNEF 32 9767-32-20 1.031 (26.19) 0.590 (14.99) 1-3/4-18 UNS 36 9767-36-16 0.844 (21.43) 0.536 (13.61) 2-18 UNS All dimensions in inches (millimeters in parenthesis) For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 113 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 ACCESSORIES GASKETS Synthetic rubber gaskets are used to ensure a moisture-tight seal between a receptacle and the panel. Gaskets are available for front or rear-panel mounting of styles 0, 2, 20, 30 and TB connectors. Gasket thickness is approximately .031 inches (1 mm), for nonconductive and low-temperature types. Conductive shielding gaskets contain an embedded metal screen for EMI/RFI shielding in addition to moisture sealing. Gaskets are available for front or rear-panel mounting of styles 30 and TB connectors. Gasket thickness is .020 inches (.5 mm). REAR MOUNT FRONT MOUNT SHELL SIZE NON-CONDUCTIVE CONDUCTIVE 10SL 10-040450-010 10-040450-10S 10-036675-010 10-580649-011 14S 10-040450-014 10-040450-14S 10-036675-014 10-580649-014 16S 10-040450-016 10-040450-16S 10-036675-016 10-580649-016 16 10-040450-016 10-040450-16S 10-036675-016 10-580649-016 18 10-040450-018 10-040450-18S 10-036675-018 10-580649-018 20 10-040450-020 10-040450-20S 10-036675-020 10-580649-020 22 10-040450-022 10-040450-22S 10-036675-022 10-580649-022 24 10-040450-024 10-040450-24S 10-036675-024 10-580649-024 28 10-040450-028 10-040450-28S 10-036675-028 10-580649-028 32 10-040450-032 10-040450-32S 10-036675-032 10-580649-032 36 10-040450-036 10-040450-36S 10-036675-036 10-580649-036 40 10-040450-040 10-040450-40S 10-036675-040 10-580649-040 LOW-TEMPERATURE NON-CONDUCTIVE METAL DUST CAPS WITH SASH CHAIN Metal dust caps are used to protect the contacts when the connectors are left unmated. Dust caps come with metal chain lanyards. Dummy Receptacles are for front or rear-panel mounting. AIB/GT Series connectors have bayonet ramps. The center of the connector is closed. Dummy receptacles mount on the same centers and have the same outside dimensions as a STYLE 2 receptacle. A version with a clearance hole through the middle of the connector is also available. Contact us for ordering information. DUST CAPS PLUG CAP RECEPTACLE DUMMY RECEPTACLES PLUG SEAL RING 1,8 0,2 D9 SHELL SIZE 3 0,2 10SL 10-580903-11* 10-580902-11* 10-580595-11* 10-564843-101 14S 10-580903-14* 10-580902-14* 10-580595-14* 10-564843-141 16S 10-580903-16* 10-580902-16* 10-580595-16* 10-564843-161 16 10-580903-17* 10-580902-17* 10-580595-17* 10-564843-161 18 10-580903-18* 10-580902-18* 10-580595-18* 10-564843-181 20 10-580903-20* 10-580902-20* 10-580595-20* 10-564843-201 22 10-580903-22* 10-580902-22* 10-580595-22* 10-564843-221 24 10-580903-24* 10-580902-24* 10-580595-24* 10-564843-241 28 10-580903-28* 10-580902-28* 10-580595-28* 10-564843-281 32 10-580903-32* 10-580902-32* 10-580595-32* 10-564843-321 36 10-580903-36* 10-580902-36* 10-580595-36* 10-564843-161 40 10-580903-40* 10-580902-40* 10-580595-40* 10-564843-401 *Select code for plating: Z = Black anodize 3 = Olive drab cadmium plate 114 9 = Olive drab cadmium nickel base G = Electroless nickel U = Green zinc Y = Black alloy For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support * www.peigenesis.com * sales@peigenesis.com SOLDER CONTACTS STEP 1: Slide the rear accessories over the wire bundle in the proper sequence for re-assembly: cable clamp and/or endbell first, then ferrule and (if used) coupling nut. STEP 2: Insert individual wires through the proper holes in the grommet. Use isopropyl alcohol as a lubricant. CRIMP TOOL OPERATION STEP 3: Solder wires to appropriate contacts on the rear of the connector. Information on standard soldering practices is available upon request. Please contact us. STEP 4: Fixture the connector for reassembly using the endbell assembly tools on a page 122 STEP 5: Slide the grommet down the wires (lubricating the grommet with isopropyl alcohol will help). STEP 6: Fill all unused grommet cavities with a wire hole filler to maintain the sealing integrity of the connector. STEP 7: Slide coupling nut, ferrule, and endbell accessories over rear of the connector and tighten. For tooling, a see page 122. NOTE: Hand-crimp tools can be used with size 16S, 16 & 12 contacts. Size 8, 4 and 0 contacts require the use of air-powered crimp tools. Contact us for assistance in the use of these tools. LOCATOR LATCH CRIMP TOOL LATCH LOCATOR LOCATOR COLOR CODE 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 ASSEMBLY INSTRUCTIONS INDEX MARK TURRET STEP 1: Strip the wires to the appropriate length. See strip lengths on the Contact Selection Guide,a see page 94. STEP 2: Open the crimp tool by squeezing the handles. Push the latch on the turret to pop up the locator. Attach the turret to the crimp tool using the two captive hex bolts in the turret. STEP 3: Select the proper locator position for your contact by rotating the locator until the proper color is aligned with the index mark. Push locator back down until it snaps into position. CONTACT SIZE PIN LOCATOR COLOR SOCKET LOCATOR COLOR 16 Blue Green 12 Green Green 16S Red Red DIAL LOCK PIN STEP 4: Adjust dial for proper wire gauge. To change the dial setting, remove the lock pin and lift center of dial. Turn to the desired wire gauge. Replace lock pin on dial. STEP 5: Cycle the tool before inserting the contact to be sure the tool is in the open position. Drop the contact, mating end first, into the crimp cavity of the tool. Squeeze the tool handle just enough to grip the contact without actually crimping it. STEP 6: Insert the stripped wire into the contact with a slight twisting motion. Be sure all wire strands are inside the contact. Squeeze the handle to cycle the tool. The handle will not release until the contact is completely crimped. For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 115 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 ASSEMBLY INSTRUCTIONS CRIMP TENSILE STRENGTH CRIMP TOOL OPERATION (CONTINUED) Initial minimum pullout force in lbs. (before conditioning) CHECK TO BE SURE CONDUCTOR IS VISIBLE THROUGH WIRE INSPECTION HOLE CRIMP WIRE INSULATION SHOULD PRESS UP AGAINST THE END OF THE CONTACT. SIZE WIRE GAUGE LB. 16 20 20 18 40 16 50 12 14 70 12 110 8 8 185 4 4 450 0 0 800 STEP 7: Remove the crimped contact. Pull on the wire slightly to be sure it is properly crimped. Be sure the contact is not bent or damaged in any way. Visually inspect the crimp. MICRO-SECTIONS: Enlargement of micro-section permits a final inspection of crimp quality. This test is recommended whenever new tools or new types of wire or contacts are used. INSERTION OF CONTACTS GUIDE (PILOT) PIN INSERTION TOOL SHOULDER STEP 1: Slide the rear accessories over the wire bundle in the proper sequence for re-assembly: cable clamp and/or endbell first, then ferrule, and coupling nut. STEP 2: Use the proper insertion tool from the Contact Selection Chart on a page 94 Place the contact in the tool. The tool should press against the shoulder of the contact. Contact sizes 16S, 16, and 12 use a pliers-style tool. Contact sizes 8, 4 and 0 use a tool with a C-shaped shaft. STEP 3: Lubricate the grommet with isopropyl alcohol (do not use any lubricant other than isopropyl alcohol). Insert the contact through the appropriate cavity in the grommet. Sizes 16S, 16 and 12 socket contacts must be installed using guide (pilot) pins. See the Contact Selection Guide on a page 94 for Insertion Guide (Pilot) Pin part numbers. CONNECTOR ASSEMBLY FIXTURE STEP 4: Place the connector into an assembly fixture (fixtures are available for production use, contact us.) If you are not using a fixture, be sure to allow clearance on the mating face of the connector for the guide pins to come through the connector during insertion. 116 STEP 5: Lubricate the contact cavities of the connector insulator with isopropyl alcohol (do not use any other type of lubricant). STEP 6: Using guide pins where necessary, push straight down with a firm even pressure until the contact snaps into position in the proper cavity. Start at the center of the pattern and work toward the outer edges. For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support * www.peigenesis.com * sales@peigenesis.com INSERTION OF CONTACTS (CONTINUED) UNCRIMPED CONTACTS STEP 7: Fill any unused cavities with contacts. STEP 8: Check the mating face of the connector to ensure that all the same size contacts are on the same plane (fully inserted). If not, the contact is not fully inserted. Remove the contact using the proper extraction tool and procedure and reinsert. Do not attempt to reinsert the insertion tool to correct the problem. STEP 9: A wire hole filler must be inserted into the grommet behind the unused contacts to maintain the sealing integrity of the connector. See the Contact Selection Chart on a page 94 for wire hole fillers. STEP 10: Place the connector back in the fixture for re-assembly. Slide the connector accessories back down the cable over the rear of the connector and tighten. Use the appropriate endbell tools as shown on a page 122. EXTRACTION OF CONTACTS 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 ASSEMBLY INSTRUCTIONS SOCKET EXTRACTION END SOFT JAW PLIERS LOCK RING HANDLE PIN EXTRACTION END STEP 1: Remove the endbell accessories and slide them back over the wires. Use the appropriate endbell tools as shown on a page 122. CROSS SECTION OF CONNECTOR PIN CONTACT STEP 2: Use the proper extraction tool from the Contact Selection Chart on a page 94. The extraction tool can be used for both pin and socket contacts by removing the shaft from the handle and reversing it for pin or socket extraction. CROSS SECTION OF CONNECTOR SOCKET CONTACT STEP 3: On the mating face of the connector, insert the tool over the pin contact or into the socket contact until the tool bottoms. Apply a slow continuous pressure to push the contact out the rear of the connector. When the shoulder of the tool "thunks" against the insulator, the contact is extracted. STEP 4: Carefully remove the extraction tool from the connector to avoid damage to the insulator. For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 117 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 AMPHENOL HOW-TO-ORDER GUIDE AIB/GT SERIES CONNECTORS GT C 00 A 36-5 P W- (002) SERIES Omit for standard olive drab with silver plated contacts G96 Black anodized 014 Olive drab cadmium plate, nickel base A24 Gold/nickel-plated contacts 023 Electroless nickel (RoHS with crimp only) 025 Black alloy (RoHS with crimp only) 027 Conductive black alloy (RoHS with crimp only) 024 Green zinc B30 Gold RDS Radsok power contacts 8, 4 & 0 socket contact only 116Less pre-tinned solder cups 472 116 & 025 mod codes (RoHS) 548116 & 023 mod codes (RoHS) 553116 & 027 mod codes (RoHS) GT Circular connectors with bayonet coupling CONTACT STYLE/INSERT C = S = CY = SY = CL = SL = Crimp Solder Crimp with Viton(R)* Solder with Viton(R)* Crimp with low-smoke/flameretardant inserts Solder with low-smoke/flameretardant inserts ALTERNATE INSERT ROTATION SHELL STYLE 00 01 02 020 030 05 06 062 064 065 07 070 08 TB Wall-mount receptacle Inline receptacle Box-mount receptacle Box-mount receptacle with accessory threads Square flange receptacle rear panel mount (most popular) Dummy receptacle Straight plug (most popular) Straight plug with deep-serrated coupling nut Panel-mounted plug with heavy-duty coupling nut Straight plug with long heavy-duty coupling nut Jam nut receptacle - rear panel mount Jam nut receptacle with accessory threads 90 angle plug Thru-bulkhead MATEABILITY WITH IDENTICAL CONTACT ARRANGEMENTS CONNECTOR STYLE MATEABLE WITH STYLE GT00 GT06/062/064/065/08 GT01 GT06/062/064/065/08 GT02 GT06/062/064/065/08 GT020 GT06/062/064/065/08 GT030 GT06/062/064/065/08 GT06/062/064/065 GT00/01/02/020/03/030/05/070/TB GT07/070 GT06/062/064/065/08 GT08 GT00/01/02/020/03/030/05/070/TB GTTB GT06/062/064/065/08 *Viton(R) is a registered trademark of DuPont DOW Elastomers 118 CONNECTOR SHELL VARIATIONS W, X, Y, and Z designate that the insert is rotated in its shell from a normal position. No letter required for normal (no rotation) position. See a pages 83-93. CONTACT STYLE P pin contacts S socket contacts SHELL SIZE & LAYOUT See a pages 72-82. CONNECTOR CLASS AGeneral-duty, threaded backshell, no cable clamp, no grommet AF General-duty, threaded backshell, cable clamp, no grommet F General-duty, threaded backshell, cable clamp, with grommet CFGeneral-duty, threaded endbell, gland-seal cable clamp, no grommet CFZGeneral-duty, threaded endbell, gland-seal cable clamp, with grommet GOne-piece, heat shrink endbell adaptor, with grommet (use with heat shrink boot - see Accessories). a pages 440-441 G2 Two-piece, heat shrink endbell adaptor, with grommet (use with heat shrink boot - see Accessories). a pages 440-441 LCLong-threaded backshell, gland-seal cable clamp, with grommet, and basket-weave cord grip (please call with cable O.D.) LCF Long-threaded endbell, gland-seal cable clamp, no grommet LCFZ Long-threaded endbell, gland-seal cable clamp, with grommet RGeneral-duty, threaded backshell, no cable clamp, with grommet RVGeneral-duty, short backshell, with grommet (may be used with heat shrink boot - see Accessories). a pages 440-441 CFGGGeneral-duty, threaded endbell, gland-seal cable clamp, no grommet, rubber-covered coupling nut (shell styles 06 and 08 only) PP Panel plug, only for shell styles 06 and 064 LTLong back shell for metal core conduit, with grommet (please call with conduit O.D.) PFCFor plastic, flexible conduit (please call with conduit O.D.) a see pages 445 SLLong backshell for use with PG gland-seal style cord grip (please call with cable O.D.) For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support * www.peigenesis.com * sales@peigenesis.com AIBC/ACA-B SERIES CONNECTORS To more easily illustrate ordering procedure, part number ACA3106E181SXB-F80 is shown as follows: ACA 3106 E 18 1 S X B - F80 CONNECTOR MODIFICATION SERIES ACA Circular Connector Family SHELL STYLES 3100 - Wall-mount receptacle with rear accessory threads for front mounting through holes in flange 3101 - Cable-connecting receptacle with rear accessory threads 3102 - Front-mount box receptacle no rear accessory threads through holes in flange 3103 - Rear-mount box receptacle with rear accessory threads through holes in flange 3106 - Plug straight 3107A - Jam nut receptacle rear mount, no rear accessory threads 3108 - Plug with 90 degree endbell CONNECTOR CLASS EEnvironmental with resilient insulator and endbell with clamp and bushing FEnvironmental with resilient insulator and endbell with rear accessory threads GTwo-piece backshell for heat shrink boots REnvironmental with resilient insulator and shortened lightweight endbell without cable clamp SHELL SIZE 01 - Metric crimp contacts 116 - Less solder filled contacts F80 - AWG crimp contacts A176 - Gold-plated contacts A23 - Electroless nickel plating shells A232 - Black zinc cobalt-plated shells F42 - Less grommet, endbell & sleeve (ferrule) F0 - Less contacts (ordered separately) RFI - Grounding spring on barrel (3106 & 3108) T00 - Metric threaded holes in flange (3100, 3102, 3103 only) Contact us for other modifications REVERSE BAYONET COUPLING ALTERNATE ROTATION W, X, Y, and Z No suffix required for normal position a See pages 83-93 for valid alternate insert position (rotation) 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 AMPHEN OL HOW-TO-ORDER GUIDE CONTACT TYPE P - Pin S - Socket CONNECTOR ARRANGEMENT a See pages 72-82 for layouts by number of contacts 10SL, 14S, 16S, 16, 18, 20, 22, 24, 28, 32, and 36 MATEABILITY WITH IDENTICAL CONTACT ARRANGEMENTS CONNECTOR STYLE MATEABLE WITH STYLE ACA 3100 ACA3106/ ACA3108 ACA 3101 ACA3106/ ACA3108 ACA 3102 ACA3106/ ACA3108 ACA 3103 ACA3106/ ACA3108 ACA 3105 ACA3106/ ACA3108 ACA 3106 ACA3101/ ACA3102/ ACA3103 ACA 3108 ACA3101/ ACA3102/ ACA3103 Use the AIB/GT Series part numbering system on a pages 70-71 whenever possible. For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 119 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 AMPHENOL HOW TO ORDER GUIDE VG95234 NATO SPECIFICATIONS VG95234- A 20-29 P 1 N VG SPEC PREFIX SHELL STYLE See chart below SHELL SIZE - LAYOUT a See pages 72-82. CONTACT STYLE P = Pin contacts S = Socket contacts TERMINATION 1 = AWG crimp Blank = metric crimp POLARIZATION a See pages 83-93. SHELL STYLE PLUGS Mates with D E E1 G H K L M R1 T Straight plug with cable clamp Right angle plug with cable clamp Right angle plug for conduit termination Straight plug with heat shrink endbell Straight plug for conduit termination Right angle plug for conduit termination with grounding fingers Straight plug for conduit termination with grounding fingers Straight plug with shielded heat shrink endbell and grounding fingers Straight plug with shielded heat shrink endbell and grounding fingers Straight plug with heat shrink endbell and grounding fingers RECEPTACLES A B1 B2 F J1 J2 N1 N2 S1 S2 U1 U2 V 120 Front panel mount box receptacle Rear panel mount box receptacle, metric mounting holes Rear panel mount box receptacle, through mounting holes In-line receptacle with cable clamp Rear panel mount wall receptacle with cable clamp, metric mounting holes Rear panel mount wall receptacle with cable clamp, through mounting holes Rear panel mount wall receptacle with shielded heat shrink endbell, metric mounting holes Rear panel mount wall receptacle with shielded heat shrink endbell, through mounting holes Rear panel mount wall receptacle with heat shrink endbell, metric mounting holes Rear panel mount wall receptacle with heat shrink endbell, through mounting holes Rear panel mount wall receptacle with heat shrink endbell, metric mounting holes Rear panel mount wall receptacle with heat shrink endbell, through mounting holes In-Line receptacle with conduit termination For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support * www.peigenesis.com * sales@peigenesis.com VG95234 SHELL STYLES VG95234 STYLE A VG95234 STYLE B1/B2 VG95234 STYLE D VG95234 STYLE E VG95234 STYLE F VG95234 STYLE G VG95234 STYLE H VG95234 STYLE J1/J2 VG95234 STYLE K VG95234 STYLE L VG95234 STYLE M VG95234 STYLE N1/N2 VG95234 STYLE R1 VG95234 STYLE S1/S2 VG95234 STYLE T VG95234 STYLE U1/U2 For assistance in Europe, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 AMPHENOL HOW TO ORDER GUIDE 121 5015 - AMPHENOL AIB/GT SERIES MIL-DTL-5015 CONNECTOR TOOLS TG69P NON-MARRING ADJUSTABLE ENDBELL PLIERS FOR FIELD SERVICE TG70 STRAP WRENCH The strap wrench is used to connect or disconnect coupling nuts in a confined space, or to tighten or loosen endbells without damaging the connector plating. A strap wrench also increases torque, allowing you to more easily mate or unmate a connector pair. Substitute tools, such as a pipe wrench or pliers, should never be used because of the high probability of severe damage to the connector plating or the coupling mechanism. The TG69P pliers have resilient jaws and are used to tighten or remove endbells without damaging the connector plating. The pliers are adjustable and will accommodate all of the connector sizes in this catalog. Substitute tools, such as a pipe wrench or metal jaw pliers, should never be used due to the high probability of severe damage to the connector plating. Replacement jaws, Part No. G77015, are available. Plug and Receptacle Holders The 600 Series is a complete system for the proper assembly and torquing of connector endbells. The system includes a bench-mounted or hand-held torque wrench, plug and receptacle holders, and a range of endbell tightening tools. When used together, these tools provide the user with consistent endbell installations. Each item is shipped with detailed assembly instructions. 600B005-R MIL-DTL-5015 SIZE 8/8S 600-007 Bench-mounted torque wrench 600-004 Hand-held torque wrench TORQUE VALUES IMPORTANT NOTE: If barrel/shell has three threads or less, torque to 30 to 35 inch/Lbs (3.4 to 4.0 NM) per L-725-2. 122 600B005-P FOR AIT/MS & AIB/GT RECEPTACLES PLUGS 600B005-8R 600B005-8P 10S/SL 600B005-10R 600B005-10P 12/12S 600B005-12R 600B005-12P 14/14S 600B005-14R 600B005-14P 16/16S 600B005-16R 600B005-16P 18 600B005-18R 600B005-18P 20 600B005-20R 600B005-20P 22 600B005-22R 600B005-22P 24 600B005-24R 600B005-24P 28 600B005-28R 600B005-28P 32 600B005-32R 600B005-32P 36 600B005-36R 600B005-36P SIZE IN./LB. MAX. 10SL ROTATIONS 26 PIN SOCKET 44 W=G W=H 50 X=I X=J 16S 50 Y=K Y=L 18 55 Z=M Z=N 20 65 22 85 14S 16 24 90 28 114 32 120 36 153 40 170 For assistance in North America: +1 800.642.8750 for Pricing/Delivery or +1 800.523.0727 Tech Support * www.peigenesis.com * sales@peigenesis.com