10HV33N303J - Kemet - Product.Network

F-3113 5/06

Ceramic High Voltage, High

Temperature Capacitors

KEMET Series Page

Performance Information 1-4

High Temperature, High Voltage

Axial/Radial HT/HP 5-7

High Temperature, High Voltage

Radial HV 8-9

High Voltage Conformally Coated

Radial HV 10-14

High Voltage MIL-PRF-49467 (Equivalent) HV 15-17

High Voltage Space Quality HS 18-22

High Voltage Ceramic Chip 1515/1812/1825/2020/

2225/2520/3333//3530

4040/4540/5440/5550/6560 23-27

High Voltage L & J Leaded SM20/SM21/SM22/SM23

SM24/SM25/SM26/SM30/

SM31/SM33/SM34/SM35/SM36 28-32

High Voltage Disc D30/40/50/75/90/100/120 33-34

High Voltage Disc Multiplie Stacks D30/40/50/75/90/100/120 35

CERAMIC HIGH VOLTS

& TEMPERATURE

CERAMIC HIGH VOLTAGE,

HIGH TEMPERATURE CAPACITORS

1

GENERAL SPECIFICATIONS

Working Voltage:

C0G 50, 100, 200, 500, 1k, 2k, 3k, 4k, 5k, 7.5k, 10k,

15k, 20k

X7R 50, 100, 200, 500, 1k, 2k, 3k, 4k, 5k, 7.5k, 10k, 15k,

20k, 30k, 40k, 50k

X5U 3k, 4k, 5k, 7.5k, 10k, 15k, 20k

Temperature Characteristics:

C0G 0 + 30 PPM / °C from - 55°C to + 125°C (1)

X7R + 15% from - 55°C to + 125°C

X5U + 22%, -56% from -55°C to + 85°C

Capacitance Tolerance:

C0G +0.5pF, +1%, +2%, +5%, +10%

X7R +10%, +20%, +80% / -20%, +100% / -0%

X5U +10%, +20%, +80% / -20%, +100% / -0%

Construction:

Epoxy encapsulated - meets flame test requirements

of UL Standard 94V-0.

High-temperature solder - meets EIA RS-198, Method 302,

Condition B (260°C for 10 seconds)

Termination Material:

Check individual Series: Part Number and Ordering Information

for Termination Materials offered in each series.

Solderability:

MIL-STD 202, Method 208

(Test Method: ANSI/J-STD-002)

Test A for through-hole mount and surface mount leaded.

Test B for surface mount leadless components.

Terminal Strength:

MIL-STD 202, Method 208, Condition A (2.3kg or 5 lbs)

Resistance to Solvents:

MIL-STD 202, Method 215

Resistance to Soldering Heat:

MIL-STD 202, Method 210, Test Condition C

ELECTRICAL

Capacitance @ 25°C:

Within specified tolerance and following test conditions per MIL-

STD 202, Method 305.

C0G, X7R & X5U

> 100pF with 1.0 vrms @ 1 kHz with 1.0 vrms

< 100pF with 1.0 vrms @ 1 MHz with 1.0 vrms

Dissipation Factor @ 25°C:

Same test conditions as capacitance.

C0G - 0.15% maximum

X7R - 2.5% maximum

X5U - 2.5% maximum

Insulation Resistance @25°C:

MIL-STD 202, Method 302

C0G & X7R:

100 gigohm or 1 gigohm x uF, whichever is less.

<500V test @ rated voltage, >1kV test @ 500V.

X5U:

10 gigohm or 100 megohm x uF, whichever is less.

<500V test @ rated voltage, >1kV test @ 500V.

Dielectric Withstanding Voltage:

MIL-STD 202, Method 301

<200V test @ 250% of rated voltage

500V to 1250V test @ 150% of rated voltage

>1251V test @ 120% of rated voltage

ENVIRONMENTAL

Vibration:

MIL-STD 202, Method 204, Condition D (20g)

Shock:

MIL-STD 202, Method 213, Condition I (100g)

Life Test:

MIL-STD 202, Method 108

<200V

C0G - 200% rated voltage @ +125°C

X7R - 200% rated voltage @ +125°C

>500V

C0G - rated voltage @ +125°C

X7R - rated voltage @ +125°C

X5U - rated voltage @ +85°C

Post Test Limits @ 25°C are:

Capacitance Change:

C0G (< 200V) - +3% or 0.25pF, whichever is greater.

C0G (> 500V) - +3% or 0.50pF, whichever is greater.

X7R - + 20% of initial value (2)

Dissipation Factor:

C0G - 0.25% maximum

X7R & X5U - 3.0% maximum

Insulation Resistance:

C0G & X7R:

100 gigohm or 1 gigohm x uF, whichever is less.

<500V test @ rated voltage, >1kV test @ 500V.

X5U:

10 gigohm or 100 megohm x uF, whichever is less.

<500V test @ rated voltage, >1kV test @ 500V.

Moisture Resistance:

MIL-STD 202, Method 106

Post Test Limits @ 25°C are:

Capacitance Change:

C0G (< 200V) - +3% or 0.25pF, whichever is greater.

C0G (> 500V) - +3% or 0.50pF, whichever is greater.

X7R - + 20% of initial value (2)

Dissipation Factor:

C0G - 0.25% maximum

X7R & X5U - 3.0% maximum

Insulation Resistance:

C0G & X7R:

100 gigohm or 1 gigohm x uF, whichever is less.

<500V test @ rated voltage, >1kV test @ 500V.

X5U:

10 gigohm or 100 megohm x uF, whichever is less.

<500V test @ rated voltage, >1kV test @ 500V.

Thermal Shock:

MIL-STD 202, Method 107, Condition A

C0G & X7R: -55°C to 125°C

X5U: -55°C to 85°C

(1) +53 PPM -30 PPM/ °C from +25°C to -55°C, + 60 PPM

below 10pF.

(2) X7R & X5U dielectrics exhibit aging characteristics;

therefore, it is highly recommended that capacitors be

deaged for 2 hours at 150°C and stabilized at room tem-

perature for 48 hours before capacitance measurements

are made.

HIGH TEMPERATURE, HIGH VOLTAGE

PERFORMANCE CHARACTERISTICS

2

HIGH TEMPERATURE HIGH VOLTAGE

MILITARY & AEROSPACE

Avionics

Radar Systems

Telemetry, Data Tx/Rx

Control Systems

MEDICAL

.5 to 1.5 Tesla MR1 &

NM1 Tuning Coils

1 to 3 Tesla MR1 Gradient

Coils & Magnetic Rings

CT-Scanner

Medical MRI

X-Ray Generator

SEMICONDUCTOR

RF Tuning Networks

RF Power Supplies

Semiconductor Manufacturing

SECURITY

Handheld Scanners

Intruder Detection Systems

Luggage Scanners

Metal/Explosive Detector

OTHER

LCD Backlight Inverter

Electric Ballast for CFL

Electric Ballast for Fluorescent Lamp

Measurement Equipment

Microwave/Convection Ovens

POWER SUPPLY

HV Power Supply

Power Station Equipment

Power Supply for Air Conditioner, Washing Machine

Inverter Power Supply-AC

TELECOM

Base Station Power amps

Broadcasting Equipment

MODEM

DAA Modem

xDSL Modem

LAN, Router, HUB, Switches

RF Power Amplifiers

INDUSTRIAL

Oil Rigging, Down Hole, Mining

X

KEMET HIGH VOLTAGE TECHNICAL SUMMARY

3

Radial Conformally

Coated

Std

Mil-PRF-49467

Equivalent

Space Quality

Ceramic Surface Mount

Chip

Military

Leaded Chips

J or L lead

Disc

Disc Stack

C0G/X7R: 500 to

10k VDC

C0G/X7R: 600 to 5k

VDC

C0G/X7R: 500 to

10k VDC

C0G/X7R:

500 to 5k VDC

C0G/X7R:

500 to 10k VDC

C0G/X5U: 3k to

20k VDC,

X7R:3k to 50k VDC

C0G/X7R/X5U: 5k

to 20k VDC

C0G:12 pF - .330µF

X7R: 220 pF - 5.6 µF

C0G: 12 pF - .68 µF

X7R: 27 pF - .47 µF

C0G/X7R: 560 pF -

2.20µF

C0G: 12 pF- .10 µF

X7R: 270 pF -2.50 µF

C0G: 12 pF-.330 µF

X7R: 220 pF-5.6 uF

C0G: 1.2 pF-236 pF

X7R: 10 p -7400 pF

X5U: 80 pF-17300 pF

C0G: 1.2 pF-141 pF

X7R: 37 pF-4400 pF

X5U: 80 pF-10400 pF

C0G: 0.15% max

X7R: 2.5% max

C0G: 0.15% max

X7R: 2.5% max

C0G: 0.15% max

X7R: 2.5% max

C0G: 0.15% max

X7R: 2.5% max

C0G: 0.15% max

X7R: 2.5% max

C0G: 0.15% max

X7R: 2.5% max

X5U: 2.5% max

C0G: 0.15% max

X7R: 2.5% max

X5U: 2.5% max

C0G: -55°C to + 125°C

X7R: -55°C to + 125°C

C0G/X7R: -55°C to + 125°C

X5U: -55°C to + 85°C

C0G/X7R: -55°C to + 125°C

X5U: -55°C to + 85°C

Radial

Chip

Leaded Chip

J or L Lead

Disc

Disc Stack

5

6

7-10

11-13

14-16

17-19

20-21

22-23

24-

25

26-

27

28-

31

32-

33

34-

35

HIGH VOLTAGE

ELECTRICAL ENVIRONMENTAL MECHANICAL CATALOG

Voltage Capacitance Dissipation Operating Configuration See page(s)

Range Range Factor Temperature Range for detail

Hi Temp (HT/HP)

Hi Temp Hi Volt (HV)

Ceramic Cased Capacitor

Std 125°C

(SCR/SRR/SCA/SRA)

200°C

(ACR/ARR/ACA/ARA)

260°C

(TCR/TRR/TCA/TRA)

Hi Temp Hi Volt

(VCR/VRR)

100 to 200 VDC

500 to 4000 VDC

50 to 200 VDC

50 to 100 VDC

500 to 5000 VDC

C0G: 22 pF-.100 µF

X7R:1000 pF-1.0µF

C0G: 390 pF-.015 µF

X7R:1400 pF- .270 µF

C0G: 1.0 pF- .12 µF

X7R:100 pF- 6.8 µF

C0G: 1.0 pF- .12 µF

X7R:100 pF- 3.3 µF

C0G: 1.0 pF- .12 µF

X7R:100 pF- 3.3 µF

C0G: 10 pF-.056 µF

X7R:330 pF-1.2µF

C0G 0.15%

X7R Type 2.0%

X7R 2.50%

C0G 0.15%

X7R Type 2.0%

X7R 2.50%

C0G 0.15%

X7R 2.50%

C0G 0.15%

X7R 2.50%

C0G 0.15%

X7R 2.50%

C0G 0.15%

X7R 2.50%

-55°C to + 200°C

-55°C to + 125°C

-55°C to + 200°C

-55°C to + 260°C

-55°C to + 200°C

Axial/Radial

Radial

Axial/Radial

Radial

HIGH TEMPERATURE

KEMET HIGH VOLTAGE TECHNICAL SUMMARY

4

Features Ultra Stable Semi-Stable Semi-Stable Temp/Volt

High Voltage Hi-Temp Dependent

Dielectric Type C0G (NPO) X7R X7R type X5U

Temperature Coefficient 0 ±30ppm/ºC ±15% +15/-40% +22-56%

Operating Temp. Range -55 to +200ºC -55 to +125ºC -55 to +200ºC -55 to +125ºC

Dissipation Factor 0.1% max. 2.5% max. 2.0% max. 2.5% max.

Aging Rate None -2.0% max/dec. hour -2.0% max/dec. hour -2.0% max/dec. hour

Voltage Range 25 to 20k VDC 50 to 50k VDC 25 to 4k VDC Up to 20K VDC

Standard Tolerance J, K, M K, M, P, Z K, M, P, Z M, P, Z

Coefficient of Thermal 9 X 10-6 IN/IN ºC 11 X 10-6 IN/IN ºC 11 X 10-6 IN/IN ºC 11 X 10-6 IN/IN ºC

Expansion @ 25ºC

DIELECTRIC COMPARISONS

TYPICAL INSULATION RESISTANCE VS. TEMP (C°)

FOR C0G, NPO & X7R DIELECTRICS

10,000.00

1,000.00

100.00

10.00

25 75 225 325275125 175

TEMP (°C)

Ohm-Farads

TECHNICAL SUMMARY

5

NOTE:

Other tolerances, higher capacitance values, voltages,

or special package configurations are available upon

request.

Style Sizes in Inches (mm) max Lead Spacing

±0.030 (S)

Length (L) Height (H) Thickness (W)

HT05 .200 (5.08) .200 (5.08) .100 (2.54) .100 (2.54)

HT55 .200 (5.08) .200 (5.08) .100 (2.54) .200 (5.08)

HT06 .300 (7.62) .300 (7.62) .150 (3.81) .200 (5.08)

HT08 .500 (12.70) .500 (12.70) .250 (6.35) .400 (10.16)

HT09 .700 (17.78) .400 (10.16) .200 (5.08) .500 (12.70)

Style Sizes in Inches (mm) max

Length (L) Diameter (D)

HT11 .170 (4.32) .100 (2.54)

HT13 .260 (6.60) .135 (3.43)

HT14 .400 (10.16) .155 (3.94)

HT15 .500 (12.70) .200 (5.08)

HT16 .750 (19.05) .375 (9.52)

DIMENSIONS

Molded (HT) and Conformal Coated (HP), Radial Lead Types Tubular Case, Axial Lead Types

MARKING

(HT05, HT55, HT11)

472K

KEC

(All other sizes)

HT06AW472K

KEC

Date Code

For CONFORMAL COATED types, change style number to HPXX. HP dimensions will be reduced slightly.

LW

L

H

S

D

1.25

Min.

1.25

Min.

The HT/HP Series is used in robust applications

• Down Hole

• Industrial

• Harsh Environments

Where a Radial/Axial coated capacitor can

withstand high temperatures (200°C).

CAPACITOR OUTLINE DRAWING

PART NUMBER AND ORDERING INFORMATION

CAPACITANCE VALUE

First two digits are significant, last digit is

number of zeros, i.e., 472=4700pF

J=±5%

K=±10%

M=±20%

Other tolerance available upon request

OPTIONAL COPPER LEAD

Solder coated. Add to part

number only if required

STYLE

HT=Molded

HP= Conformal Coated

VOLTAGE

A=25V

B=50V

C=100V

D=200V

DIELECTRIC

MATERIAL

B, W=X7R type

N=C0G (NP0)

HT06 A W 472 K C

TOLERANCE

FEATURES

HIGH TEMPERATURE (+200ºC)

AXIAL/RADIAL CERAMIC CAPACITORS HT/HP SERIES

6

COG & X7R DIELECTRIC

Wmax Wmax

Hmax Hmax

Tmax Tmax

S+.030 S +.030

LeadDia. LeadDia.

Cap 50 100 200 50 100 200 50 100 200 50 100 200 50 100 200 Cap 50 100 200 50 100 200 50 100 200 50 100 200 50 100 200

1.0pF 109 100pF 101

1.2 129 120 121

1.5 159 150 151

1.8 189 180 181

2.2 229 220 221

2.7 279 270 271

3.3 339 330 331

3.9 399 390 391

4.7 479 470 471

5.6 569 560 561

6.8 689 680 681

8.2 829 820 821

10 100 1000 102

12 120 1200 122

15 150 1500 152

18 180 1800 182

22 220 2200 222

27 270 2700 272

33 330 3300 332

39 390 3900 392

47 470 4700 472

56 560 5600 562

68 680 6800 682

82 820 8200 822

100 101 .010uF 103

120 121 .012 123

150 151 .015 153

180 181 .018 183

220 221 .022 223

270 271 .027 273

330 331 .033 333

390 391 .039 393

470 471 .047 473

560 561 .056 563

680 681 .068 683

820 821 .082 823

1000 102 .10 104

1200 122 .12 124

1500 152 .15 154

1800 182 .18 184

2200 222 .22 224

2700 272 .27 274

3300 332 .33 334

3900 392 .39 394

4700 472 .47 474

5600 562 .56 564

6800 682 .68 684

8200 822 .82 824

.010uF 103 1.0 105

.012 123 1.2 125

.015 153 1.5 155

.018 183 1.8 185

.022 223 2.2 225

.027 273 2.7 275

.033 333 3.3 335

.039 393 3.9 395

.047 473 4.7 475

.056 563

.068 683

.082 823

.10 104

.12 124

.15 154

HT/HP

09

HT/HP

08

HT/HP

55

Series

HT/HP

55

HT/HP

05

HT/HP

08

.200(5.08) .300(7.62) .500(12.70)

HT/HP

06

.700(17.78).200(5.08) .300(7.62) .500(12.70)

.200(5.08) .300(7.62) .500(12.70) .200(5.08)

.200(5.08)

.500(12.70)

.200(5.08) .200(5.08)

.100(2.54) .150(3.81)

.400(10.16).300(7.62)

.400(10.16)

.250(6.35)

WVDC

.025(.635)

.200(5.08) .200(5.08) .400(10.16)

.025(.635) .025(.635) .025(.635)

500(12.70)

.025(.635)

WVDCWVDC WVDCWVDC

Cap

Code

.025(.635)

WVDC

Series

WVDC

.250(6.35)

HT/HP

05

.200(5.08)

.100(2.54)

.025(.635) .025(.635)

.200(5.08)

.100(2.54)

.025(.635)

.100(2.54) .150(3.81)

.100(2.54)

.200(5.08)

500(12.70)

.025(.635)

WVDC WVDC

Cap

Code

Radial

X7RC0GRadial

WVDC

HT/HP

06

HT/HP

09

.700(17.78)

.400(10.16)

HIGH TEMPERATURE (+200ºC)

AXIAL/RADIAL CERAMIC CAPACITORS HT/HP SERIES

7

COG & X7R DIELECTRIC

Wmax Wmax

Hmax Hmax

Tmax Tmax

S+.030 S +.030

LeadDia. LeadDia.

Cap

50 100 200 50 100 200 50 100 200 50 100 200 50 100 200

Cap

50 100 200 50 100 200 50 100 200 50 100 200 50 100 200

1.0pF 109 100pF 101

1.2 129 120 121

1.5 159 150 151

1.8 189 180 181

2.2 229 220 221

2.7 279 270 271

3.3 339 330 331

3.9 399 390 391

4.7 479 470 471

5.6 569 560 561

6.8 689 680 681

8.2 829 820 821

10 100 1000 102

12 120 1200 122

15 150 1500 152

18 180 1800 182

22 220 2200 222

27 270 2700 272

33 330 3300 332

39 390 3900 392

47 470 4700 472

56 560 5600 562

68 680 6800 682

82 820 8200 822

100 101 .010uF 103

120 121 .012 123

150 151 .015 153

180 181 .018 183

220 221 .022 223

270 271 .027 273

330 331 .033 333

390 391 .039 393

470 471 .047 473

560 561 .056 563

680 681 .068 683

820 821 .082 823

1000 102 .10 104

1200 122 .12 124

1500 152 .15 154

1800 182 .18 184

2200 222 .22 224

2700 272 .27 274

3300 332 .33 334

3900 392 .39 394

4700 472 .47 474

5600 562 .56 564

6800 682 .68 684

8200 822 .82 824

.010uF 103 1.0 105

.012 123 1.2 125

.015 153 1.5 155

.018 183 1.8 185

.022 223 2.2 225

.027 273 2.7 275

.033 333 3.3 335

.039 393 3.9 395

.047 473 4.7 475

.056 563

.068 683

.082 823

.10 104

.12 124

.15 154

HT/HP09HT/HP08 HT/HP55

Series HT/HP55HT/HP05 HT/HP08

.200(5.08) .300(7.62) .500(12.70)

HT/HP06

.700(17.78).200(5.08) .300(7.62) .500(12.70)

.200(5.08) .300(7.62) .500(12.70) .200(5.08)

.200(5.08)

.500(12.70)

.200(5.08) .200(5.08)

.100(2.54) .150(3.81)

.400(10.16).300(7.62)

.400(10.16)

.250(6.35)

WVDC

.025(.635)

.200(5.08) .200(5.08) .400(10.16)

.025(.635) .025(.635) .025(.635)

500(12.70)

.025(.635)

WVDCWVDC WVDCWVDC

Cap

Code

.025(.635)

WVDC

Series

WVDC

.250(6.35)

HT/HP05

.200(5.08)

.100(2.54)

.025(.635) .025(.635)

.200(5.08)

.100(2.54)

.025(.635)

.100(2.54) .150(3.81)

.100(2.54)

.200(5.08)

500(12.70)

.025(.635)

WVDC WVDC

Cap

Code

Radial X7RC0GRadial

WVDC

HT/HP06 HT/HP09

.700(17.78)

.400(10.16)

HIGH TEMPERATURE (+200ºC)

AXIAL/RADIAL CERAMIC CAPACITORS HT/HP SERIES

8

Style Sizes in Inches (mm) max. Lead Spacing

±0.030 (S)

Length (L) Height (H) Thickness (T)

HV10 .250 (6.35) .220 (5.59) .150 (3.81) .170 (4.32)

HV11 .320 (8.13) .300 (7.62) .250 (6.35) .200 (5.08)

HV12 .420 (10.67) .400 (10.16) .250 (6.35) .300 (7.62)

HV13 .520 (13.21) .500 (12.70) .300 (7.62) .400 (10.16)

HV14 .620 (15.75) .500 (12.70) .300 (7.62) .500 (12.70)

HV15 .720 (18.29) .700 (17.78) .300 (7.62) .600 (15.24)

HV16 .820 (20.83) .700 (17.78) .350 (8.89) .700 (17.78)

DIMENSIONS

LT

H

S

1.25

Min.

NOTE:

Other tolerances, higher capacitance values, voltages, or special

package configurations are available upon request.

MARKING

(HV10, HV11)

472M

KEC

Date Code

(All other sizes)

HV12B472M

1kV

KEC

Date Code

The HV series not only withstands high temperatures

(200°C) , but also offers high voltage (500-4000 VDC)

To be used in robust applications

• Down Hole

• Industrial

• Harsh Environments

PART NUMBER AND ORDERING INFORMATION

CAPACITANCE VALUE

First two digits are significant, last digit is

number of zeros, i.e., 472=4700pF

J=±5%

K=±10%

M=±20%

Other tolerances available upon request

OPTIONAL COPPER LEAD

Solder coated. Add to part

number only if required

STYLE

HV12, etc

VOLTAGE

05=500V

10=1000V

20=2000V

30=3000V

40=4000V

TEMPERATURE

COEFFICIENT

B, W=X7R type

N=C0G (NP0)

10 HV12 B472 K C M

TOLERANCE

FEATURES CAPACITOR OUTLINE DRAWING

GROUP A SCREENING*

Add to part number if required

*MIL-PRF-49467 (Subgroup 1) except Corona

HIGH TEMPERATURE (+200ºC), HIGH VOLTAGE

RADIAL CERAMIC CAPACITORS HV SERIES

9

COG DIELECTRIC

HIGH TEMPERATURE (+200ºC), HIGH VOLTAGE

RADIAL CERAMIC CAPACITORS HV SERIES

10

Style Sizes in Inches (mm) max. Lead Spacing

±0.030 (S)

Length (L) Height (H) Thickness (T)

DIMENSIONS

CAPACITOR OUTLINE DRAWING

MARKING

(HV20, HV21) (All Other Sizes)

103K HV24A103K

1 kV 1 kV

KEC KEC

Date Code Date Code

LT

H

S

1.25

Min.

.025 (22 ga.) solder plated

Cu-clad Steel (CCFE)

HV20 .250 (6.35) .220 (5.59) .200 (5.08) .170 (4.32)

HV21 .320 (8.13) .280 (7.11) .250 (6.35) .220 (5.59)

HV22 .370 (9.40) .300 (7.62) .250 (6.35) .275 (6.98)

HV23 .470 (11.94) .400 (10.16) .270 (6.89) .375 (9.52)

HV24 .570 (14.48) .500 (12.70) .270 (6.89) .475 (12.06)

HV25 .670 (17.02) .600 (15.24) .270 (6.89) .575 (14.60)

HV26 .770 (19.56) .720 (18.29) .270 (6.89) .675 (17.14)

HV30 .450 (11.43) .220 (5.59) .200 (5.08) .300 (7.62)

HV31 .550 (13.97) .280 (7.11) .250 (6.35) .400 (10.16)

HV33 .850 (21.59) .400 (10.16) .270 (6.89) .700 (17.78)

HV34 1.050 (26.67) .500 (12.70) .270 (6.89) .975 (24.76)

HV35 1.250 (31.75) .600 (15.24) .270 (6.89) 1.175 (29.84)

HV36 1.450 (36.83) .720 (18.29) .270 (6.89) 1.375 (34.92)

PART NUMBER AND ORDERING INFORMATION

CAPACITANCE VALUE

First two digits are significant, last digit is

number of zeros, i.e., 102=1000pF

COG

J=±5%

K=±10%

M=±20%

X7R

K=±10%

M=±20%

P=0/+100%

Z= -20/+80%

GROUP A SCREENING

Add to part number only if required MIL-

PRF-49467 (subgroup1) except Corona

VOLTAGE

STYLE

HV23, etc.

DIELECTRIC MATERIAL

N = COG (NPO)

B = X7R

10 HV23 N102 K M

TOLERANCE

05 = 500V

10 = 1000V

20 = 2000V

30 = 3000V

40 = 4000V

50 = 5000V

75 = 7500V

100 = 10000V

Other tolerances available upon request

HIGH VOLTAGE RADIAL CONFORMALLY

COATED CERAMIC CAPACITORS HV SERIES

11

COG DIELECTRIC

HIGH VOLTAGE RADIAL CONFORMALLY

COATED CERAMIC CAPACITORS HV SERIES

12

COG DIELECTRIC

HIGH VOLTAGE RADIAL CONFORMALLY

COATED CERAMIC CAPACITORS HV SERIES

13

X7R DIELECTRIC

HIGH VOLTAGE RADIAL CONFORMALLY

COATED CERAMIC CAPACITORS HV SERIES

14

X7R DIELECTRIC

HIGH VOLTAGE RADIAL CONFORMALLY

COATED CERAMIC CAPACITORS HV SERIES

15

MARKING

(HV60, HV61) (All Other Sizes)

102K HV63R102K

1 kV 1 kV

KEC KEC

Date Code Date Code

PART NUMBER AND ORDERING INFORMATION

1. Electrical characteristics and environmental information on these parts may

be obtained by referring to MIL-PRF-49467.

2. All parts are conformal coated multilayer ceramic.

3. Designed to provide excellent long-term reliability.

4. Parts are Group A screened per MIL-PRF-49467 which includes 100%

Corona testing and meet all other specification requirements.

5. Designed for surface, sea and airborne military and commercial

high-reliability applications.

6. No IR degradation over life.

7. BR (X7R) V/TC is -40% at rated voltage and BZ (X7R) V/TC is -40% at

60% rated voltage.

8. BX characteristic (-25%) on BR parts is approximately 52% rated voltage.

9. 100% Non-destructive test by means of CSAM inspection available.

SLAM available by special order.

Style Sizes in Inches (mm) max. Lead Spacing

±0.030 (S)

Length (L) Height (H) Thickness (W)

HV60 .250 (6.35) .220 (5.59) .200 (5.08) .170 (4.32)

HV61 .320 (8.13) .280 (7.11) .250 (6.35) .220 (5.59)

HV62 .370 (9.40) .300 (7.62) .250 (6.35) .275 (6.98)

HV63 .470 (11.94) .400 (10.16) .270 (6.86) .375 (9.52)

HV64 .570 (14.48) .500 (12.70) .270 (6.86) .475 (12.06)

HV65 .670 (17.02) .600 (15.24) .270 (6.86) .575 (14.60)

HV66 .770 (19.56) .720 (18.29) .270 (6.86) .675 (17.14)

HV68 1.300 (33.02) .600 (15.24) .270 (6.86) 1.175 (29.84)

HV69 1.500 (38.10) .720 (18.29) .270 (6.86) 1.375 (34.92)

DIMENSIONS

LW

H

S

1.25

Min.

.025 (22 ga.) solder plated

Cu-clad Steel (CCFE)

Tolerance

(C0G only) J=±5%

K=±10%

M=±20%

Style

HV60, etc.

Voltage

06 = 600V 40 = 4000V

10 = 1000V 50 = 5000V

20 = 2000V

30 = 3000V

Dielectric

P = BP C0G (NP0)

R = BR (X7R)

Z = BZ (X7R)

C=CSAM

S= SLAM

Add to part number if required.

Capacitance Value

First two digits are significant,

last digit is number of zeros,

i.e., 102=1000pF

10 HV60 R102 K C

CAPACITOR OUTLINE DRAWING

FEATURES

HIGH VOLTAGE MIL-PRF-49467 (EQUIVALENT)

HV SERIES

16

COG DIELECTRIC

HIGH VOLTAGE MIL-PRF-49467 (EQUIVALENT)

HV SERIES

17

X7R DIELECTRIC

HIGH VOLTAGE MIL-PRF-49467 (EQUIVALENT)

HV SERIES

18

MARKING

(HS20, HV21) (All Other Sizes)

103K HS24B103K

1 kV 1 kV

KEC KEC

Date Code Date Code

TOLERANCE

J = ±5% (C0G only)

K = ±10%

M = ±20%

P = 0/+100%

Z = -20%/+80%

INERT LIQUID (BURN-IN)

Std. for >2kV;

Add “F” if required

for 500V or 1kV parts

STYLE

HS24, etc.

VOLTAGE

05 = 500V 40 = 4000V

10 = 1000V 50 = 5000V

20 = 2000V 75 = 7500V

30 = 3000V 100 = 10,000V

DIELECTRIC

B = X7R

N = BP C0G (NP0)

C=CSAM

S=SLAM

Add to part number if

required.

CAPACITANCE VALUE

First two digits are significant,

last digit is number of zeros,

i.e., 103=10000pF

10 HS24 B103 K C F

PART NUMBER AND ORDERING INFORMATION

1. Similar to NASA Spec. SSQ 21113 (1, 2 & 5kV).

2. Conforms to MIL-PRF-49467. (Group A Screening,

Subgroup 1)

3. 100% Corona tested.

4. No IR degradation over life.

5. High density, low DF ceramic.

6. Conservative and proven design is recommended for

non-repairable applications such as spacecraft.

7. CSAM inspections are available and is recommended for

space applications. SLAM available by special order.

8. Burn-in in a non-contaminating inert fluid available.

DIMENSIONS

Style Sizes in Inches (mm) max. Lead Spacing

±0.030 (S)

Length (L) Height (H) Thickness (W)

HS20 .250 (6.35) .220 (5.59) .200 (5.08) .170 (4.32)

HS21 .320 (8.13) .280 (7.11) .250 (6.35) .220 (5.59)

HS22 .370 (9.40) .300 (7.62) .250 (6.35) .275 (6.98)

HS30 .450 (11.43) .220 (5.59) .200 (5.08) .300 (7.62)

HS23 .470 (11.94) .400 (10.16) .270 (6.89) .375 (9.52)

HS31 .550 (13.97) .280 (7.11) .250 (6.35) .400 (10.16)

HS24 .570 (14.48) .500 (12.70) .270 (6.89) .475 (12.06)

HS25 .670 (17.02) .600 (15.24) .270 (6.89) .575 (14.60)

HS26 .770 (19.56) .720 (18.29) .270 (6.89) .675 (17.14)

HS33 .850 (21.59) .400 (10.16) .270 (6.89) .700 (17.78)

HS34 1.050 (26.67) .500 (12.70) .270 (6.89) .975 (24.76)

HS35 1.250 (31.75) .600 (15.24) .270 (6.89) 1.175 (29.84)

HS36 1.450 (36.83) .720 (18.29) .270 (6.89) 1.375 (34.92)

CAPACITOR OUTLINE DRAWING

FEATURES

LW

HIGH VOLTAGE SPACE QUALITY MLC (-55º TO +125ºC)

HS SERIES

19

COG DIELECTRIC

HIGH VOLTAGE SPACE QUALITY MLC (-55º TO +125ºC)

HS SERIES

20

COG DIELECTRIC

HIGH VOLTAGE SPACE QUALITY MLC (-55º TO +125ºC)

HS SERIES

21

X7R DIELECTRIC

HIGH VOLTAGE SPACE QUALITY MLC (-55º TO +125ºC)

HS SERIES

22

X7R DIELECTRIC

HIGH VOLTAGE SPACE QUALITY MLC (-55º TO +125ºC)

HS SERIES

23

1. The ceramic chip capacitors described in this section are the types used

in our other high voltage ceramic multilayer product lines.

2. Types BP, BR and BZ available as described in MIL-PRF-49467.

3. Group A and B screening per MIL-PRF-49467 available.

4. Ceramic chip capacitors are extremely sensitive to thermal shock damage

during installation. Wherever possible, processes involving infrared or

vapor phase soldering systems should be utilized.

5. Higher voltages available upon request

6. Where nickel barrier termination is required, end band length dimensions

may exceed the standard dimension listed.

Style Length (L)

Inches (mm)

Width (W)

Inches (mm)

Thickness (T) max

Inches (mm)

1515 .150 ±.015 (3.81 ±.38) .150 ±.015 (3.81 ±.38) .140 (3.55)

1812 .180 ±.020 (4.57 ±.51) .120 ±.015 (3.05 ±.38) .100 (2.54)

1825 .180 ±.020 (4.57 ±.51) .250 ±.020 (6.35 ±.51) .160 (4.07)

2020 .200 ±.020 (5.08 ±.51) .200 ±.020 (5.08 ±.51) .180 (3.55)

2225 .220 ±.020 (5.59 ±.51) .250 ±.020 (6.35 ±.51) .200 (5.08)

2520 .250 ±.020 (6.35 ±.51) .200 ±.020 (5.08 ±.51) .180 (4.57)

3333 .330 ±.030 (8.38 ±.76) .330 ±.030 (8.38 ±.76) .220 (5.59)

3530 .350 ±.030 (8.89 ±.76) .300 ±.030 (7.62 ±.76) .220 (5.59)

4040 .400 ±.030 (10.2 ±.76) .400 ±.030 (10.2 ±.76) .220 (5.59)

4540 .450 ±.030 (11.43 ±.76) .400 ±.030 (10.2 ±.76) .220 (5.59)

5440 .540 ±.030 (13.7 ±.76) .400 ±.030 (10.2 ±.76) .220 (5.59)

5550 .550 ±.030 (14.0 ±.76) .500 ±.030 (12.7 ±.76) .220 (5.59)

6560 .650 ±.030 (16.5 ±.76) .600 ±.030 (15.2 ±.76) .220 (5.59)

DIMENSIONS

RECOMMENDED SOLDER PAD PATTERN DIMENSIONS

Tolerance

J = ±5% C0G (NP0)

K = ±10%

M = ±20%

P = 0/+100%

Z = -20%/+80%

Style

1515, 2020, etc.

Voltage

First two digits are significant,

last digit is number of zeros,

i.e., 202=2000V

Dielectric

B or R = X7R

N = C0G (NP0)

Terminal Material

P = PdAg

S = Ag

E = Ag/Ni/SnPb Plate

C = Ag/Ni/Sn Plate

Group A Screening*

Add to part number if required

*MIL-PRF-49467

(subgroup 1)

except Corona

Capacitance Value

First two digits are significant,

last digit is number of zeros,

i.e., 472=4700pF

4540 B472 M202 P M

MARKING

Not applicable

As required by customer only.

CERAMIC CHIP OUTLINE DRAWING

FEATURES

PART NUMBER AND ORDERING INFORMATION

1515

1812

1825

2020

2225

2520

3333

3530

4040

4540

5440

5550

6560

5.20

5.90

6.50

7.00

8.68

10.91

11.51

12.88

14.21

16.51

18.92

19.80

0.205

0.232

0.256

0.276

0.342

0.430

0.453

0.507

0.559

0.650

0.745

0.780

1.90

2.30

2.80

3.30

4.98

7.11

7.61

8.88

10.15

10.41

12.82

13.20

0.075

0.091

0.110

0.130

0.196

0.280

0.300

0.350

0.400

0.410

0.505

0.520

4.34

3.70

6.90

5.62

6.80

5.62

9.27

8.51

11.05

13.59

16.13

0.171

0.146

0.272

0.221

0.268

0.221

0.365

0.335

0.435

0.535

0.635

1.65

1.80

1.85

1.90

1.95

2.00

2.03

3.05

3.30

0.065

0.071

0.073

0.075

0.077

0.079

0.080

0.120

0.130

L S

T

W

L

.010 - .030”

.010 - .040”

.030 - .060”

Bandwidth (BW)

Inches

BW

HIGH VOLTAGE CERAMIC CHIP (+125ºC)

Military Equivalent

24

C0G DIELECTRIC

HIGH VOLTAGE CERAMIC CHIP (+125ºC)

Military Equivalent

25

C0G DIELECTRIC

HIGH VOLTAGE CERAMIC CHIP (+125ºC)

Military Equivalent

26

X7R DIELECTRIC

HIGH VOLTAGE CERAMIC CHIP (+125ºC)

Military Equivalent

27

X7R DIELECTRIC

HIGH VOLTAGE CERAMIC CHIP (+125ºC)

Military Equivalent

28

1. Silver plated copper alloy terminal for easy soldering.

2. Mounting tabs are designed to minimize the effect of thermal

stress introduced by the differences in coefficient of thermal

expansion between the capacitor and the mounting surface.

3. Low ESR.

4. High current discharge capability.

5. Group A and B screening per MIL-PRF-49467 available .

6. Standard lead configuration is 'B'.(J) If lead configuration is

left out of part number the lead style is assumed to be 'B'.

Style Length (L)

Inches (mm)

Width (W)

Inches (mm)

Thickness (T) max

Inches (mm)

Tab (A) max

Inches (mm)

SM20 .150 ±.015 (3.81 ±.38) .150 ±.015 (3.81 ± .38) .130 (3.30) .100 (2.54)

SM21 .200 ±.020 (5.08 ±.51) .200 ±.020 (5.08 ± .51) .180 (4.57) .100 (2.54)

SM22 .250 ±.020 (6.35 ±.51) .200 ±.020 (5.08 ± .51) .180 (4.57) .100 (2.54)

SM23 .350 ±.030 (8.89 ±.76) .300 ±.030 (7.62 ± .76) .220 (5.59) .200 (5.08)

SM24 .450 ±.030 (11.43 ±.76) .400 ±.030 (10.20 ± .76) .220 (5.59) .300 (7.62)

SM25 .550 ±.030 (14.00 ±.76) .500 ±.030 (12.70 ± .76) .220 (5.59) .400 (10.2)

SM26 .650 ±.030 (16.50 ±.76) .600 ±.030 (15.20 ± .76) .220 (5.59) .500 (12.7)

SM30 .300 ±.030 (7.62 ±.76) .150 ±.015 (3.81 ± .38) .140 (3.55) .100 (2.54)

SM31 .400 ±.030 (10.20 ±.76) .200 ±.020 (5.08 ± .51) .130 (3.30) .100 (2.54)

SM33 .700 ±.030 (17.08 ±.76) .300 ±.030 (7.62 ± .76) .180 (4.57) .200 (5.08)

SM34 .900 ±.030 (22.90 ±.76) .400 ±.030 (10.20 ±. 76) .220 (5.59) .300 (7.62)

SM35 1.100 ±.030 (27.90 ±.76) .500 ±.030 (12.70 ±. 76) .220 (5.59) .400 (10.2)

SM36 1.350 ±.030 (33.00 ±.76) .600 ±.030 (15.20 ±. 76) .220 (5.59) .500 (12.7)

DIMENSIONS

STANDARD

Tolerance

J = ±5% C0G (NP0)

K = ±10%

M = ±20%

P = 0/+100%

Z = -20%/+80%

Style

SM24, etc.

Voltage

First two digits are

significant, last digit

is number of zeros,

i.e., 202=2000V

Dielectric

B = X7R

N = C0G (NP0)

Configuration

A=Config (L)

B=Config (J)

Group A

Screening*

Add to part

number if required

*MIL-PRF-49467

(subgroup 1)

except Corona

Capacitance Value

First two digits are significant,

last digit is number of zeros,

i.e., 472=4700pF

SM24 B472 M202 A M

MARKING

Not applicable

As required by

customer only.

PART NUMBER AND ORDERING INFORMATION

CAPACITOR OUTLINE DRAWING

FEATURES

(L) (J)

HIGH VOLTAGE L & J LEADED CERAMIC CAPACITOR

SM SERIES

29

C0G DIELECTRIC

HIGH VOLTAGE L & J LEADED CERAMIC CAPACITOR

SM SERIES

30

C0G DIELECTRIC

HIGH VOLTAGE L & J LEADED CERAMIC CAPACITOR

SM SERIES

31

X7R DIELECTRIC

HIGH VOLTAGE L & J LEADED CERAMIC CAPACITOR

SM SERIES

32

X7R DIELECTRIC

HIGH VOLTAGE L & J LEADED CERAMIC CAPACITOR

SM SERIES

33

Capacitance Value

First two digits are significant,

last digit is number of zeroes,

i.e., 472=4700pF

Voltage

30 =3000V

100 =10,000V

etc.

Tolerance

J = ±5% C0G (NP0)

K = ±10%

M = ±20%

P = 0/+100%

Z = -20%/+80%

PART NUMBER AND ORDERING INFORMATION

Style

D50, etc.

Dielectric

N = C0G (NP0)

W = X7R

Y = X5U

Group A Screening*

Add to part number if required

*MIL-PRF-49467 (subgroup 1)

except Corona

30 D50 W122 M M Q

Thickness: 3kV = 0.15 (3.81) Lead Type: Solder plated, copper-clad steel (CCFE)-

Inches (mm) max. 5kV = 0.20 (5.08) D30, D40: 0.025” (22GA)

7.5kV = 0.28 (7.11) D50 & Larger: 0.032” (20GA)

10kV = 0.35 (8.89)

15kV = 0.45 (11.43)

20kV = 0.55 (13.97)

30kV = 0.95 (24.13)

40kV = 1.20 (30.48)

50kV = 1.50 (38.10)

Disc ceramic capacitors made under strict quality control proce-

dures are a reliable component. Special attention is given to the

ceramic pressing operation to assure high and uniform ceramic

density.

These parts are manufactured for the quality conscious customer.

Parts are available screened to MIL-PRF-49467 established relia-

bility specification.

Higher-voltage parts may require further encapsulation to prevent surface breakdown. Parts should be cleaned and oven

dried at 85°C before further encapsulation. Silicone rubbers or an epoxy may be used. De-airing of encapsulants is recom-

mended. We recommend that a heat sink be attached to the lead between the soldering iron and the capacitor during installa-

tion soldering. Testing of higher-voltage parts before encapsulation may be done in a suitable dielectric fluid such as Freon.

INSTALLATION

DIELECTRIC COMPARISON

CERAMIC TYPE C0G (NP0) X7R X5U

Dissipation Factor 0.1% 2.5% 2.5%

Temperature Coefficient ±30ppm/ºC ±15% +22% -56%

Voltage Coefficient 0-20% N/A

Dielectric Withstanding

Voltage Test

3 to 15kV at 1.5x rated,

20 to 50kV at rated +10kV

3 to 15kV at 1.5x rated,

20 to 50kV at rated +10kV

3 to 15kV at 1.5x rated,

20 to 50kV at rated +10kV

Insulation Resistance

(25ºC)

100k megohms or

1k megohms-µF,

whichever is less

100k megohms or

1k megohms-µF,

whichever is less

10k megohms or

100 megohms-µF,

whichever is less

Operating Temperature

Range (rated voltage) -55ºC to +125ºC -55ºC to +125ºC -55ºC to +85ºC

MARKING

(D30) (All Other Sizes)

301M D50W122M

3kV 3kV

KEC KEC

Date Code Date Code

CAPACITOR OUTLINE DRAWING

FEATURES

No Leads

Add to part number if required

HIGH VOLTAGE DISC CERAMIC CAPACITOR

D SERIES

34

Disc

Style

D

Max.

S

±.030

C0G (NP0) X7R X5U

Min. Max. Min. Max. Min. Max.

D30 .30 .250 7.8pF 9.6pF 250pF 300pF 520pF 700pF

D40 .40 .250 20pF 25pF 630pF 770pF 1300pF 1800pF

D50 .50 .375 36pF 44pF 1100pF 1400pF 2400pF 3200pF

D75 .75 .375 80pF 98pF 2500pF 3100pF 5300pF 7200pF

D90 .90 .500 123pF 150pF 3800pF 4700pF 8200pF 11000pF

D100 1.00 .500 145pF 178pF 4600pF 5600pF 9700pF 13000pF

D120 1.20 .500 193pF 236pF 6000pF 7400pF 12900pF 17300pF

Disc

Style

D

Max.

S

±.030

30kVDC 40kDVC 50kVDC

X7R X7R X7R

Min. Max. Min. Max. Min. Max.

D30 .30 .250 20pF 30pF 18pF 22pF 10pF 20pF

D40 .40 .250 60pF 80pF 50pF 60pF 40pF 50pF

D50 .50 .375 110pF 140pF 80pF 100pF 70pF 80pF

D75 .75 .375 250pF 310pF 190pF 230pF 150pF 180pF

D90 .90 .500 380pF 470pF 290pF 350pF 230pF 280pF

D100 1.00 .500 460pF 560pF 340pF 420pF 270pF 330pF

D120 1.20 .500 600pF 740pF 450pF 550pF 360pF 440pF

D30 .30 .250 4.7pF 5.7pF 150pF 180pF 310pF 420pF

D40 .40 .250 12pF 15pF 380pF 460pF 810pF 1100pF

D50 .50 .375 21pF 26pF 670pF 820pF 1400pF 1900pF

D75 .75 .375 48pF 59pF 1500pF 1800pF 3200pF 4300pF

D90 .90 .500 74pF 90pF 2300pF 2800pF 4900pF 6600pF

D100 1.00 .500 87pF 107pF 2700pF 3300pF 5800pF 7800pF

D120 1.20 .500 116pF 141pF 3600pF 4400pF 7700pF 10400pF

D30 .30 .250 3.1pF 3.8pF 100pF 120pF 210pF 280pF

D40 .40 .250 8.1pF 9.9pF 250pF 310pF 540pF 720pF

D50 .50 .375 14pF 17pF 450pF 550pF 950pF 1300pF

D75 .75 .375 32pF 39pF 1000pF 1200pF 2100pF 2900pF

D90 .90 .500 49pF 60pF 1500pF 1900pF 3300pF 4400pF

D100 1.00 .500 58pF 71pF 1800pF 2200pF 3900pF 5200pF

D120 1.20 .500 77pF 94pF 2400pF 3000pF 5100pF 6900pF

D30 .30 .250 2.4pF 2.9pF 70pF 90pF 160pF 210pF

D40 .40 .250 6.1pF 7.4pF 190pF 230pF 400pF 540pF

D50 .50 .375 10.7pF 13.1pF 330pF 410pF 710pF 960pF

D75 .75 .375 24pF 29pF 750pF 920pF 1600pF 2200pF

D90 .90 .500 37pF 45pF 1200pF 1400pF 2500pF 3300pF

D100 1.00 .500 44pF 53pF 1400pF 1700pF 2900pF 3900pF

D120 1.20 .500 58pF 71pF 1800pF 2200pF 3900pF 5200pF

D30 .30 .250 1.6pF 1.9pF 50pF 60pF 100pF 140pF

D40 .40 .250 4.0pF 4.9pF 130pF 150pF 270pF 360pF

D50 .50 .375 7.1pF 8.7pF 220pF 270pF 480pF 640pF

D75 .75 .375 16pF 20pF 500pF 610pF 1100pF 1400pF

D90 .90 .500 25pF 30pF 770pF 940pF 1600pF 2200pF

D100 1.00 .500 29pF 36pF 910pF 1100pF 1900pF 2600pF

D120 1.20 .500 39pF 47pF 1200pF 1500pF 2600pF 3500pF

D30 .30 .250 1.2pF 1.4pF 37pF 45pF 80pF 110pF

D40 .40 .250 3.0pF 3.7pF 100pF 120pF 200pF 270pF

D50 .50 .375 5.3pF 6.5pF 170pF 200pF 360pF 480pF

D75 .75 .375 12pF 15pF 380pF 460pF 800pF 1100pF

D90 .90 .500 18pF 22pF 580pF 700pF 1200pF 1600pF

D100 1.00 .500 22pF 27pF 680pF 830pF 1500pF 2000pF

D120 1.20 .500 29pF 35pF 910pF 1100pF 1900pF 2600pF

3K VDC

5K VDC

7.5K VDC

10K VDC

15K VDC

20K VDC

30K, 40K & 50K VDC

HIGH VOLTAGE DISC CERAMIC CAPACITOR

D SERIES

35

Capacitance Value

First two digits are significant,

last digit is number of zeros,

i.e., 102=1000pF

Voltage

30 = 3000V 100 =10,000V

50 = 5000 V 150 = 15,000 V

75 = 7500 V 200 =20,000 V

Tolerance

J = ±5% C0G (NP0)

K = ±10%

M = ±20%

P = 0/+100%

Z = -20%/+80%

Style

D50, etc.

Dielectric

N = C0G (NP0)

W = X7R

Y = X5U

Number of Sections

4X 100 D90 W102 K

1. Special lead configurations available.

2. Custom designs are available upon request.

D dimension - See previous page for

capacitance/voltage desired and resulting diameter.

L DIMENSION

INCHES (MM) MAX.

Number of

Selections

Voltage per Section

5k VDC 7.5k VDC 10k VDC 15k VDC 20k VDC

2.40 (10.16) .50 (12.70) .60 (15.24) .90 (22.86) 1.00 (25.40)

3.55 (13.97) .70 (17.78) .85 (21.59) 1.15 (29.21) 1.55 (39.07)

4.70 (17.78) .85 (21.59) 1.10 (27.94) 1.45 (36.83) 1.90 (48.26)

5.80 (20.32) 1.10 (27.94) 1.30 (33.02) 1.80 (45.72) 2.30 (58.42)

6.95 (24.13) 1.30 (33.02) 1.55 (39.07) 2.15 (54.61) 2.75 (69.85)

S ±0.030 (±.76) .13 (3.30) .18 (4.57) .23 (5.84) .33 (8.35) .43 (10.92)

MARKING

(D30) (All Other Sizes)

301M 4XD50W122M

3kV 3kV

KEC KEC

Date Code Date Code

PART NUMBER AND ORDERING INFORMATION

CAPACITOR OUTLINE DRAWINGFEATURES

HIGH VOLTAGE DISC MULTIPLIER STACKS

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Kemet:

30HV22N471JN 20HV25B563K 10HV20B103K 50HV24B102KC 50HV24B472M 05HV05B101KN 30HV22B102K

10HV21B332K 10HV33N303J 30HV14B103YN 30HV16B273K 05HV20B103KN 05HV10B103KN 30HV21B332K

05HV23B474KN 05HV21B104KM 05HV20B223KN 30HV11N121K 05HV24B105KN 30HV12N102KC

30HV13B102Y 50HV26B103Z 40HV64R103KC HT06AB224JN HT06CW104KN 20HV11B102PN 20HV13B103PN

20HV10B101PN 05HV22B204KM 10HV20B472K 10HV23B274K 20HV22B103ZN 20HV62R472K 20HV13B103KN

05HV14B104KN 05HV35B335KC 10HV24B104KCM 10HV12B103ZN 20HV24B104KCM 20HV23B103KCM

10HV24B154KN 05HV25B224MC 30HV23B153MN 30HV30N101JC 30HV30N221JC 30HV35N472JC

30HV30N220JC 30HV35N222JC 30HV30N331JC 30HV30N150JC 10HV36N823JC 20HV36N223JC

30HV30N470JC 10HV36N473JC 30HV35N103JC 10HV36N154JC 20HV24B683KN 20HV24B683KC

20HV26B184KN 20HV26B184KC 20HV35B274KN 20HV35B274KC 20HV24B683KCM 20HV35B274KCM

20HV26B184KCM 10HV20B102KN 10HV24B104KN 10HV25B224KN 05HV22B224KC 10HV64R104KC

30HV13B472M 20HV24B473MN HT06CW224KN 30HV23B472MN 30HV11N471KN 20HV13B103MN

30HV15B103KN 30HV14B103KN 30HV12N101KN 20HV11B102MN 10HV26B105KC HT06BN333JN

30HV35N152JC 30HV35N821JC 10HV24B474KNM 10HV26B105KNM 10HV31B473KC 10HV33B224KC

20HV20N100JC 20HV36B224KN 10HV23B473KN 10HV23B274KC 50HV33N561JN 10HV12B103ZC

50HV24B472MN 30HV14B103PN