ALUMINUM ELECTROLYTIC CAPACITORS KL Low Leakage Current series Standard low leakage current series. Compliant to the RoHS directive (2011/65/EU). VR KL Low Leakage Current Specifications Item Performance Characteristics Category Temperature Range -40 to +85C ( -40 to +105C product is also available upon request, but product rated at up to 50V less than or equal to 10 x 12.5 Lmm) Rated Voltage Range 6.3 to 100V Rated Capacitance Range 0.1 to 10000F Capacitance Tolerance 20% (M), 10% (K) at 120Hz 20C Leakage Current After 1 minute's (for case size 10 x 12.5 or smaller) or 2 minutes' (for case size 10 x 16 or larger) application of rated voltage at 20C, leakage current is not more than 0.002CV or 0.2 (A) whichever is greater. Rated voltage (V) Less than 10 x 12.5 tan (MAX.) 10 x 16 or more Tangent of loss angle (tan ) 6.3 0.18 0.21 10 0.15 0.17 16 0.12 0.14 25 0.08 0.12 35 0.08 0.12 50 0.08 0.10 63 0.07 0.08 100 0.07 0.08 120Hz,20C 35 1.5 2 (3) 50 1.5 2 (3) 63 1.5 2 (3) 100 1.5 2 (3) 120Hz For capacitance of more than 1000F, add 0.02 for every increase of 1000F. Rated voltage (V) Impedance ratio Z- 25C / Z+20C ZT / Z20 (MAX.) Z- 40C / Z+20C stability at Low Temperature 6.3 3 (4) 5 (8) 10 2 (3) 4 (6) 16 2 3 (4) 25 1.5 2 (4) Values in ( ) applicable to 10 x 16 or larger case size. Endurance The specifications listed at right shall be met when the capacitors are restored to 20C after the rated voltage is applied for 2000 hours at 85C, or 1000 hours at 105C. Shelf Life After storing the capacitors under no load at 85C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with white color letter on black sleeve. Capacitance change Within 15% of the initial capacitance value (6.3V : Within 20%) 150% or less than the initial specified value tan Less than or equal to the initial specified value Leakage current Radial Lead Type Type numbering system (Example : 10V 47F) d Sleeve (P.E.T.) d 1 2 3 4 5 6 7 8 9 10 11 12 13 14 U1 K2 L3 14 A5 46 77 08 M 9 D 10 D 11 A 12 N 13 A 14 UK L 1 A 4 7 0 M DD A N A Pressure relief vent Pressure (6.3up ) relief vent (6.3up ) L+ MAX. 15 MIN 4 MIN L+ MAX. 15 MIN 4 MIN (10 x 12.5 or smaller) 1.0 (10 x 16 or or greater) 1.5 (10 x 12.5 or smaller) 1.0 (10 x 16 or or greater) 1.5 (mm) D 5 6.3 8 10 12.5 16 P D d P 2.0 5 0.5 2.0 2.5 6.3 0.5 2.5 3.5 8 0.6 3.5 5.0 10 0.6 5.0 5.0 12.5 0.6 5.0 7.5 16 0.8 7.5 d 0.5 0.5 0.6 0.6 0.6 0.8 18 (mm) 7.5 18 0.8 7.5 0.8 * Please refer to page 20 about the end seal configuration. 1 Configuration Pb-free leadwire 1 Configuration D Pb-free PET sleeve 5D 6.3 5 8 * 10 6.3 12.5 to 18 8 * 10 12.5 to 18 2 Configuration 1 2 Capacitance tolerance (M : 20%, K : 10%) 1 Configuration Capacitance tolerance Rated capacitance (47F) (M : 20%, K : 10%) voltage(47F) (10V) RatedRated capacitance Series name Rated voltage (10V) Type Series name 2 In case 105C unit is required Type P0.5 P0.5 D+0.5MAX. D+0.5MAX. Sleeve (P.E.T.) 2 In case 105C unit is required Pb-free leadwire DD Pb-free PET sleeve ED DD PD ED HD PD HD Frequency coefficient of rated ripple current Frequency 50Hz 120Hz 300Hz 1kHz 10kHz or more 0.1 to 68 0.75 1.00 1.35 1.57 2.00 100 to 680 0.80 1.00 1.23 1.34 1.50 1000 to 10000 0.85 1.00 1.10 1.13 1.15 Cap.(F) Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. Dimension table in next page. CAT.8100D ALUMINUM ELECTROLYTIC CAPACITORS KL series Dimensions V Cap.(F) 4.7 6.8 10 15 22 33 47 68 100 150 220 330 470 680 1000 1500 2200 3300 4700 6800 10000 Code 4R7 6R8 100 150 220 330 470 680 101 151 221 331 471 681 102 152 222 332 472 682 103 10 x 12.5 10 x 16 10 x 20 12.5 x 25 12.5 x 25 16 x 25 16 x 31.5 18 x 35.5 18 x 40 V Cap.(F) 0.1 0.15 0.22 0.33 0.47 0.68 1 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 330 470 680 1000 1500 2200 Code 0R1 R15 R22 R33 R47 R68 010 1R5 2R2 3R3 4R7 6R8 100 150 220 330 470 680 101 151 221 331 471 681 102 152 222 6.3 0J 10 1A 390 480 650 910 1060 1270 1500 1760 1900 5 x 11 6.3 x 11 6.3 x 11 8 x 11.5 8 x 11.5 10 x 12.5 10 x 16 10 x 20 12.5 x 20 12.5 x 25 16 x 25 16 x 31.5 16 x 35.5 18 x 35.5 16 1C 110 150 180 250 310 400 530 600 810 1020 1200 1420 1650 1890 5 x 11 5 x 11 5 x 11 5 x 11 6.3 x 11 6.3 x 11 8 x 11.5 8 x 11.5 10 x 12.5 10 x 16 10 x 20 12.5 x 20 12.5 x 25 16 x 25 16 x 25 16 x 35.5 18 x 35.5 25 1E 55 70 85 100 140 160 230 280 370 420 550 730 910 1150 1300 1550 1820 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 6.3 x 11 6.3 x 11 8 x 11.5 8 x 11.5 10 x 12.5 10 x 16 10 x 20 12.5 x 20 12.5 x 25 16 x 25 16 x 31.5 16 x 35.5 18 x 40 45 55 70 85 100 140 170 230 280 370 400 490 660 810 1010 1270 1440 1720 35 50 63 100 1V 1H 1J 2A 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 6.3 x 11 8 x 11.5 8 x 11.5 10 x 12.5 10 x 16 10 x 20 10 x 20 12.5 x 20 12.5 x 25 16 x 25 16 x 31.5 18 x 35.5 2.1 3.2 4.7 7.0 10.1 14.5 19 23 28 45 50 65 90 110 136 180 220 290 370 470 580 730 910 Case size D x L (mm) Rated ripple 5 x 11 6.3 x 11 6.3 x 11 8 x 11.5 8 x 11.5 10 x 12.5 10 x 16 10 x 20 12.5 x 20 12.5 x 25 16 x 25 16 x 25 16 x 35.5 18 x 35.5 85 110 140 190 230 300 400 440 550 680 840 1100 1390 1580 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 6.3 x 11 6.3 x 11 8 x 11.5 8 x 11.5 10 x 12.5 10 x 16 10 x 20 12.5 x 20 12.5 x 20 16 x 25 16 x 25 16 x 31.5 18 x 40 1.1 1.6 2.3 3.5 5.0 7.3 10.7 16 23 40 45 55 70 95 110 165 190 250 320 420 490 600 760 910 1140 1480 5 x 11 6.3 x 11 6.3 x 11 8 x 11.5 8 x 11.5 10 x 12.5 10 x 16 10 x 20 12.5 x 20 12.5 x 20 12.5 x 25 16 x 25 16 x 31.5 18 x 35.5 59 75 100 115 170 200 270 330 450 550 710 850 1050 1330 Rated ripple current (mArms) at 85C 120Hz Rated ripple current (mArms) of 105C product : 70 percent value of rated ripple of 85C product at 105C 120Hz CAT.8100D Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Nichicon: UKL1C100MDD1TD UKL1C470MED1TD UKL1H010MDD1TD UKL1E6R8MDD1TD UKL1E6R8MDDANATD UKL1HR33MDD1TD UKL1H470MPD1TD UKL1H2R2MDD1TD UKL1H3R3MDD1TD UKL1HR15MDD1TD