Film Semi-Precision GlazeTM Resistors Resistors Thick Film Semi-Precision Make Possible Metal GlazeTM Power Resistors Thick Film Semi-Precision Metal performance GS-3 Series GlazeTM ge from 1 - 3MsurgeResistors Superior performance Power nces of 1%, 2%,range 5% Resistance from 1 - 3M GS-3 Series Standard tolerances of 1%, 2%, 5% 3W @25C; 2W @70C * Superior surge Power ratingperformance of 3W @25C; 2W @70C bon composite replacement * Resistance range from 1 - 3M Effective as carbon composite replacement * Standard tolerances of 1%, 2%, 5% * Power rating of 3W @25C; 2W @70C * Effective as carbon composite replacement OBSOLETE Data All Pb-free parts comply with EU Directive 2011/65/EU (RoHS2) Electrical Data ResistanceResistance Power Rating Part Number (Watts) Power Rating Range (Watts) (Ohms) 2.0 (@ 70C) 3.0 (@ 25C) GS-3 2.0 (@ 70C) 3.0 (@ 25C) Range (Ohms) 1.0 - 3M 50 (>10) 100, 200 ( 1) TCR 1000 1000 MIL-R-26 MIL-R-10509D MIL-R-22684 GS-3 30 100 200 100/50 0.5 1.0 Maximum2.0R Limits 2.0 0.50 0.50 0.20 0.20 1.50 1.50 0.20 0.50 - - 0.50 0.50 0.10 0.20 0.50 0.10 0.10 0.50 0.50 0.50 0.500.10 0.10 0.50 0.50 ppm/C Load life %R Short term overload Moisture ppm/C Temperature Cycling Solder Effect %R Termination Strength %R Vibration %R Operating Temperature 0.20 %RMIL-R-26 %R 30 %R %R %R %R %R %R General Note General Note 1000 D Wi Maximum R Limits Test Shock Maximum Dielectric Operating Withstanding Voltage Voltage (Volts) (Volts) 50 (>10) 100, 200 ( 1) 1, 2, 5 Environmental Data ycling ength TCR TCR (ppm/C) 1, 2, 5 1.0 - 3M ental Data rload Maximum Operating (ppm/C)Voltage (Volts) Tolerance Tolerance (%) (%) %R 0.5 0.20 0.20 MIL-R-10509D %R 1.0 1.50 0.40 200 1 0.20 0.20 2.0 0.10 1.50 -55C to +175C 0.20 0.50 - - 0.50 0.50 IRCElectronics reserves the right to make in product specification notice or liability. without notice or liability. TT reserves thechanges right to make changes in without product specification All information is subject to IRC's own data and is considered accurate at time of going to print. All information is subject to TT Electronics' own data and is considered accurate at time of going to print. Wire and Film Technologies Division * 4222 South Staples Street * Corpus Christi Texas 78411 USA Telephone: 361 992 7900 * Facsimile: 361 992 3377 * Website: www.irctt.com (c) TT Electronics plc 100 MIL-R-22684 0.10 A subsidiary of 0.20 TT electronics plc www.ttelectronicsresistors.com 0.50 GS-3 Series Issue October 2008 Sheet 1 of 3 09.15 Thick Film Semi-Precision Metal GlazeTM OBSOLETE GS-3 Series Power Resistors Thick Film Semi-Precision Metal GlazeTM Power Resistors Make Possible Physical Data L H d GS-3 W Dimensions (inches and (mm)) Type L W H od GS-3 0.515 0.010 (13.1 0.3) 0.225 0.008 (5.7 0.2) 1.50 0.125 (38.1 3.2) 0.032 0.002 (0.8128 0.05) Power Derating Chart Percent Rated Power 100 80 60 40 20 0 25 0 75 125 175 Ambient Temperature (C) Hot Spot Temperature +25C Ambient 200 Degrees (C) 175 150 125 100 75 50 25 0 0 25 50 75 100 Percent 25C Power Rating Wire and Film Technologies Division * 4222 South Staples Street * Corpus Christi Texas 78411 USA Telephone: 361 992 7900 * Facsimile: 361 992 3377 * Website: www.irctt.com GS-3 Series Issue October 2008 Sheet 2 of 3 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics' own data and is considered accurate at time of going to print. www.ttelectronicsresistors.com (c) TT Electronics plc 09.15 Thick Film Semi-Precision Metal GlazeTM OBSOLETE GS-3 Series Power Resistors Thick Film Semi-Precision Metal GlazeTM Power Resistors Make Possible Ordering Data Sample Part No. GS - 3 100 1000 J LF IRC Type GS = (Fixed Film Resistor High Stability) Power Rating 3 = 3W @ 25C / 2W @ 70C TCR Characteristics 50 = 50 pmm/C 100 = 100 pmm/C 200 = 200 pmm/C (available on values greater than 10 ohms) Resistance Value (100 ohms and greater - First 3 significant digits plus 4th digit multiplier) Example: 100 ohms = 1000, 1000 ohms = 1001, 150,000 ohms = 1503 (Less than 100 ohms - "R" is used to designate decimal) Example: 51 ohms = 51R0, 1 ohm = 1R00, 0.25 ohms = R250 Tolerance F = 1%, G = 2%, J = 5% RoHS Compliance LF = RoHS-compliant product Omit this code for SnPb finish Wire and Film Technologies Division * 4222 South Staples Street * Corpus Christi Texas 78411 USA Telephone: 361 992 7900 * Facsimile: 361 992 3377 * Website: www.irctt.com GS-3 Series Issue October 2008 Sheet 3 of 3 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics' own data and is considered accurate at time of going to print. www.ttelectronicsresistors.com (c) TT Electronics plc 09.15 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TT Electronics: GS3T0 1.62K 1%TR GS3T0 13K 5% GS3T0 3.6K 5%