(R) nd TrenchStop 2 IKW25N120T2 generation Series Low Loss DuoPack : IGBT in 2nd generation TrenchStop(R) with soft, fast recovery anti-parallel EmCon diode C * * Short circuit withstand time - 10s Designed for : - Frequency Converters - Uninterrupted Power Supply * TrenchStop(R) 2nd generation for 1200 V applications offers : - very tight parameter distribution - high ruggedness, temperature stable behavior * Easy paralleling capability due to positive temperature coefficient in VCE(sat) * Low EMI * Low Gate Charge * Very soft, fast recovery anti-parallel EmCon HE diode * Qualified according to JEDEC1 for target applications * Pb-free lead plating; RoHS compliant Complete product spectrum and PSpice Models : http://www.infineon.com/igbt/ Type IKW25N120T2 G E PG-TO-247-3 VCE IC VCE(sat),Tj=25C Tj,max Marking Code Package 1200V 25A 1.7V 175C K25T1202 PG-TO-247-3 Maximum Ratings Parameter Symbol Value Unit Collector-emitter voltage VCE 1200 V DC collector current (Tj=150C) IC A TC = 25C 50 TC = 110C 25 Pulsed collector current, tp limited by Tjmax ICpuls 100 Turn off safe operating area - 100 VCE 1200V, Tj 175C Diode forward current (Tj=150C) IF TC = 25C 40 TC = 110C 25 Diode pulsed current, tp limited by Tjmax IFpuls 100 Gate-emitter voltage VGE 20 V tSC 10 s Ptot 349 W C Short circuit withstand time 2) VGE = 15V, VCC 600V, Tj, start 175C Power dissipation TC = 25C Operating junction temperature Tj -40...+175 Storage temperature Tstg -55...+150 Soldering temperature, 1.6mm (0.063 in.) from case for 10s - 260 Wavesoldering only, temperature on leads only 1 2) J-STD-020 and JESD-022 Allowed number of short circuits: <1000; time between short circuits: >1s. Power Semiconductors 1 http://store.iiic.cc/ Rev. 2.1 Sep 08 (R) nd TrenchStop 2 IKW25N120T2 generation Series Thermal Resistance Parameter Symbol Conditions Max. Value Unit RthJC 0.43 K/W RthJCD 0.81 Characteristic IGBT thermal resistance, junction - case Diode thermal resistance, junction - case Thermal resistance, RthJA 40 junction - ambient Electrical Characteristic, at Tj = 25 C, unless otherwise specified Parameter Symbol Conditions Value min. typ. max. 1200 - - T j = 25C - 1.7 2.2 T j = 150 C - 2.1 - T j = 175 C - 2.2 - T j = 25C - 1.65 2.2 T j = 150 C - 1.7 - T j = 175 C - 1.65 - 5.2 5.8 6.4 Unit Static Characteristic Collector-emitter breakdown voltage V(BR)CES VGE=0V, IC=500A Collector-emitter saturation voltage VCE(sat) Diode forward voltage VF V V G E = 15 V, I C =25A VGE=0V, IF=25A Gate-emitter threshold voltage VGE(th) I C =1.0mA,V C E =V G E Zero gate voltage collector current ICES V C E = 12 00 V , VGE=0V mA T j = 25C - - 0.4 Tj=150C - - 4.0 T j = 175 C 20 Gate-emitter leakage current IGES V C E = 0 V , V G E =20V - - 200 nA Transconductance gfs V C E =20V, I C =25A - 13.5 - S Power Semiconductors 2 http://store.iiic.cc/ Rev. 2.1 Sep 08 (R) nd TrenchStop 2 IKW25N120T2 generation Series Dynamic Characteristic Input capacitance Ciss V C E =25V, - 1600 - Output capacitance Coss VGE=0V, - 155 - Reverse transfer capacitance Crss f=1MHz - 90 - Gate charge QGate V C C = 96 0 V, I C =40A - 120 - nC - 13 - nH - A pF V G E =15V Internal emitter inductance LE measured 5mm (0.197 in.) from case Short circuit collector current1) V G E =15V,t S C 1 0 s V C C = 600 V, T j , s t a r t = 2 5C IC(SC) 150 115 T j , s t a r t = 1 75 C Switching Characteristic, Inductive Load, at Tj=25 C Parameter Symbol Conditions Value min. typ. max. - 27 - - 20 - - 265 - - 95 - - 1.55 - Unit IGBT Characteristic Turn-on delay time td(on) Rise time tr Turn-off delay time td(off) Fall time tf Turn-on energy Eon Turn-off energy Eoff Total switching energy - 1.35 - Ets T j = 25C , V C C = 60 0 V, I C =25A, V G E = 0 /1 5 V, R G = 1 6 .4 , L 2 ) =1 05nH, C 2 ) =39pF Energy losses include "tail" and diode reverse recovery. - 2.9 - Diode reverse recovery time trr T j = 25C , - 195 - Diode reverse recovery charge Qrr V R = 60 0 V , I F =25A, - 2.05 Diode peak reverse recovery current Irrm d i F /d t= 1050 A/s - 20 Diode peak rate of fall of reverse recovery current during t b dirr/dt - 475 ns mJ Anti-Parallel Diode Characteristic 1) 2) ns C A - A/s Rev. 2.1 Sep 08 Allowed number of short circuits: <1000; time between short circuits: >1s. Leakage inductance L a nd Stray capacity C due to dynamic test circuit in Figure E. Power Semiconductors 3 http://store.iiic.cc/ (R) nd TrenchStop 2 IKW25N120T2 generation Series Switching Characteristic, Inductive Load, at Tj=175 C Parameter Symbol Conditions Value min. typ. max. - 25 - - 24 - - 340 - - 164 - - 2.25 - Unit IGBT Characteristic - 2.05 - Ets T j = 175 C V C C = 60 0 V, I C =25A, V G E = 0 /1 5 V, R G = 1 6 .4 , L 1 ) =1 75nH, C 1 ) =67pF Energy losses include "tail" and diode reverse recovery. - 4.3 - Diode reverse recovery time trr T j = 175 C - 290 - ns Diode reverse recovery charge Qrr V R = 60 0 V , I F =25A, - 3.65 - C Diode peak reverse recovery current Irrm d i F /d t= 1000 A/s - 24 - A Diode peak rate of fall of reverse recovery current during t b dirr/dt - 330 Turn-on delay time td(on) Rise time tr Turn-off delay time td(off) Fall time tf Turn-on energy Eon Turn-off energy Eoff Total switching energy ns mJ Anti-Parallel Diode Characteristic 1) A/s Leakage inductance L a nd Stray capacity C due to dynamic test circuit in Figure E. Power Semiconductors 4 http://store.iiic.cc/ Rev. 2.1 Sep 08 (R) nd TrenchStop 2 IKW25N120T2 generation Series 100A tp=3s 100A TC=80C IC, COLLECTOR CURRENT IC, COLLECTOR CURRENT 10s 80A TC=110C 60A 40A Ic 20A 10A 50s 150s 500s 1A Ic 20ms DC 0A 10Hz 100Hz 1kHz 10kHz 0.1A 1V 100kHz f, SWITCHING FREQUENCY Figure 1. Collector current as a function of switching frequency (Tj 175C, D = 0.5, VCE = 600V, VGE = 0/+15V, RG = 12) 10V 100V 1000V VCE, COLLECTOR-EMITTER VOLTAGE Figure 2. Safe operating area (D = 0, TC = 25C, Tj 175C;VGE=15V) 350W 50A IC, COLLECTOR CURRENT Ptot, POWER DISSIPATION 300W 250W 200W 150W 100W 40A 30A 20A 10A 50W 0W 25C 50C 75C 100C 125C 150C TC, CASE TEMPERATURE Figure 3. Maximum power dissipation as a function of case temperature (Tj 175C) Power Semiconductors 0A 25C 75C 125C TC, CASE TEMPERATURE Figure 4. Maximum collector current as a function of case temperature (VGE 15V, Tj 175C) 5 http://store.iiic.cc/ Rev. 2.1 Sep 08 (R) nd TrenchStop 2 20V 80A 80A VGE=17V IC, COLLECTOR CURRENT IC, COLLECTOR CURRENT generation Series 100A 100A 15V 60A 13V 11V 9V 40A 7V 20A 20V VGE=17V 15V 60A 13V 11V 9V 40A 7V 20A 0A 0A 0V 1V 2V 3V 0V 4V 80A 70A 60A 50A 40A 30A 20A TJ=175C 25C 10A 0A 0V 2V 4V 6V 8V 10V 1V 3V 4V 12V 3.5V 3.0V IC=50A 2.5V 2.0V IC=25A 1.5V IC=12.5A 1.0V IC= 3A 0.5V 0.0V 0C VGE, GATE-EMITTER VOLTAGE Figure 7. Typical transfer characteristic (VCE=20V) Power Semiconductors 2V VCE, COLLECTOR-EMITTER VOLTAGE Figure 6. Typical output characteristic (Tj = 175C) VCE(sat), COLLECTOR-EMITT SATURATION VOLTAGE VCE, COLLECTOR-EMITTER VOLTAGE Figure 5. Typical output characteristic (Tj = 25C) IC, COLLECTOR CURRENT IKW25N120T2 50C 100C 150C TJ, JUNCTION TEMPERATURE Figure 8. Typical collector-emitter saturation voltage as a function of junction temperature (VGE = 15V) 6 http://store.iiic.cc/ Rev. 2.1 Sep 08 (R) nd TrenchStop 2 td(off) 100ns tf td(on) td(off) 100 ns tr 10A 20A 30A 10 ns 40A 100ns tf td(on) tr 0C 50C 100C Power Semiconductors 25 35 45 55 65 75 6.5V 6.0V max. 5.5V typ. 5.0V min. 4.5V 4.0V 3.5V 0C 150C TJ, JUNCTION TEMPERATURE Figure 11. Typical switching times as a function of junction temperature (inductive load, VCE=600V, VGE=0/15V, IC=25A, RG=16.4, Dynamic test circuit in Figure E) 15 RG, GATE RESISTOR Figure 10. Typical switching times as a function of gate resistor (inductive load, TJ=175C, VCE=600V, VGE=0/15V, IC=25A, Dynamic test circuit in Figure E) VGE(th), GATE-EMITT TRSHOLD VOLTAGE td(off) tr 5 IC, COLLECTOR CURRENT Figure 9. Typical switching times as a function of collector current (inductive load, TJ=175C, VCE=600V, VGE=0/15V, RG=16.4, Dynamic test circuit in Figure E) t, SWITCHING TIMES tf td(on) 10ns 10ns generation Series 1000 ns t, SWITCHING TIMES t, SWITCHING TIMES 1000ns IKW25N120T2 50C 100C 150C TJ, JUNCTION TEMPERATURE Figure 12. Gate-emitter threshold voltage as a function of junction temperature (IC = 1.0mA) 7 http://store.iiic.cc/ Rev. 2.1 Sep 08 (R) nd TrenchStop 2 IKW25N120T2 generation Series *) Eon and Ets include losses due to diode recovery Ets* 10.0mJ Eon* 5.0mJ Eoff E, SWITCHING ENERGY LOSSES E, SWITCHING ENERGY LOSSES *) Eon and Etsinclude losses due to diode recovery 0.0mJ 10A 20A 30A 7.5 mJ IC, COLLECTOR CURRENT Figure 13. Typical switching energy losses as a function of collector current (inductive load, TJ=175C, VCE=600V, VGE=0/15V, RG=16.4, Dynamic test circuit in Figure E) Eoff 2.5 mJ 15 25 35 45 55 65 75 *) Eon and Ets include losses due to diode recovery E ts* 3mJ E on* 2mJ E off 1mJ E, SWITCHING ENERGY LOSSES E, SWITCHING ENERGY LOSSES 5 RG, GATE RESISTOR Figure 14. Typical switching energy losses as a function of gate resistor (inductive load, TJ=175C, VCE=600V, VGE=0/15V, IC=25A, Dynamic test circuit in Figure E) *) E on and E ts include losses due to diode recovery 4mJ Eon* 5.0 mJ 0.0 mJ 40A Ets* 5.0mJ Ets* 2.5mJ Eoff Eon* 0mJ 0C 50C 100C 150C TJ, JUNCTION TEMPERATURE Figure 15. Typical switching energy losses as a function of junction temperature (inductive load, VCE=600V, VGE=0/15V, IC=25A, RG=16.4, Dynamic test circuit in Figure E) Power Semiconductors 0.0mJ 400V 500V 600V 700V VCE, COLLECTOR-EMITTER VOLTAGE Figure 16. Typical switching energy losses as a function of collector emitter voltage (inductive load, TJ=175C, VGE=0/15V, IC=25A, RG=16.4, Dynamic test circuit in Figure E) 8 http://store.iiic.cc/ Rev. 2.1 Sep 08 (R) nd TrenchStop 2 IKW25N120T2 generation Series Ciss 1nF 240V 960V 10V Coss 100pF Crss 5V 0V 0nC 50nC IC(sc), short circuit COLLECTOR CURRENT 10s tSC, 5s 12V 14V 16V 10V 20V 200A 150A 100A 50A 0A 18V VGE, GATE-EMITTETR VOLTAGE Figure 19. Short circuit withstand time as a function of gate-emitter voltage (VCE=600V, start at TJ 175C) Power Semiconductors 0V VCE, COLLECTOR-EMITTER VOLTAGE Figure 18. Typical capacitance as a function of collector-emitter voltage (VGE=0V, f = 1 MHz) 15s 0s 10pF 100nC QGE, GATE CHARGE Figure 17. Typical gate charge (IC=25 A) SHORT CIRCUIT WITHSTAND TIME c, CAPACITANCE VGE, GATE-EMITTER VOLTAGE 15V 12V 14V 16V 18V VGE, GATE-EMITTETR VOLTAGE Figure 20. Typical short circuit collector current as a function of gateemitter voltage (VCE 600V, Tj,start = 175C) 9 http://store.iiic.cc/ Rev. 2.1 Sep 08 (R) nd 30A 200V 15A 0A 0us 0.4us 0.8us 30A 400V 15A 200V D=0.5 0.2 0.1 R,(K/W) 0.083 0.116 0.213 0.014 0.05 -2 10 K/W 0.02 0.01 single pulse R1 , (s) -4 2.77*10 -3 3.21*10 -2 1.73*10 -1 2.77*10 R2 C1=1/R1 C2=2/R2 10ms 100ms 0V 0A 0us 1.2us t, TIME Figure 21. Typical turn on behavior (VGE=0/15V, RG=16.4, Tj = 175C, Dynamic test circuit in Figure E) -1 IC VCE IC 10 K/W 600V 45A IC, COLLECTOR CURRENT 45A 400V 0V ZthJC, TRANSIENT THERMAL RESISTANCE generation Series VCE 600V 0.4us 0.8us 1.2us t, TIME Figure 22. Typical turn off behavior (VGE=15/0V, RG=16.4, Tj = 175C, Dynamic test circuit in Figure E) ZthJC, TRANSIENT THERMAL RESISTANCE VCE, COLLECTOR-EMITTER VOLTAGE TrenchStop 2 IKW25N120T2 D=0.5 0.2 R,(K/W) 0.198 0.301 0.287 0.019 -1 10 K/W 0.1 0.05 , (s) -4 3.31*10 -3 3.33*10 -2 1.68*10 -1 2.49*10 0.02 R 1 0.01 R2 single pulseC 1 = 1 / R 1 C 2 = 2 / R 2 -2 10 K/W -3 10 K/W 10s 100s 1ms tP, PULSE WIDTH Figure 23. IGBT transient thermal resistance (D = tp / T) Power Semiconductors 10s 100s 1ms 10ms 100ms tP, PULSE WIDTH Figure 24. Diode transient thermal impedance as a function of pulse width (D=tP/T) 10 http://store.iiic.cc/ Rev. 2.1 Sep 08 (R) nd TrenchStop 2 IKW25N120T2 generation Series TJ=175C Qrr, REVERSE RECOVERY CHARGE trr, REVERSE RECOVERY TIME 600ns 500ns 400ns TJ=175C 300ns 200ns TJ=25C 100ns 0ns 400A/s TJ=25C 1C 800A/s 1200A/s 1600A/s 2000A/s diF/dt, DIODE CURRENT SLOPE Figure 24. Typical reverse recovery charge as a function of diode current slope (VR=600V, IF=25A, Dynamic test circuit in Figure E) TJ=25C dirr/dt, DIODE PEAK RATE OF FALL OF REVERSE RECOVERY CURRENT REVERSE RECOVERY CURRENT Irr, 2C TJ=175C 35A 30A TJ=25C 25A 20A 15A 10A 5A 0A 3C 0C 400A/s 800A/s 1200A/s 1600A/s 2000A/s diF/dt, DIODE CURRENT SLOPE Figure 23. Typical reverse recovery time as a function of diode current slope (VR=600V, IF=25A, Dynamic test circuit in Figure E) 4C 400A/s 800A/s 1200A/s 1600A/s 2000A/s diF/dt, DIODE CURRENT SLOPE Figure 25. Typical reverse recovery current as a function of diode current slope (VR=600V, IF=25A, Dynamic test circuit in Figure E) Power Semiconductors -1200A/s -800A/s TJ=175C -400A/s -0A/s 400A/s 800A/s 1200A/s 1600A/s 2000A/s diF/dt, DIODE CURRENT SLOPE Figure 26. Typical diode peak rate of fall of reverse recovery current as a function of diode current slope (VR=600V, IF=25A, Dynamic test circuit in Figure E) 11 http://store.iiic.cc/ Rev. 2.1 Sep 08 (R) nd TrenchStop 2 IKW25N120T2 generation Series 100A 2.5V TJ=25C 80A IF=50A VF, FORWARD VOLTAGE IF, FORWARD CURRENT 175C 60A 40A 20A 0A 2.0V 25A 1.5V 1.0V 12.5A 3A 0.5V 0V 1V 2V 0.0V 3V VF, FORWARD VOLTAGE Figure 27. Typical diode forward current as a function of forward voltage Power Semiconductors 0C 50C 100C 150C TJ, JUNCTION TEMPERATURE Figure 28. Typical diode forward voltage as a function of junction temperature 12 http://store.iiic.cc/ Rev. 2.1 Sep 08 nd (R) TrenchStop 2 IKW25N120T2 generation Series PG-TO247-3 M M MAX 5.16 2.53 2.11 1.33 2.41 2.16 3.38 3.13 0.68 21.10 17.65 1.35 16.03 14.15 5.10 2.60 MIN 4.90 2.27 1.85 1.07 1.90 1.90 2.87 2.87 0.55 20.82 16.25 1.05 15.70 13.10 3.68 1.68 MIN 0.193 0.089 0.073 0.042 0.075 0.075 0.113 0.113 0.022 0.820 0.640 0.041 0.618 0.516 0.145 0.066 5.44 3 19.80 4.17 3.50 5.49 6.04 Power Semiconductors MAX 0.203 0.099 0.083 0.052 0.095 0.085 0.133 0.123 0.027 0.831 0.695 0.053 0.631 0.557 0.201 0.102 Z8B00003327 0 0 5 5 7.5mm 0.214 3 20.31 4.47 3.70 6.00 6.30 0.780 0.164 0.138 0.216 0.238 13 http://store.iiic.cc/ 0.799 0.176 0.146 0.236 0.248 17-12-2007 03 Rev. 2.1 Sep 08 (R) nd TrenchStop 2 IKW25N120T2 generation Series i,v tr r =tS +tF diF /dt Qr r =QS +QF IF tS QS Ir r m tr r tF 10% Ir r m QF dir r /dt 90% Ir r m t VR Figure C. Definition of diodes switching characteristics 1 2 r1 r2 n rn Tj (t) p(t) r1 r2 rn Figure A. Definition of switching times TC Figure D. Thermal equivalent circuit Figure B. Definition of switching losses Power Semiconductors 14 http://store.iiic.cc/ Figure E. Dynamic test circuit Rev. 2.1 Sep 08 (R) nd TrenchStop 2 IKW25N120T2 generation Series Published by Infineon Technologies AG 81726 Munich, Germany (c) 2008 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Power Semiconductors 15 http://store.iiic.cc/ Rev. 2.1 Sep 08