DC Fan San Ace DC 60mm DC Fan San Ace 60 General specifications Material Frame, impeller : Plastics Life Expectancy Varies for each model (Survival rate: 90% at 60, rated voltage,and continuously run in a free air state) Motor Protection System Current blocking function (with reverse polarity protection) Dielectric Strength 50/60 Hz, 500VAC, 1 minute (between lead conductor and frame) Noise Measurement Method Measured at 1m from the air inlet Operating Temprature Range Varies for each model (Non-condensing) Lead Wire G and S speed red, black, sensor yellow Mass 110g 38mm thick Specifications Model No. 9G0612G102(1021) 9G0612S102(1021) 9G0624G102(1021) 9G0624S102(1021) 9G0648G102(1021) 9G0648S102(1021) Rated Voltage Operating Voltage Range Rated Current Rated Input Rated Speed Air Flow Static Pressure Noise Operating Temperature Range Life Expectancy V V A W min-1 m3/minCFM Pa inchH2O dBA h 12 7.013.8 24 14.027.6 48 2855.2 1.54 1.36 0.85 0.70 0.35 0.29 18.5 16.3 20.4 16.8 16.8 13.9 11,800 10,800 11,800 10,800 11,800 10,800 1.84 1.70 1.84 1.70 1.84 1.70 65 60 65 60 65 60 435 370 435 370 435 370 1,747 1.486 1.747 1.486 1.747 1.486 58 56 58 56 58 56 -10 60 40,000 The numbers in ( ) represent ribless models. Air Flow and Static Pressure Characteristics S speed 60mm 450 13.8V/27.6V/55.2V 12V/24V/48V 7V/14V/28V 0.4 0.8 1.2 1.6 2.0 2.4 Air Flow m3/min 9G0612G102(1021) 9G0624G102(1021) 9G0648G102(1021) Static PressurePa Static PressurePa G speed 550 500 450 400 350 300 250 200 150 100 50 0 400 13.8V/27.6V/55.2V 350 300 250 12V/24V/48V 7V/14V/28V 200 150 100 50 0 0.4 0.8 1.2 1.6 2 Air Flow m3/min 9G0612S102(1021) 9G0624S102(1021) 9G0648S102(1021)