DA100 SERIES
Transformers for Digital Audio Data Transmission
www.dc-dc.com
FEATURES
■Compatible with Leading Chip Sets
■2kVrms Isolation
■Standard Pinout
■Surface Mount Option
■CECC00802 IR Reflow Profile
■UL 94V-0 Package Materials
■Low Profile
■Suitable for Both 75 & 110Ω Circuits
DESCRIPTION
The Digital Audio Range of transformers is
designed to improve the balance of
transmitter and receiver circuitry in hi-fi
equipment, video games and other
applications requiring high-performance
digital audio transmission. Compliant with
AES/EBU recommendations for the digital
audio interface offering optimised shunt
capacitance between primary and secondar y
windings. Capable of operating over the
audio data rate frequency range, providing
isolation from 60Hz noise.
ABSOLUTE MAXIMUM RATINGS
Specifications typical at TA= 2 5 ° C
For tape and reel packaging details refer to datasheet NDC AN002.
SELECTION GUIDE
Order Code mH H Vµs dB dB
DA101 1:1 1.00 - 1.59 0.22 15 46.80 52.10
DA102 1:1 2.00 - 3.00 0.39 20 40.40 49.70 DIP
DA103 1:1 4.00 - 5.96 0.91 28 36.30 46.40
DA101M/R 1:1 1.00 - 1.59 0.22 15 46.80 52.10
DA102M/R 1:1 2.00 - 3.00 0.39 20 40.40 49.70 SM
DA103M/R 1:1 4.00 - 5.96 0.91 28 36.30 46.40
Operating free air temperature range 0°C to 70°C
Storage temperature range –40°C to 125°C
DA100 SERIES
Transformers for Digital Audio Data Transmission
C&D Technologies (NCL) Ltd
Tanners Drive, Blakelands North
Milton Keynes MK14 5BU, England
Tel: +44 (0)1908 615232
Fax:+44 (0)1908 617545
email: info@cdtechno-ncl.com
www: http://www.dc-dc.com
C&D Technologies (NCL), Inc.
8917 Glenwood Avenue, Raleigh
NC 27612, USA
Tel: +1 (919) 571-9405
Fax: +1 (919) 571-9262
email: info@us.cdtechno-ncl.com
C&D Technologies (NCL) Limited reserve the right to alter or improve the
specification, internal design or manufacturing process at any time, without
notice. Please check with your supplier or visit our web site to ensure that
you have the current and complete specification for your product before use.
© C&D Technologies (NCL) Limited 2000 NMP DA100.3
No part of this publication may be copied, transmitted or stored in a
retrieval system or reproduced in any way including, but not limited to,
photography, photocopy, magnetic or other recording means, without prior
written permission from C&D Technologies (NCL) Limited.
Instructions for use are available from www.dc-dc.com
MECHANICAL DIMENSIONS
All dimensions in mm XX.XX ±0.25mm. All pins on a 2.54mm pitch and within ±0.25mm of true position.
6 Pin DIP
6 Pin SM
DA101
XYYWW
8.89
1
3
1 1
6
4
6.35
3.44±0.50
0.30
0.20 0.63
0.53
10.16 5.08
DA103M
XYYWW
Top View
Top View
6.35
0.90
12.70
0.30
0.20
0.63
0.53
2.54
1
2
3
6
5
4
2.54
Ø1.20 +0.15
–0.00
1.60
2.54
1.00 11.50
1 1
9.52
9.52
8.89
